1966 Dodge D200 Series Drivetrains

Below you will find various in-demand Dodge Drivetrains, components and accessories for your 1966 D200 Series. Advance Auto Parts has popular D200 Series parts like Spindles, Universal Joints, Transfer Cases and more. You’ll also find aftermarket and OEM Drivetrains for other D200 Series model years including 1960, 1961, 1962, 1963, 1964, 1965, 1967 and more. Select a category of 1966 Dodge D200 Series Drivetrains below and start saving instantly.

Popular 1966 Dodge D200 Series Drivetrains Categories

Differential Oil

U-Joints

Rear Differential Cover Gaskets

Drive Shaft Center Supports

Differential Open Unit and Components

Differential Covers

Center Support Bearings

U-Joint Strap Kits

Differential Pinion Shaft Lock Bolts

Differential Bearings

Differential Axle Shafts

Bearing Pullers

Drive Shaft Bearings

Axle Shaft Seals

Drive Shaft Slip Yoke Sleeves

Differential Pinion Pilot Bearings

U-Joint Centering Yokes

Differential Cover Bolts

Differential Carriers

Differential Bearing Kits

Input Shaft Bearings

Front Differential Pinion Bearings

Differential Spider Gear Kits

Differential Rebuild Kits

Differential Carrier Shim Kits

Differential Pinion Seals

Differential Clutch Packs

Rear Axle Shaft Bearings

Differential Ring and Pinions

U-Joint U-Bolt Kits

Differential Cases

Differential End Yokes

Spindle Lock Nuts

Differential Lock Assemblies

Differential Air System Seal Housings

Rear Differential Pinion Bearings

Differential Spools

Differential Carrier Bearings

Differential Pinion Bearing Kits

Complete Differentials

Differential Ring Gear Bolts

Bearing Race Drivers

Differential Carrier Bearing Shims

Input Shaft Seals

Spindle Retainers

Differential Crush Sleeves

Differential Side Bearing Spacers

Differential Pinion Shims

Differential Pinion Shaft Nuts

Differential Gear Install Kits

Differential Cross Pins

Automatic Transmission Differential Carrier Gaskets

Differential Side Gear Thrust Washers

Differential Pinion Bearing Baffles

Differential Pinion Gear Thrust Washers

Oil Pump Housing Seals

Differential Drive Pinion Oil Deflectors

Differential Carrier Bolts

Differential Pinion Gear Washers

Spindle Washers

Limited Slip Differential Assemblies

Differential Clutch Pack Clips

Axle Housing Fill Plugs

Universal Joint Strap Bolts

Differential Lock Thrust Blocks

Essential Drivetrains for 1966 Dodge D200 Series

from

$459.99

Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty. This is a fine spline pinion which takes a 29 spline yoke.

Product Features:

Fits Chrysler 8.75″ “89” case housing
8.75″ ring gear diameter
29 spline pinion
12 ring gear bolts
3.23 ratio

from

$57.99

Product Features:

Crush sleeve eliminator kit for GM 8.5″, 8.6″ and Chrysler 9.25″ rear

from

$181.99

Dana 60 & Dana 70 Power Lok clutch set (steel & fiber).

Product Features:

Clutch kit
Fit Dana Spicer 60, 70, 70U and 70HD Powr Lok positraction

from

$316.99

Yukon 1541H alloy 5 lug rear axle for ’79 and older Chrysler 9.25″ 2WD with a length of 31-11/16″ and 31 splines. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H alloy rear axles come with a one year warranty against manufacturing defects. This is a C-clip axle.

Product Features:

31 spline
5 lug
31 11/16″ long
Fits Chrysler 9.25″ in 1979 and down Dodge 2WD truck

from

$18.99

Product Features:

Bulkhead quit connect fitting

from

$22.79

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$5.99

3/8″ cover bolt, Dana 60, Dana 70 & Dana 80.

Product Features:

Cover bolt for Dana Spicer 60, 70 and 80
3/8″

from

$26.99

Product Features:

Pinion nut
Fits Chrysler 7.25″, 8.0″, 8.25″, 9.25″ and 8.75″ with 29 spline pinion

from

$9.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$829.99

The Spartan Locker, by USA Standard Gear, provides reliable traction at a low cost. Give your vehicle great traction and save some cash. Choose a Spartan Locker for better traction. The Spartan locker by USA standard gear is a mechanical locker that replaces the spiders in a standard case. The Spartan locker’s design does not use the thrust washers and has a revolutionary spring and pin design that makes installation a snap! The couplers and drivers are made from 9310 steel, for added strength. Each Spartan locker carries a one year warranty against defect.

