1967 Chrysler Imperial Differentials

Essential 1967 Chrysler Imperial Differentials

National – Bearings (Part No.M86610)

Bearings

from

$9.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Felpro – Differential Cover Gasket (Part No.RDS 12775)

Differential Cover Gasket

from

$8.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

FAG US – CONE (Part No.KLM603049)

CONE

from

$23.79
CONE

Yukon Gear – Pinion Install Kit For Chrysler 8.75" (#41) Differential (Part No.13005)

Pinion Install Kit For Chrysler 8.75" (#41) Differential

from

$292.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits Chrysler 8.75″ ’41’ case
  • Included are pinion bearings and races, pinion seal, pinion nut, complete pinion shim kit, and marking compound with brush.
See More

Yukon Gear – Pinion Depth Shims For GM 8.25" IFS, 8.5", 12 Bolt Car, Ford 8.8" & Chrysler 8.25" (Part No.55009)

Pinion Depth Shims For GM 8.25" IFS, 8.5", 12 Bolt Car, Ford 8.8" & Chrysler 8.25"

from

$27.99
8.25″ IFS, 8.5″, 12P, 7.5″ F, 8.8″ F, 8.25″ Chrysler pinion shim kit.

Product Features:
  • Pinion depth shims for GM 8.25″ IFS, 8.5″, 8.6″, 12 bolt passenger car, Ford 7.5″ and 8.8″, Chrysler 8.25″
See More

Yukon Gear – Dana 60 Pinion Gear Thrust Washer, Standard Open & Tracloc (Also 8.75" Chrysler Std) Dana 70 2Pc (Part No.33287)

Dana 60 Pinion Gear Thrust Washer, Standard Open & Tracloc (Also 8.75" Chrysler Std) Dana 70 2Pc

from

$5.99
Dana 60 pinion gear Thrust washer, standard Open & TracLoc (also 8.75″ Chrysler STD) Dana 70 2PC.

Product Features:
  • Pinion gear thrust washer for Dana Spicer 60
  • Fits standard open and Trac Loc applications
See More

Yukon Gear – Redline Synthetic "Shock Proof" Oil – 4 Quarts (Part No.15004)

Redline Synthetic "Shock Proof" Oil - 4 Quarts

from

$137.99
Redline Synthetic “Shock Proof” Oil. 4 Quarts.

Product Features:
  • Includes four quarts of Redline Shockproof oil
See More

Felpro – Differential Carrier Gasket (Part No.RDS 6583)

Differential Carrier Gasket

from

$6.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Yukon Gear – Yoke For Chrysler 8.75" With 10 Spline Pinion And A 7290 U/Joint Size (Part No.41008)

Yoke For Chrysler 8.75" With 10 Spline Pinion And A 7290 U/Joint Size

from

$246.99
Yukon yoke for Chrysler 8.75″ with 10 spline pinion and a 7290 U/joint size. 2.625″ snap ring span. 1.125″ cap diameter. Inside snap ring. This yoke uses straps. OEM design. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Chrysler 8.75″
  • 10 spline
  • 7290 u-joint size
  • Inside snap ring design
  • 2.625″ snap ring span
  • 1.125″ cap diameter
  • Strap style
See More

USA Standard Gear – 8.75" Chrysler 89 Drop Out Case, Up To 500 Hp, Nodular Iron (Part No.59001)

8.75" Chrysler 89 Drop Out Case, Up To 500 Hp, Nodular Iron

from

$474.99
Product Features:
  • Dropout housing
  • Fits Chrylser 8.75″
  • ’89’ case design
  • Nodular iron for added strength
See More

Powertrax – Lock Right Locker (Part No.1240-LR)

Lock Right Locker

from

$456.99
The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    Yukon Gear – 8.75" Chrysler Gasket (Part No.23001)

    8.75" Chrysler Gasket

    from

    $12.99
    8.75″ Chrysler gasket.

    Product Features:
    • Dropout gasket
    • Fits Chrysler 8.75″
    See More

    USA Standard Gear – Spartan Locker For Chrysler 8.25" With 27 Spline Axles, Includes Heavy-Duty Cross Pin Shaft (Part No.17037)

    Spartan Locker For Chrysler 8.25" With 27 Spline Axles, Includes Heavy-Duty Cross Pin Shaft

    from

    $829.99
    The Spartan Locker, by USA Standard Gear, provides reliable traction at a low cost. Give your vehicle great traction and save some cash. Choose a Spartan Locker for better traction. The Spartan locker by USA standard gear is a mechanical locker that replaces the spiders in a standard case. The Spartan locker’s design does not use the thrust washers and has a revolutionary spring and pin design that makes installation a snap! The couplers and drivers are made from 9310 steel, for added strength. Each Spartan locker carries a one year warranty against defect.

