1966 International M800 Filters and PCVs

Essential 1966 International M800 Filters and PCVs

Carquest Premium – Full-Flow Lube Spin-on (Part No.85049)

Full-Flow Lube Spin-on

from

$21.29
Carquest spin-on lube filters protect your engine from wear particles that can otherwise lead to premature parts failure.

Product Features:
  • Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
  • Made in USA
  • Includes Anti-Drainback Valve
See More

Carquest Standard – Oil Filter: Ideal for Conventional Oil, Protection up to 5,000 Miles (Part No.R85516)

Oil Filter: Ideal for Conventional Oil, Protection up to 5,000 Miles

from

$5.49
Carquest Standard oil filters are designed to meet the original equipment (O.E.) specifications and the requirements for maintaining new vehicle warranties. Our oil filters use nitrile sealing gaskets and solid steel baseplates to prevent oil leaks. Carquest Standard oil filters feature cellulose media for increased efficiency at capturing dirt and debris. Each Carquest Standard oil filter is built with rugged components for durability and utilizes multifiber, high-density media for optimal engine protection up to 5,000 miles.

Product Features:
  • Protection for up to 5,000 miles
  • Cellulose media provides 95.1% efficiency at 20 Microns for increased engine protection
  • Nitrile anti-drain back valve for engine start-up protection
  • Lathe cut nitrile sealing gasket prevents leaks
  • Double fluted spiral wound center tube allows maximum flow and provides additional strength
  • Solid steel baseplate provides additional strength to resist leakage
  • Meets requirements for maintaining new vehicle warranties
See More

Carquest Premium – Oil Filter: Ideal for Synthetic Oil, Protection up to 10,000 Miles (Part No.85516)

Oil Filter: Ideal for Synthetic Oil, Protection up to 10,000 Miles

from

$7.79
Carquest Premium oil filters are built for durability, utilizing enhanced components to protect engines for the extended drain intervals of modern vehicles using conventional or synthetic lubricants. Our oil filters are built with synthetic blend media that provides 2X the capacity and up to 10,000 miles of protection. Carquest Premium filters feature silicone sealing gaskets for better performance in extreme temperatures. Carquest Premium oil filters meet or exceed original equipment (O.E.) specifications and meet the requirements for maintaining a new vehicle warranty.

Product Features:
  • Protection for up to 10,000 miles
  • Synthetic blend media provides 99.5% efficiency at 20 microns and 2X capacity vs. Standard filters
  • Solid metal end caps are designed to be long lasting
  • Silicone anti-drain back valve for engine start-up protection
  • Heavy-duty steel baseplate provides additional strength to resist leakage
  • Heavy gauge steel canister withstands high pressure operating conditions
  • Silicone sealing gasket performs better in extreme temperature conditions and longer drain intervals (silicone gasket is new feature introduced as a running change)
  • Meets requirements for maintaining new vehicle warranties
See More

K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-3001)

Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine

from

$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.

Product Features:
  • HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
  • VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
  • PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
  • EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
  • EASY TO REMOVE: Fast and easy Wrench-Off removal
  • HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
  • HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
See More

FRAM Titanium – Spin-on Oil Filter: Ideal For Synthetic Oil Protection to 20,000 miles (Part No.FS8A)

Spin-on Oil Filter: Ideal For Synthetic Oil Protection to 20,000 miles

from

$15.99
FRAM Titanium advanced high-flow synthetic oil filters offer ultimate engine protection for up to 20,000 miles (32,000 kilometers). Engineered with premium synthetic blend media, FRAM Titanium provides over 99% dirt trapping efficiency.

Product Features:
  • Proven protection for up to 20,000 miles
  • Total Grip textured surface for easy install and removal
  • Silicone anti-drain back valve helps ensure safe engine start up
  • FRAM Powerflow technology allows for efficient oil flow over the filter media
See More

Carquest Standard – Oil Filter: Ideal for Conventional Oil, Protection up to 5,000 Miles (Part No.R85522)

Oil Filter: Ideal for Conventional Oil, Protection up to 5,000 Miles

from

$5.49
Carquest Standard oil filters are designed to meet the original equipment (O.E.) specifications and the requirements for maintaining new vehicle warranties. Our oil filters use nitrile sealing gaskets and solid steel baseplates to prevent oil leaks. Carquest Standard oil filters feature cellulose media for increased efficiency at capturing dirt and debris. Each Carquest Standard oil filter is built with rugged components for durability and utilizes multifiber, high-density media for optimal engine protection up to 5,000 miles.

