1968 Ford F-350 Pickup Air Intakes

Essential 1968 Ford F-350 Pickup Air Intakes

United Carb – Remanufactured Carburetor 1 Barrel (Part No.7-7523)

Remanufactured Carburetor 1 Barrel

from

$239.99
Made in the USA, this remanufactured carburetor is completely disassembled and all internal parts, such as gaskets, gas filters, needle/seats and accelerator plunger cups, are discarded. All metal castings are thoroughly cleaned and restored to OEM (original equipment manufacturer) finish. Then the carburetor is reassembled to OEM-quality standards using all new component parts. Each carburetor is flow tested to simulate actual engine conditions, and all internal and external adjustments are set to OEM specifications.
See More

Holley – Prem Street Carbs (Avengers) (Part No.0-80770)

Prem Street Carbs (Avengers)

from

$626.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.

Product Features:
  • Vibratory Polished For Good Looks
  • Optimized Street Calibration That Works Out Of The Box
  • Factory Preset Electric Choke For Easy Startups
  • Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
  • No Unnecessary Trips Back To The Parts Store
  • Limited Lifetime Warranty
  • 100% Wet Flow Tested By Holley Technicians
  • Arrives Ready To Run
See More

United Carb – Remanufactured Carburetor 2 Barrel (Part No.7-7421)

Remanufactured Carburetor 2 Barrel

from

$250.99
Made in the USA, this remanufactured carburetor is completely disassembled and all internal parts, such as gaskets, gas filters, needle/seats and accelerator plunger cups, are discarded. All metal castings are thoroughly cleaned and restored to OEM (original equipment manufacturer) finish. Then the carburetor is reassembled to OEM-quality standards using all new component parts. Each carburetor is flow tested to simulate actual engine conditions, and all internal and external adjustments are set to OEM specifications.
See More

Edelbrock – Performer 1407 Carburetor: 750 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (Part No.1407)

Performer 1407 Carburetor: 750 CFM, 4 Barrel, Square Bore, Manual Choke Inlet

from

$451.99
The Edelbrock 1407 Performer Series 750 CFM manual choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristic

Product Features:
  • Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
  • Manual Choke
  • 4 Barrel Count
  • Square Bore
  • Smooth Secondary Transition
  • Both Timed and Full Vacuum Ports
  • Includes PCV Outlet
See More

Carquest – Carburetor Choke Pull-Off (Part No.779-6106)

Carburetor Choke Pull-Off

from

$25.05
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • Designed and manufactured to our stringent quality standards at a certified facility, so you can install with confidence
  • Premium components and durable materials withstand harsh engine conditions to increase longevity and lifespan
  • Undergoes extensive testing and validation for proper performance and peak reliability
  • As a global manufacturer of automotive aftermarket products, we maintain complete quality control throughout the manufacturing process
See More

Carquest – Carburetor Choke Pull-Off (Part No.779-070)

Carburetor Choke Pull-Off

from

$13.05
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • Designed and manufactured to our stringent quality standards at a certified facility, so you can install with confidence
  • Premium components and durable materials withstand harsh engine conditions to increase longevity and lifespan
  • Undergoes extensive testing and validation for proper performance and peak reliability
  • As a global manufacturer of automotive aftermarket products, we maintain complete quality control throughout the manufacturing process
See More

Carquest – Carburetor Choke Pull-Off (Part No.779-139)

Carburetor Choke Pull-Off

from

$40.05
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • Designed and manufactured to our stringent quality standards at a certified facility, so you can install with confidence
  • Premium components and durable materials withstand harsh engine conditions to increase longevity and lifespan
  • Undergoes extensive testing and validation for proper performance and peak reliability
  • As a global manufacturer of automotive aftermarket products, we maintain complete quality control throughout the manufacturing process
See More

Carquest – Carburetor Choke Pull-Off (Part No.779-163)

Carburetor Choke Pull-Off

from

$38.05
Carquest distributes a full line of engine management products, providing the aftermarket with premium quality and comprehensive coverage.
See More

Wells Vehicle Electronics – Carburetor Tune-Up Kit (Part No.2G1897)

Carburetor Tune-Up Kit

from

$24.99
WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to OE designs. Every component either matches or improves on the OE design to ensure fast, easy installation, superior performance and reliability.
See More

Wells Vehicle Electronics – Carburetor Tune-Up Kit (Part No.2G1843)

