1967 Mercedes-Benz 250S Belts and Hoses

Essential Belts and Hoses for 1967 Mercedes-Benz 250Ss

CRP – Hose – Fuel (Part No.4L30010819CRP)

Hose - Fuel

from

$93.78
Hose – Fuel

Cohline – Fuel Hose, per Meter (Part No.E5000106278COH)

Fuel Hose, per Meter

from

$10.70
Fuel Hose, per Meter

CRP – HOSE – FUEL (Part No.4L30010807CRP)

HOSE - FUEL

from

$466.04
HOSE – FUEL

CRP – HOSE – FUEL (Part No.4L30010814CRP)

HOSE - FUEL

from

$355.90
HOSE – FUEL

Gates – Premium Molded Coolant Hose (Part No.20801)

Premium Molded Coolant Hose

from

$23.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:
  • Specifically-engineered materials resist collapse under vacuum
  • Engineered to resist electrochemical degradation, the leading cause of hose failure
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
  • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Rein – AT Cooling Hose (Part No.J200038074RIN)

AT Cooling Hose

from

$37.17
AT Cooling Hose

Cohline – AT Cooling Hose (Part No.J200038074COH)

AT Cooling Hose

from

$61.69
AT Cooling Hose

Gates – Automotive XL« High Capacity V-Belt (Part No.9510)

Automotive XL« High Capacity V-Belt

from

$33.49
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:
  • Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
  • Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
  • Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
  • Resists oil, heat, ozone, weather and aging for improved belt life
  • Meets or exceeds SAE J636C specifications
See More

Dayco – Bottom Cog V-Belt; 36.5 Inch Long, Exact Fit Premium Quality (Part No.15365)

Bottom Cog V-Belt; 36.5 Inch Long, Exact Fit Premium Quality

from

$13.49
Dayco has combined raw-edge construction and a smooth top to ensure high performance on vehicles and drives that utilize V-belts. The Dayco high performance V-belt delivers more flexibility and increases airflow around the belt so it runs cooler and lasts longer. Three plies of neoprene impregnated fabric resist heat, oil and grease while a specially-formulated treatment of the polyester cord provides the strength, stability and reliability that are required for one of the most innovative, top-performing V-belts.

Product Features:
  •  Provides greater durability and flexibility – 35% stronger than all previous versions
  • Prevents electromechanical interference issues on modern vehicles
  •  Resists heat, oil and grease
See More

Driveworks – Automotive V-Belt, Driveworks (Part No.36513)

Automotive V-Belt, Driveworks

from

$5.49
The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.

Product Features:
  • This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
  • Polyester cords provide extreme tension-holding capability for longer belt life
  • The raw edge belt design delivers the maximum gripping power
  • The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration
See More

Dayco – V-Belt, Top Cog (Part No.17385)

V-Belt, Top Cog

from

$12.99
Dayco® High Performance V-Belt is the workhorse of the heavy-duty industry. Polyester cord provides maximum power transfer and tension holding capability for the life of the belt. The laminated construction helps absorb greater shock loads associated with diesel engines. These Dayco® High Performance V-Belt advantages translate into less downtime, lower maintenance costs, and increased dependability. Dayco’s High Performance V-Belt meets or exceeds SAE J636 and J637 specifications.

Product Features:
  • The High Performance V-Belt design delivers more flexibility and increases airflow around the belt, so it runs cooler and lasts longer than most competitive belts
  • Polyester cord provides maximum power transfer and tension holding capability for the life of the belt
  • The laminated construction helps absorb greater shock loads associated with diesel engines
  • Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds
See More

Gates – Notched V-Belt: 53.61" Long, 1 Strand, Exact Fit (Part No.9530)

Notched V-Belt: 53.61" Long, 1 Strand, Exact Fit

from

$37.49
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:
  • Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
  • Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
  • Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
  • Resists oil, heat, ozone, weather and aging for improved belt life
  • Meets or exceeds SAE J636C specifications
See More

Driveworks – Poly Rib Belt Serpentine Belt; 91.54 Long, 6 Rib Count (Part No.38517)

Poly Rib Belt Serpentine Belt; 91.54 Long, 6 Rib Count

from

$4.99
Dayco engineered to conform to high mileage, worn or misaligned drives without a sacrifice in quiet, long-lasting performance. Constructed with Aramid reinforced EPDM compounds, it delivers more than OE required quality… it delivers the solution to troublesome drive problems. Dayco Poly-Rib Belts meet or exceed SAE J1459 and SAE J2432 specifications.

