2006 Chevrolet Corvette Control Arms

For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

Product Features:

• Maintains Better Alignment While Driving
• Full Floating and Non Binding
• Fits Into the Remaining Stock Control Arms

Control Arm Bushing

aFe Control is proud to release the PFADT Series, SKF performance wheel bearing for 1997-2008 Corvette C5/C6. This performance wheel bearing is designed to improve the performance, cornering and stability characteristics that race and super cars demand. The SKF X-Tracker is a performance-engineered hub unit consisting of a double row angular contact ball bearing arrangement in which the outboard row has a larger diameter and contains more balls than the inboard row. Designed as a direct fit installation, no modifications is necessary. The performance wheel bearing can be used with factory shock absorbers, or for a even better ride, try our Johnny O’Connell signature series shock upgrade.

Product Features:

• Engineered To Optimize The Factory Shock Absorber Damping
• 1 To 1.25 in. Of Drop
• Optimized Design For Both V6 and V8 Applications
• Powder coat Gloss Silver For Unbeatable Looks And Durability

aFe Control is proud to release the PFADT Series, Solid Spherical Control Arm Bearing Set for the 97-13 Corvette. OE factory bushings are known to deflect more than a ¼ inch in turns which equates to almost 1 degree of lost camber and unpredictable handling. Serious racers finally have an engineered solution for solid spherical control arm bearings. The elimination of bushing deflection has a number of benefits. The camber required is reduced because no camber change is seen from bushing deflection, resulting in more consistent lap times and a reduction in tire wear. Steering response is greatly improved and becomes sharp, crisp and predictable in all situations. The aFe Control kit replaces all 18 control arm bushings with mono-ball, spherical joints to eliminate friction and deflection. With 108 total components this high quality kit features 6061-T6 aluminum bearing housings which feature a special, Mil spec high corrosion resistant anodizing, CNC machined heat treated 17-4 PH stainless steel shafts, and CNC machined 6061-T6 articulation spacers. The replaceable bearings are Teflon lined for minimum friction, zero maintenance and are manufactured by FK bearing in the USA. This kit is designed to maximize the performance of your race car suspension. Due to the nature of this race part there is an increase in road noise, therefore we do not re commend this for the casual street car and is highly recommended for dedicated track cars.

Product Features:

• Reduces Busing Deflection
• For Both Track And Street Use
• Excellent Grease Retention
• Quiet Operation

aFe Control is proud to release the PFADT Series, Solid Spherical Control Arm Bearing Set for the 97-13 Corvette. OE factory bushings are known to deflect more than a ¼ inch in turns which equates to almost 1 degree of lost camber and unpredictable handling. Serious racers finally have an engineered solution for solid spherical control arm bearings. The elimination of bushing deflection has a number of benefits. The camber required is reduced because no camber change is seen from bushing deflection, resulting in more consistent lap times and a reduction in tire wear. Steering response is greatly improved and becomes sharp, crisp and predictable in all situations. The aFe Control kit replaces all 18 control arm bushings with mono-ball, spherical joints to eliminate friction and deflection. With 108 total components this high quality kit features 6061-T6 aluminum bearing housings which feature a special, Mil spec high corrosion resistant anodizing, CNC machined heat treated 17-4 PH stainless steel shafts, and CNC machined 6061-T6 articulation spacers. The replaceable bearings are Teflon lined for minimum friction, zero maintenance and are manufactured by FK bearing in the USA. This kit is designed to maximize the performance of your race car suspension. Due to the nature of this race part there is an increase in road noise, therefore we do not recommend this for the casual street car and is highly recommended for dedicated track cars.

Product Features:

• Mono-Ball Spherical Joints Eliminates Friction And Deflection
• 6061-T6 Alum. Bearing Housings w/Mil Spec
• CNC Machined Heat Treated 17-4 PH Stainless Steel Shafts
• CNC Machines 6061-T6 Articulation Spacers

aFe Control is proud to release the PFADT Series, Solid Spherical Control Arm Bearing Set for the 97-13 Corvette. OE factory bushings are known to deflect more than a ¼ inch in turns which equates to almost 1 degree of lost camber and unpredictable handling. Serious racers finally have an engineered solution for solid spherical control arm bearings. The elimination of bushing deflection has a number of benefits. The camber required is reduced because no camber change is seen from bushing deflection, resulting in more consistent lap times and a reduction in tire wear. Steering response is greatly improved and becomes sharp, crisp and predictable in all situations. The aFe Control kit replaces all 18 control arm bushings with mono-ball, spherical joints to eliminate friction and deflection. With 108 total components this high quality kit features 6061-T6 aluminum bearing housings which feature a special, Mil spec high corrosion resistant anodizing, CNC machined heat treated 17-4 PH stainless steel shafts, and CNC machined 6061-T6 articulation spacers. The replaceable bearings are Teflon lined for minimum friction, zero maintenance and are manufactured by FK bearing in the USA. This kit is designed to maximize the performance of your race car suspension. Due to the nature of this race part there is an increase in road noise, therefore we do not recommend this for the casual street car and is highly recommended for dedicated track cars.

