1967 Jeep CJ6 Steering and Chassis Parts
More 1967 Jeep CJ6 Steering and Chassis Parts Categories
If you’re looking for an original Steering and Chassis Parts replacement for a 1967 Jeep CJ6, you can search through our selection below. You’ll also find aftermarket and OEM Steering and Chassis Parts to meet your needs.
Essential 1967 Jeep CJ6 Steering and Chassis Parts
Rugged Ridge – Nitrogen Series Steering Stabilizer (Part No.18475.01)
from
$123.99
ORV Steering Stabilizers feature D.O.M. tubing for longer life and reduced internal wear. The piston rod is polished and chromed for longer life and the highest performance. Improved design gives you the best of both on and offroad use. Tough leak proof s
Product Features:
See More
Product Features:
- White
- Protects Shock From Offroad Obstacles
- Smooth Ride
- Longer Rust-free Life
- Limited 5 Year Warranty
Rancho – Single Steering Damper Kit (Part No.RS97345)
from
$114.99
Designed to reduce wheel shimmy and end vibration caused by larger tires, the Rancho® steering stabilizer kit cuts down on steering arm fatigue to improve handling. The kit includes one Rancho RS5000® steering stabilizer and installation brackets.
Product Features:
See More
Product Features:
- COMPATIBILITY — Designed for Jeep CJ2A, CJ3A, CJ3B, CJ5, CJ6, CJ7, CJ8
- IMPROVED HANDLING AND PERFORMANCE — Reduces wheel shimmy, bump steer and vibration which helps minimize on- or off-road driver fatigue
- ACCOMMODATES LARGER TIRES — Engineered for vehicles with oversized wheels and tires.
- ENGINEERED TO LAST — Features protective boot to shield shock rod and oil seal and 0.25-in. high-strength, low-alloy steel bracket construction for long life
- EASY TO INSTALL — Includes one Rancho RS5000® steering stabilizer and brackets that bolt directly to factory steering linkage with included mounting hardware, no modifications needed
- RESISTS CORROSION — Durable black powder-coated and/or zinc-plated brackets resist rust and corrosion
- PRECISION DESIGN — Brackets are CNC cut and bent to exact specifications for a perfect fit
Cardone – Power Steering Filter (Part No.20-0058F)
from
$48.49
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.
Product Features:
See More
Product Features:
- In-line filter with serviceable filter element
- Patented built-in bypass that filters up to 190 micron particles
- Designed to extend the life of the steering system
- Sure-grip barb connections are included to ensure proper hose fitment
Omix – Tie Rod End (Part No.18043.03)
from
$31.49
Are your Jeep’s tie rod ends loose? Have your front tires begun to wear unevenly? Omix-ADA offers high-quality replacements that will give you years of service and get you back on the road. Standard industry practice is to replace both tie rod ends. If on
Product Features:
See More
Product Features:
- Steel
- With Hardware
- OE Style
- Direct Fit
- Limited 5 Year Warranty
National – Multi Purpose Seal (Part No.480821)
from
$8.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Imperial – Power Steering Oil Cooler (Part No.241009)
from
$28.49
Product Features:
See More
- Power steering oil cooler
- 3/4″ x 2-1/2″ x 9″
- For vehicles with 3/8″ I.D. power steering return hose
- Removes destructive heat and prolongs power steering system life
- Compatible with OEM cooler systems
- Ultrasonically soldered for reliability
- 100% pressure testing to 150 PSI for quality assurance
- High efficiency turbulators
National – Bearings (Part No.11590)
from
$26.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Multi Purpose Seal (Part No.2064)
from
$47.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Omix – Tube Steering Column 49-71 (Part No.18030.01)
from
$41.99
Own a Jeep? The toughest four letter word on wheels. Are you looking for a parts source rugged enough to match your off the beaten path sense of adventure? With more than 11,000 unique part numbers from brands like Omix-ADA, Rugged Ridge, Alloy USA, Outland Automotive, ORV Suspension and Precision Gear, consider this your trail guide to the 4×4 of your dreams. A go anywhere, anytime, in any weather vehicle. Go ahead and smile, because it’s going to take a lot of courage not to be cocky when you Own a Jeep like that? Omix-ADA is more than just a parts manufacturer, they’re a community of enthusiasts dedicated to producing the finest in off-road solutions. Our products have been propelling four-wheel drive vehicles down highways, back roads and over the world’s roughest terrain for about two decades. Omix’s team of engineers have developed, tested and trail ridden many of our 11,000+ products until they were perfected for you. Omix-Ada is proud to have one of the most capable Research and Development, Engineering, and Product Design teams in the automotive aftermarket. By utilizing the latest in 3D Computer Aided Design and Finite Element Analysis, and coupling these tools with our decades of market experience, we are able to develop products that give our customers the highest value parts possible.
