1967 Dodge W200 Series Differentials

Essential 1967 Dodge W200 Series Differentials

Yukon Gear – Replacement Carrier Shim Kit For Dana 60, 61 & 70U (Part No.55020)

Replacement Carrier Shim Kit For Dana 60, 61 & 70U

from

$104.99
Product Features:
  • Carrier shims for Dana Spicer 60 and 70U
See More

Yukon Gear – Replacement Front Axle Inner Seal Redi-Sleeve For Dana 44 & 8.5" GM (Part No.30219)

Replacement Front Axle Inner Seal Redi-Sleeve For Dana 44 & 8.5" GM

from

$83.99
Replacement front axle inner seal redi-sleeve for Dana 44 & 8.5″ GM.Yukon Mighty seal.

Product Features:
  • Axle Redi-sleeve
  • Fits Dana Spicer 44
See More

USA Standard Gear – Replacement Spider Gear Set For Dana 60, 30 Spline (Part No.39008)

Replacement Spider Gear Set For Dana 60, 30 Spline

from

$198.99
Product Features:
  • Spider gear kit
  • Fits Dana Spicer 60, 30 spline open differential
  • Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
See More

National – Shaft Repair Sleeve (Part No.99155)

Shaft Repair Sleeve

from

$38.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

Yukon Gear – Chrysler 9.25" And Dana 44 / 60 Tracloc Clutch Guide Replacement (Part No.33249)

Chrysler 9.25" And Dana 44 / 60 Tracloc Clutch Guide Replacement

from

$8.99
Product Features:
  • Clutch guide for Chrysler 9.25″, Dana Spicer 44 and Dana Spicer 60
  • For Trac Loc positraction applications only
See More

Yukon Gear – Pinion Seal For Chrysler 8.75" 42 Housing (Part No.30171)

Pinion Seal For Chrysler 8.75" 42 Housing

from

$53.99
Pinion seal for Chrysler 8.75″ 42 housing.Yukon Mighty seal.

Product Features:
  • Pinion seal
  • Fits Chrysler 8.75″ with ’42’ case housing
See More

Felpro – Differential Cover Gasket (Part No.RDS 6014)

Differential Cover Gasket

from

$15.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Powertrax – Grip LS Traction System (Part No.LS309231)

Grip LS Traction System

from

$511.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!
See More

Powertrax – Grip PRO Traction System (Part No.GT436035)

Grip PRO Traction System

from

$596.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!
See More

Yukon Gear – Chrysler 8.75" (Coarse Spline) Pinion Nut Washer (Part No.33162)

Chrysler 8.75" (Coarse Spline) Pinion Nut Washer

from

$9.99
Chrysler 8.75″ (coarse spline) pinion nut washer.

Product Features:
  • Pinion nut washer
  • Fits Chrysler 8.75″ with 10 spline pinion
See More

Yukon Gear – Chrysler 8.75" "89" Housing Nodular Iron Drop Out Case (Part No.32052)

Chrysler 8.75" "89" Housing Nodular Iron Drop Out Case

from

$564.99
89 housing nodular Iron Drop Out case, up to 500 HP, Billet adjuster for 8.75″ Chrysler. This dropout does not come with fill plug (Part number CHY612017).

Product Features:
  • Fits Chrysler 8.75″
  • ’89’ case design
  • Nodular iron for added strength
See More

USA Standard Gear – Steel Spool For Dana 60 With 35 Spline Axles, 4.10 & Down (Part No.59016)

Steel Spool For Dana 60 With 35 Spline Axles, 4.10 & Down

from

$369.99
Product Features:
  • Fits Chrysler Dana Spicer 60 with 35 spline axles
  • 4.10 and down ratio only
  • Provides 100% traction to both wheels at all times
  • Not recommended for street driven vehicles
See More

Yukon Gear – Dana 60 & Dana 70 Power Lok Case Bolt (Part No.33236)

Dana 60 & Dana 70 Power Lok Case Bolt

from

$7.99
Dana 60 & Dana 70 Power Lok case bolt.