Carburetor Tune-Up Kit

from

$45.99
WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to OE designs. Every component either matches or improves on the OE design to ensure fast, easy installation, superior performance and reliability.
See More

Wells Vehicle Electronics – Carburetor Tune-Up Kit (Part No.2G1802)

Carburetor Tune-Up Kit

from

$18.99
WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to OE designs. Every component either matches or improves on the OE design to ensure fast, easy installation, superior performance and reliability.
See More

Edelbrock – Carburetor Repair Kit #12750 Fits Most Holley 4160 Carburetors (Part No.12750)

Carburetor Repair Kit #12750 Fits Most Holley 4160 Carburetors

from

$43.99
Product Features:
  • The Edelbrock #12750 4160 Carburetor rebuild kit is for Holley, Demon and Quick Fuel Carburetors.
  • The kit comes with the necessary components to rebuild a 4160 style Carburetor.
See More

Mr. Gasket – Intake Gasket (Part No.222)

Intake Gasket

from

$38.49
Mr. Gasket Performance Intake Gaskets are manufactured from cellulose/nitrile composition gasket material. This is a low density material that conforms well to irregular surfaces and has very good crush resistance at high flange pressures. They provide excellent sealing and durability as the material is designed for sealing gasoline, oils, water and coolant in applications up to 350 degrees Fahrenheit. While die-cut for an excellent fit, they can be trimmed if necessary for modified port applications. Comes complete with front & rear manifold end seals. For original equipment replacement, high performance street, drag race and oval track.brbrFits all Ford 351M/400 – 4V or 4-Barrel heads.

Product Features:
  • Manufactured from cellulose/nitrile composition gasket material
  • Provides excellent sealing and durability
  • Die-cut for an excellent fit
  • Can be trimmed if necessary for modified port applications
  • Complete with manifold end seals
  • For OE replacement, high performance street, drag race and oval track use
See More

Felpro – INTAKE MANIFOLD GASKET SET (Part No.MS 90361)

INTAKE MANIFOLD GASKET SET

from

$25.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
  • ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
See More

Felpro – Engine Intake Manifold Gasket Set (Part No.MS 9361 B-1)

Engine Intake Manifold Gasket Set

from

$22.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for repair applications
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
  • Includes all parts needed to complete the repair
  • Includes all parts needed to complete the repair
See More

Edelbrock – Intake Manifold Gasket for 1985-1976 390-428 FE Fords (Part No.7224)

Intake Manifold Gasket for 1985-1976 390-428 FE Fords

from

$28.99
Product Features:
  • Clean Positive Seal
  • Embossed Silicone Bead Surrounding The Port
  • Matched To Manifolds And Cylinder Heads
See More

Edelbrock – Slingshot Dual-Carb Intake Manifold for 1938-53 Ford Flathead (Part No.1103)

Slingshot Dual-Carb Intake Manifold for 1938-53 Ford Flathead

from

$669.99
Edelbrock part #1103 Slingshot intake manifold for 1938-48 engines is a reproduction of the original intake manifold designed by Vic Edelbrock Sr. in 1938. The Slingshot is a real show stopper and even includes stainless acorn nuts for mounting the two ha

Product Features:
  • Slingshot Manifold
  • Dual Plane Type-3-Bolt Style Flange
  • 7.625 in. Front Height, 7.625 in. Center Height, 7.625 in. Rear Height
  • Satin Finish
  • Made In The USA
See More

Edelbrock – Performer Intake Manifold Small-Block Ford (Part No.3721)

Performer Intake Manifold Small-Block Ford

from

$394.99


Product Features:
  • For Idle to 5500 RPM Street-Driven Performance
  • Dual-Plane Low-Rise Intake w/180 deg. Firing Order
  • Patented Runner Design Ensures Broad Torque Curve
  • Excellent Throttle Response and Mid-Range Power
  • 50-State Street Legal if Correct Carburetor Used
See More

Edelbrock – Performer Truck 5.8L Intake Manifold Small-Block Ford (Part No.3881)

Performer Truck 5.8L Intake Manifold Small-Block Ford

from

$1078.99


Product Features:
  • For Idle to 5500 RPM Street-Driven Performance
  • Produced 34 ft/lbs. More Torque than Stock
  • Removable Plenum Cover for Runner Access
  • Base Manifold is CNC Matched to Upper Manifold
  • 50 State Street Legal for 1988 to 96 5.8L Engines
  • Upper Manifold ; Cover Powder-Coated Titanium Gray
  • Accepts All Stock Hardware
  • Match w/Other Power Packages for More Performance
See More