Product Features:

Fits Dana Spicer 60 with 30 spline axles
Made from 9310 steel for added strength
Replaces the spiders in a standard carrier case

from

$111.99

Yukon 1350 to Mechanics 3R adaptor U/joint.

from

$198.99

Product Features:

Spider gear kit
Fits Dana Spicer 60, 35 spline open differential
Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.

from

$5.99

Dana 60 pinion gear Thrust washer, standard Open & TracLoc (also 8.75″ Chrysler STD) Dana 70 2PC.

Product Features:

Pinion gear thrust washer for Dana Spicer 60
Fits standard open and Trac Loc applications

from

$188.99

Yukon yoke for Chrysler 8.75″ with 29 spline pinion and a 7260 U/joint size. 3.125″ snap ring span, 1.078″ cap diameter. Inside snap ring.This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:

Fits Chrysler 8.75″
29 spline
7260 u-joint size
2.125″ snap ring span
1.078″ cap diameter
Inside snap ring design
Strap style

from

$854.99

Differential

from

$21.99

8.75″ Chrysler & 9″ Ford preload shim kit.

Product Features:

Preload shim kit for Ford 9″ and Chrysler 8.75″ with ’41’ and ’42’ case housing

from

$8.99

Positraction clutch guide.

Product Features:

Clutch guide for Chrysler 9.25″, Dana Spicer 44, Dana Spicer 50, Ford 8.8″, GM 12 bolt passenger car, GM 8.2″, 8.5″ and 8.6″, 1963-1979 Corvette and Nissan Titan
Compatible with Dura Grip positractions only

from

$883.99

The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:

Carrier bearing puller
Works with an impact gun to safely and easliy remove carrrier bearings

from

$6.99

This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$59.99

RngPnnInstlKt

from

$279.99

Yukon yoke for Chrysler 9.25″ with a 7290 U/joint size. 2.625″ snap ring span. 1.125″ cap diameter. Inside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:

Fits Chrysler 9.25″ rear
29 spline
7290 u-joint size
2.625″ snap ring span
1.125″ cap diameter
Inside snap ring design
Strap style

from

$596.99

For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!

from

$93.99

Product Features:

Fits Chrysler 9.25″ rear
Steel

from

$37.99

Replacement redi-sleeve yoke saver for 8.75″ c, 9.25″ c, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD .Yukon Mighty seal.

Product Features:

Redi-Sleeve yoke saver
Fits Chrysler 8.75″ and 9.25″ rear, Dana Spicer 60, 70, 70U and 70HD

from

$148.99

Redline Synthetic “Shock Proof” Oil with positraction Additive. 4 Quarts.

Product Features:

Includes four quarts of Redline Shockproof oil and one 4oz bottle of Yukon positraction additive

from

$215.99

Bearing race driver. No return.

Product Features:

Bearing race driver
Fits HM89410 race
All steel construction

from

$11.29

Product Features:

O-ring for seal housing
Fits Dana Spicer 60

from

$22.79

Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 84-88; CHECKER 55-82; CHEV 60-12; DODGE 57-02; FORD 55-10; GMC 63-07; INTL 57-02; ISUZU 96-01; KW 81-18; MACK 80-90; MAZDA 87-94; MITS 87-09; OLDS 90-01; PLYM 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.

Product Features:

MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
For Years: 1955-2018
Weight approx: 3 Lbs
BEARING ID / BORE: 1.3780 INCH / 35 MM
CENTERLINE: 2.28 INCH / 58 MM
MOUNT WIDTH: 6.62 INCH / 168 MM
STYLE: ROUND FRAME
COMPLETE MOUNT

Upgrade your 1966 Dodge D200 Series with Top-Quality Drivetrains

When it comes to maintaining or upgrading your 1966 Dodge D200 Series, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Dodge or enhancing its overall performance, Drivetrains are key to keeping your D200 Series functioning at its best. At Advance Auto Parts, we offer a wide selection of 310 Drivetrains for the 1966 Dodge D200 Series, designed to meet your needs without breaking the bank. From Spindle replacements to Universal Joints upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Drivetrains for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Drivetrains for your 1966 Dodge D200 Series at great prices. Our Drivetrains inventory for this model ranges from just $1.49 to $1,566.99, with an average price of $235.17. Our 310 Drivetrains in stock come from 14 trusted brands, so you’re sure to find the right part for your 1966 Dodge D200 Series without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1966 Dodge D200 Series, we stock popular OEM and aftermarket Drivetrains from top names like National Anchor, and more. National Drivetrains start at just $8.99 and boast an impressive 4 stars average rating from customers. With 268 customer reviews and counting, our 1966 Dodge D200 Series Drivetrains have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Drivetrain upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1966 Dodge D200 Series is always ready to roll. We’re committed to providing you with everything you need to keep your D200 Series in top shape, all in one place. Start shopping confidently below for your 1966 Dodge D200 Series!

