1968 Chevrolet C20 Suburban Drivetrains

Essential Drivetrains for 1968 Chevrolet C20 Suburbans

USA Standard Gear – Standard Spider Gear Set For GM 10.5" 14 Bolt Truck (Part No.39022)

Standard Spider Gear Set For GM 10.5" 14 Bolt Truck

from

$318.99
Product Features:
  • Spider gear kit
  • Fits GM 10.5″ 14 bolt truck open differential
  • Includes two side gears, four pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
See More

National – Multi Purpose Seal (Part No.7412S)

Multi Purpose Seal

from

$14.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

National – Bearings (Part No.1308-L)

Bearings

from

$110.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Spicer – SPICER U-JOINT (Part No.5-1310-1X)

SPICER U-JOINT

from

$44.99
SPICER U-JOINT

National – Multi Purpose Seal (Part No.470380)

Multi Purpose Seal

from

$4.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Motive Gear – Differential Bearing Kit – Timken (Part No.R12RT)

Differential Bearing Kit - Timken

from

$106.99
Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

Product Features:
  • KIT BRG & SEAL GM 12 BLT TRK 8 7/8″
See More

National – Bearings (Part No.HM803146)

Bearings

from

$47.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – Spindle Nut For GM 10.5" 14 Bolt Truck, 1.935" I.D., 6 Holes (Part No.33510)

Spindle Nut For GM 10.5" 14 Bolt Truck, 1.935" I.D., 6 Holes

from

$76.99
Product Features:
  • Spindle nut
  • Fits GM 10.5″ 14 bolt truck
  • 6 holes
  • 1.935″ I.D.
See More

Yukon Gear – Full-Floating, Blank 35 Spline Diameter, Non-Drilled Axle Shaft For Dana 60 (Part No.21005)

Full-Floating, Blank 35 Spline Diameter, Non-Drilled Axle Shaft For Dana 60

from

$232.99
Full-floating, 35 spline diameter, non-drilled blank axle shaft for Dana 60. 40″ inches long. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H axles come with a one year warranty against manufacturing defects.
See More

Driveworks – Taper Bearing Cup (Part No.S-HM-88610)

Taper Bearing Cup

from

$6.49
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.331)

Greaseable Premium Universal Joint

from

$19.99
Backed by superior materials and rigorous testing, MOOG Heavy Duty universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • BUILT TO LAST — Rugged design specifically engineered for fleets, off-highway and commercial vehicles
  • STRONG AND DURABLE — Bearing cups are cold-formed, case-hardened and precision ground for strength and durability
  • KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
  • GREASEABLE DESIGN — Drilled and tapped grease fitting holes for easy servicing and cross trunnions with large grease reservoirs with radial grease channels for grease distribution
  • INHIBITS PREMATURE WEAR — Cross trunnions ground to a 15-25 RMS finish for a smooth surface free of microscopic grooves that can cause premature wear
  • RELIABLE PERFORMANCE — Internal anti-drainback valve integrated into thrust washer controls lubrication flow and prevents dry startup
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
See More

Felpro – DIFFERENTIAL GASKET (Part No.RDS 13391)

DIFFERENTIAL GASKET

from

$7.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

FAG US – SHAFT SEAL (Part No.SS2776)

SHAFT SEAL

from

$19.79
SHAFT SEAL

Yukon Gear – Bearing Race Driver (Part No.56009)

Bearing Race Driver

from

$188.99
Bearing race driver. No return.

Product Features:
  • Bearing race driver
  • Fits 382A race
  • All steel construction
See More

Powertrax – No-Slip Traction System (Part No.9207053000)

No-Slip Traction System

from

$591.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    FAG US – SHAFT SEAL (Part No.SS2960)

    SHAFT SEAL

    from

    $9.59
    SHAFT SEAL

    Yukon Gear – 10.5" GM 14 Bolt Truck Crush Sleeve (Part No.33108)

    10.5" GM 14 Bolt Truck Crush Sleeve

    from

    $7.99
    10.5″ GM 14 bolt truck crush sleeve, 1988 & OLDER. Approx 0.825″ long.

    Product Features:
    • Crush sleeve for 1988 and down GM 10.5″ 14 bolt truck
    • 0.825″ tall
    See More

    FAG US – BEARING (Part No.6206-2RSR)

    BEARING

    from

    $40.99
    BEARING

    Felpro – Drive Axle Shaft Flange Gasket (Part No.55350)

    Drive Axle Shaft Flange Gasket

    from

    $4.79
    Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

    Product Features:
    • Meets or exceeds all original equipment specifications
    • Application specific design to ensure a perfect fit
    • Unsurpassed quality you can trust
    • Validated for fit, form and function
    • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
    See More

    National – Multi Purpose Bearing (Part No.HB-88107-A)

    Multi Purpose Bearing

    from

    $44.99
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Controlled heat treating process for lasting performance and extended bearing life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    Powertrax – Grip PRO Traction System (Part No.GT436035)

    Grip PRO Traction System

    from

    $596.99
    For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!
    See More

    Yukon Gear – Spindle Nut Retainer, 2.030" I.D., 8 Bent Over TABS (Part No.33480)

    Spindle Nut Retainer, 2.030" I.D., 8 Bent Over TABS

    from

    $8.99
    Spindle nut retainer, 2.030″ I.D., 8 bent over tabs. This replaces Spicer part number 33733.

    Product Features:
    • Spindle nut retainer for Dana Spicer 60, 70, 70U and 70HD
    • 2.030″ I.D.
    • 8 bent over tabs
    See More

    Motive Gear – Differential Gear Install Kit (Part No.GM12IK)

    Differential Gear Install Kit

    from

    $69.99


    Product Features:
    • MINI INSTALL KIT GM 12BLT 8.875 TRUCK
    See More

    Dorman – Differential Pinion Yoke Assembly (Part No.697-542)

    Differential Pinion Yoke Assembly

    from

    $111.99
    Worn or damaged differential end yoke causing driveline vibrations? This direct replacement end yoke matches the original equipment part for a trustworthy repair and reliable performance.

    Product Features:
    • Direct replacement – this differential end yoke matches the fit and construction of the original yoke.
    • Excellent value – this replacement end yoke offers original equipment quality at a fraction of the price of dealer parts.
    • Quality materials – this end yoke is machined from cast iron for strength and is precision machined for reliability
    • Validated fit – this differential end yoke has been tested to confirm accurate fit
    See More

    Victor Reinz – Differential Cover Gasket (Part No.71-14868-00)

    Differential Cover Gasket

    from

    $8.79
    With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

    Product Features:
    • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
    See More

    Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6056)

    Center Support Bearing Motor Mount: Center, 1 Piece

    from

    $22.79
    Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 84-88; CHECKER 55-82; CHEV 60-12; DODGE 57-02; FORD 55-10; GMC 63-07; INTL 57-02; ISUZU 96-01; KW 81-18; MACK 80-90; MAZDA 87-94; MITS 87-09; OLDS 90-01; PLYM 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.

    Product Features:
    • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
    • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
    • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
    • For Years: 1955-2018
    • Weight approx: 3 Lbs
    • BEARING ID / BORE: 1.3780 INCH / 35 MM
    • CENTERLINE: 2.28 INCH / 58 MM
    • MOUNT WIDTH: 6.62 INCH / 168 MM
    • STYLE: ROUND FRAME
    • COMPLETE MOUNT
    See More

    Driveworks – Oil Seal Kit (Part No.S-5200)

    Oil Seal Kit

    from

    $6.79
    Value-priced seal meets all cataloged application requirements.

    Product Features:
    • Brand may vary by location
    See More

    National – Bearings (Part No.382S)

    Bearings

    from

    $18.79
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Crowned raceways and rollers to ensure even load distribution for maximum life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    Upgrade your 1968 Chevrolet C20 Suburban with Top-Quality Drivetrains

    When it comes to maintaining or upgrading your 1968 Chevrolet C20 Suburban, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Drivetrains are key to keeping your C20 Suburban functioning at its best. At Advance Auto Parts, we offer a wide selection of 111 Drivetrains for the 1968 Chevrolet C20 Suburban, designed to meet your needs without breaking the bank. From Universal Joint replacements to Differentials upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

    Affordable Prices and Wide Selection

    Shopping for Drivetrains for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Drivetrains for your 1968 Chevrolet C20 Suburban at great prices. Our Drivetrains inventory for this model ranges from just $3.99 to $1,566.99, with an average price of $130.09. Our 111 Drivetrains in stock come from 16 trusted brands, so you’re sure to find the right part for your 1968 Chevrolet C20 Suburban without overspending.

    Top Brands and High Customer Satisfaction

    Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1968 Chevrolet C20 Suburban, we stock popular OEM and aftermarket Drivetrains from top names like Valvoline, Spicer, Moog, and more. Valvoline Drivetrains start at just $14.49 and boast an impressive 5 stars average rating from customers. Spicer and Moog also bring quality to the table, with Drivetrains available starting at $19.99, and at an average 5 stars rating. With 2,503 customer reviews and counting, our 1968 Chevrolet C20 Suburban Drivetrains have a strong track record of reliability, ensuring you can trust your purchase.

    Explore Related Parts and More

    While you’re here, don’t forget to check out other essential categories that go hand in hand with Drivetrain upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1968 Chevrolet C20 Suburban is always ready to roll. We’re committed to providing you with everything you need to keep your C20 Suburban in top shape, all in one place. Start shopping confidently below for your 1968 Chevrolet C20 Suburban!

    Best-Selling Universal Joints for 1968 Chevrolet C20 Suburbans

    Enhance the driving experience in your Chevrolet with 13 quality Universal Joint components, starting at $4.49.

    Spicer – Universal Joint (Part No.5-153X)

    Universal Joint

    from

    $28.99
    When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
    See More

    MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.369)

    Greaseable Premium Universal Joint

    from

    $19.99
    Backed by superior materials and rigorous testing, MOOG Heavy Duty universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

    Product Features:
    • BUILT TO LAST — Rugged design specifically engineered for fleets, off-highway and commercial vehicles
    • STRONG AND DURABLE — Bearing cups are cold-formed, case-hardened and precision ground for strength and durability
    • KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
    • GREASEABLE DESIGN — Drilled and tapped grease fitting holes for easy servicing and cross trunnions with large grease reservoirs with radial grease channels for grease distribution
    • INHIBITS PREMATURE WEAR — Cross trunnions ground to a 15-25 RMS finish for a smooth surface free of microscopic grooves that can cause premature wear
    • RELIABLE PERFORMANCE — Internal anti-drainback valve integrated into thrust washer controls lubrication flow and prevents dry startup
    • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
    See More

    MOOG Driveline Products – Non-Greaseable Super Strength Universal Joint (Part No.269)

    Non-Greaseable Super Strength Universal Joint

    from

    $32.99
    Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

    Product Features:
    • BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
    • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
    • CORROSION PROTECTION — Exclusive MICRO SHIELDΓ┐ó coating protects against rust and corrosion
    • KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
    • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
    • STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
    See More

    MOOG Driveline Products – Greaseable Super Strength Universal Joint (Part No.280)

    Greaseable Super Strength Universal Joint

    from

    $32.99
    Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

    Product Features:
    • BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
    • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
    • CORROSION PROTECTION — Exclusive MICRO SHIELDΓ┐ó coating protects against rust and corrosion
    • GREASABLE DESIGN — Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
    • KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
    • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
    • STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
    See More