Product Features:
See More
Product Features:
- 1945-1949 CJ2A, 1948-1953 CJ3A, 1950-1952 M38, 1953-1967 CJ3B, 1953-1971 M38A1, 1955-1966 CJ5, 1955-1966 CJ6, Outer Steering Column Tube
Crown Auto Jeep Replacmnt – OE Replacement (Part No.83510055)
from
$54.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Leading Manufacturer Of Quality Replacement Parts For Jeep
- Meets Standards For Quality
- Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
- Improve The Performance
- Easy Installation
Omix – Steering Column Bearing (Part No.18030.02)
from
$7.99
Is your Jeep’s steering loose? Are your tires wearing in an uneven pattern? Chances are that some of your steering components are worn. Fixing them is cheaper than replacing your tires and it’s a whole lot safer too. Omix-ADA offers high quality replaceme
Product Features:
See More
Product Features:
- Heavy Duty Construction
- OE Style
- Direct Fit
- Limited 5 Year Warranty
Omix – King Pin Cup (Part No.18026.06)
from
$27.49
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.
Product Features:
See More
Product Features:
- Front
- OE Style
- Direct Fit
- Limited 5 Year Warranty
Omix – King Pin Cap (Part No.18026.04)
from
$39.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.
Product Features:
See More
Product Features:
- Front
- OE Style
- Direct Fit
- Limited 5 Year Warranty
Omix – Tie Rod End Tube (Part No.18046.04)
from
$26.49
Is your Jeep’s steering loose? Are your tires wearing in an uneven pattern? Chances are that some of your steering components are worn. Fixing them is cheaper than replacing your tires and it’s a whole lot safer too. Omix-ADA offers high quality replaceme
Product Features:
See More
Product Features:
- Steel
- OE Style
- Direct Fit
- Limited 5 Year Warranty
Omix – Tie Rod Adjusting Sleeve Clamp (Part No.18047.01)
from
$6.49
Is your Jeep’s steering loose? Are your tires wearing in an uneven pattern? Chances are that some of your steering components are worn. Fixing them is cheaper than replacing your tires and it’s a whole lot safer too. Omix-ADA offers high quality replaceme
Product Features:
See More
Product Features:
- Clamp; Nut And Bolt
- OE Style
- Direct Fit
- Limited 5 Year Warranty
Omix – Steering Gear Box Sector Shaft (Part No.18027.01)
from
$265.99
Is your Jeep’s steering loose? Are your tires wearing in an uneven pattern? Chances are that some of your steering components are worn. Fixing them is cheaper than replacing your tires and it’s a whole lot safer too. Omix-ADA offers high quality replaceme
Product Features:
See More
Product Features:
- Direct OE Replacement
- Built To Original Specifications
- 5 Year Limited Warranty
Daystar – Top 19/32" Outside Dia/Bottom 1-3/8" Outside Dia, Black, Polyurethane, Set Of 2 (Part No.KU13001BK)
from
$18.29
Ties rods and ball joints are important components in the overall suspension equation, yet they are supplied with inferior rubber boots that deteriorate and tear over time. Replacing them with Daystar Dust Boots will increase the durability and longevity of these important suspension components. Unless otherwise stated, they are offered in universal applications so have the stud and overall joint diameters on hand.
Product Features:
See More
Product Features:
- Durable Polyurethane Material
- Keeps Out Dust
- Made In USA
- Easy To Install
Rugged Ridge – Tie Rod End Dust Boot (Part No.18369.02)
from
$14.49
This pair of OE tie rod boots are a direct fit replacement and are made from polyurethane which is hardier than rubber meaning they will last much longer than the originals. Also allows for better handling and control for your Jeep.
Product Features:
See More
Product Features:
- Polyurethane
- Direct Fit
- Better Handling and Control
- OE Style
- Limited 5 Year Warranty
Omix – Sector Shaft Oil Seal (Part No.18029.04)
from
$4.79
Is your Jeep’s steering loose? Are your tires wearing in an uneven pattern? Chances are that some of your steering components are worn. Fixing them is cheaper than replacing your tires and it’s a whole lot safer too. Omix-ADA offers high quality replaceme
Product Features:
See More
Product Features:
- High Quality Construction
- OE Style
- Direct Fit
- Limited 5 Year Warranty
Omix – Sector Shaft Oil Seal (Part No.18002.03)
from
$4.99
Is your Jeep’s steering loose? Are your tires wearing in an uneven pattern? Chances are that some of your steering components are worn. Fixing them is cheaper than replacing your tires and it’s a whole lot safer too. Omix-ADA offers high quality replaceme
Product Features:
See More
Product Features:
- Rubber
- OE Style
- Direct Fit
- Limited 5 Year Warranty
Omix – Knuckle (Part No.18026.01)
from
$102.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.