Product Features:
  • Power Lok case bolt for Dana Spicer 60 and 70
  • 7/16 x 14 thread
  • 3.5″ long
  • 9/16″ hex head
See More

Yukon Gear – Bearing Race Driver (Part No.56023)

Bearing Race Driver

from

$219.99
Bearing race driver. No return.

Product Features:
  • Bearing race driver
  • Fits M88010 race
  • All steel construction
See More

Yukon Gear – Dana 25 / 27 / 30 / 44 / 50 Inner Oil Slinger Replacement (Part No.33012)

Dana 25 / 27 / 30 / 44 / 50 Inner Oil Slinger Replacement

from

$6.99
Product Features:
  • Inner oil slinger for Dana Spicer 25, 27, 30, 44 and 50
See More

Yukon Gear – Dana 44 Carrier Installation Kit Replacement (Part No.57003)

Dana 44 Carrier Installation Kit Replacement

from

$128.99
Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for Dana 44 differential. This kit contains carrier bearings, races and shims.

Product Features:
  • Fits Dana Spicer 44
  • Includes carrier bearings and races and carrier shim kit
See More

Yukon Gear – 7/16" To 3/8" Ring Gear Bolt Spacer Sleeve. (Part No.33056)

7/16" To 3/8" Ring Gear Bolt Spacer Sleeve.

from

$7.99
7/16″ TO 3/8″ ring gear bolt spacer sleeve.

Product Features:
  • Ring gear bolt sleeve
  • Adapts 7/16″ to 3/8″
See More

USA Standard Gear – Master Overhaul Kit for the Dana 44 Differential with 30 Spline (Part No.37008)

Master Overhaul Kit for the Dana 44 Differential with 30 Spline

from

$289.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

Product Features:
  • Fits standard rotation Dana Spicer 44 front
  • Uses Koyo bearings and races
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, axle seals, complete shim kit, ring gear bolts, pinion nut, oil baffles and slingers, thread locker, marking compound with brush and gasket.
See More

Yukon Gear – Replacement Standard Open Carrier Case For Dana 44, 3.92 & Up (Part No.20028)

Replacement Standard Open Carrier Case For Dana 44, 3.92 & Up

from

$149.99
Yukon replacement standard open carrier case for Dana 44, 3.92 & up, 2-3/8″ tall.

Product Features:
  • Standard open carrier case
  • Fits Dana Spicer 44 with 30 spline axles
  • 3.92 and up ratio only
  • Does not include spider gears
See More

Yukon Gear – Pinion Install Kit For Dana 60 Rear Differential (Part No.13032)

Pinion Install Kit For Dana 60 Rear Differential

from

$295.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits Dana Spicer 60 rear
  • Included are pinion bearings and races, pinion seal, crush sleeve , complete pinion shim kit, and marking compound with brush.
See More

USA Standard Gear – Replacement Ring & Pinion Gear Set For Dana 44 In A 5.38 Ratio (Part No.36053)

Replacement Ring & Pinion Gear Set For Dana 44 In A 5.38 Ratio

from

$279.99
USA Standard ring & pinion sets are the right choice to add confidence to your install. USA Standard Gear offers a full line of ring & pinion sets for a variety of common & hard to find applications. USA standard gear offers a standard one year warranty against defects on their ring & pinion sets.

Product Features:
  • Fits standard rotation Dana Spicer 44
  • 8.50″ ring gear diameter
  • 26 spline pinion
  • 10 ring gear bolts
  • 5.38 ratio
See More

Felpro – Axle Housing Cover Gasket (Part No.RDS 6629)

Axle Housing Cover Gasket

from

$6.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

National – Bearings (Part No.HM803110)

Bearings

from

$22.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – Replacement Pinion Depth Shims For Dana 60, 61 & D70-U (Part No.55012)

Replacement Pinion Depth Shims For Dana 60, 61 & D70-U

from

$17.99
Product Features:
  • Pinion depth shims for Dana Spicer 60 and 70U
See More

Yukon Gear – Aluminum Girdle Replacement Cover For Dana 44 Ta HD (Part No.32110)

Aluminum Girdle Replacement Cover For Dana 44 Ta HD

from

$359.99
Aluminum Girdle replacement cover for Dana 44 TA HD.