    MOOG Driveline Products – Greaseable Super Strength Universal Joint (Part No.232)

    Greaseable Super Strength Universal Joint

    from

    $36.99
    Backed by superior materials and rigorous testing, MOOG Super Strength® universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

    Product Features:
    • BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
    • CORROSION PROTECTION — Exclusive MICRO SHIELD coating protects against rust and corrosion
    • STRONG AND DURABLE — Cold-forged, case-hardened and precision-ground alloy steel crosses for durability
    • KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
    • GREASABLE DESIGN — Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
    • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
    • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
    See More

    MOOG Driveline Products – Non-Greaseable Super Strength Universal Joint (Part No.231)

    Non-Greaseable Super Strength Universal Joint

    from

    $41.99
    Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

    Product Features:
    • BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
    • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
    • CORROSION PROTECTION — Exclusive MICRO SHIELDΓ┐ó coating protects against rust and corrosion
    • KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
    • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
    • STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
    See More

    MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.331)

    Greaseable Premium Universal Joint

    from

    $19.99
    Backed by superior materials and rigorous testing, MOOG Heavy Duty universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

    Product Features:
    • BUILT TO LAST — Rugged design specifically engineered for fleets, off-highway and commercial vehicles
    • STRONG AND DURABLE — Bearing cups are cold-formed, case-hardened and precision ground for strength and durability
    • KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
    • GREASEABLE DESIGN — Drilled and tapped grease fitting holes for easy servicing and cross trunnions with large grease reservoirs with radial grease channels for grease distribution
    • INHIBITS PREMATURE WEAR — Cross trunnions ground to a 15-25 RMS finish for a smooth surface free of microscopic grooves that can cause premature wear
    • RELIABLE PERFORMANCE — Internal anti-drainback valve integrated into thrust washer controls lubrication flow and prevents dry startup
    • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
    See More

    Brute Force – Universal Joint (Part No.2-0053BF)

    Universal Joint

    from

    $8.39
    Universal Joint – Brute Force
    See More

    Neapco – Universal Joint (Part No.1-0154)

    Universal Joint

    from

    $6.49
    Universal Joint
    See More

    Neapco – Universal Joint (Part No.2-0053)

    Universal Joint

    from

    $5.39
    Universal Joint
    See More

    Neapco – Universal Joint (Part No.1-0153)

    Universal Joint

    from

    $4.49
    Universal Joint
    See More

    Spicer – Universal Joint (Part No.5-1350-1X)

    Universal Joint

    from

    $49.99
    Universal Joint

    Neapco – Universal Joint (Part No.2-0052)

    Universal Joint

    from

    $15.59
    Universal Joint
    See More

    Most Popular 1968 Chevrolet C20 Suburban Differentials

    Customize your Chevrolet with 59 Differentials products like Differential Oil, Differential Bearings, and Rear Housing Cover Gaskets, all priced under $1,566.99.

    Valvoline – DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart (Part No.822405)

    DEXRON - VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart

    from

    $14.49
    Valvoline DEXRON-VI/MERCON LV ATF is a full-synthetic transmission fluid formulated with advanced additive technology to meet and exceed the requirements of the General Motors DEXRON-VI specification. It is officially licensed and approved by GM and is fully back-serviceable and can be used wherever DEXRON-II and/or DEXRON-III are recommended. Recommended for use in the following applications: DEXRON-VI, DEXRON-III, DEXRON-II, and Allison C-4.

    Product Features:
    • Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions
    • Enhanced anti-shudder protection for smooth shifting and maximum power transfer
    • Developed with anti-wear technology to help improve transmission durability
    • Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
    See More

    Valvoline – DEX/MERC Automatic Transmission Fluid, 1 Gallon (Part No.773636)

    DEX/MERC Automatic Transmission Fluid, 1 Gallon

    from

    $35.99
    Valvoline DEX/MERC ATF is a high-quality transmission fluid formulated to meet the challenging demands many automatic transmissions. Its responsive low-temperature fluidity is beneficial in both electronic and hydraulic controlled transmissions and transaxles. Recommended for use in the following applications: MERCON®, DEXRON®-III, Ford M2C138-CJ and M2C166-H, Allison C-4 and TES-389, and Caterpillar TO-2.

    Product Features:
    • Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
    • Enhanced anti-shudder protection for smooth shifting and maximum power transfer
    • Developed with anti-wear technology to help improve transmission durability
    • Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
    See More

    National – Bearings (Part No.28622)

    Bearings

    from

    $17.49
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Crowned raceways and rollers to ensure even load distribution for maximum life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    National – Bearings (Part No.A-1011)

    Bearings

    from

    $372.99
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Matched cup and cone components ensures consistent quality and outstanding performance
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    National – Bearings (Part No.387A)

    Bearings

    from

    $22.99
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Crowned raceways and rollers to ensure even load distribution for maximum life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    Felpro – DIFFERENTIAL GASKET (Part No.RDS 6095-1)

    DIFFERENTIAL GASKET

    from

    $8.29
    Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

    Product Features:
    • Meets or exceeds all original equipment specifications
    • Application specific design to ensure a perfect fit
    • Unsurpassed quality you can trust
    • Validated for fit, form and function
    • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
    See More

    Yukon Gear – 3 Qt – 80W90 Conventional Gear Oil With Posi Additive (Part No.15003)

    3 Qt - 80W90 Conventional Gear Oil With Posi Additive

    from

    $57.99
    3 Qt. Penzoil 80W90 conventional gear Oil. W/ bottle of Posi additive.

    Product Features:
    • Includes three quarts of conventional oil and one 4oz bottle of Yukon positraction additive
    See More

    National – Multi Purpose Seal (Part No.9316)

    Multi Purpose Seal

    from

    $17.49
    National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Low swell in hydrocarbon fluids
    • Design type: spring loaded; multi-lip
    • Provides good low temperature capability
    • Temperature range: -40°F to 225°F; -40°C to 107°C
    • Delivers quality and reliable performance for every type of repair
    See More

    National – Bearings (Part No.KD-11786-Y)

    Bearings

    from

    $57.99
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Crowned raceways and rollers to ensure even load distribution for maximum life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    National – Bearings (Part No.HM88542)

    Bearings

    from

    $22.99
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Crowned raceways and rollers to ensure even load distribution for maximum life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    National – Bearings (Part No.HM803146)

    Bearings

    from

    $47.49
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Crowned raceways and rollers to ensure even load distribution for maximum life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    National – Bearings (Part No.HM88510)

    Bearings

    from

    $14.29
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Crowned raceways and rollers to ensure even load distribution for maximum life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    Yukon Gear – Redline Synthetic "Shock Proof" Oil With Positraction Additive – 4 Quarts (Part No.15005)

    Redline Synthetic "Shock Proof" Oil With Positraction Additive - 4 Quarts

    from

    $148.99
    Redline Synthetic “Shock Proof” Oil with positraction Additive. 4 Quarts.

    Product Features:
    • Includes four quarts of Redline Shockproof oil and one 4oz bottle of Yukon positraction additive
    See More

    National – Bearings (Part No.HM803110)

    Bearings

    from

    $22.99
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Crowned raceways and rollers to ensure even load distribution for maximum life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    Motive Gear – Differential Pinion Shim Kit (Part No.1118)

    Differential Pinion Shim Kit

    from

    $6.49


    Product Features:
    • DANA PRELOAD SHIMS (D60 & D70)
    See More

    Yukon Gear – Redline Synthetic "Shock Proof" Oil – 3 Quarts (Part No.15000)

    Redline Synthetic "Shock Proof" Oil - 3 Quarts

    from

    $99.99
    Redline Synthetic “Shock Proof” Oil. 3 Quarts.

    Product Features:
    • Includes three quarts of Redline Shockproof oil
    See More

    National – Bearings (Part No.382S)

    Bearings

    from

    $18.79
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Crowned raceways and rollers to ensure even load distribution for maximum life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    Driveworks – Oil Seal (Part No.S-9316)

    Oil Seal

    from

    $3.99
    Value-priced seal meets all cataloged application requirements.

    Product Features:
    • Brand may vary by location
    See More

    Yukon Gear – Redline Synthetic "Shock Proof" Oil – 4 Quarts (Part No.15004)

    Redline Synthetic "Shock Proof" Oil - 4 Quarts

    from

    $137.99
    Redline Synthetic “Shock Proof” Oil. 4 Quarts.

    Product Features:
    • Includes four quarts of Redline Shockproof oil
    See More

    Motive Gear – Differential Carrier Shim Kit (Part No.1106)

    Differential Carrier Shim Kit

    from

    $18.99


    Product Features:
    • CARRIER SHIM-DANA 60 & 70
    See More

    Powertrax – Grip PRO Traction System (Part No.GT436035)

    Grip PRO Traction System

    from

    $596.99
    For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!
    See More

    Richmond Gear – RngPnnInstlKt (Part No.83-1034-B)

    RngPnnInstlKt

    from

    $59.99
    RngPnnInstlKt

    Driveworks – Tapered Roller Bearing (Part No.S-HM-803110)

    Tapered Roller Bearing

    from

    $13.49
    Product Features:
    • Brand may vary by location
    See More

    Motive Gear – Differential Ring and Pinion (Part No.D60-373)

    Differential Ring and Pinion

    from

    $266.99


    Product Features:
    • DANA-60 R/P 3.73 STD MG (USES PRE-LOAD SHIMS)
    See More

    Yukon Gear – Bearing Race Driver Set, 21 Piece (Part No.56030)

    Bearing Race Driver Set, 21 Piece

    from

    $1566.99
    21 Piece bearing race driver set. (Box wt: 140lbs) No return.

    Product Features:
    • Bearing race driver set
    • 21 pieces
    • All steel construction
    See More

    Powertrax – Grip LOK Traction System (Part No.LK436035)

    Grip LOK Traction System

    from

    $684.99
    For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!
    See More

    Richmond Gear – RngPnn (Part No.79-0041-1)

    RngPnn

    from

    $613.99
    RngPnn

    Richmond Gear – RngPnn (Part No.79-0011-1)

    RngPnn

    from

    $587.99
    RngPnn

    Richmond Gear – RngPnn (Part No.79-0068-1)

    RngPnn

    from

    $587.99
    RngPnn

    Richmond Gear – RngPnn (Part No.79-0077-1)

    RngPnn

    from

    $587.99
    RngPnn

    Richmond Gear – RngPnn (Part No.79-0013-1)

    RngPnn

    from

    $538.99
    RngPnn

    Richmond Gear – Differential Ring And Pinion (Part No.69-0057-1)

    Differential Ring And Pinion

    from

    $379.99
    Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!

    Product Features:
    • For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
    • The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
    • Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
    • Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
    • Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
    See More

    Richmond Gear – RngPnn (Part No.69-0052-1)

    RngPnn

    from

    $360.99
    RngPnn

    Dorman – Differential Pinion Yoke Assembly (Part No.697-545)

    Differential Pinion Yoke Assembly

    from

    $313.99
    Worn or damaged differential end yoke causing driveline vibrations? This direct replacement end yoke matches the original equipment part for a trustworthy repair and reliable performance.

    Product Features:
    • Direct replacement – this differential end yoke matches the fit and construction of the original yoke.
    • Excellent value – this replacement end yoke offers original equipment quality at a fraction of the price of dealer parts.
    • Quality materials – this end yoke is machined from cast iron for strength and is precision machined for reliability
    • Validated fit – this differential end yoke has been tested to confirm accurate fit
    See More

    Dorman – Differential Pinion Yoke Assembly (Part No.697-537)

    Differential Pinion Yoke Assembly

    from

    $289.99
    Worn or damaged differential end yoke causing driveline vibrations? This direct replacement end yoke matches the original equipment part for a trustworthy repair and reliable performance.

    Product Features:
    • Direct replacement – this differential end yoke matches the fit and construction of the original yoke.
    • Excellent value – this replacement end yoke offers original equipment quality at a fraction of the price of dealer parts.
    • Quality materials – this end yoke is machined from cast iron for strength and is precision machined for reliability
    • Validated fit – this differential end yoke has been tested to confirm accurate fit
    See More

    Motive Gear – Differential Ring and Pinion (Part No.D60-354)

    Differential Ring and Pinion

    from

    $275.99


    Product Features:
    • DANA-60 R/P 3.54 STD MG 24813-5X (USES PRE-LOAD SHIMS)
    See More

    Motive Gear – Differential Ring and Pinion (Part No.D60-410)

    Differential Ring and Pinion

    from

    $271.99


    Product Features:
    • DANA-60 R/P 4.10 STD MG (USES PRE-LOAD SHIMS)
    See More

    Motive Gear – Differential Ring and Pinion (Part No.D60-513)

    Differential Ring and Pinion

    from

    $259.99


    Product Features:
    • DANA-60 R/P 5.13 STD MG (USES PRE-LOAD SHIMS)
    See More

    Spicer – Differentil End Yoke (Part No.10025494)

    Differentil End Yoke

    from

    $241.99
    Differentil End Yoke

    Yukon Gear – Full-Floating, Blank 35 Spline Diameter, Non-Drilled Axle Shaft For Dana 60 (Part No.21005)

    Full-Floating, Blank 35 Spline Diameter, Non-Drilled Axle Shaft For Dana 60

    from

    $232.99
    Full-floating, 35 spline diameter, non-drilled blank axle shaft for Dana 60. 40″ inches long. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H axles come with a one year warranty against manufacturing defects.
    See More

    Dorman – Differential Pinion Yoke Assembly (Part No.697-553)

    Differential Pinion Yoke Assembly

    from

    $221.99
    Worn or damaged differential end yoke causing driveline vibrations? This direct replacement end yoke matches the original equipment part for a trustworthy repair and reliable performance.

    Product Features:
    • Direct replacement – this differential end yoke matches the fit and construction of the original yoke.
    • Excellent value – this replacement end yoke offers original equipment quality at a fraction of the price of dealer parts.
    • Quality materials – this end yoke is machined from cast iron for strength and is precision machined for reliability
    • Validated fit – this differential end yoke has been tested to confirm accurate fit
    See More

    Motive Gear – Differential Ring and Pinion (Part No.D60-586)

    Differential Ring and Pinion

    from

    $218.99
    Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
    See More

    Dorman – Differential Pinion Yoke Assembly (Part No.697-529)

    Differential Pinion Yoke Assembly

    from

    $203.99
    Worn or damaged differential end yoke causing driveline vibrations? This direct replacement end yoke matches the original equipment part for a trustworthy repair and reliable performance.

    Product Features:
    • Direct replacement – this differential end yoke matches the fit and construction of the original yoke.
    • Excellent value – this replacement end yoke offers original equipment quality at a fraction of the price of dealer parts.
    • Quality materials – this end yoke is machined from cast iron for strength and is precision machined for reliability
    • Validated fit – this differential end yoke has been tested to confirm accurate fit
    See More

    Motive Gear – Differential Spool (Part No.FSD60-35H)

    Differential Spool

    from

    $186.99


    Product Features:
    • FULL SPOOL DANA 60 35 SPLINE 4.10 & DOWN
    See More

    Motive Gear – Differential Bearing Kit – Timken (Part No.RA29RT)

    Differential Bearing Kit - Timken

    from

    $184.99
    Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

    Product Features:
    • DANA-60 TIMKEN – UP TO ’98 FORD
    See More

    Motive Gear – Differential Spool (Part No.FSD60-35L)

    Differential Spool

    from

    $181.99


    Product Features:
    • FULL SPOOL DANA 60 35 SPLINE 4.56 & UP
    See More

    Dorman – Differential Pinion Yoke Assembly (Part No.697-544)

    Differential Pinion Yoke Assembly

    from

    $181.99
    Worn or damaged differential end yoke causing driveline vibrations? This direct replacement end yoke matches the original equipment part for a trustworthy repair and reliable performance.

    Product Features:
    • Direct replacement – this differential end yoke matches the fit and construction of the original yoke.
    • Excellent value – this replacement end yoke offers original equipment quality at a fraction of the price of dealer parts.
    • Quality materials – this end yoke is machined from cast iron for strength and is precision machined for reliability
    • Validated fit – this differential end yoke has been tested to confirm accurate fit
    See More

    Spicer – Axle Shaft (Part No.620200)

    Axle Shaft

    from

    $159.99
    Axle Shaft

    Top Picks for 1968 Chevrolet C20 Suburban Drive Shafts and Axles

    Upgrade Chevrolet C20 Suburbans with top-quality Drive Shafts and Axles parts, including 23 OEM and aftermarket selections for your 1968 model.

    Spicer – Universal Joint (Part No.5-1310X)

    Universal Joint

    from

    $35.99
    You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you’re getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
    See More

    Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6038)

    Center Support Bearing Motor Mount: Center, 1 Piece

    from

    $34.49
    Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 84-88; CHEV 60-02; DODGE 57-02; FORD 55-07; GMC 63-02; INTL 57-02; KW 81-18; MACK 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.