Product Features:
  • Aramid noise resistant fibers embedded in the rubber make this belt run quieter in worn or misaligned pulleys
  • No-Noise Advanced Design EPDM rubber compound for quiet extended life
See More

Gates – Automotive XL« High Capacity V-Belt (Part No.9300)

Automotive XL« High Capacity V-Belt

from

$22.99
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:
  • Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
  • Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
  • Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
  • Resists oil, heat, ozone, weather and aging for improved belt life
  • Meets or exceeds SAE J636C specifications
See More

Cohline – Vacuum Hose, 3.5mm x 9mm (Part No.B202012368COH)

Vacuum Hose, 3.5mm x 9mm

from

$9.44
Vacuum Hose, 3.5mm x 9mm

Upgrade your 1967 Mercedes-Benz 250S with Top-Quality Belts and Hoses

When it comes to maintaining or upgrading your 1967 Mercedes-Benz 250S, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Mercedes-Benz or enhancing its overall performance, Belts and Hoses are key to keeping your 250S functioning at its best. At Advance Auto Parts, we offer a wide selection of 17 Belts and Hoses for the 1967 Mercedes-Benz 250S, designed to meet your needs without breaking the bank. From Serpentine and V Belt replacements to Vacuum Hoses upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 1967 Mercedes-Benz 250S at great prices. Our Belts and Hoses inventory for this model ranges from just $4.09 to $466.04, with an average price of $129.04. Our 17 Belts and Hoses in stock come from 4 trusted brands, so you’re sure to find the right part for your 1967 Mercedes-Benz 250S without overspending.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1967 Mercedes-Benz 250S is always ready to roll. We’re committed to providing you with everything you need to keep your 250S in top shape, all in one place. Start shopping confidently below for your 1967 Mercedes-Benz 250S!

Best-Selling Serpentine and V Belts for 1967 Mercedes-Benz 250Ss

Enhance the driving experience in your Mercedes-Benz with 3 quality Serpentine and V Belt components, starting at $22.99.

Gates – Notched V-Belt: 53.61" Long, 1 Strand, Exact Fit (Part No.9530)

Notched V-Belt: 53.61" Long, 1 Strand, Exact Fit

from

$37.49
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:
  • Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
  • Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
  • Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
  • Resists oil, heat, ozone, weather and aging for improved belt life
  • Meets or exceeds SAE J636C specifications
See More

Gates – Automotive XL« High Capacity V-Belt (Part No.9510)

Automotive XL« High Capacity V-Belt

from

$33.49
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:
  • Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
  • Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
  • Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
  • Resists oil, heat, ozone, weather and aging for improved belt life
  • Meets or exceeds SAE J636C specifications
See More

Gates – Automotive XL« High Capacity V-Belt (Part No.9300)

Automotive XL« High Capacity V-Belt

from

$22.99
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:
  • Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
  • Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
  • Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
  • Resists oil, heat, ozone, weather and aging for improved belt life
  • Meets or exceeds SAE J636C specifications
See More

Most Popular 1967 Mercedes-Benz 250S Vacuum Hoses

Customize your Mercedes-Benz with 1 Vacuum Hoses products like Vacuum Hoses, all priced under $9.44.

