1966 Jeep CJ5 Exhaust Parts
More 1966 Jeep CJ5 Exhaust Parts Categories
If you’re looking for an original Exhaust Parts replacement for a 1966 Jeep CJ5, you can search through our selection below. You’ll also find aftermarket and OEM Exhaust Parts to meet your needs.
Essential 1966 Jeep CJ5 Exhaust Parts
Flowmaster Inc. – 50 Series Muffler, 2.5in Offset Inlet 2.5in Center Outlet, Non-Reversible, Moderate Sound (Part No.942551)
from
$154.99
The three chamber design utilizes Flowmaster’s patented Delta Flow technology along with an internal tuning chamber to reduce sound inside the vehicle. Provides the same performance and exterior tone characteristics as the two chamber, but with less interior resonance. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – 40 Series Muffler, 2.5in Offset Inlet 2.5in Center Outlet, Non-Reversible, Aggressive Sound (Part No.942541)
from
$133.99
This two chamber design incorporates Flowmaster’s patented Delta Flow technology. The Delta deflectors generate increased scavenging for better performance and reduced interior sound. Milder exterior tone and reduced interior resonance over Original 40 series. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Walker – Sound Solution Muffler (Part No.18601)
from
$58.99
Sound Solution mufflers are engineered with 100% aluminized steel for longer service life compared to low carbon steel. These mufflers have mechanical interior joints for durability, and spun-locked heads for resistance to rupture from backfires. Sound Solution mufflers are available in a universal fitment style, with both quality appearance and favorable acoustics.
Product Features:
See More
Product Features:
- Aluminized steel construction for corrosion resistance and durability
- Mechanical interior joints for durability
- Spun-locked heads for rupture resistance
- Tube-and-partition style interior design
- Universal mufflers may require modifications to complete installation
- Spot welded bushings provide stability and system support
- Some mufflers available with reinforced bracketed heads
Omix – Muffler (Part No.17609.02)
from
$109.99
Are you smelling exhaust in your Jeep? Is your exhaust getting louder? If so, your muffler may be bad. Omix-ADA offers high quality replacement mufflers to solve the problem.
Product Features:
See More
Product Features:
- Continuous Roving Fiberglass Filling
- Round
- OE Style
- Direct Fit
- Limited 5 Year Warranty
Walker – Clamp U-Bolt Bolt Dia 0.375 Length Nut Type Hex Pipe Dia 2.5 (Part No.35337)
from
$8.99
Complete your exhaust repair with an Exhaust Mate® U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from quality material for durability and long life
- BETTER TOGETHER — Use Walker® accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Clamp U-Bolt Bolt Dia 0.3125 Length Nut Type Hex Pipe Dia 1.5 (Part No.35325)
from
$1.99
Complete your exhaust repair with an Exhaust Mate® U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from quality material for durability and long life
- BETTER TOGETHER — Use Walker® accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Clamp U-Bolt Bolt Dia 0.375 Length Nut Type Hex Pipe Dia 2 (Part No.35335)
from
$1.99
Complete your exhaust repair with an Exhaust Mate® U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from quality material for durability and long life
- BETTER TOGETHER — Use Walker® accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Omix – Exhaust Manifold Gasket Set (Part No.17451.03)
from
$19.49
Are you smelling exhaust in your Jeep? Can you hear an exhaust leak? If so, it’s time to replace the exhaust manifold gasket. Omix-ADA offers high quality exhaust manifold gaskets to solve the problem.
Product Features:
See More
Product Features:
- Fiber
- Heat Resistant
- OE Style
- Direct Fit
- Limited 5 Year Warranty
Felpro – Exhaust Manifold Gasket Set (Part No.MS 90564)
from
$8.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Contains all gaskets and seals to remove and replace exhaust manifold
- Contains all gaskets and seals to remove and replace exhaust manifold
Remflex – Flexible Graphite, Set Of 2, 1-5/32 Inch X 1-11/16 Inch Square Port Size (Part No.10-003)
from
$47.99
Remflex unique flexible graphite material has been proven for more than 30 years in industrial applications, where temperatures routinely exceed 2,000 degrees – day after day, week after week, year after year. Now, they are bringing this technology to enthusiasts of all kinds to eliminate exhaust leaks for good Whether you have an old pick-up that needs a manifold gasket, or a race car with custom-built headers, you can be assured that Remflex exhaust gaskets will work properly the first time, every time.
Product Features:
See More
Product Features:
- 100 Percent Flexible Graphite Construction
- Designed To Withstand Clamping Force And Incredible Heat
- Eliminate Exhaust Leaks
- No Re-Torquing Necessary, Remflex Exhaust Gaskets Rebound 30 Percent, Creating An Optimum Seal That Eliminates The Need To Re-Torque
Hooker Headers – Super Competition Header Gasket (Part No.10801HKR)
from
$17.79
Hooker’s precision-matched Super Competition header gaskets provide a sure fit and unmatched exhaust sealing. This OEM quality gasket is constructed of a thick ,.060 inch, high temperature, non-asbestos fiber laminate with a perforated steel core, which provides a superior grip and adhesion. This construction also contributes to exact fit compliance between the cylinder head and header flange, offering excellent sealing properties during extreme temperature and operating conditions.