    Product Features:
    • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
    • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
    • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
    • For Years: 1955-2018
    • Weight approx: 4 Lbs
    • BEARING ID / BORE: 1.5750 INCH / 40 MM
    • CENTERLINE: 2.48 INCH / 63 MM
    • MOUNT WIDTH: 6.62 INCH / 168 MM
    • STYLE: ROUND FRAME
    • NOT PICTURED: TWO DUST SHIELDS
    See More

    National – Multi Purpose Bearing (Part No.HB-206-FF)

    Multi Purpose Bearing

    from

    $46.49
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Controlled heat treating process for lasting performance and extended bearing life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    Driveworks – Universal Joint (Part No.DW-331BL)

    Universal Joint

    from

    $15.99
    DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).

    Product Features:
    • The cross is hot forged for the higher torque and horsepower
    • The bearing cups are made by cold forging, having higher strength and better rigidity
    • Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
    • Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
    • Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
    • Snap rings are held to strict tolerances to ensure proper cup position and retention
    • Nitrile rubber seals to optimize grease retention and reduce contamination
    See More

    Felpro – Drive Axle Shaft Flange Gasket (Part No.55350)

    Drive Axle Shaft Flange Gasket

    from

    $4.79
    Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

    Product Features:
    • Meets or exceeds all original equipment specifications
    • Application specific design to ensure a perfect fit
    • Unsurpassed quality you can trust
    • Validated for fit, form and function
    • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
    See More

    Spicer – Universal Joint (Part No.5-178X)

    Universal Joint

    from

    $42.99
    When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
    See More

    Spicer – Universal Joint (Part No.5-1350X)

    Universal Joint

    from

    $44.99
    You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you’re getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
    See More

    National – Multi Purpose Bearing (Part No.HB-88107-A)

    Multi Purpose Bearing

    from

    $44.99
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Controlled heat treating process for lasting performance and extended bearing life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6056)

    Center Support Bearing Motor Mount: Center, 1 Piece

    from

    $22.79
    Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 84-88; CHECKER 55-82; CHEV 60-12; DODGE 57-02; FORD 55-10; GMC 63-07; INTL 57-02; ISUZU 96-01; KW 81-18; MACK 80-90; MAZDA 87-94; MITS 87-09; OLDS 90-01; PLYM 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.

    Product Features:
    • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
    • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
    • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
    • For Years: 1955-2018
    • Weight approx: 3 Lbs
    • BEARING ID / BORE: 1.3780 INCH / 35 MM
    • CENTERLINE: 2.28 INCH / 58 MM
    • MOUNT WIDTH: 6.62 INCH / 168 MM
    • STYLE: ROUND FRAME
    • COMPLETE MOUNT
    See More

    National – Multi Purpose Seal (Part No.470380)

    Multi Purpose Seal

    from

    $4.49
    National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Low swell in hydrocarbon fluids
    • Design type: spring loaded; multi-lip
    • Provides good low temperature capability
    • Temperature range: -40°F to 225°F; -40°C to 107°C
    • Delivers quality and reliable performance for every type of repair
    See More

    Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6053)

    Center Support Bearing Motor Mount: Center, 1 Piece

    from

    $39.49
    Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to CHEV 60-02; DODGE 64-66; FORD 75-15; GMC 60-02;. Please verify your application.

    Product Features:
    • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
    • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
    • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
    • For Years: 1960-2015
    • Weight approx: 3 Lbs
    • BEARING ID / BORE: 1.5750 INCH / 40 MM
    • CENTERLINE: 2.28 INCH / 58 MM
    • MOUNT WIDTH: 6.62 INCH / 168 MM
    • NO STUDS
    See More

    Motive Gear – Drive Shaft Pinion Yoke (Part No.MG1310-6010)

    Drive Shaft Pinion Yoke

    from

    $117.99


    Product Features:
    • PINION YOKE
    • CAST:1310
    • U-BOLT STYLE
    See More

    Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6035)

    Center Support Bearing Motor Mount: Center, 1 Piece

    from

    $13.49
    Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to CHEV 58-02; GMC 55-02; INTL 57-02;. Please verify your application.

    Product Features:
    • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
    • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
    • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
    • For Years: 1955-2002
    • Weight approx: 2 Lbs
    • BEARING ID / BORE: 1.1811 INCH / 30 MM
    • CENTERLINE: 3.50 INCH / 89 MM
    • MOUNT WIDTH: 1.50 INCH / 38 MM
    • COMPLETE MOUNT
    See More

    National – Bearings (Part No.307-L)

    Bearings

    from

    $37.99
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Controlled heat treating process for lasting performance and extended bearing life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    Dorman – Differential Pinion Yoke Assembly (Part No.697-542)

    Differential Pinion Yoke Assembly

    from

    $111.99
    Worn or damaged differential end yoke causing driveline vibrations? This direct replacement end yoke matches the original equipment part for a trustworthy repair and reliable performance.

    Product Features:
    • Direct replacement – this differential end yoke matches the fit and construction of the original yoke.
    • Excellent value – this replacement end yoke offers original equipment quality at a fraction of the price of dealer parts.
    • Quality materials – this end yoke is machined from cast iron for strength and is precision machined for reliability
    • Validated fit – this differential end yoke has been tested to confirm accurate fit
    See More

    Driveworks – Drive Shaft Center Support (Part No.S-HB-88107-E)

    Drive Shaft Center Support

    from

    $42.99
    Product Features:
    • Brand may vary by location
    See More

    Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6027)

    Center Support Bearing Motor Mount: Center, 1 Piece

    from

    $5.29
    Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 84-88; CHECKER 55-82; CHEV 60-12; DODGE 87-97; GMC 67-05; MACK 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.