Cohline – Vacuum Hose, 3.5mm x 9mm (Part No.B202012368COH)

Vacuum Hose, 3.5mm x 9mm

from

$9.44
Vacuum Hose, 3.5mm x 9mm

Top Picks for 1967 Mercedes-Benz 250S Hose Clamps

Upgrade Mercedes-Benz 250Ss with top-quality Hose Clamps parts, including 1 OEM and aftermarket selections for your 1967 model.

Rein – Fuel Hose Clamp (Part No.E502012070RIN)

Fuel Hose Clamp

from

$4.09
Fuel Hose Clamp

In-Demand Engine Cooling Hoses for 1967 Mercedes-Benz 250Ss

Select from 1 premium Engine Cooling Hoses parts for your 1967 Mercedes-Benz 250S.

Gates – Premium Molded Coolant Hose (Part No.20801)

Premium Molded Coolant Hose

from

$23.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:
  • Specifically-engineered materials resist collapse under vacuum
  • Engineered to resist electrochemical degradation, the leading cause of hose failure
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
  • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Most Sold 1967 Mercedes-Benz 250S Fuel Hoses

Explore our best-selling Mercedes-Benz parts for the 1967 250S among 9 OEM and aftermarket options starting from $10.70.

CRP – Hose – Fuel (Part No.4L30010808CRP)

Hose - Fuel

from

$75.84
Hose – Fuel

CRP – HOSE – FUEL (Part No.4L30010807CRP)

HOSE - FUEL

from

$466.04
HOSE – FUEL

CRP – Hose – Fuel (Part No.4L30010817CRP)

Hose - Fuel

from

$408.17
Hose – Fuel

CRP – HOSE – FUEL (Part No.4L30010814CRP)

HOSE - FUEL

from

$355.90
HOSE – FUEL

CRP – Hose – Fuel (Part No.4L30010815CRP)

Hose - Fuel

from

$349.42
Hose – Fuel

CRP – Hose – Fuel (Part No.4L30010810CRP)

Hose - Fuel

from

$160.24
Hose – Fuel

CRP – Hose – Fuel (Part No.4L30010819CRP)

Hose - Fuel

from

$93.78
Hose – Fuel

CRP – Fuel Hose (Part No.E5000859958CRP)

Fuel Hose

from

$43.25
Fuel Hose

Cohline – Fuel Hose, per Meter (Part No.E5000106278COH)

Fuel Hose, per Meter

from

$10.70
Fuel Hose, per Meter

FAQs for 1967 Mercedes-Benz 250S Belts and Hoses

Which Belts and Hoses are best-sellers for 1967 Mercedes-Benz 250Ss?

Out of 17 Belts and Hoses that fit 1967 Mercedes-Benz 250Ss, the following parts are the top sellers:

What’s the price range for 1967 Mercedes-Benz 250S Belts and Hoses?

Belts and Hose prices for the 1967 Mercedes-Benz 250S start at $4.09 and go up to $466.04 for the most premium parts.

What’s the average price of a Belts and Hose for a 1967 Mercedes-Benz 250S?

The average price for Belts and Hoses for the 1967 Mercedes-Benz 250S is $129.04. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Belts and Hoses for other Mercedes-Benz 250S model years?

Yes, we currently carry Belts and Hoses for 2 model years of Mercedes-Benz 250Ss between 1966 and 1968. Belts and Hoses are bought most frequently for the following model years: 1968 and 1966.

What are the cheapest Belts and Hoses for my 1967 Mercedes-Benz 250S?

The cheapest 1967 Mercedes-Benz 250S Belts and Hoses we carry in stock are:

What types of Belts and Hoses do you sell for my 1967 Mercedes-Benz 250S?

As of 2/5/25, these are some of the most in-demand types of Belts and Hoses for a 1967 Mercedes-Benz 250S:

Can I get help with 1967 Mercedes-Benz 250S Belts and Hose orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Mercedes-Benz Belts and Hoses and more.

What is your return policy for Mercedes-Benz 250S Belts and Hoses?

Advance Auto Parts keeps returns simple. For new Mercedes-Benz 250S Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.