Best-Selling Spindles for 1966 Dodge D200 Series

Enhance the driving experience in your Dodge with 8 quality Spindle components, starting at $5.99.

show more show less

from

$8.99

Spindle nut retainer, 2.030″ I.D., 8 bent over tabs. This replaces Spicer part number 33733.

Product Features:

Spindle nut retainer for Dana Spicer 60, 70, 70U and 70HD
2.030″ I.D.
8 bent over tabs

from

$29.99

Product Features:

Locking key/wedge
Fits Dana Spicer 60 and 70

from

$5.99

This spindle nut washer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this spindle nut washer matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$26.99

Spindle nut for Dana 60 & 70, 1.940″ I.D., with plastic ring. This replaces Spicer part number 39695.

Product Features:

Spindle nut
Fits Dana Spicer 60 and 70
1.940″ I.D.
Has plastic inner ring

from

$10.99

Spindle nut retainer for Dana 60 & 70, 1.830″ I.D., 10 outer tabs. This replaces Spicer part number 30637.

Product Features:

Spindle nut retainer for Dana Spicer 60, 70, 70U and 70HD
1.830″ I.D.
10 outer tabs

from

$27.99

Spindle nut, 2.065″ I.D., six slots. This replaces Spicer part number 36635.

Product Features:

Spindle nut
6 slots
2.065″ I.D.

from

$15.99

Spindle nut for Dana 60, 1.750″ I.D., 6 sided. This replaces Spicer part number 30636.

Product Features:

Spindle nut
Fits Dana Spicer 60
6 sides
1.750″ I.D.

from

$7.29

Direct replacement – this spindle nut washer matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Most Popular 1966 Dodge D200 Series Universal Joints

Customize your Dodge with 38 Universal Joints products like U-Joints, U-Joint Strap Kits, and U-Joint U-Bolt Kits, all priced under $213.99.

show more show less

from

$15.99

DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).

Product Features:

The cross is hot forged for the higher torque and horsepower
The bearing cups are made by cold forging, having higher strength and better rigidity
Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
Snap rings are held to strict tolerances to ensure proper cup position and retention
Nitrile rubber seals to optimize grease retention and reduce contamination

from

$15.99

The cross is hot forged for the higher torque and horsepower
The bearing cups are made by cold forging, having higher strength and better rigidity
Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
Snap rings are held to strict tolerances to ensure proper cup position and retention
Nitrile rubber seals to optimize grease retention and reduce contamination

from

$37.99

Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
CORROSION PROTECTION — Exclusive MICRO SHIELDΓ┐ó coating protects against rust and corrosion
GREASABLE DESIGN — Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability

from

$38.99

BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
CORROSION PROTECTION — Exclusive MICRO SHIELDΓ┐ó coating protects against rust and corrosion
GREASABLE DESIGN — Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability

from

$26.99

Backed by superior materials and rigorous testing, MOOG Premium universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
GREASABLE DESIGN — Greasable u-joints allow for new grease to flush out contaminants and moisture
KEEPS DIRT OUT — Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
Cross forging shape and flash provide easier installation and high strength

from

$14.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

For U-Joints 315G, 317, 319 & 457
Contains two 1-1/2″ bolt center clamps and four 1/4-28 x 5/8″ cap screws

from

$29.99

Backed by superior materials and rigorous testing, MOOG Super Strength® universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
CORROSION PROTECTION — Exclusive MICRO SHIELD coating protects against rust and corrosion
STRONG AND DURABLE — Cold-forged, case-hardened and precision-ground alloy steel crosses for durability
KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$25.99

COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
GREASABLE DESIGN — Greasable u-joints allow for new grease to flush out contaminants and moisture
KEEPS DIRT OUT — Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
Cross forging shape and flash provide easier installation and high strength

from

$28.99

COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
GREASABLE DESIGN — Greasable u-joints allow for new grease to flush out contaminants and moisture
KEEPS DIRT OUT — Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
Cross forging shape and flash provide easier installation and high strength

from

$39.99

When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.