Product Features:
  • Fits standard rotation Dana Spicer 44
  • Aluminum girdle cover
See More

Yukon Gear – Dana 70 & Dana 80 Standard Open Cross Pin Shaft (Part No.33324)

Dana 70 & Dana 80 Standard Open Cross Pin Shaft

from

$69.99
Dana 70 & Dana 80 standard Open cross pin shaft, one piece case.

Product Features:
  • Cross pin shaft
  • Fits Dana Spicer 70 and 80
See More

Yukon Gear – Replacement Oil Baffle For Dana 44 (Part No.33000)

Replacement Oil Baffle For Dana 44

from

$6.99
Product Features:
  • Oil baffle for Dana Spicer 44
See More

Motive Gear – Differential Gear Install Kit (Part No.D44IK)

Differential Gear Install Kit

from

$61.99


Product Features:
  • MINI INSTALL KIT DANA 44
See More

Popular 1967 Dodge W200 Series Differentials Categories

1967 Dodge W200 Series Differentials

Maybe you’re in the middle of a full rebuild of that 1967 Dodge W200 Series. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 381 different Differentials in our inventory ranging from $3.99 to $1,566.99. That means you can find the exact parts or products you need to keep that 1967 Dodge W200 Series running smoothly.

Differentials are only as good as their brand. We stock 12 different brands to make sure you have plenty of trusted parts to choose from for your 1967 Dodge W200 Series. Yukon Gear, National, and FELPRO are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 1967 Dodge W200 Series, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 117 reviews in this category, some of the top rated parts include Bearings with 5.0 stars and Bearings with 1.0 stars.

So if you’re in the market for aftermarket Differentials to keep your 1967 Dodge W200 Series rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 1967 Dodge W200 Series Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1967 Dodge W200 Series demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your W200 Series the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular Driveworks Differentials

We carry Driveworks parts in our stock across Differential Bearings and Differential Pinion Seals categories, plus more. For a 1967 Dodge W200 Series, our most popular Driveworks Differentials include:
Tapered Roller Bearing
from $8.49
(7)
Tapered Roller Bearing
Differential Bearings
Oil Seal
from $10.49
(3)
Oil Seal
Differential Pinion Seals

Top 1967 Dodge W200 Series Differentials from Felpro

Felpro products are another trusted brand when it comes to Differentials for your 1967 Dodge W200 Series. Popular Felpro parts include:
Axle Housing Cover Gasket
from $6.49
(10)
Axle Housing Cover Gasket
Rear Housing Cover Gaskets
DIFFERENTIAL GASKET
from $8.29
(4)
DIFFERENTIAL GASKET
Rear Housing Cover Gaskets
Differential Cover Gasket
from $15.99
(1)
Differential Cover Gasket
Front Differential Cover Gaskets

FAQs for 1967 Dodge W200 Series Differentials

What are the most purchased Differentials for the 1967 Dodge W200 Series?

Out of 381 Differentials for the 1967 Dodge W200 Series, the most popular in our inventory are:
3 Qt - 80W90 Conventional Gear Oil With Posi Additive
from $57.99
This product is not rated
3 Qt – 80W90 Conventional Gear Oil With Posi Additive
Differential Oil
Multi Purpose Seal
from $23.29
(4)
Multi Purpose Seal
Differential Pinion Seals
Bearings
from $22.99
(3)
Bearings
Differential Bearings

What are the top-rated 1967 Dodge W200 Series Differentials?

Top-rated Differentials for your 1967 Dodge W200 Series based on customer reviews/ratings are:
Bearings
from $38.49
(2)
Bearings
“nice finish and function. Should perform well.”
Bearings
from $20.99
(2)
Bearings
“this is not a front wheel bearing”
Differential Carrier Gasket
from $6.49
(1)
Differential Carrier Gasket
“It just what i needed for my 74 cuda rear end house which is 8 3/4”