1966 Mercedes-Benz 250S Belts and Hoses
Find Your Specific 1966 Mercedes-Benz 250S Belts and Hoses
Below you will find various in-demand Mercedes-Benz Belts and Hoses, components and accessories for your 1966 250S. Advance Auto Parts has popular 250S parts like Serpentine and V Belts, Hose Clamps, Vacuum Hoses and more. You’ll also find aftermarket and OEM Belts and Hoses for other 250S model years including
1967
1968 and more. Select a category of 1966 Mercedes-Benz 250S Belts and Hoses below and start saving instantly.
Popular 1966 Mercedes-Benz 250S Belts and Hoses Categories
Essential Belts and Hoses for 1966 Mercedes-Benz 250Ss
Cohline – AT Cooling Hose (Part No.J200038074COH)
from
$61.69
AT Cooling Hose
Rein – AT Cooling Hose (Part No.J200038074RIN)
from
$37.17
AT Cooling Hose
Cohline – Vacuum Hose, 3.5mm x 9mm (Part No.B202012368COH)
from
$9.44
Vacuum Hose, 3.5mm x 9mm
CRP – HOSE – FUEL (Part No.4L30010807CRP)
from
$466.04
HOSE – FUEL
CRP – Hose – Fuel (Part No.4L30010819CRP)
from
$93.78
Hose – Fuel
CRP – HOSE – FUEL (Part No.4L30010814CRP)
from
$355.90
HOSE – FUEL
CRP – Hose – Fuel (Part No.4L30010817CRP)
from
$408.17
Hose – Fuel
Cohline – Fuel Hose, per Meter (Part No.E5000106278COH)
from
$10.70
Fuel Hose, per Meter
Gates – Premium Molded Coolant Hose (Part No.20801)
from
$23.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
Product Features:
See More
Product Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
Gates – Automotive XL« High Capacity V-Belt (Part No.9510)
from
$33.49
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.
Product Features:
See More
Product Features:
- Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
- Resists oil, heat, ozone, weather and aging for improved belt life
- Meets or exceeds SAE J636C specifications
Gates – Automotive XL« High Capacity V-Belt (Part No.9300)
from
$22.99
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.
Product Features:
See More
Product Features:
- Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
- Resists oil, heat, ozone, weather and aging for improved belt life
- Meets or exceeds SAE J636C specifications
Driveworks – Poly Rib Belt Serpentine Belt; 91.54 Long, 6 Rib Count (Part No.38517)
from
$4.99
Dayco engineered to conform to high mileage, worn or misaligned drives without a sacrifice in quiet, long-lasting performance. Constructed with Aramid reinforced EPDM compounds, it delivers more than OE required quality… it delivers the solution to troublesome drive problems. Dayco Poly-Rib Belts meet or exceed SAE J1459 and SAE J2432 specifications.
Product Features:
See More
Product Features:
- Aramid noise resistant fibers embedded in the rubber make this belt run quieter in worn or misaligned pulleys
- No-Noise Advanced Design EPDM rubber compound for quiet extended life
Driveworks – Automotive V-Belt, Driveworks (Part No.36513)
from
$5.49
The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.
Product Features:
See More
Product Features:
- This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
- Polyester cords provide extreme tension-holding capability for longer belt life
- The raw edge belt design delivers the maximum gripping power
- The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration
Gates – Notched V-Belt: 53.61" Long, 1 Strand, Exact Fit (Part No.9530)
from
$37.49
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.
Product Features:
See More
Product Features:
- Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
- Resists oil, heat, ozone, weather and aging for improved belt life
- Meets or exceeds SAE J636C specifications
Dayco – V-Belt, Top Cog (Part No.17385)
from
$12.99
Dayco® High Performance V-Belt is the workhorse of the heavy-duty industry. Polyester cord provides maximum power transfer and tension holding capability for the life of the belt. The laminated construction helps absorb greater shock loads associated with diesel engines. These Dayco® High Performance V-Belt advantages translate into less downtime, lower maintenance costs, and increased dependability. Dayco’s High Performance V-Belt meets or exceeds SAE J636 and J637 specifications.
