1967 Chevrolet Chevelle Exhaust Parts
More 1967 Chevrolet Chevelle Exhaust Parts Categories
If you’re looking for an original Exhaust Parts replacement for a 1967 Chevrolet Chevelle, you can search through our selection below. You’ll also find aftermarket and OEM Exhaust Parts to meet your needs.
Essential 1967 Chevrolet Chevelle Exhaust Parts
Thrush – Classic Muscle Car Exhaust System with Turbo Mufflers (Part No.89023)
from
$379.99
Upgrade your vintage muscle car’s exhaust system with a Thrush? Turbo Header Back System. Featuring Thrush Turbo mufflers with reversible flow chambers, spun-locked heads and aluminized construction, it has everything needed for installation.
Product Features:
See More
Product Features:
- ENGINEERED TO LAST — Features 2.5-in. aluminized smooth bend pipes
- CLASSIC SOUND — Features Thrush? Turbo mufflers with tri-flow design with reversible flow chambers for that classic Thrush sound
- STRONG AND DURABLE — Muffler has a 100% aluminized-coated shell and spun lock heads for long life
- EASY TO INSTALL — Bolt-on installation for an easy upgrade; no fabrication or welding required
MagnaFlow – Street Series Crossmember-Back Performance Exhaust System (Part No.15894)
from
$1000.00
The MagnaFlow Street Series Crossmember-Back Performance Exhaust System 15894 brings enhanced engine sound and dyno-proven performance to your muscle car with a healthy helping of our deep, resonant signature exhaust note at Moderate exterior and Mild interior sound levels. Thanks to its durable, corrosion resistant stainless steel design, this exhaust system will handle whatever tarmac you decide to leave your mark on. This performance exhaust kit features a crossmember-back layout designed to replace your exhaust system from the crossmember on back. With its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Multiple Exit Options exit with 2.75in. Polished Weld-On Single Wall Turndown Cut Edge tips, your muscle car will be sounding as awesome as it looks. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15894 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s limited lifetime construction warranty.
Product Features:
See More
Product Features:
- Dyno-proven performance
- Durable corrosion-resistant stainless steel construction
- CNC precision robotic manufacturing techniques
ARP Auto Racing – For Use With Chevy Big Block, 3/8"-16, 1"L, 12Point Head, Natural, Ss, Set Of 16 (Part No.400-1212)
from
$56.99
ARP manufactures a variety of premium grade bolt and stud kits to facilitate installation of exhaust headers including the popular stainless stud kit with 12 point nuts. The Stainless 300 material is not affected by corrosion or extreme heat, making it ideal for the application.
Product Features:
See More
Product Features:
- Material Is Not Affected By Corrosion Or Extreme Heat
- The Compact 12-Point Nut Lets You Easily Slip A Socket Close To The Pipe
- Substantially Stronger Than Grade 8 Hardware
- Nominally Rated At 170,000 PSI Tensile Strength
- 3/8″-16 Thread Size
- 1″ Underhead Length
ARP Auto Racing – 0.750" L, Hex Style Head Type, Black Oxide, Black, Chrome Moly, Set Of 12 (Part No.100-1101)
from
$25.99
ARP manufactures a variety of premium grade bolt and stud kits to facilitate installation of exhaust headers including the popular stainless stud kit with 12 point nuts. The Stainless 300 material is not affected by corrosion or extreme heat, making it ideal for the application.
Product Features:
See More
Product Features:
- Material Is Not Affected By Corrosion Or Extreme Heat
- The Compact 12-Point Nut Lets You Easily Slip A Socket Close To The Pipe
- Substantially Stronger Than Grade 8 Hardware
- Nominally Rated At 170,000 Psi Tensile Strength
- Set of 12
- 0.75″ Overall Length
Walker – Clamp U-Bolt Bolt Dia 0.375 Length Nut Type Hex Pipe Dia 1.875 (Part No.35344)
from
$2.79
Complete your exhaust repair with an Exhaust Mate® U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from quality material for durability and long life
- BETTER TOGETHER — Use Walker® accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Clamp U-Bolt Bolt Dia 0.375 Length Nut Type Hex Pipe Dia 2.25 (Part No.35336)
from
$2.49
Complete your exhaust repair with an Exhaust Mate® U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from quality material for durability and long life
- BETTER TOGETHER — Use Walker® accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Flowmaster Inc. – Exhaust Tip – 4.25 x 2.25 in. Oval Polished SS Fits 2.50 in. Tubing – Clamp on (Part No.15385)
from
$64.19
These fully polished stainless steel tips feature single or double-wall construction, a rolled or cut edge style and come finished with embossed Flowmaster logo. Clamp-on installation. Available in various sizes. Sold individually.