Product Features:
  • Protection for up to 5,000 miles
  • Cellulose media provides 95.1% efficiency at 20 Microns for increased engine protection
  • Nitrile anti-drain back valve for engine start-up protection
  • Lathe cut nitrile sealing gasket prevents leaks
  • Double fluted spiral wound center tube allows maximum flow and provides additional strength
  • Solid steel baseplate provides additional strength to resist leakage
  • Meets requirements for maintaining new vehicle warranties
See More

Mobil 1 – Extended Performance Oil Filter (Part No.M1-206)

Extended Performance Oil Filter

from

$14.99
The Mobil1 Extended Performance Oil Filter utilizes synthetic fibers to leave your vehicle with cleaner oil and an engine that performs better and lasts longer. When used with Mobil 1 fully synthetic motor oil, this filter offers dependable protection for your engine.

Product Features:
  • Designed for today’s longer service intervals.
  • Advanced synthetic fiber-blend filter media for enhanced contaminant removal.
  • High-capacity design stores an increased amount of contaminants.
  • Reduces resistance to oil flow while improving filter efficiency.
  • Withstands up to 5x the normal system operating pressure.
See More

ACDelco – Engine Oil Filter (Part No.PF2)

Engine Oil Filter

from

$8.29
An ACDelco Professional, premium aftermarket E Oil Filter features a revolutionary design allowing the engine oil filter to function better while being lighter and more easily recycled than traditional filters. This filter fits your GM vehicle, as well as a wide range of other vehicles on the road today. Its unique element design yields more filtering area in a smaller canister. New thermal bonding techniques and non-metallic end caps improve the overall seal as well as remove wasted media rendered non-functional by adhesives used in traditional filters. This can represent as much as 15% of the total media capacity. This premium aftermarket replacement E oil filter is manufactured to meet your expectations for fit, form, and function.

Product Features:
  • Is 20-25% smaller in size, yet has more filtration media for greater capacity
  • Has 10 times more open area in the core for improved flow
  • Has a steel shell, threaded plate assembly, and leaf spring that can all be recycled
  • Has a non-metallic cartridge that can be crushed to remove oil and can then be used as an energy source
  • Has a lubricity gasket for reduced installation torque
  • Has a full cover baseplate for easy installation in blind applications
  • Has a nylon core for higher strength and better flow characteristics
  • No metallic components on ‘clean side’ of filter media, therefore eliminating possible metallic contamination
  • Injection molded nylon core increases the structural strength to almost twice that of a traditional metal core
  • Synthetic end caps are ultrasonically welded to prevent media blocked by adhesives used in traditional filters
See More

Motorcraft – Original Equipment Oil Filter: Ideal for Any Type Oil, Built To Meet Ford’s Standards (Part No.FL-1A)

Original Equipment Oil Filter: Ideal for Any Type Oil, Built To Meet Ford's Standards

from

$14.99
The Motorcraft Original Equipment Oil Filter is designed, engineered and recommended by Ford Motor Company. This filter helps protect against engine wear by screening out abrasives, such as carbon, sand, dust and bits of metal before they can get into your oil.

Product Features:
  • Pressure-relief valves help minimize the chance of contaminated oil circulating back into the engine
  • Pressure-relief valves also help maintain the supply of oil to the engine under extreme cold conditions or if the filter gets clogged
  • Steel cases are “ironed” for a precise fit, fluted to ease removal and painted to resist rust
  • Efficient filter media offers increased dirt-collecting capability and ability to capture more engine-harming particles
See More

Imperial – Remote Mount Filter Kit – Universal (Part No.240291)

Remote Mount Filter Kit - Universal

from

$95.99
For use when relocating the oil filter is necessary. Includes all required hardware except hoses.

Product Features:
  • Remote mount filter kit
  • For use when relocation of the oil filter is necessary
  • Comes with all necessary hardware except hoses
See More

Purolator – Fuel Filter (Part No.F59221)

Fuel Filter

from

$6.49
A clogged fuel filter could lead to contaminants in the engine fluid – a common source of engine system failures. Protect fuel pumps and fuel injectors from these costly malfunctions. A Purolator® Fuel Filter scrubs fuel clean of dirt, rust and other contaminants for smooth and efficient engine performance.

Product Features:
  • Removes water from the fuel system
  • Prevents rust and corrosion in your engine
  • Keeps fuel contaminant free
  • Replace annually for peak performance
  • Meets or exceeds OE specifications
See More

Carquest Premium – 5/16" Inlet-Outlet Plastic In-Line Fuel Filter (Part No.86002)

5/16" Inlet-Outlet Plastic In-Line Fuel Filter

from

$6.49
CARQUEST offers high quality, high efficiency fuel filters for automotive, medium and heavy trucks as well as farm, construction, mining and other equipment applications.