Product Features:
See More
Product Features:
- The High Performance V-Belt design delivers more flexibility and increases airflow around the belt, so it runs cooler and lasts longer than most competitive belts
- Polyester cord provides maximum power transfer and tension holding capability for the life of the belt
- The laminated construction helps absorb greater shock loads associated with diesel engines
- Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds
Dayco – Bottom Cog V-Belt; 29.5 Inch Long, Exact Fit Premium Quality (Part No.17295)
from
$11.49
Dayco’s high performance HD V-belt is one of the most innovative, top performing belts for its application. By combining raw-edge construction with a specially formulated polyester cord treatment, it offers excellent resistance to repeated flexing and protection against heat, oil and grease as well as the strength, stability and reliability required for vehicles that still need a heavy-duty V-belt.
Product Features:
See More
Product Features:
- Designed for efficient power transmission to vehicle accessories in today’s trucks and buses
- Provides greater durability and flexibility – 35% stronger than all previous versions
- Features specially treated cords for added strength, stability and reliability
- Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds
Dayco – Bottom Cog V-Belt; 36.5 Inch Long, Exact Fit Premium Quality (Part No.15365)
from
$13.49
Dayco has combined raw-edge construction and a smooth top to ensure high performance on vehicles and drives that utilize V-belts. The Dayco high performance V-belt delivers more flexibility and increases airflow around the belt so it runs cooler and lasts longer. Three plies of neoprene impregnated fabric resist heat, oil and grease while a specially-formulated treatment of the polyester cord provides the strength, stability and reliability that are required for one of the most innovative, top-performing V-belts.
Product Features:
See More
Product Features:
- Provides greater durability and flexibility – 35% stronger than all previous versions
- Prevents electromechanical interference issues on modern vehicles
- Resists heat, oil and grease
Upgrade your 1966 Mercedes-Benz 250S with Top-Quality Belts and Hoses
When it comes to maintaining or upgrading your 1966 Mercedes-Benz 250S, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Mercedes-Benz or enhancing its overall performance, Belts and Hoses are key to keeping your 250S functioning at its best. At Advance Auto Parts, we offer a wide selection of 20 Belts and Hoses for the 1966 Mercedes-Benz 250S, designed to meet your needs without breaking the bank.
From
Serpentine and V Belt
replacements to
Hose Clamps
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 1966 Mercedes-Benz 250S at great prices.
Our Belts and Hoses inventory for this model
ranges from just $4.09 to $466.04, with
an average price of $111.21.
Our 20 Belts and Hoses in stock come from 6 trusted brands, so you’re sure to find the right part for your 1966 Mercedes-Benz 250S without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1966 Mercedes-Benz 250S, we stock popular OEM and aftermarket Belts and Hoses from top names
like Dayco, and more.
Dayco Belts and Hoses
start at just $11.49 and boast an impressive 5 stars average rating from customers.
With 5 customer reviews and counting, our 1966 Mercedes-Benz 250S Belts and Hoses have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1966 Mercedes-Benz 250S is always ready to roll. We’re committed to providing you with everything you need to keep your 250S in top shape, all in one place.
Start shopping confidently below for your 1966 Mercedes-Benz 250S!
Best-Selling Serpentine and V Belts for 1966 Mercedes-Benz 250Ss
Enhance the driving experience in your Mercedes-Benz with 6 quality Serpentine and V Belt components, starting at $5.49.
Dayco – Bottom Cog V-Belt; 36.5 Inch Long, Exact Fit Premium Quality (Part No.15365)
from
$13.49
Dayco has combined raw-edge construction and a smooth top to ensure high performance on vehicles and drives that utilize V-belts. The Dayco high performance V-belt delivers more flexibility and increases airflow around the belt so it runs cooler and lasts longer. Three plies of neoprene impregnated fabric resist heat, oil and grease while a specially-formulated treatment of the polyester cord provides the strength, stability and reliability that are required for one of the most innovative, top-performing V-belts.
