1966 Ford F-350 Pickup Universal Joints

Essential 1966 Ford F-350 Pickup Universal Joints

Driveworks – Universal Joint (Part No.DW-355)

Universal Joint

from

$15.99
DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).

Product Features:
  • The cross is hot forged for the higher torque and horsepower
  • The bearing cups are made by cold forging, having higher strength and better rigidity
  • Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
  • Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
  • Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
  • Snap rings are held to strict tolerances to ensure proper cup position and retention
  • Nitrile rubber seals to optimize grease retention and reduce contamination
See More

Yukon Gear – Chrome Moly Superjoint, Replacement For Dana 60 (Part No.32086)

Chrome Moly Superjoint, Replacement For Dana 60

from

$604.99
Product Features:
  • Fits Dana Spicer 60
  • 4340 Chromoly cross
  • Eliminated needle bearings results in larger trunion for added strength
  • Uses ultra high grade antiseize for lubrication
  • Not recommended for daily driven use
  • One complete joint and four full circle snap rings
See More

MOOG Driveline Products – Non-Greaseable Super Strength Universal Joint (Part No.253)

Non-Greaseable Super Strength Universal Joint

from

$28.99
Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • CORROSION PROTECTION — Exclusive MICRO SHIELDâ„¢ coating protects against rust and corrosion
  • KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
See More

MOOG Driveline Products – Non-Greaseable Super Strength Universal Joint (Part No.269)

Non-Greaseable Super Strength Universal Joint

from

$32.99
Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • CORROSION PROTECTION — Exclusive MICRO SHIELDΓ┐ó coating protects against rust and corrosion
  • KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
See More

Neapco – Universal Joint (Part No.1-0278)

Universal Joint

from

$7.19
Universal Joint
See More

MOOG Driveline Products – Greaseable Super Strength Universal Joint (Part No.272)

Greaseable Super Strength Universal Joint

from

$72.99
Backed by superior materials and rigorous testing, MOOG Super Strength® universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
  • CORROSION PROTECTION — Exclusive MICRO SHIELD coating protects against rust and corrosion
  • STRONG AND DURABLE — Cold-forged, case-hardened and precision-ground alloy steel crosses for durability
  • KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
  • GREASABLE DESIGN — Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
See More

Spicer – Universal Joint (Part No.5-1410X)

Universal Joint

from

$51.99
You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you’re getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
See More

Driveworks – Universal Joint (Part No.DW-369)

Universal Joint

from

$15.99
DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).

Product Features:
  • The cross is hot forged for the higher torque and horsepower
  • The bearing cups are made by cold forging, having higher strength and better rigidity
  • Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
  • Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
  • Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
  • Snap rings are held to strict tolerances to ensure proper cup position and retention
  • Nitrile rubber seals to optimize grease retention and reduce contamination
See More

MOOG Driveline Products – Non-Greaseable Super Strength Universal Joint (Part No.271)

Non-Greaseable Super Strength Universal Joint

from

$73.99
Backed by superior materials and rigorous testing, MOOG Super Strength® universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
  • CORROSION PROTECTION — Exclusive MICRO SHIELD coating protects against rust and corrosion
  • STRONG AND DURABLE — Cold-forged, case-hardened and precision-ground alloy steel crosses for durability
  • KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
See More

Yukon Gear – 1310 U/Joint With Zerk Fitting On Cross (Part No.42008)

1310 U/Joint With Zerk Fitting On Cross

from

$44.99
Yukon 1310 U/Joint with zerk fitting on cross. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring.
See More

Driveworks – Universal Joint (Part No.DW-354)

Universal Joint

from

$15.99
DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).

Product Features:
  • The cross is hot forged for the higher torque and horsepower
  • The bearing cups are made by cold forging, having higher strength and better rigidity
  • Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
  • Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
  • Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
  • Snap rings are held to strict tolerances to ensure proper cup position and retention
  • Nitrile rubber seals to optimize grease retention and reduce contamination
See More

Yukon Gear – 1480 Lifetime Series U/Joint (Part No.42024)

1480 Lifetime Series U/Joint

from

$104.99
Yukon 1480 Lifetime Series U/Joint. 4.188″ span ring span. 1.375″ cap diameter. Outside snap ring. This U/Joint is an axle U/Joint.
See More

MOOG Driveline Products – Greaseable Super Strength Universal Joint (Part No.235)

Greaseable Super Strength Universal Joint

from

$34.99
Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • CORROSION PROTECTION — Exclusive MICRO SHIELDΓ┐ó coating protects against rust and corrosion
  • GREASABLE DESIGN — Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
  • KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
See More

Spicer – Universal Joint (Part No.5-7438X)

Universal Joint

from

$46.99
You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you’re getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
See More

Yukon Gear – 1480 U-Bolt Kit (Part No.41191)

1480 U-Bolt Kit

from

$52.99
1480 U-bolt kit.