Product Features:
See More
Product Features:
- Cast Iron
- Red Powdercoated
- Left
- Direct Fit
- Limited 5 Year Warranty
Omix – Knuckle (Part No.18026.02)
from
$102.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.
Product Features:
See More
Product Features:
- Cast Iron
- Red Powdercoated
- Right
- Direct Fit
- Limited 5 Year Warranty
Driveworks – Steering Tie Rod End (Part No.DW-ES140R)
from
$17.29
Driveworks chassis parts help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts meet OE specifications, help ensure improved steering response and reduce tire wear.
Product Features:
See More
Product Features:
- Forged housing from specific materials provides strength and durability to prevent breakage
- Coated technology provides a smooth and durable surface to prevent corrosion and rust
- Premium Polychloroprene rubber boots are fitted with grease relief valves to prevent contamination
- A slotted nut and cotter pin for a more secure installation
Imperial – Transmission Oil Cooler Hose (Part No.248001)
from
$32.49
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Transmission oil cooler hose
- 11/32″ x 4-1/2′
- Designed for transmission fluid applications
- Made for tight-radius applications found in transmission cooler installations
- Compatible with 11/32 in. OEM cooler systems
- Tube made of black chemigum (nitrile)
- Reinforced with 2-spiral synthetic
- Covered in black Hypalon
- Compatible with 11/32 in. OEM cooler systems
- Tube made of black chemigum (nitrile)
- Reinforced with 2-spiral synthetic
- Covered in black Hypalon
Carquest Premium – Universal Hose – W/End Fittings (Part No.35478)
from
$166.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
Imperial – Quick Connect Coupler (Part No.240250)
from
$11.49
Imperial transmission line fitting kits allow for the installation of auxiliary cooler lines without cutting the vehicle’s original metal lines.
Product Features:
See More
Product Features:
- Quick Connect coupler
- Fits most 5/16″ transmission lines with 1/2″ – 20″ threads
- Simplifies transmission cooler installation
- Allows for auxiliary transmission cooler installation without cutting OE lines
Carquest Premium – Pressure Hose Assembly (Part No.36414)
from
$73.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
Popular 1967 Jeep CJ6 Steering and Chassis Parts Categories
1967 Jeep CJ6 Steering and Chassis Parts
You count on your 1967 Jeep CJ6 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Steering and Chassis Parts. With 40 Steering and Chassis Parts ranging in price from $4.79 to $265.99, you’re sure to find everything you need for your 1967 Jeep CJ6.
Brands matter. If you want to shop a specific Steering and Chassis Parts brand, we stock 12 different brands like Imperial, Cardone, and Rancho. 1967 Jeep CJ6 Steering and Chassis Parts start as low as $4.79!
One of the best ways to find top quality OEM or aftermarket Steering and Chassis Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 1,108 extensive product reviews on 1967 Jeep CJ6 Steering and Chassis Parts. Some of the top-rated Steering and Chassis Parts products we carry are Power Steering Filter with 5.0 stars and Power Steering Filter with 5.0 stars.
Did we mention you can order your Steering and Chassis Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Steering and Chassis Parts inventory for your 1967 Jeep CJ6 below to get started!
Top-Rated Steering and Chassis Parts Brands For Your 1967 Jeep CJ6
Trusted Steering and Chassis Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1967 Jeep CJ6 running right for years to come. In our inventory you’ll find brands like Imperial, Cardone, Rancho, and even more.
Popular Rancho Steering and Chassis Parts
You’ll find popular Rancho brand products across Steering Dampers. All are waiting to get your 1967 Jeep CJ6 back on the road. Some of the top-rated Rancho products in these categories are:
Top-Rated Imperial Steering and Chassis Parts
If Imperial are what you’re looking for, our inventory holds plenty. We stock Imperial brand Steering and Chassis Parts for your 1967 Jeep CJ6, and some of our most reviewed Imperial parts include:
FAQs for 1967 Jeep CJ6 Steering and Chassis Parts
What are the most purchased Steering and Chassis Parts for the 1967 Jeep CJ6?
Out of 40 Steering and Chassis Parts for the 1967 Jeep CJ6, the most popular in our inventory are:
What are the top-rated 1967 Jeep CJ6 Steering and Chassis Parts?
Top-rated Steering and Chassis Parts for your 1967 Jeep CJ6 based on customer reviews/ratings are:
from
$48.49
(2)
Power Steering Filter
“installed on return line to power steering pump no problems with leaks”
from
$77.99
(1)
Tie Rod End
“This is a pretty good product. It was easy to install and use. The grease fittings were a little hard to install, but take your time and they work out”
