1968 Chevrolet Corvette Control Arms

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

• Improves steering response
• Complete kit for 1 arm
• Heat treated steel bushings OR torsional rubber bushings
• Reduces vibration

MOOG® Problem Solver® products incorporate proven design and engineering features for like new steering ease of installation and longer life. MOOG is the preferred steering and suspension brand of professional technicians and NASCAR crew chiefs.

Product Features:

• Easy to install
• Restores like-new steering and handling
• Construction and design validated by MOOG engineers
• Loose or worn chassis parts can lead to premature tire wear
• Incorporates proven design and engineering features

For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

Product Features:

• Maintains Better Alignment While Driving
• Full Floating and Non Binding
• Fits Into the Remaining Stock Control Arms

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

• Reduces vibration
• Torsional rubber bushings
• UV resistant
• No Squeak

aFe Control is proud to release the PFADT Series, Poly Control Arm Bushing Kit, for the C6 Z06Corvette. OE factory bushings are known to deflect more than a ¼ inch in turns which equates to almost 1 degree of lost camber and unpredictable handling. The aFe Control Poly Control Arm Bushing Kit, will solve this, by virtually eliminating bushing deflection, while still maintaining a quiet, comfortable ride, suitable for street use. The kit includes, light weight, hard anodized 6061 T6 aluminum sleeves, specially grooved, graphite impregnated bushings, snap rings, and all hardware necessary for a complete installation. You will appreciate the 2 piece design allowing for a much easier installation, than 1 piece designs. The aFe Control kit even include s rear, lower shock mounts, setting it apart from the competition.

Product Features:

• Reduces Busing Deflection
• Improves Handling For A Comfortable Ride For Track Or Street Use
• 6061 Anodized T6 Alum. w/Micro-Porous Surface For Great Retention
• Specially Grooved Polyurethane Bushings

For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

Product Features:

• Maintains Better Alignment While Driving
• Full Floating and Non Binding
• Fits Into the Remaining Stock Control Arms

Control Arm Bushing

aFe Control is proud to release the PFADT Series, Solid Spherical Control Arm Bearing Set for the 97-13 Corvette. OE factory bushings are known to deflect more than a ¼ inch in turns which equates to almost 1 degree of lost camber and unpredictable handling. Serious racers finally have an engineered solution for solid spherical control arm bearings. The elimination of bushing deflection has a number of benefits. The camber required is reduced because no camber change is seen from bushing deflection, resulting in more consistent lap times and a reduction in tire wear. Steering response is greatly improved and becomes sharp, crisp and predictable in all situations. The aFe Control kit replaces all 18 control arm bushings with mono-ball, spherical joints to eliminate friction and deflection. With 108 total components this high quality kit features 6061-T6 aluminum bearing housings which feature a special, Mil spec high corrosion resistant anodizing, CNC machined heat treated 17-4 PH stainless steel shafts, and CNC machined 6061-T6 articulation spacers. The replaceable bearings are Teflon lined for minimum friction, zero maintenance and are manufactured by FK bearing in the USA. This kit is designed to maximize the performance of your race car suspension. Due to the nature of this race part there is an increase in road noise, therefore we do not recommend this for the casual street car and is highly recommended for dedicated track cars.

Product Features:

• Mono-Ball Spherical Joints Eliminates Friction And Deflection
• 6061-T6 Alum. Bearing Housings w/Mil Spec
• CNC Machined Heat Treated 17-4 PH Stainless Steel Shafts
• CNC Machines 6061-T6 Articulation Spacers

Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

• HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
• PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
• OE-STYLE DESIGN — Engineered to match or exceed OE requirements
• RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
• Metal rib design helps lock the inner tube within frame pocket
• Metal surfaces are phosphate coated for corrosion protection

aFe Control is proud to release the PFADT Series, Solid Spherical Control Arm Bearing Set for the 97-13 Corvette. OE factory bushings are known to deflect more than a ¼ inch in turns which equates to almost 1 degree of lost camber and unpredictable handling. Serious racers finally have an engineered solution for solid spherical control arm bearings. The elimination of bushing deflection has a number of benefits. The camber required is reduced because no camber change is seen from bushing deflection, resulting in more consistent lap times and a reduction in tire wear. Steering response is greatly improved and becomes sharp, crisp and predictable in all situations. The aFe Control kit replaces all 18 control arm bushings with mono-ball, spherical joints to eliminate friction and deflection. With 108 total components this high quality kit features 6061-T6 aluminum bearing housings which feature a special, Mil spec high corrosion resistant anodizing, CNC machined heat treated 17-4 PH stainless steel shafts, and CNC machined 6061-T6 articulation spacers. The replaceable bearings are Teflon lined for minimum friction, zero maintenance and are manufactured by FK bearing in the USA. This kit is designed to maximize the performance of your race car suspension. Due to the nature of this race part there is an increase in road noise, therefore we do not recommend this for the casual street car and is highly recommended for dedicated track cars.

Product Features:

• Reduces Busing Deflection
• For Both Track And Street Use
• Excellent Grease Retention
• Quiet Operation

aFe Control is proud to release the PFADT Series, Solid Spherical Control Arm Bearing Set for the 97-13 Corvette. OE factory bushings are known to deflect more than a ¼ inch in turns which equates to almost 1 degree of lost camber and unpredictable handling. Serious racers finally have an engineered solution for solid spherical control arm bearings. The elimination of bushing deflection has a number of benefits. The camber required is reduced because no camber change is seen from bushing deflection, resulting in more consistent lap times and a reduction in tire wear. Steering response is greatly improved and becomes sharp, crisp and predictable in all situations. The aFe Control kit replaces all 18 control arm bushings with mono-ball, spherical joints to eliminate friction and deflection. With 108 total components this high quality kit features 6061-T6 aluminum bearing housings which feature a special, Mil spec high corrosion resistant anodizing, CNC machined heat treated 17-4 PH stainless steel shafts, and CNC machined 6061-T6 articulation spacers. The replaceable bearings are Teflon lined for minimum friction, zero maintenance and are manufactured by FK bearing in the USA. This kit is designed to maximize the performance of your race car suspension. Due to the nature of this race part there is an increase in road noise, therefore we do not re commend this for the casual street car and is highly recommended for dedicated track cars.

Product Features:

• Reduces Busing Deflection
• For Both Track And Street Use
• Excellent Grease Retention
• Quiet Operation

For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

Product Features:

• Maintains Better Alignment While Driving
• Full Floating and Non Binding
• Fits Into the Remaining Stock Control Arms

aFe Control is proud to release the PFADT Series, Poly Control Arm Bushing Kit, for the C5 & C6 Corvette. OE factory bushings are known to deflect more than a ¼ inch in turns which equates to almost 1 degree of lost camber and unpredictable handling. The aFe Control Poly Control Arm Bushing Kit, will solve this, by virtually eliminating bushing deflection, while still maintaining a quiet, comfortable ride, suitable for street use. The kit includes, light weight, hard anodized 6061 T6 aluminum sleeves, specially grooved, graphite impregnated bushings, snap rings, and all hardware necessary for a complete installation. You will appreciate the 2 piece design allowing for a much easier installation, than 1 piece designs. The aFe Control kit even include s rear, lower shock mounts, setting it apart from the competition.

Product Features:

• Reduces Busing Deflection
• Improves Handling For A Comfortable Ride For Track Or Street Use
• 6061 Anodized T6 Alum. w/Micro-Porous Surface For Great Retention
• Specially Grooved Polyurethane Bushings

Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

• HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
• PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
• OE-STYLE DESIGN — Engineered to match or exceed OE requirements
• RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
• Metal rib design helps lock the inner tube within frame pocket
• Metal surfaces are phosphate coated for corrosion protection

CONTROL ARM BUSHING