Product Features:
See More
Product Features:
- Provides greater durability and flexibility – 35% stronger than all previous versions
- Prevents electromechanical interference issues on modern vehicles
- Resists heat, oil and grease
Driveworks – Automotive V-Belt, Driveworks (Part No.36513)
from
$5.49
The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.
Product Features:
See More
Product Features:
- This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
- Polyester cords provide extreme tension-holding capability for longer belt life
- The raw edge belt design delivers the maximum gripping power
- The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration
Dayco – Bottom Cog V-Belt; 29.5 Inch Long, Exact Fit Premium Quality (Part No.17295)
from
$11.49
Dayco’s high performance HD V-belt is one of the most innovative, top performing belts for its application. By combining raw-edge construction with a specially formulated polyester cord treatment, it offers excellent resistance to repeated flexing and protection against heat, oil and grease as well as the strength, stability and reliability required for vehicles that still need a heavy-duty V-belt.
Product Features:
See More
Product Features:
- Designed for efficient power transmission to vehicle accessories in today’s trucks and buses
- Provides greater durability and flexibility – 35% stronger than all previous versions
- Features specially treated cords for added strength, stability and reliability
- Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds
Gates – Notched V-Belt: 53.61" Long, 1 Strand, Exact Fit (Part No.9530)
from
$37.49
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.
Product Features:
See More
Product Features:
- Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
- Resists oil, heat, ozone, weather and aging for improved belt life
- Meets or exceeds SAE J636C specifications
Gates – Automotive XL« High Capacity V-Belt (Part No.9510)
from
$33.49
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.
Product Features:
See More
Product Features:
- Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
- Resists oil, heat, ozone, weather and aging for improved belt life
- Meets or exceeds SAE J636C specifications
Gates – Automotive XL« High Capacity V-Belt (Part No.9300)
from
$22.99
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.
Product Features:
See More
Product Features:
- Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
- Resists oil, heat, ozone, weather and aging for improved belt life
- Meets or exceeds SAE J636C specifications
Most Popular 1966 Mercedes-Benz 250S Hose Clamps
Customize your Mercedes-Benz with 1 Hose Clamps products
like Fuel Hose Clamps, all
priced under $4.09.
Rein – Fuel Hose Clamp (Part No.E502012070RIN)
from
$4.09
Fuel Hose Clamp
Top Picks for 1966 Mercedes-Benz 250S Vacuum Hoses
Upgrade Mercedes-Benz 250Ss with top-quality Vacuum Hoses parts, including 1 OEM and aftermarket selections for your 1966 model.
Cohline – Vacuum Hose, 3.5mm x 9mm (Part No.B202012368COH)
from
$9.44
Vacuum Hose, 3.5mm x 9mm
In-Demand Fuel Hoses for 1966 Mercedes-Benz 250Ss
Select from 9 premium Fuel Hoses parts for your 1966 Mercedes-Benz 250S, with prices ranging from $10.70 to $466.04.
CRP – Hose – Fuel (Part No.4L30010808CRP)
from
$75.84
Hose – Fuel
CRP – HOSE – FUEL (Part No.4L30010807CRP)
from
$466.04
HOSE – FUEL
CRP – Hose – Fuel (Part No.4L30010817CRP)
from
$408.17
Hose – Fuel
CRP – HOSE – FUEL (Part No.4L30010814CRP)
from
$355.90
HOSE – FUEL
CRP – Hose – Fuel (Part No.4L30010815CRP)
from
$349.42
Hose – Fuel
CRP – Hose – Fuel (Part No.4L30010810CRP)
from
$160.24
Hose – Fuel
CRP – Hose – Fuel (Part No.4L30010819CRP)
from
$93.78
Hose – Fuel
CRP – Fuel Hose (Part No.E5000859958CRP)
from
$43.25
Fuel Hose
Cohline – Fuel Hose, per Meter (Part No.E5000106278COH)
from
$10.70
Fuel Hose, per Meter
Most Sold 1966 Mercedes-Benz 250S Engine Cooling Hoses
Explore our best-selling Mercedes-Benz parts for the 1966 250S among 1 OEM and aftermarket options starting from $23.99.