from

$10.99

For U-Joints 316 & 458
Contains two 1.54″ bolt center clamps and four 1/4-28 x 5/8″ cap screws

from

$42.99

from

$59.99

Yukon 1310 to 1330 adapter U/Joint. The 1310 side has a 3.219″ span and 1.062″ caps. The 1330 side has a 3.625″ span and 1.062″ caps. Both sides are outside snap ring.

from

$34.99

1310 U-bolts, 5/16″ x 1-3/8″ Dana 30, Dana 44, 8.2″, 12P, 12T, VET, Model 20.

Product Features:

u-joint u-bolt kit
Fits AMC Model 20, Dana Spicer 30 and 44, GM 8.2″, 12 bolt passenger car and truck and 1963-1979 Corvette
1310 u-joint size
Includes two u-bolts and four nuts

from

$16.99

1350 & 1410 U/joint U-bolts, 3/8″ X 1-11/16″, kit.

Product Features:

u-joint u-bolt kit
Fits 1350 and 1410 u-joint size
Includes two u-bolts and four nuts

from

$78.99

Yukon 1350 to 1410 conversion u/joint.

from

$109.99

Yukon 1310 to Mechanics 3R adapter U/Joint.

from

$63.99

Yukon 1350 Lifetime Series U/Joint. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring.

from

$61.99

Yukon 1330 Dual-size cap U/Joint. 3.625″ snap ring span. One set of caps is 1.125″ in diameter and the other is 1.062″. Outside snap ring.

from

$52.99

7290 U/joint strap kit (4 bolts and 2 straps) for Chrysler 7.25″, 8.25″, 8.75″, and 9.25″.

Product Features:

u-joint strap kit
Fits Chrysler 7.25″, 8.25″ 8.75″ and 9.25″ rear
7290 u-joint size
Includes two straps and four bolts

from

$51.99

Yukon 1350 U/Joint with zerk fitting. 3.625″ snap ring span, 1.118″ cap diameter. Outside snap ring.

from

$53.99

1330 Yukon Lifetime U/Joint. 3.625″ snap ring span, 1.062″ cap diameter. Outside snap ring.

from

$51.99

Yukon 1330 U/Joint with zerk fitting. 3.625″ snap ring span, 1.062″ cap diameter. Outside snap ring.

from

$57.99

1310 Yukon Lifetime U/joint. 1.718″ snap ring span, 1.062″ cap diameter. Inside snap ring.

from

$213.99

Yukon yoke for Chrysler 8.75″ with 10 spline pinion and a 7260 U/joint size. 2.125″ snap ring span, 1.078″ cap diameter. Inside snap ring.This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:

Fits Chrysler 8.75″
10 spline
7260 u-joint size
Inside snap ring design
2.125″ snap ring span
1.078″ cap diameter
Strap style

from

$203.99

Yukon replacement yoke for Dana 44-HD, 60, and 70 with a 1310 U/joint size. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring. This yoke uses u-bolts. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:

Fits Dana Spicer 60, 70, 70U and 70HD
29 spline
1310 u-joint size
3.219″ snap ring span
1.062″ cap diameter
Outside snap ring design
U-bolt style

from

$188.99

Fits Chrysler 8.75″
29 spline
7260 u-joint size
2.125″ snap ring span
1.078″ cap diameter
Inside snap ring design
Strap style

from

$111.99

Yukon 1350 to Mechanics 3R adaptor U/joint.

from

$84.99

Yukon 1410 Lifetime Series U/Joint. 4.188″ span ring span. 1.188″ cap diameter. Outside snap ring.

from

$61.99

Yukon 1410 U/Joint with zerk fitting. 4.188″ snap ring span, 1.118″ cap diameter. Outside snap ring.

from

$49.99

7260 U/joint strap, Small Chrysler w/ bolts, 7.25, 8.25, 8.75, 9.25.

Product Features:

u-joint strap kit
Fits Chrysler 7.25″, 8.25″ 8.75″ and 9.25″ rear
7260 u-joint size
Includes two straps and four bolts

from

$46.99

Universal Joint

from

$37.99

SPICER U-JOINT

from

$31.99

Strap kit for 1480 yoke in Dana 60, Dana 70, & Dana 80.

Product Features:

u-joint strap kit
Fits Dana Spicer 60, 70, 70U, 70HD and 80
1480 u-joint size
Includes two straps and four bolts

from

$17.99

U/joint strap kit, 10.25″, 9.5″, Dana 60, Dana 70, 1350 & 1410.

