1967 Mercury Cougar Drivetrains
More 1967 Mercury Cougar Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1967 Mercury Cougar, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1967 Mercury Cougar Drivetrains
Motive Gear – Differential Pinion Shaft (Part No.B7AZ4211A)
Yukon Gear – Ford 9" 3.062" Aluminum Case, HD Dropout Housing (Part No.32034)
from
$729.99
9″ Yukon 3.062″ aluminum case, HD dropout housing with forged caps. The Yukon aluminum dropouts feature a adjuster lock which is offset 90 degrees, offering an uninterrupted bearing cap for higher strenth. Made from A356-T6 aluminum and featuring a through-bolt desgin, this dropout is built for high horsepower & tall tires.Rated up to 1000HP!
Product Features:
See More
Product Features:
- Fits Ford 9″
- 3.062″ carrier race diameter
- A356-T6 aluminum
- Thru-bolt design added strength
Yukon Gear – Trac Loc Spring For Ford 7.5" (Part No.33514)
from
$67.99
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 in
Product Features:
See More
Product Features:
- Trac Loc spring
- Fits Ford 7.5″
Yukon Gear – Standard Open Carrier Case – Ford 9" (Part No.20078)
from
$264.99
9″ standard Open case, bare, 28 & 31 spline, 2 or 4 pinion.
Product Features:
See More
Product Features:
- Standard open carrier case
- Fits Ford 9″ with 28 or 31 spline axles
- Does not include spider gears
MOOG Driveline Products – Universal Joint U-Bolt Kit (Part No.534-10)
from
$11.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- For U-Joints 375, 430, 434 & 498
- Fits 1-1/8″ bearings
Yukon Gear – Pinion Install Kit For Ford 7.5" Differential (Part No.13039)
from
$184.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.
Product Features:
See More
Product Features:
- Fits Ford 7.5″
- Included are pinion bearings and races, pinion seal, pinion nut, crush sleeve, complete pinion shim kit, and marking compound with brush.
Felpro – AXLE FLANGE GASKET (Part No.4828)
from
$3.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Yukon Gear – Pilot Bearing Retainer For Ford 9" (Part No.33255)
from
$11.99
Pilot bearing retainer for Ford 9″.
Product Features:
See More
Product Features:
- Pilot bearing retainer for Ford 9″
USA Standard Gear – Pinion Installation Kit For ’09 & Down Ford 8.8 (Part No.60009)
from
$119.99
8.8″ FORD 09 & DWN PINION KIT .
Product Features:
See More
Product Features:
- Fits 2009 and down Ford 8.8″
- Uses Koyo bearings and races
- Included are pinion bearings and races, pinion seal, pinion nut, crush sleeve, marking compound and brush.
Yukon Gear – 8" Ford Pinion Seal (Part No.30180)
Yukon Gear – Positraction Internals For 8.8" Ford With 31 Spline Axles (Part No.16016)
from
$329.99
Yukon positraction internals for 8.8″ Ford with 31 spline axles. This kit fits Yukon Gura Grip & Eaton positractions. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. This kit does not include clutches. All components come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Spider gear kit
- Fits Ford 8.8″ with Yukon Dura Grip positraction with 31 spline axles
- Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
Motive Gear – Differential Mini Spool (Part No.MS88-31)
Neapco – Universal Joint (Part No.1-0025)
Yukon Gear – 9" 31Spline (69-73Mustang & Others) Axle Seal (Part No.30211)
from
$16.99
9″ 31spline (69-73Mustang & OTHERS) axle seal (1.5″ shaft).Yukon Mighty seal.
Product Features:
See More
Product Features:
- Rear axle seal
- Fits 1969-1973 Ford Mustang with Ford 9″
Yukon Gear – Standard Open And Tracloc Cross Pin Block For 9" Ford (Part No.33336)
from
$30.99
Standard open and TracLoc cross pin block for 9″ Ford.
Product Features:
See More
Product Features:
- Cross pin block
- Fits Ford 9″
Yukon Gear – Axle Bearing For 9" Ford (Part No.10057)
from
$132.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. Axle bearing for 9″ Ford. 1.531″ I.D., 3.150″ O.D. This axle bearing & seal kit services one side only.
Product Features:
See More
Product Features:
- Axle bearing for Ford 9″
- Sealed design
- 3.150″ O.D.
- 1.531″ I.D.