Product Features:
  • Keeps dirt, debris and contaminants from clogging fuel lines and causing erratic, unstable fuel performance
  • Manufactured to a strict quality standards with 98% efficiency at a 10 micron rating.
  • Provides maximum fuel system protection.
  • Designed to meet or exceed Original Equipment specifications
  • Protects the injectors from debris that cause damage and clogging.
  • Provides less restriction preventing the fuel pump from working too hard.
  • Superior materials, design and construction ensure CARQUEST fuel filters provide excellent performance under all types of operating conditions.
See More

Carquest Premium – Fuel Element (Part No.86943)

Fuel Element

from

$12.99
CARQUEST HD filters are designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.

Product Features:
  • Conventional cartridge fuel filter
  • Made in USA
See More

Carquest Premium – 5/16" Inlet-Outlet Metal In-Line Fuel Filter (Part No.86032)

5/16" Inlet-Outlet Metal In-Line Fuel Filter

from

$7.79
CARQUEST offers high quality, high efficiency fuel filters for automotive, medium and heavy trucks as well as farm, construction, mining and other equipment applications.

Product Features:
  • Keeps dirt, debris and contaminants from clogging fuel lines and causing erratic, unstable fuel performance
  • Manufactured to a strict quality standards with 98% efficiency at a 10 micron rating.
  • Provides maximum fuel system protection.
  • Designed to meet or exceed Original Equipment specifications
  • Protects the injectors from debris that cause damage and clogging.
  • Provides less restriction preventing the fuel pump from working too hard.
  • Superior materials, design and construction ensure CARQUEST fuel filters provide excellent performance under all types of operating conditions.
See More

1966 International M800 Filters and PCVs

You count on your 1966 International M800 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Filters and PCVs. With 9 Filters and PCVs ranging in price from $5.99 to $95.99, you’re sure to find everything you need for your 1966 International M800.

Brands matter. If you want to shop a specific Filters and PCVs brand, we stock 5 different brands like Fram, Carquest Premium, and K&N. 1966 International M800 Filters and PCVs start as low as $5.99!

One of the best ways to find top quality OEM or aftermarket Filters and PCVs is by asking professionals. Short of that, you can shop with confidence thanks to our 340 extensive product reviews on 1966 International M800 Filters and PCVs. Some of the top-rated Filters and PCVs products we carry are Remote Mount Filter Kit – Universal with 2.8 stars and Fuel Filter with 5.0 stars.

Did we mention you can order your Filters and PCVs from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Filters and PCVs inventory for your 1966 International M800 below to get started!

Top-Rated Filters and PCVs Brands For Your 1966 International M800

Trusted Filters and PCVs OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1966 International M800 running right for years to come. In our inventory you’ll find brands like Fram, Carquest Premium, K&N, and even more.

Popular K&N Filters and PCVs

You’ll find popular K&N brand products across Oil Filters. All are waiting to get your 1966 International M800 back on the road. Some of the top-rated K&N products in these categories are:

FAQs for 1966 International M800 Filters and PCVs

What are the most purchased Filters and PCVs for the 1966 International M800?

Out of 9 Filters and PCVs for the 1966 International M800, the most popular in our inventory are:
Spin-on Oil Filter: Ideal For Any Type of Oil Protection to 15,000 miles
from $9.99
This product is not rated
Spin-on Oil Filter: Ideal For Any Type of Oil Protection to 15,000 miles
Oil Filters
Spin-on Oil Filter: Ideal for Conventional Oil, Protection up to 7,500 miles
from $5.99
This product is not rated
Spin-on Oil Filter: Ideal for Conventional Oil, Protection up to 7,500 miles
Oil Filters
Spin-on Oil Filter: Ideal For Synthetic Oil Protection to 20,000 miles
from $15.99
This product is not rated
Spin-on Oil Filter: Ideal For Synthetic Oil Protection to 20,000 miles
Oil Filters

What are the top-rated 1966 International M800 Filters and PCVs?

Top-rated Filters and PCVs for your 1966 International M800 based on customer reviews/ratings are:
Remote Mount Filter Kit - Universal
from $95.99
(4)
Remote Mount Filter Kit – Universal
“I wanted to standardize my vehicle oil filter purchases and installing this unit on my 4 vehicles allows me to do this. I only purchase the Fram Ultra”
Fuel Filter
from $6.49
(2)
Fuel Filter
“This is a perfect fit for the stock fuel pump for the early ’60s Y-block Ford engine. My ’59 Galaxie has the fuel pump for the early 60s engine (not ”