Product Features:
See More
Product Features:
- Polished Stainless Steel Finish
- Clamp On Design
- Embossed Flowmaster Logo
- Universal Application
- 0
Flowtech – Terminator; Exhaust Tips (Part No.59905FLT)
from
$85.99Product Features:
- Show Quality Chrome Platinum
- Durable Black Finish
- Can Be Welded Or Clamped
- Complete The System
- Glass-Packed Resonators
Felpro – Exhaust Pipe Flange Gasket (Part No.60985)
from
$5.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Felpro – Exhaust Pipe Flange Gasket (Part No.9587)
from
$2.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Walker – Hanger Length 6 (Part No.35209)
from
$13.49
Complete your exhaust repair with Walker® exhaust hangers. Designed with OE-style features to support undercar exhaust components, Walker hangers are manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
- OE DESIGN — Designed with OE-style features for easy installation
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS — Made from quality steel for durability and long life
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Dorman – Double Ended Stud – 3/16-16 x 1-5/8in and 3/8-16 x 3-1/4in (Part No.29201)
from
$9.99
This exhaust flange stud and nut are designed to match the fit and function of the original hardware on specified vehicles. Made of quality materials, this hardware is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust flange stud and nut are designed to match the fit and function of the original hardware on specified vehicles
- Ideal solution – this stud and nut are reliable replacements for original parts that are missing or have failed due to wear
- Durable construction – these parts are made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Walker – SoundFX Muffler, Universal/ Fabrication Needed (Part No.18101)
from
$85.99
Featuring 100% aluminized steel for longer service life compared to low-carbon steel, Walker SoundFX® universal mufflers deliver quality appearance and favorable acoustics while mechanical interior joints and spun-locked heads provide durability.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Aluminized steel construction and internal drainage system helps reduce corrosion
- BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
- FACTORY SOUND — Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes
- GET MORE MILES FROM YOUR MUFFLER — Designed and tested to extend muffler life
Flowmaster Inc. – 40 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.942543)
from
$133.99
This two chamber design incorporates Flowmaster’s patented Delta Flow technology. The Delta deflectors generate increased scavenging for better performance and reduced interior sound. Milder exterior tone and reduced interior resonance over Original 40 series. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Mr. Gasket – Ultra Seal: Exhaust Gasket Set (Part No.5914)
from
$38.49
Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.
Product Features:
See More
Product Features:
- Manufactured from high-temperature steel core/graphite faced exhaust material
- Expanded steel core provides stability and maximum torque retention to eliminate gasket failure
- Graphite impregnated facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head
- Conforms to and seals minor surface irregularities
- Can be trimmed if necessary for modified port applications
- For OE replacement, high performance street, drag race and oval track use
- Anti-Stick Properties
- Easy Removal For Disassembly
Taylor Gaskets – Header Gasket (Part No.66122)
from
$48.99
Header Gasket
Flowmaster Inc. – Prebent Tailpipes 409S – 2.50 in. Rear Exit – Pair (Part No.815802)
from
$287.99
Flowmaster’s pre-bent tailpipes are made with 16 gauge 409S stainless steel mandrel-bent tubing and are designed to fit your vehicle perfectly with all the quality and performance that you would expect from a Flowmaster product.
See More
Flowmaster Inc. – Prebent Tailpipes – 3.00 in. Rear Exit – Pair (Part No.15819)
from
$227.99
Prebent pipe kits. Flowmaster’s 16 gauge mandrel bent pipe kits are designed to fit perfectly onto your vehicle with all the quality and performance that you would expect from Flowmaster.
See More
Flowtech – HEADER FLT BLOCK HUGGER (Part No.10010FLT)
from
$75.99
HEADER FLT BLOCK HUGGER
Flowmaster Inc. – Pipe Kit (Part No.81071)
from
$221.99
Pipe Kit
Hooker Headers – Super Comp. Header (Part No.2217-1HKR)
from
$1231.00
Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.
Product Features:
See More
Product Features:
- Long Tube Lengths
- Long Transition Collectors
- Monstrous Low-Mid Range Torque
- Keep Top End Horsepower
- Provides Finest Fit
- Most Durable Design Available
Flowtech – Ceramic Header (Part No.31100FLT)
from
$474.99Product Features:
- Fuel Economy From The Engine
- Leak Test For Max Performance
- Ceramic Headers
- Rust And Corrosion Resistance
- Mandrel-Formed Power Plenum
- Leakproof O-Ringed Port Seals
- Include All Mounting Hardware
Flowtech – Standard Header with Enhanced Fuel Efficiency and Leakproof Technology (Part No.11108FLT)
from
$223.99Product Features:
- Fuel Economy From The Engine
- Leak Test For Max Performance
- Mandrel-Formed Power Plenum
- Leakproof O-Ringed Port Seals
- Include All Mounting Hardware
Patriot Exhaust – H8013-1 1 7/8" Clippster Header Chevrolet Camaro Big Block Chevrolet 67-81 Coated (Part No.H8013-1)
from
$629.99
Clippster style headers are perfect for grafting modern uni-body front clipsuspensions to street rods, muscle cars and trucks. Clippster headers uselonger primaries than Tight Tucks, yet shorter than full length headers.Collectors exit toward the rear
Product Features:
See More
Product Features:
- Patriot Exhaust H8013-1 1 7/8″ Clippster Header Chevrolet Camaro Big Block Chevrolet 67-81 Coated
- Mid length or “clippster” headers provide improved ground clearance for popular muscle cars and street rods.