    Product Features:
    • Fits Chrysler 8.25″ with 27 spline axles
    • Made from 9310 steel for added strength
    • Replaces the spiders in a standard carrier case
    See More

    Yukon Gear – Bearing Race Driver (Part No.56022)

    Bearing Race Driver

    from

    $188.99
    Bearing race driver. No return.

    Product Features:
    • Bearing race driver
    • Fits M86610 race
    • All steel construction
    See More

    Yukon Gear – Pinion Seal For 8.75" Chrysler Or For 9.25" Chrysler With 41 Or 89 Housing (Part No.30121)

    Pinion Seal For 8.75" Chrysler Or For 9.25" Chrysler With 41 Or 89 Housing

    from

    $13.99
    Pinion seal for 8.75″ Chrysler or for 9.25″ Chrysler with 41 or 89 housing.Yukon Mighty seal.

    Product Features:
    • Pinion seal
    • Fits Chrysler 8.75″ with ’41’ and ’89’ case housings and 2000 and down Chrysler 9.25″
    See More

    Richmond Gear – RngPnnInstlKt (Part No.83-1037-1)

    RngPnnInstlKt

    from

    $222.99
    RngPnnInstlKt

    Yukon Gear – Ring Gear Bolt For Chrysler 7.25", 8" IFS, 8.25", 8.75" & GM 7.2" IFS Front (Part No.33035)

    Ring Gear Bolt For Chrysler 7.25", 8" IFS, 8.25", 8.75" & GM 7.2" IFS Front

    from

    $8.99
    Ring gear bolt for Chrysler 7.25″, 8″ IFS, 8.25″, 8.75″ & GM 7.2″ IFS front. 3/8″ x 24.

    Product Features:
    • Ring gear bolt for Chrysler 7.25″, 8.0″ IFS and 8.75″
    • 3/8″ x 24 thread
    • .866″ long
    See More

    USA Standard Gear – Chrysler 8.25" Spartan Locker Cross Pin Shaft (Part No.17035)

    Chrysler 8.25" Spartan Locker Cross Pin Shaft

    from

    $49.99
    Product Features:
    • USA Standard Gear heavy-duty cross pin shaft
    • Fits Chrylser 8.25″ with 27 and 29 spline axles
    • Works with Spartan Locker or standard open spider gears
    See More

    Yukon Gear – Redi-Sleeve Yoke Saver For 8.75" C, 9.25" C, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD (Part No.30228)

    Redi-Sleeve Yoke Saver For 8.75" C, 9.25" C, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD

    from

    $37.99
    Replacement redi-sleeve yoke saver for 8.75″ c, 9.25″ c, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD .Yukon Mighty seal.

    Product Features:
    • Redi-Sleeve yoke saver
    • Fits Chrysler 8.75″ and 9.25″ rear, Dana Spicer 60, 70, 70U and 70HD
    See More

    National – Bearings (Part No.HM803110)

    Bearings

    from

    $22.99
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Crowned raceways and rollers to ensure even load distribution for maximum life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    Yukon Gear – Bolt/Screw For Adjuster Lock For Chrysler 7.25", 8.25", 8.75", 9.25" (Part No.33233)

    Bolt/Screw For Adjuster Lock For Chrysler 7.25", 8.25", 8.75", 9.25"

    from

    $15.99
    Bolt/screw for adjuster lock for Chrysler 7.25″, 8.25″, 8.75″, 9.25″.

    Product Features:
    • Side adjuster lock bolt
    • Fits Chrysler 7.25″, 8.25″, 8.75″ and 9.25″
    See More

    Yukon Gear – Chrysler 8.75" (Coarse Spline) Pinion Nut Washer (Part No.33162)

    Chrysler 8.75" (Coarse Spline) Pinion Nut Washer

    from

    $9.99
    Chrysler 8.75″ (coarse spline) pinion nut washer.

    Product Features:
    • Pinion nut washer
    • Fits Chrysler 8.75″ with 10 spline pinion
    See More

    Yukon Gear – Crush Sleeve (Part No.33094)

    Crush Sleeve

    from

    $15.99
    Crush Sleeve for Chrysler 8″ & 9.25″ rear. Approx 0.630″ long.

    Product Features:
    • Crush sleeve for Chrysler 8.0″ IFS and 9.25″ rear, also Ford 9″ with aftermarket Daytona pinion support
    • 0.630″ tall
    See More

    USA Standard Gear – Master Overhaul Kit for Chrysler 8.75" #89 Housing with 25520/90 Differential bearings (Part No.37094)

    Master Overhaul Kit for Chrysler 8.75" #89 Housing with 25520/90 Differential bearings

    from

    $309.99
    USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

    Product Features:
    • Fits Chrysler 8.75″ ’89’ case housing with 25520 carrier races
    • Uses Koyo bearings and races
    • Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush and gasket.
    See More

    Motive Gear – Differential Ring and Pinion (Part No.C9.25-456)

    Differential Ring and Pinion

    from

    $254.99


    Product Features:
    • CHRY 12BLT 9.25 R&P-4.56 RATIO
    See More

    Yukon Gear – Pinion Nut (Part No.33142)

    Pinion Nut

    from

    $10.99
    Pinion nut for Chrysler 7.25″, 8.0″ IFS, 8.25″, 8.75″ fine spline, 9.25″ front & rear, 7/16″ x 14.