Product Features:
  • U-Bolt kit
  • 1480 u-joint size
See More

Yukon Gear – Dana 44, 8.2", 12P, 12T, Vet, And Model 20 U-Bolts (Part No.41198)

Dana 44, 8.2", 12P, 12T, Vet, And Model 20 U-Bolts

from

$34.99
1310 U-bolts, 5/16″ x 1-3/8″ Dana 30, Dana 44, 8.2″, 12P, 12T, VET, Model 20.

Product Features:
  • u-joint u-bolt kit
  • Fits AMC Model 20, Dana Spicer 30 and 44, GM 8.2″, 12 bolt passenger car and truck and 1963-1979 Corvette
  • 1310 u-joint size
  • Includes two u-bolts and four nuts
See More

MOOG Driveline Products – Universal Joint U-Bolt Kit (Part No.534-10)

Universal Joint U-Bolt Kit

from

$11.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • For U-Joints 375, 430, 434 & 498
  • Fits 1-1/8″ bearings
See More

MOOG Driveline Products – Universal Joint U-Bolt Kit (Part No.329-10)

Universal Joint U-Bolt Kit

from

$9.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • For U-Joints 353, 354, 361, 369 & 497
  • Fits 1-1/16″ bearings
See More

Dorman – Help – U-Joint Bolt Kit (Part No.81004)

U-Joint Bolt Kit

from

$6.29
This universal joint U-bolt kit is designed to match the original components required to repair and resecure universal joints on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this universal joint U-bolt kit is designed to match the original components required to repair and resecure universal joints on specified vehicles
  • Ideal solution – this kit is a reliable replacement for original components that are missing or have failed due to fatigue
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Yukon Gear – 1350 & 1410 U/Joint U-Bolts, 3/8" X 1-11/16", Kit (Part No.41190)

1350 & 1410 U/Joint U-Bolts, 3/8" X 1-11/16", Kit

from

$16.99
1350 & 1410 U/joint U-bolts, 3/8″ X 1-11/16″, kit.

Product Features:
  • u-joint u-bolt kit
  • Fits 1350 and 1410 u-joint size
  • Includes two u-bolts and four nuts
See More

Yukon Gear – 1330 U/Joint U-Bolts, 5/16" X 1-9/16", (7260 & 7290 Billet) (Part No.41199)

1330 U/Joint U-Bolts, 5/16" X 1-9/16", (7260 & 7290 Billet)

from

$15.99
1330 U/joint U-bolts, 5/16″ X 1-9/16″, (7260 & 7290 BILLET).

Product Features:
  • u-joint u-bolt kit
  • Fits AMC Model 20, Dana Spicer 30 and 44, GM 8.2″, 12 bolt passenger car and truck and 1963-1979 Corvette
  • 1330 u-joint size
  • Includes two u-bolts and four nuts
See More

1966 Ford F-350 Pickup Universal Joints

Maybe you’re in the middle of a full rebuild of that 1966 Ford F-350 Pickup. Maybe you just need a couple of Universal Joints. Either way, Advance Auto Parts has 9 different Universal Joints in our inventory ranging from $4.49 to $35.99. That means you can find the exact parts or products you need to keep that 1966 Ford F-350 Pickup running smoothly.

Universal Joints are only as good as their brand. We stock 4 different brands to make sure you have plenty of trusted parts to choose from for your 1966 Ford F-350 Pickup. Moog, Driveworks, and Spicer are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Universal Joints for your 1966 Ford F-350 Pickup, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 1,095 reviews in this category, some of the top rated parts include Universal Joint with 1.0 stars.

So if you’re in the market for aftermarket Universal Joints to keep your 1966 Ford F-350 Pickup rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Universal Joints Brands To Make Your 1966 Ford F-350 Pickup Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1966 Ford F-350 Pickup demands trusted brand parts and products to keep it running. Many trusted brands of Universal Joints make up Advance Auto Parts’ inventory, and all are ready to help make your F-350 Pickup the best it can be. Be sure to browse some of our top Universal Joints brands and parts.

Popular Spicer Universal Joints

We carry Spicer parts in our stock across U-Joints categories, plus more. For a 1966 Ford F-350 Pickup, our most popular Spicer Universal Joints include:
Universal Joint
from $35.99
(2)
Universal Joint
U-Joints

FAQs for 1966 Ford F-350 Pickup Universal Joints

What are the most purchased Universal Joints for the 1966 Ford F-350 Pickup?

Out of 9 Universal Joints for the 1966 Ford F-350 Pickup, the most popular in our inventory are:
Universal Joint
from $15.99
(33)
Universal Joint
U-Joints
Universal Joint U-Bolt Kit
from $9.99
(4)
Universal Joint U-Bolt Kit
U-Joint U-Bolt Kits
Universal Joint
from $6.49
(1)
Universal Joint
U-Joints

What are the top-rated 1966 Ford F-350 Pickup Universal Joints?

Top-rated Universal Joints for your 1966 Ford F-350 Pickup based on customer reviews/ratings are:
Universal Joint
from $4.49
(1)
Universal Joint
“Rubicon uses a 1330 series u joint, not a 1310 series that this joint is. The correct one is a 2-4800 (spicer part #5-213x). The 2-4800 joint is also”