    Product Features:
    • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
    • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
    • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
    • For Years: 1955-2012
    • Weight approx: 1 Lbs
    • CUSHION INSERT ONLY
    • FOR COMPLETE MOUNT SEE PART 6056
    See More

    National – Bearings (Part No.305)

    Bearings

    from

    $40.99
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Controlled heat treating process for lasting performance and extended bearing life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    National – Bearings (Part No.88107-BVV)

    Bearings

    from

    $32.99
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Controlled heat treating process for lasting performance and extended bearing life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    National – Bearings (Part No.1308-L)

    Bearings

    from

    $110.99
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Controlled heat treating process for lasting performance and extended bearing life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    Spicer – SPICER U-JOINT (Part No.5-1310-1X)

    SPICER U-JOINT

    from

    $44.99
    SPICER U-JOINT

    FAG US – BEARING (Part No.6206-2RSR)

    BEARING

    from

    $40.99
    BEARING

    National – Shaft Repair Sleeve (Part No.99162)

    Shaft Repair Sleeve

    from

    $28.99
    National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Designed to repair damaged, grooved or worn shafts
    • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
    • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
    • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
    • Easy to install with removable flange and installation tool
    • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
    See More

    In-Demand Spindles for 1968 Chevrolet C20 Suburbans

    Select from 5 premium Spindles parts for your 1968 Chevrolet C20 Suburban, with prices ranging from $8.99 to $27.99.

    Yukon Gear – Spindle Nut Retainer, 2.030" I.D., 8 Bent Over TABS (Part No.33480)

    Spindle Nut Retainer, 2.030" I.D., 8 Bent Over TABS

    from

    $8.99
    Spindle nut retainer, 2.030″ I.D., 8 bent over tabs. This replaces Spicer part number 33733.

    Product Features:
    • Spindle nut retainer for Dana Spicer 60, 70, 70U and 70HD
    • 2.030″ I.D.
    • 8 bent over tabs
    See More

    Yukon Gear – Spindle Nut For Dana 60 & 70, 1.940" I.D., With Plastic Ring (Part No.33486)

    Spindle Nut For Dana 60 & 70, 1.940" I.D., With Plastic Ring

    from

    $26.99
    Spindle nut for Dana 60 & 70, 1.940″ I.D., with plastic ring. This replaces Spicer part number 39695.

    Product Features:
    • Spindle nut
    • Fits Dana Spicer 60 and 70
    • 1.940″ I.D.
    • Has plastic inner ring
    See More

    Yukon Gear – Spindle Nut Retainer For Dana 60 & 70, 1.830" I.D., 10 Outer TABS (Part No.33477)

    Spindle Nut Retainer For Dana 60 & 70, 1.830" I.D., 10 Outer TABS

    from

    $10.99
    Spindle nut retainer for Dana 60 & 70, 1.830″ I.D., 10 outer tabs. This replaces Spicer part number 30637.

    Product Features:
    • Spindle nut retainer for Dana Spicer 60, 70, 70U and 70HD
    • 1.830″ I.D.
    • 10 outer tabs
    See More

    Yukon Gear – Spindle Nut, 2.065" I.D., Six Slots (Part No.33484)

    Spindle Nut, 2.065" I.D., Six Slots

    from

    $27.99
    Spindle nut, 2.065″ I.D., six slots. This replaces Spicer part number 36635.

    Product Features:
    • Spindle nut
    • 6 slots
    • 2.065″ I.D.
    See More

    Yukon Gear – Spindle Nut For Dana 60, 1.750" I.D., 6 Sided (Part No.33476)

    Spindle Nut For Dana 60, 1.750" I.D., 6 Sided

    from

    $15.99
    Spindle nut for Dana 60, 1.750″ I.D., 6 sided. This replaces Spicer part number 30636.

    Product Features:
    • Spindle nut
    • Fits Dana Spicer 60
    • 6 sides
    • 1.750″ I.D.
    See More

    Most Sold 1968 Chevrolet C20 Suburban Transfer Cases

    Explore our best-selling Chevrolet parts for the 1968 C20 Suburban among 11 OEM and aftermarket options starting from $6.79.

    National – Multi Purpose Seal (Part No.9449)

    Multi Purpose Seal

    from

    $9.99
    National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Low swell in hydrocarbon fluids
    • Design type: spring loaded; multi-lip
    • Provides good low temperature capability
    • Temperature range: -40°F to 225°F; -40°C to 107°C
    • Delivers quality and reliable performance for every type of repair
    See More

    National – Multi Purpose Seal (Part No.5200)

    Multi Purpose Seal

    from

    $12.99
    National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Low swell in hydrocarbon fluids
    • Design type: spring loaded; multi-lip
    • Provides good low temperature capability
    • Temperature range: -40°F to 225°F; -40°C to 107°C
    • Delivers quality and reliable performance for every type of repair
    See More

    National – Multi Purpose Seal (Part No.9613S)

    Multi Purpose Seal

    from

    $7.99
    National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Low swell in hydrocarbon fluids
    • Design type: spring loaded; multi-lip
    • Provides good low temperature capability
    • Temperature range: -40°F to 225°F; -40°C to 107°C
    • Delivers quality and reliable performance for every type of repair
    See More

    National – Multi Purpose Seal (Part No.7412S)

    Multi Purpose Seal

    from

    $14.29
    National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Low swell in hydrocarbon fluids
    • Design type: spring loaded; multi-lip
    • Provides good low temperature capability
    • Temperature range: -40°F to 225°F; -40°C to 107°C
    • Delivers quality and reliable performance for every type of repair
    See More

    Driveworks – Oil Seal Kit (Part No.S-5200)

    Oil Seal Kit

    from

    $6.79
    Value-priced seal meets all cataloged application requirements.