Product Features:
See More
Product Features:
- Tear Resistant
- Precisely Cut To Match Header
Felpro – Exhaust Pipe Flange Gasket (Part No.60299)
from
$4.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Walker – 2 Bolt Exhaust Pipe Flange Gasket: Fiber with Metal, Heat Resistant, Premium Materials (Part No.31309)
from
$2.79
Complete your exhaust repair with Walker┬« gaskets and flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.
Product Features:
See More
Product Features:
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizesfora quality vehicle repair
- HEAT RESISTANT — Designed to resist heat for long-lasting performance
- PREMIUM MATERIALS — Made from high-quality materials for durability and long life
- ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
- BETTER TOGETHER — Use premium Walker-½ accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Donut Exhaust Pipe Flange Gasket: Fiber with Metal, Heat Resistant, Premium Materials (Part No.31404)
from
$7.49
Complete your exhaust repair with Walker┬« gaskets and flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.
Product Features:
See More
Product Features:
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizesfora quality vehicle repair
- HEAT RESISTANT — Designed to resist heat for long-lasting performance
- PREMIUM MATERIALS — Made from high-quality materials for durability and long life
- ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
- BETTER TOGETHER — Use premium Walker-½ accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Felpro – Exhaust Pipe Flange Gasket (Part No.60592)
from
$10.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Walker – Hanger Length 4 (Part No.35183)
from
$15.99
Complete your exhaust repair with Walker® exhaust hangers. Designed with OE-style features to support undercar exhaust components, Walker hangers are manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
- OE DESIGN — Designed with OE-style features for easy installation
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS — Made from quality steel for durability and long life
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Hanger Length 6 (Part No.35209)
from
$13.49
Complete your exhaust repair with Walker® exhaust hangers. Designed with OE-style features to support undercar exhaust components, Walker hangers are manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
- OE DESIGN — Designed with OE-style features for easy installation
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS — Made from quality steel for durability and long life
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Omix – Exhaust Manifold Spring (Part No.17625.02)
from
$21.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.
Product Features:
See More
Product Features:
- Steel
- OE Style
- Direct Fit
- Limited 5 Year Warranty
Walker – Hanger Length 2.25 (Part No.35148)
from
$11.99
Complete your exhaust repair with Walker® exhaust hangers. Designed with OE-style features to support undercar exhaust components, Walker hangers are manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
- OE DESIGN — Designed with OE-style features for easy installation
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS — Made from quality steel for durability and long life
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Flowtech – Terminator; Exhaust Tips (Part No.59905FLT)
from
$85.99Product Features:
- Show Quality Chrome Platinum
- Durable Black Finish
- Can Be Welded Or Clamped
- Complete The System
- Glass-Packed Resonators
Walker – Tail Pipe Aluminized 8" (Part No.41134)
from
$39.49
Made from aluminized steel for durability, Walker® premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
Walker – Tail Pipe Aluminized 34.958" (Part No.43704)
from
$48.99
Made from aluminized steel for durability, Walker® premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
Omix – Exhaust Pipe (Part No.17608.01)
from
$67.99
Is your Jeep’s exhaust pipe bent or rusted out? Trying to pass your annual state Inspection or restore your Jeep back to stock? Omix-ADA offers high quality exhaust pipes, gaskets, and hangers to keep you on the road and trail.
Product Features:
See More
Product Features:
- Steel
- OE Style
- Direct Fit
- Limited 5 Year Warranty
Popular 1966 Jeep CJ5 Exhaust Parts Categories
1966 Jeep CJ5 Exhaust Parts
You count on your 1966 Jeep CJ5 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Exhaust Parts. With 11 Exhaust Parts ranging in price from $1.99 to $85.99, you’re sure to find everything you need for your 1966 Jeep CJ5.
Brands matter. If you want to shop a specific Exhaust Parts brand, we stock 3 different brands like Walker, Flowtech, and Felpro. 1966 Jeep CJ5 Exhaust Parts start as low as $1.99!
One of the best ways to find top quality OEM or aftermarket Exhaust Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 19 extensive product reviews on 1966 Jeep CJ5 Exhaust Parts.
Did we mention you can order your Exhaust Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Exhaust Parts inventory for your 1966 Jeep CJ5 below to get started!
Top-Rated Exhaust Parts Brands For Your 1966 Jeep CJ5
Trusted Exhaust Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1966 Jeep CJ5 running right for years to come. In our inventory you’ll find brands like Walker, Flowtech, Felpro, and even more.
Popular Walker Exhaust Parts
You’ll find popular Walker brand products across Exhaust Pipes and Exhaust Mufflers. All are waiting to get your 1966 Jeep CJ5 back on the road. Some of the top-rated Walker products in these categories are:
Top-Rated Exhaust Parts
If are what you’re looking for, our inventory holds plenty. We stock brand Exhaust Parts for your 1966 Jeep CJ5, and some of our most reviewed parts include:
FAQs for 1966 Jeep CJ5 Exhaust Parts
What are the most purchased Exhaust Parts for the 1966 Jeep CJ5?
Out of 11 Exhaust Parts for the 1966 Jeep CJ5, the most popular in our inventory are:
from
$2.79
This product is not rated
2 Bolt Exhaust Pipe Flange Gasket: Fiber with Metal, Heat Resistant, Premium Materials
Exhaust Pipe and Flange Gaskets