ARP Auto Racing – ARP Header Bolt Kit (Part No.100-1402)
from
$69.99
ARP manufactures a variety of premium grade bolt and stud kits to facilitate installation of exhaust headers including the popular stainless steel kit with 12-point nuts. The stainless material is not affected by corrosion or extreme heat, making it ideal for the application. What’s more, the compact 12-point nut lets you easily slip a socket close to the pipe. Each ARP accessory stud or bolt kit includes the specific number of parts for your appliaction, plus premium-quality washers and hex or 12-point nuts, as required. Studs are manufactured with a unique nut-starter nose that helps prevent cross-threading. Studs and bolts come either Black Oxide chrome moly or Stainless. Both are nominally rated at 180,000 psi tensile strength; substantially stronger than Grade 8 hardware. Specially drilled NASCAR models are available for those who wish to safety wire their bolts to prevent loosening.
Product Features:
See More
Product Features:
- 3/8″-16 Thread Size(s)
- Steel
- Black Oxide
- Small Block Chevy
- 12-Point Head
- Set of 12
- 1.670″ Overall Length
Popular 1967 Chevrolet Chevelle Exhaust Parts Categories
1967 Chevrolet Chevelle Exhaust Parts
You count on your 1967 Chevrolet Chevelle to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Exhaust Parts. With 102 Exhaust Parts ranging in price from $1.99 to $1,376.00, you’re sure to find everything you need for your 1967 Chevrolet Chevelle.
Brands matter. If you want to shop a specific Exhaust Parts brand, we stock 16 different brands like Felpro, Mr. Gasket, and Hooker Headers. 1967 Chevrolet Chevelle Exhaust Parts start as low as $1.99!
One of the best ways to find top quality OEM or aftermarket Exhaust Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 773 extensive product reviews on 1967 Chevrolet Chevelle Exhaust Parts. Some of the top-rated Exhaust Parts products we carry are High-Performance Headers with Fuel Economy and Leakproof Design with 3.0 stars and Terminator; Exhaust Tips with 4.0 stars.
Did we mention you can order your Exhaust Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Exhaust Parts inventory for your 1967 Chevrolet Chevelle below to get started!
Top-Rated Exhaust Parts Brands For Your 1967 Chevrolet Chevelle
Trusted Exhaust Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1967 Chevrolet Chevelle running right for years to come. In our inventory you’ll find brands like Felpro, Mr. Gasket, Hooker Headers, and even more.
Popular Flowmaster Inc. Exhaust Parts
You’ll find popular Flowmaster Inc. brand products across Exhaust Mufflers. All are waiting to get your 1967 Chevrolet Chevelle back on the road. Some of the top-rated Flowmaster Inc. products in these categories are:
from
$185.99
(1)
50 Series Muffler, 2.5in Offset Inlet 2.5in Offset Outlet, Non-Reversible, Moderate Sound
Mufflers
Top-Rated Felpro Exhaust Parts
If Felpro are what you’re looking for, our inventory holds plenty. We stock Felpro brand Exhaust Parts for your 1967 Chevrolet Chevelle, and some of our most reviewed Felpro parts include:
FAQs for 1967 Chevrolet Chevelle Exhaust Parts
What are the most purchased Exhaust Parts for the 1967 Chevrolet Chevelle?
Out of 102 Exhaust Parts for the 1967 Chevrolet Chevelle, the most popular in our inventory are:
from
$42.99
This product is not rated
Aluminum Exhaust Gasket: High-Heat Resistant, Easy Removal
Exhaust Manifold Gaskets
from
$27.49
(4)
Exhaust Gasket: High-Temperature Protection, Durability, and Reliable Sealing
Exhaust Manifold Gaskets
What are the top-rated 1967 Chevrolet Chevelle Exhaust Parts?
Top-rated Exhaust Parts for your 1967 Chevrolet Chevelle based on customer reviews/ratings are:
from
$227.99
(9)
High-Performance Headers with Fuel Economy and Leakproof Design
“It work perfect, best exhaust release and better performance 100% recomended”
from
$283.99
(4)
High-Performance Small Block Chevy Long Tube Headers
“You can’t go wrong with HOOKER HEADERS,Proud & loud”