Edelbrock – Single-Quad Manifold and carb Kit for Small-Block Ford 289-302 (Part No.2033)

Single-Quad Manifold and carb Kit for Small-Block Ford 289-302

from

$1053.99
The Edelbrock #2033 Single-Quad Manifold and carb kit is designed for Small-Block Ford 289-302 applications. With a Manifold and Carb Kit, it’s easy to upgrade your induction system with the best combination of Edelbrock proven performance and looks in a

Product Features:
  • Satin Finish
  • Single-Quad Manifold
  • Thunder Series AVS2 800 cfm Carb
  • RPM Air-Gap Manifold
  • Made In The USA
See More

Felpro – Carburetor Mounting Gasket (Part No.60281)

Carburetor Mounting Gasket

from

$6.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Felpro – Carburetor Mounting Gasket (Part No.60058)

Carburetor Mounting Gasket

from

$7.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Felpro – Carburetor Mounting Gasket (Part No.60003)

Carburetor Mounting Gasket

from

$6.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Felpro – Carburetor Mounting Gasket (Part No.60390)

Carburetor Mounting Gasket

from

$20.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Felpro – Air Cleaner Mounting Gasket (Part No.60038)

Air Cleaner Mounting Gasket

from

$3.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific, providing unsurpassed quality for a seal you can trust
  • Validated for fit, form, and function
  • Engineered for the sealing repair environment
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Felpro – AIR CLEANER MOUNTING GASKET (Part No.60032)

AIR CLEANER MOUNTING GASKET

from

$2.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific, providing unsurpassed quality for a seal you can trust
  • Validated for fit, form, and function
  • Engineered for the sealing repair environment
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

1968 Ford F-350 Pickup Air Intakes

You count on your 1968 Ford F-350 Pickup to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Air Intakes. With 17 Air Intakes ranging in price from $1.49 to $2,024.99, you’re sure to find everything you need for your 1968 Ford F-350 Pickup.

Brands matter. If you want to shop a specific Air Intakes brand, we stock 5 different brands like Felpro, Edelbrock, and Carquest. 1968 Ford F-350 Pickup Air Intakes start as low as $1.49!

One of the best ways to find top quality OEM or aftermarket Air Intakes is by asking professionals. Short of that, you can shop with confidence thanks to our 36 extensive product reviews on 1968 Ford F-350 Pickup Air Intakes.

Did we mention you can order your Air Intakes from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Air Intakes inventory for your 1968 Ford F-350 Pickup below to get started!

Top-Rated Air Intakes Brands For Your 1968 Ford F-350 Pickup

Trusted Air Intakes OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1968 Ford F-350 Pickup running right for years to come. In our inventory you’ll find brands like Felpro, Edelbrock, Carquest, and even more.

Popular Felpro Air Intakes

You’ll find popular Felpro brand products across Air Cleaner Parts and Intake Manifold Parts. All are waiting to get your 1968 Ford F-350 Pickup back on the road. Some of the top-rated Felpro products in these categories are:
AIR CLEANER MOUNTING GASKET
from $2.49
(2)
AIR CLEANER MOUNTING GASKET
Air Cleaner Mount Gaskets
Engine Intake Manifold Gasket Set
from $25.99
(1)
Engine Intake Manifold Gasket Set
Intake Manifold Gasket Sets
Carburetor Mounting Gasket
from $2.79
(4)
Carburetor Mounting Gasket
Carburetor and Injector Mount Gaskets

Top-Rated Air Intakes


If are what you’re looking for, our inventory holds plenty. We stock brand Air Intakes for your 1968 Ford F-350 Pickup, and some of our most reviewed parts include:
Carburetor Mounting Gasket
from $3.49
(1)
Carburetor Mounting Gasket
Carburetor and Injector Mount Gaskets

FAQs for 1968 Ford F-350 Pickup Air Intakes

What are the most purchased Air Intakes for the 1968 Ford F-350 Pickup?

Out of 17 Air Intakes for the 1968 Ford F-350 Pickup, the most popular in our inventory are:
Carburetor Mounting Gasket
from $2.29
This product is not rated
Carburetor Mounting Gasket
Carburetor and Injector Mount Gaskets
Intake Manifold Gasket for 1985-1976 390-428 FE Fords
from $28.99
This product is not rated
Intake Manifold Gasket for 1985-1976 390-428 FE Fords
Intake Manifold Gasket Sets