    Product Features:
    • Pinion nut for Chrysler 8.0″ IFS, 8.25″, 8.75″ with 29 spline pinion and 9.25″ rear
    • 7/8″ x 14 thread
    See More

    Yukon Gear – Powr Lok Button Kit For Dana 30, Dana 44 & Chrysler 8.75" (Part No.33536)

    Powr Lok Button Kit For Dana 30, Dana 44 & Chrysler 8.75"

    from

    $67.99
    Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses t

    Product Features:
    • Powr Lok button kit
    • Fits Dana Spicer 30, 44 and Chrysler 8.75″
    See More

    Yukon Gear – 8.75" Chrysler & 55P Chevy Power Lok Clutches, Model 20 Also, Posi (Part No.16148)

    8.75" Chrysler & 55P Chevy Power Lok Clutches, Model 20 Also, Posi

    from

    $275.99
    8.75″ Chrysler & 55P Chevy Power Lok clutches, Model 20 also, POSI.

    Product Features:
    • Clutch kit
    • Fits Chrysler 8.75″, 1955-1964 GM passenger car and AMC Model 20 Powr Lok positraction
    See More

    1967 Chrysler Imperial Differentials

    Maybe you’re in the middle of a full rebuild of that 1967 Chrysler Imperial. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 120 different Differentials in our inventory ranging from $4.99 to $1,566.99. That means you can find the exact parts or products you need to keep that 1967 Chrysler Imperial running smoothly.

    Differentials are only as good as their brand. We stock 10 different brands to make sure you have plenty of trusted parts to choose from for your 1967 Chrysler Imperial. Driveworks, National, and Yukon Gear are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

    We know you’ll find the perfect Differentials for your 1967 Chrysler Imperial, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 47 reviews in this category, some of the top rated parts include Bearings with 5.0 stars and Multi Purpose Seal with 4.0 stars.

    So if you’re in the market for aftermarket Differentials to keep your 1967 Chrysler Imperial rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

    Differentials Brands To Make Your 1967 Chrysler Imperial Last

    Simple repair, complete replacement, or a full rebuild. No matter the job, your 1967 Chrysler Imperial demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your Imperial the best it can be. Be sure to browse some of our top Differentials brands and parts.

    Popular Felpro Differentials

    We carry Felpro parts in our stock across Automatic Transmission Differential Carrier Gaskets and Rear Housing Cover Gaskets categories, plus more. For a 1967 Chrysler Imperial, our most popular Felpro Differentials include:
    Differential Carrier Gasket
    from $6.49
    (1)
    Differential Carrier Gasket
    Automatic Transmission Differential Carrier Gaskets
    DIFFERENTIAL GASKET
    from $6.79
    (21)
    DIFFERENTIAL GASKET
    Rear Housing Cover Gaskets

    FAQs for 1967 Chrysler Imperial Differentials

    What are the most purchased Differentials for the 1967 Chrysler Imperial?

    Out of 120 Differentials for the 1967 Chrysler Imperial, the most popular in our inventory are:
    Tapered Cone/Cup Wheel Bearing Set
    from $13.99
    (14)
    Tapered Cone/Cup Wheel Bearing Set
    Front Differential Pinion Bearings
    3 Qt - 80W90 Conventional Gear Oil With Posi Additive
    from $57.99
    This product is not rated
    3 Qt – 80W90 Conventional Gear Oil With Posi Additive
    Differential Oil
    Bearings
    from $23.99
    (7)
    Bearings
    Front Differential Pinion Bearings

    What are the top-rated 1967 Chrysler Imperial Differentials?

    Top-rated Differentials for your 1967 Chrysler Imperial based on customer reviews/ratings are:
    Bearings
    from $38.49
    (2)
    Bearings
    “nice finish and function. Should perform well.”
    Multi Purpose Seal
    from $17.29
    (1)
    Multi Purpose Seal
    “Love advance they carry better parts than competitors online ordering with all the different promo codes and you can pick up in store”
    Pinion Nut
    from $8.49
    (1)
    Pinion Nut
    “Said it fits 62 Corvette on website, this nut is 7/8-14 thread and the one that fits is 7/8-16 thread. Wrong info on site set me back a week getting t”