Gates – Premium Molded Coolant Hose (Part No.20801)
from
$23.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
Product Features:
See More
Product Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
Top-Rated Belts and Hoses Brands For Your 1966 Mercedes-Benz 250S
Shop for the best-rated brands offering Belts and Hoses and other products for your 1966 Mercedes-Benz 250Ss. Below you’ll find some of our best rated Belts and Hoses from Dayco, and more. Belts and Hoses from these brands that fit a 1966 250S start at just $11.49 and are rated as high as 5 stars. OEM and aftermarket Belts and Hoses don’t get more top quality, durable, and affordable than from the brands below.
Popular Dayco 1966 Mercedes-Benz 250S Belts and Hoses
When it comes to maintaining or upgrading your 1966 Mercedes-Benz 250S, using quality Belts and Hoses is essential to ensure durability and a perfect fit. Dayco ticks all of those boxes. We offer a wide selection of Dayco Belts and Hoses, specifically designed for the 1966 Mercedes-Benz 250S. With over 2 Dayco brand Belts and Hoses in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $11.49, with an average price of just $12.49. Plus, with over 1 customer reviews and an average rating of 5 stars, you can trust that our Dayco Belts and Hoses will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$11.49
$11.49
This product is not rated
Bottom Cog V-Belt; 29.5 Inch Long, Exact Fit Premium Quality
“”
FAQs for 1966 Mercedes-Benz 250S Belts and Hoses
Which Belts and Hoses are best-sellers for 1966 Mercedes-Benz 250Ss?
Out of 20 Belts and Hoses that fit 1966 Mercedes-Benz 250Ss, the following parts are the top sellers:
- AT Cooling Hose (11192519) – $37.17
- Hose – Fuel (11973119) – $75.84
- Premium Molded Coolant Hose (10511408) – $23.99
What’s the price range for 1966 Mercedes-Benz 250S Belts and Hoses?
Belts and Hose prices for the 1966 Mercedes-Benz 250S start at $4.09 and go up to $466.04 for the most premium parts.
What’s the average price of a Belts and Hose for a 1966 Mercedes-Benz 250S?
The average price for Belts and Hoses for the 1966 Mercedes-Benz 250S is $111.21. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Belts and Hoses for other Mercedes-Benz 250S model years?
What are the cheapest Belts and Hoses for my 1966 Mercedes-Benz 250S?
The cheapest 1966 Mercedes-Benz 250S Belts and Hoses we carry in stock are:
- Fuel Hose Clamp (11974578) – $4.09
- Automotive V-Belt, Driveworks (5060184) – $5.49
- Vacuum Hose, 3.5mm x 9mm (10738350) – $9.44
- Fuel Hose, per Meter (10746369) – $10.70
- Bottom Cog V-Belt; 29.5 Inch Long, Exact Fit Premium Quality (19270471) – $11.49
What are the top-rated Belts and Hoses that fit the 1966 Mercedes-Benz 250S?
Out of 5 reviews by customers, our 1966 Mercedes-Benz 250S Belts and Hoses have an average customer rating of . These are some of the highest-rated Belts and Hose types for the 1966 Mercedes-Benz 250S and their top-rated products:
- Serpentine and V Belts
- Bottom Cog V-Belt; 36.5 Inch Long, Exact Fit Premium Quality (3300029) – $13.49
- Automotive V-Belt, Driveworks (5060184) – $5.49
What types of Belts and Hoses do you sell for my 1966 Mercedes-Benz 250S?
As of 2/5/25, these are some of the most in-demand types of Belts and Hoses for a 1966 Mercedes-Benz 250S:
Can I get help with 1966 Mercedes-Benz 250S Belts and Hose orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Mercedes-Benz Belts and Hoses and more.
What is your return policy for Mercedes-Benz 250S Belts and Hoses?
Advance Auto Parts keeps returns simple. For new Mercedes-Benz 250S Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