Product Features:

• Reduces Busing Deflection
• For Both Track And Street Use
• Excellent Grease Retention
• Quiet Operation

CONTROL ARM BUSHING

For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

Product Features:

• Maintains Better Alignment While Driving
• Full Floating and Non Binding
• Fits Into the Remaining Stock Control Arms

aFe Control is proud to release the PFADT Series, Poly Control Arm Bushing Kit, for the C6 Z06Corvette. OE factory bushings are known to deflect more than a ¼ inch in turns which equates to almost 1 degree of lost camber and unpredictable handling. The aFe Control Poly Control Arm Bushing Kit, will solve this, by virtually eliminating bushing deflection, while still maintaining a quiet, comfortable ride, suitable for street use. The kit includes, light weight, hard anodized 6061 T6 aluminum sleeves, specially grooved, graphite impregnated bushings, snap rings, and all hardware necessary for a complete installation. You will appreciate the 2 piece design allowing for a much easier installation, than 1 piece designs. The aFe Control kit even include s rear, lower shock mounts, setting it apart from the competition.

Product Features:

• Reduces Busing Deflection
• Improves Handling For A Comfortable Ride For Track Or Street Use
• 6061 Anodized T6 Alum. w/Micro-Porous Surface For Great Retention
• Specially Grooved Polyurethane Bushings

The 461-401001-A aFe Control PFADT Series Spherical Rebuild offers the components to rebuild 1 PFADT series front upper control arm spherical bushing kit, for the 1997-2013 Chevrolet Corvette (C5/C6). If you would like to rebuild 2 front upper control arms, you will need to order 2 kits.

Product Features:

• Incl. Components To Service 1 Front Upper Control Arm
• 2 CNC Machines 17-4 PH Stainless Steel Shaft
• 2 Teflon Lined FK Bearings
• 4 Snap Rings

The 461-401001-A aFe Control PFADT Series Spherical Rebuild offers the components to rebuild 1 PFADT series front upper control arm spherical bushing kit, for the 1997-2013 Chevrolet Corvette (C5/C6). If you would like to rebuild 2 front upper control arms, you will need to order 2 kits.

Product Features:

• Incl. Components To Service 1 Rear Upper Control Arm
• 2 CNC Machined Heat Treated 17-4 PH Stainless Steel Shafts
• 2 Teflon Lined FK Bearings
• 4 Snap Rings

The 461-401001-A aFe Control PFADT Series Spherical Rebuild offers the components to rebuild 1 PFADT series front upper control arm spherical bushing kit, for the 1997-2013 Chevrolet Corvette (C5/C6). If you would like to rebuild 2 front upper control arms, you will need to order 2 kits.

Product Features:

• Incl. Components To Service 1 Rear Upper Control Arm
• 2 Teflon Lined FK Bearings
• 2 Snap Rings
• 0.5ml Bottle Loctite 620

The 461-401001-A aFe Control PFADT Series Spherical Rebuild offers the components to rebuild 1 PFADT series front upper control arm spherical bushing kit, for the 1997-2013 Chevrolet Corvette (C5/C6). If you would like to rebuild 2 front upper control arms, you will need to order 2 kits.

Product Features:

• Incl. Components To Service 1 Front Or Rear Lower Control Arm
• 2 Teflon Lined FK Bearings
• 2 Snap Rings
• 0.5ml Bottle Loctite 620

This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

• Direct replacement – fits and performs like the original equipment on specific vehicles
• Reliable fit – precision-engineered to match the design and dimensions of original components
• Durable construction – manufactured to strict standards using sturdy, safe materials
• Rigorously tested – thorough quality control measures ensure longevity

This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

• Direct replacement – fits and performs like the original equipment on specific vehicles
• Reliable fit – precision-engineered to match the design and dimensions of original components
• Durable construction – manufactured to strict standards using sturdy, safe materials
• Rigorously tested – thorough quality control measures ensure longevity

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

• Restores vehicle handling
• OE replacement
• Reduces vibration
• Reduces tire wear

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

• EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
• HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
• COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
• Construction and design validated by MOOG engineers
• Broad coverage for foreign and domestic applications
• R-Series (RK) products are the right choice for value-driven repair

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

• EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
• HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
• COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
• Construction and design validated by MOOG engineers
• Broad coverage for foreign and domestic applications
• R-Series (RK) products are the right choice for value-driven repair

This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

• Direct replacement – fits and performs like the original equipment on specific vehicles
• Reliable fit – precision-engineered to match the design and dimensions of original components
• Durable construction – manufactured to strict standards using sturdy, safe materials
• Rigorously tested – thorough quality control measures ensure longevity