- Services one side
Yukon Gear – 14 Plate Carbon Clutches For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron ‘Vette (Part No.16041)
from
$404.99
Product Features:
See More
- Clutch kit
- Fits Ford 8.8″, 1963-1979 Corvette, GM 12 bolt passenger car and truck, 8.2″, 8.5″ and 8.6″ Dura Grip positraction
- 14 piece kit
- Carbon fiber clutches
Dorman – Spindle Washer – I.D. 13/16 In. O.D. 1-21/32 In. Thickness 3/32 In. (sold by each) (Part No.618-013)
from
$1.99
This spindle nut washer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut washer matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.379)
from
$25.99
Backed by superior materials and rigorous testing, MOOG Premium universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- GREASABLE DESIGN — Greasable u-joints allow for new grease to flush out contaminants and moisture
- KEEPS DIRT OUT — Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Cross forging shape and flash provide easier installation and high strength
Motive Gear – Differential Pinion Shim Kit (Part No.2102)
Yukon Gear – One (1) Specialty Bearing Race To Adapt Small Bearing Journal Into A 3.250" Dropout (Part No.32157)
from
$51.99
One (1) specialty bearing race to adapt small bearing journal into a 3.250″ dropout. This adapter allows the use of a 28 or 31 spline carrier, positraction or locker in a 3.250″ dropout. This is a perfect solution if you are currently running 28 or 31 spline axles but are looking to upgrade to 35 spline later, or are stepping down from 35 spline but don’t want to buy a new dropout.
Product Features:
See More
Product Features:
- Carrier race
- Fits Ford 9″
- Conversion race to install small bearing carrier into 3.250″ dropout
Yukon Gear – Trac-Loc For Ford 8" Wtih 31 Spline Axles – Street Design (Part No.26004)
from
$819.99
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon-Trac Loc uses a nodular case, billet side hat, and forged internals for higher strength than stock Trac-Locs. The units use composite clutches for high performance and long life. All units are Rebuildable. Yukon offers a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Ford 8″ with 31 spline axles
- Trac Loc positraction
- Clutch style positraction
- Smooth design
- Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
- Fully rebuildable
- Assembled in the USA
Yukon Gear – O-Ring For 9" Ford (Part No.30028)
from
$14.99
O-ring for 9″ Ford.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Pinion support o-ring
- Fits Ford 9″
Powertrax – Grip PRO Traction System (Part No.GT109031)
from
$496.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!
See More
Felpro – Differential Carrier Gasket (Part No.RDS 55074)
from
$8.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Yukon Gear – Master Overhaul Kit For Ford Daytona 9" LM102910 Differential With Crush Sleeve Eliminator (Part No.14205)
from
$364.99
Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses carrier bearings & races with an I.D. of 1.780″ and an O.D. of 2.891″. This kit uses Timken bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pilot bearing, pinion seal, complete shim kit, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), Thread locking compound, and marking compound with brush. Yukon’s Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application.
Product Features:
See More
Product Features:
- Fits Ford 9″ with LM102940 carrier race and Daytona pinion support
- Included are Timken bearings and races, pinion bearings and races, pilot bearing, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve eliminator , thread locker, marking compound with brush, and gasket.
Spicer – SPICER U-JOINT (Part No.5-1310-1X)
from
$44.99
SPICER U-JOINT
Spicer – Universal Joint (Part No.5-153X)
from
$28.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More
Popular 1967 Mercury Cougar Drivetrains Categories
1967 Mercury Cougar Drivetrains
You count on your 1967 Mercury Cougar to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 448 Drivetrains ranging in price from $1.99 to $1,211.99, you’re sure to find everything you need for your 1967 Mercury Cougar.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 16 different brands like Moog, Driveworks, and National. 1967 Mercury Cougar Drivetrains start as low as $1.99!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 1,536 extensive product reviews on 1967 Mercury Cougar Drivetrains. Some of the top-rated Drivetrains products we carry are Greaseable Super Strength Universal Joint with 3.9 stars and Non-Greaseable Super Strength Universal Joint with 4.3 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1967 Mercury Cougar below to get started!
Top-Rated Drivetrains Brands For Your 1967 Mercury Cougar
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1967 Mercury Cougar running right for years to come. In our inventory you’ll find brands like Moog, Driveworks, National, and even more.
Popular Felpro Drivetrains
You’ll find popular Felpro brand products across Differentials. All are waiting to get your 1967 Mercury Cougar back on the road. Some of the top-rated Felpro products in these categories are:
Top-Rated MOOG Driveline Products Drivetrains
If MOOG Driveline Products are what you’re looking for, our inventory holds plenty. We stock MOOG Driveline Products brand Drivetrains for your 1967 Mercury Cougar, and some of our most reviewed MOOG Driveline Products parts include:
FAQs for 1967 Mercury Cougar Drivetrains
What are the most purchased Drivetrains for the 1967 Mercury Cougar?
Out of 448 Drivetrains for the 1967 Mercury Cougar, the most popular in our inventory are:
What are the top-rated 1967 Mercury Cougar Drivetrains?
Top-rated Drivetrains for your 1967 Mercury Cougar based on customer reviews/ratings are:
