1966 Ford LTD Differentials

Find your specific 1966 Ford LTD original or aftermarket Differentials below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.

Essential 1966 Ford LTD Differentials

from

$10.49

Product Features:

SOLID SPACER FORD 8.8″ & 9″

from

$209.99

Product Features:

Spider gear kit
Fits Ford 8.8″ 28 spline open differential
Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.

from

$5.99

Fine thread pinion support bolt (aftermarket aluminum only) for 9″ Ford.

Product Features:

Pinion support bolt for Ford 9″
3/8″ x 24 thread
1.5″ long

from

$41.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
High radial load capacity makes them suitable for high speed applications
Industry leading coverage
Professional technicians know they can depend on National

from

$689.99

The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:

Carrier bearing puller
Works with an impact gun to safely and easliy remove carrrier bearings
Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications

from

$3.99

Adjuster lock bolt 3.062″ & 3.250″ Yukon Ford 9″ Drop Out.

Product Features:

Side adjuster lock bolt

from

$119.99

8.8″ FORD 09 & DWN PINION KIT .

Product Features:

Fits 2009 and down Ford 8.8″
Uses Koyo bearings and races
Included are pinion bearings and races, pinion seal, pinion nut, crush sleeve, marking compound and brush.

from

$289.99

Good used Yukon yoke for Ford 8″ with a 1310 U/joint size. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:

Fits Ford 8″
25 spline
1310 u-joint size
Outside snap ring design
3.219″ snap ring span
1.062″ cap diameter
U-bolt style

from

$1.99

Product Features:

Ford 7.5″, 8.8″ Ring Gear Bolt

from

$649.99

The Spartan Locker, by USA Standard Gear, provides reliable traction at a low cost. Give your vehicle great traction and save some cash. Choose a Spartan Locker for better traction. The Spartan locker by USA standard gear is a mechanical locker that replaces the spiders in a standard case. The Spartan locker’s design does not use the thrust washers and has a revolutionary spring and pin design that makes installation a snap! The couplers and drivers are made from 9310 steel, for added strength. Each Spartan locker carries a one year warranty against defect.

Product Features:

Fits Ford 8.8″ with 31 spline axles and 7/8″ cross pin shaft
Made from 9310 steel for added strength
Replaces the spiders in a standard carrier case

from

$219.99

Product Features:

Fits Ford 9″ with 28 spline pinion
Larger inner pinion bearing reduces gear deflection under high load
6061 aluminum
Annodized purple
Does not include races

from

$4.99

STAR washers, 3.062″ Yukon Ford 9″ Drop Out new design ONLY.

Product Features:

Star washer
Fits Ford 9″
3.062″ designs only

from

$167.99

Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:

Fits 2009 and down Ford 8.8″
Included are pinion bearings and races, pinion seal, crush sleeve , complete pinion shim kit, and marking compound with brush.

from

$15.29

TAPERED ROLLER BEARI

from

$18.49

Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:

All products are designed to meet or exceed OE quality, form, fit and funtion.

from

$8.99

Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:

All products are designed to meet or exceed OE quality, form, fit and funtion.

from

$49.99

Product Features:

USA Standard Gear heavy-duty cross pin shaft
Fits Ford 9″
Works with Spartan Locker or standard open spider gears
Long shaft

from

$5.99

Product Features:

Side gear thrust washer for Ford 8″, Ford 9″ and AMC Model 20
0.030″ thick

from

$94.99

3.062″ side adjuster, Only Fits Yukon Ford 9″ Drop Out, new design ONLY.

Product Features:

Side adjuster
Fits Ford 9″
3.062″ designs only

from

$8.99

Pinion gear thrust washer (0.750″ shaft) for 8.8″ Ford.

Product Features:

Pinion gear thrust washer
Fits Ford 8.8″
0.750″ I.D.

from

$379.99

8.8″ 28 spline standard Open bare case (incl REVERSE) 3/4″ cross pin Hole.

Product Features:

Standard open carrier case
Does not include spider gears
Fits Ford 8.8″ with 28 spline axles
3/4″ cross pin bore

from

$8.99

Replacement outer oil slinger for Ford 7.5″, 8.8″, 9″, 10.25″, Nissan Titan rear, Dana 44 Rubicon & 44 JK non-Rubicon.

Product Features:

Outer oil slinger for Ford 10.25″, 7.5″, 8.8″ and 9″ also Jeep JK and Nissan Titan rear

from

$9.99

8″ Ford O-ring.

Product Features:

Pinion support o-ring
Fits Ford 8″

from

$31.99

Product Features:

MINI SPOOL 8″ & 9″ 31 SPLN STL 090431

from

$33.99

Product Features:

MINI INSTALL KIT FORD 9″

from

$729.99

9″ Yukon 3.062″ aluminum case, HD dropout housing with forged caps. The Yukon aluminum dropouts feature a adjuster lock which is offset 90 degrees, offering an uninterrupted bearing cap for higher strenth. Made from A356-T6 aluminum and featuring a through-bolt desgin, this dropout is built for high horsepower & tall tires.Rated up to 1000HP!

Product Features:

Fits Ford 9″
3.062″ carrier race diameter
A356-T6 aluminum
Thru-bolt design added strength

from

$99.99

Product Features:

Trac Loc spring for Ford 8.8″
31 spline applications only

from

$10.99

Crush Sleeve for Model 35, Chrysler 7.25″, 8.25″ Ford 8″ & GM 7.75″. Approx 0.495″ long.

Product Features:

Crush sleeve for AMC Model 35, Chrysler 7.25″ and 8.25″, Ford 8″ and GM 7.75″
0.495″ tall

Popular 1966 Ford LTD Differentials Categories

Differential Oil

Rear Differential Cover Gaskets

Differential Open Unit and Components

Differential Bearings

Differential Pinion Pilot Bearings

Differential Carriers

Differential Bearing Kits

Front Differential Pinion Bearings

Differential Spider Gear Kits

Differential Rebuild Kits

Differential Carrier Shim Kits

Differential Pinion Seals

Differential Clutch Packs

Differential Mini Spools

Differential Ring and Pinions

Differential Cases

Differential End Yokes

Differential Pinion Supports

Differential Spools

Differential Lock Springs

Differential Carrier Bearing Adjusters

Automatic Transmission Differential Cover Gaskets

Differential Pinion Bearing Kits

Differential Ring Gear Bolts

Bearing Race Drivers

Differential Crush Sleeves

Differential Side Bearing Spacers

Differential Pinion Shims

Differential Pinion Shaft Nuts

Differential Gear Install Kits

Differential Cross Pins

Differential Housing O-Rings

Differential Side Gear Thrust Washers

Differential Pilot Bearing

Differential Pinion Gear Thrust Washers

Differential Drive Pinion Gear Bearing Retainer Bolts

Differential Drive Pinion Oil Deflectors

Limited Slip Differential Assemblies

Differential Clutch Pack Clips

Differential Lock Washers

Differential Pinion Bearing Spacers

Differential Bearing Adjuster Nut Lock Bolts

Differential Carrier Bearing Races

Maybe you’re in the middle of a full rebuild of that 1966 Ford LTD. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 374 different Differentials in our inventory ranging from $1.99 to $1,566.99. That means you can find the exact parts or products you need to keep that 1966 Ford LTD running smoothly.

Differentials are only as good as their brand. We stock 11 different brands to make sure you have plenty of trusted parts to choose from for your 1966 Ford LTD. Driveworks, Yukon Gear, and National are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 1966 Ford LTD, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 269 reviews in this category, some of the top rated parts include Multi Purpose Seal with 5.0 stars and Shaft Repair Sleeve with 5.0 stars.

So if you’re in the market for aftermarket Differentials to keep your 1966 Ford LTD rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 1966 Ford LTD Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1966 Ford LTD demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your LTD the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular Felpro Differentials

We carry Felpro parts in our stock across Automatic Transmission Differential Cover Gaskets categories, plus more. For a 1966 Ford LTD, our most popular Felpro Differentials include:

from $8.49

(9)

Differential Carrier Gasket

Automatic Transmission Differential Cover Gaskets

Top 1966 Ford LTD Differentials from Driveworks

Driveworks products are another trusted brand when it comes to Differentials for your 1966 Ford LTD. Popular Driveworks parts include:

from $13.99

(14)

Tapered Cone/Cup Wheel Bearing Set

Front Differential Pinion Bearings

from $4.29

(1)

Oil Seal

Differential Pinion Seals

FAQs for 1966 Ford LTD Differentials

What are the most purchased Differentials for the 1966 Ford LTD?

Out of 374 Differentials for the 1966 Ford LTD, the most popular in our inventory are:

from $57.99

This product is not rated

3 Qt – 80W90 Conventional Gear Oil With Posi Additive

Differential Oil

from $5.99

This product is not rated

Pinion Crush Sleeves

Differential Crush Sleeves

from $8.99

This product is not rated

Bearings

Differential Bearings

What are the top-rated 1966 Ford LTD Differentials?

Top-rated Differentials for your 1966 Ford LTD based on customer reviews/ratings are:

from $15.79

(3)

Multi Purpose Seal

“good quality”

from $43.99

(2)

Shaft Repair Sleeve

“As a mechanic I dont have time or money to waste on inferior products, which this is not. Great product,great price”

from $38.49

(2)

Bearings

“nice finish and function. Should perform well.”

1966 Ford LTD Differentials

More 1966 Ford LTD Differentials

Essential 1966 Ford LTD Differentials

Motive Gear – Differential Pinion Solid Spacer Kit w/Shims (Part No.4104)

USA Standard Gear – Standard Spider Gear Set For Ford 8.8", 28 Spline (Part No.39015)

Yukon Gear – Fine Thread Pinion Support Bolt (Aftermarket Aluminum Only) For 9" Ford (Part No.33243)

National – Bearings (Part No.R-1535-TAV)

Yukon Gear – The Carrier Bearing Puller (Part No.56034)

Yukon Gear – Adjuster Lock Bolt 3.062" & 3.250" Ford 9" Drop Out (Part No.32149)

USA Standard Gear – Pinion Installation Kit For ’09 & Down Ford 8.8 (Part No.60009)

Yukon Gear – Good Used Yoke For Ford 8" With A 1310 U/Joint Size (Part No.41047)

Motive Gear – Ring Gear Bolt (Part No.D5AZ4216A)

USA Standard Gear – Spartan Locker For Ford 8.8", 31 Spline, Includes Heavy-Duty Cross Pin Shaft (Part No.17005)

Yukon Gear – Purple Aluminum Pinion Supprt For 9" Ford Daytona (Part No.32161)

Yukon Gear – Star Washers, 3.062" Ford 9" Drop Out New Design Only (Part No.32143)

Yukon Gear – Pinion Install Kit For Ford 8.8" Differential (Part No.13041)

FAG US – TAPERED ROLLER BEARI (Part No.KT17)

Pro-King – Differential Pinion Shim Kit (Part No.742G200A)

Pro-King – Differential Bearing Cup (Part No.742G256)

USA Standard Gear – 9" Ford Spartan Locker Cross Pin, Long (Part No.17021)

Yukon Gear – Dana 44, Ford 8" / 9", And Model 20 Side Gear Thrust Washer Replacement (Part No.33283)

Yukon Gear – 3.062" Side Adjuster For Ford 9" (Part No.32139)

Yukon Gear – Pinion Gear And Thrust Washer (0.750" Shaft) For 8.8" Ford (Part No.33297)

Yukon Gear – Standard Open Carrier Case, Ford 8.8", 28 Spline (Part No.20076)

Yukon Gear – Outer Oil Slinger For Ford 7.5", 8.8", 9", 10.25" (Part No.33022)

Yukon Gear – 8" Ford O-Ring (Part No.30027)

Motive Gear – Differential Mini Spool (Part No.MS9-31)

Motive Gear – Differential Gear Install Kit (Part No.F9IK)

Yukon Gear – Ford 9" 3.062" Aluminum Case, HD Dropout Housing (Part No.32034)

Yukon Gear – Trao Loc Spring For Ford 8.8", 31 Spline (Part No.33516)

Yukon Gear – Crush Sleeve (Part No.33093)

Popular 1966 Ford LTD Differentials Categories