    Product Features:
    • Brand may vary by location
    See More

    National – Shaft Repair Sleeve (Part No.99125)

    Shaft Repair Sleeve

    from

    $24.99
    National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Designed to repair damaged, grooved or worn shafts
    • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
    • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
    • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
    • Easy to install with removable flange and installation tool
    • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
    See More

    National – Bearings (Part No.N-1211-L)

    Bearings

    from

    $94.99
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Controlled heat treating process for lasting performance and extended bearing life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    National – Multi Purpose Seal (Part No.481181N)

    Multi Purpose Seal

    from

    $13.49
    National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Low swell in hydrocarbon fluids
    • Design type: spring loaded; multi-lip
    • Provides good low temperature capability
    • Temperature range: -40°F to 225°F; -40°C to 107°C
    • Delivers quality and reliable performance for every type of repair
    See More

    National – Multi Purpose Seal (Part No.470898)

    Multi Purpose Seal

    from

    $10.99
    National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Low swell in hydrocarbon fluids
    • Design type: spring loaded; multi-lip
    • Provides good low temperature capability
    • Temperature range: -40°F to 225°F; -40°C to 107°C
    • Delivers quality and reliable performance for every type of repair
    See More

    FAG US – SHAFT SEAL (Part No.SS2960)

    SHAFT SEAL

    from

    $9.59
    SHAFT SEAL

    Driveworks – Manual Transmission Input Shaft Seal (Part No.S-481181-N)

    Manual Transmission Input Shaft Seal

    from

    $8.49
    Product Features:
    • Brand may vary by location
    See More

    Top-Rated Drivetrains Brands For Your 1968 Chevrolet C20 Suburban

    Shop for the best-rated brands offering Drivetrains and other products for your 1968 Chevrolet C20 Suburbans. Below you’ll find some of our best rated Drivetrains from Valvoline, Spicer, and Moog, and more. Drivetrains from these brands that fit a 1968 C20 Suburban start at just $14.49 and are rated as high as 5 stars. OEM and aftermarket Drivetrains don’t get more top quality, durable, and affordable than from the brands below.

    Popular Valvoline 1968 Chevrolet C20 Suburban Drivetrains

    When it comes to maintaining or upgrading your 1968 Chevrolet C20 Suburban, using quality Drivetrains is essential to ensure durability and a perfect fit. Valvoline ticks all of those boxes. We offer a wide selection of Valvoline Drivetrains, specifically designed for the 1968 Chevrolet C20 Suburban. With over 2 Valvoline brand Drivetrains in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $14.49, with an average price of just $25.24. Plus, with over 19 customer reviews and an average rating of 5 stars, you can trust that our Valvoline Drivetrains will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

    DEX/MERC Automatic Transmission Fluid, 1 Gallon
    from
    $35.99

    (17)

    DEX/MERC Automatic Transmission Fluid, 1 Gallon

    “Equivalent to oem”

    DEXRON - VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart
    from
    $14.49

    (2)

    DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart

    “I’ve used this in my 2005 2500HD since I bought the truck with 20k on it now at 280k changed every other year maybe 40k I’d put on in two years,
    I pu”

    Popular Spicer 1968 Chevrolet C20 Suburban Drivetrains

    Spicer auto parts is one of the highest quality Drivetrain brands in the market. Any 1968 Chevrolet C20 Suburban owner should feel confident when installing genuine Spicer parts in their vehicle. To ensure the best fit and performance for your 1968 C20 Suburban, Advance Auto Parts carries a full inventory of 10 Spicer Drivetrains. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these Spicer Drivetrains range from $28.99 to $241.99, plus, with more than 26 customer reviews and an impressive 5 stars average rating, you can be confident the Fram Drivetrains below will deliver on both quality and value.

    Differental End Yoke
    from
    $159.99
    This product is not rated

    Differental End Yoke

    “”

    Differentil End Yoke
    from
    $241.99
    This product is not rated

    Differentil End Yoke

    “”

    Axle Shaft
    from
    $159.99
    This product is not rated

    Axle Shaft

    “”

    FAQs for 1968 Chevrolet C20 Suburban Drivetrains

    Which Drivetrains are best-sellers for 1968 Chevrolet C20 Suburbans?

    Out of 111 Drivetrains that fit 1968 Chevrolet C20 Suburbans, the following parts are the top sellers:

    What’s the price range for 1968 Chevrolet C20 Suburban Drivetrains?

    Drivetrain prices for the 1968 Chevrolet C20 Suburban start at $3.99 and go up to $1,566.99 for the most premium parts.

    What’s the average price of a Drivetrain for a 1968 Chevrolet C20 Suburban?

    The average price for Drivetrains for the 1968 Chevrolet C20 Suburban is $130.09. Keep in mind the variety of part types within our Drivetrain category so you are likely to find a wide range of prices across a variety of parts and components.

    Does Advance Auto Parts sell Drivetrains for other Chevrolet C20 Suburban model years?

    Yes, we currently carry Drivetrains for 7 model years of Chevrolet C20 Suburbans between 1967 and 1974. Drivetrains are bought most frequently for the following model years: 1974, 1973, 1972, 1971, 1970, 1969, and 1967.

    What are the cheapest Drivetrains for my 1968 Chevrolet C20 Suburban?

    The cheapest 1968 Chevrolet C20 Suburban Drivetrains we carry in stock are:

    What are the top-rated Drivetrains that fit the 1968 Chevrolet C20 Suburban?

    Out of 2,503 reviews by customers, our 1968 Chevrolet C20 Suburban Drivetrains have an average customer rating of . These are some of the highest-rated Drivetrain types for the 1968 Chevrolet C20 Suburban and their top-rated products:

    What types of Drivetrains do you sell for my 1968 Chevrolet C20 Suburban?

    As of 2/5/25, these are some of the most in-demand types of Drivetrains for a 1968 Chevrolet C20 Suburban:

    Can I get help with 1968 Chevrolet C20 Suburban Drivetrain orders?

    Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Drivetrains and more.

    What is your return policy for Chevrolet C20 Suburban Drivetrains?

    Advance Auto Parts keeps returns simple. For new Chevrolet C20 Suburban Drivetrains and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.