Product Features:

u-joint strap kit
Fits Ford 10.25″, GM 9.5″, Dana Spicer 60, 70, 70U and 70HD
1350 and 1410 u-joint size
Includes two straps and four bolts

from

$15.99

1330 U/joint U-bolts, 5/16″ X 1-9/16″, (7260 & 7290 BILLET).

Product Features:

u-joint u-bolt kit
Fits AMC Model 20, Dana Spicer 30 and 44, GM 8.2″, 12 bolt passenger car and truck and 1963-1979 Corvette
1330 u-joint size
Includes two u-bolts and four nuts

from

$10.99

7290 U-joint strap bolt (one bolt only) for Chrysler 7.25″, 8.25″, 8.75″, 9.25″.

Product Features:

U-Joint strap bolt
Fits Chrysler 7.25″, 8.25″, 8.75″ and 9.25″
7290 u-joint size

from

$3.99

Universal Joint

Top Picks for 1966 Dodge D200 Series Transfer Cases

Upgrade Dodge D200 Series with top-quality Transfer Cases parts, including 4 OEM and aftermarket selections for your 1966 model.

show more show less

from

$16.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$24.99

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$1.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$10.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

In-Demand Drive Shafts and Axles for 1966 Dodge D200 Series

Select from 21 premium Drive Shafts and Axles parts for your 1966 Dodge D200 Series, with prices ranging from $7.99 to $883.99.

show more show less

from

$34.49

Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 84-88; CHEV 60-02; DODGE 57-02; FORD 55-07; GMC 63-02; INTL 57-02; KW 81-18; MACK 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.

Product Features:

MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
For Years: 1955-2018
Weight approx: 4 Lbs
BEARING ID / BORE: 1.5750 INCH / 40 MM
CENTERLINE: 2.48 INCH / 63 MM
MOUNT WIDTH: 6.62 INCH / 168 MM
STYLE: ROUND FRAME
NOT PICTURED: TWO DUST SHIELDS

from

$16.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$44.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Controlled heat treating process for lasting performance and extended bearing life
Industry leading coverage
Professional technicians know they can depend on National

from

$22.79

MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
For Years: 1955-2018
Weight approx: 3 Lbs
BEARING ID / BORE: 1.3780 INCH / 35 MM
CENTERLINE: 2.28 INCH / 58 MM
MOUNT WIDTH: 6.62 INCH / 168 MM
STYLE: ROUND FRAME
COMPLETE MOUNT

from

$117.99

Product Features:

PINION YOKE
CAST:1310
U-BOLT STYLE

from

$8.99

8.75″ Chrysler inner axle seal, use w/set7.Yukon Mighty seal.

Product Features:

Rear inner axle seal
Fits Chrysler 8.75″ rear
Tapered rolling bearing design only

from

$15.99

8.75″ Chrysler outer axle seal, use w/set7.Yukon Mighty seal.

Product Features:

Rear outer axle seal
Fits Chrysler 8.75″ rear
Tapered rolling bearing design only

from

$22.79

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$55.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Controlled heat treating process for lasting performance and extended bearing life
Industry leading coverage
Professional technicians know they can depend on National

from

$7.99

Product Features:

Pinion yoke dust shield
Fits Dana Spicer 60 and 70

from

$883.99

Carrier bearing puller
Works with an impact gun to safely and easliy remove carrrier bearings

from

$32.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Controlled heat treating process for lasting performance and extended bearing life
Industry leading coverage
Professional technicians know they can depend on National

from

$9.99

Yukon 4340 Chrome-Moly axles provide up to 50% increased strength over stock axles for use in extreme performance applications with large tires and high horsepower. Yukon’s 4340 axles are manufactured using the latest technologies and the highest quality

Product Features:

Fill plug
Fits Chrysler 8.75″

from

$233.99

Yukon replacement yoke for Dana 44-HD, 60, and 70 with a 1310 U/joint size. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring. This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:

Fits Dana Spicer 60 and 70
29 spline
1310 u-joint size
Outside snap ring design
3.219″ snap ring span
1.062″ cap diameter
Strap style

from

$219.99

Yukon replacement yoke for Dana 60 and 70 with a 1350 U/joint size. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. This yoke uses u-bolts. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:

Fits Dana Spicer 60, 70, 70U and 70HD
29 spline
1350 u-joint size
3.625″ snap ring span
1.188″ cap diameter
Outside snap ring design
U-bolt style

from

$209.99

Yukon extra HD yoke for Chrysler 8.75″ with 29 spline pinion and a 1350 U/joint size. 3.625″ snap ring span, 1.118″ cap diameter. Outside snap ring. This yoke uses u-bolts. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:

Fits Chrysler 8.75″
29 spline
1350 u-joint size
Outside snap ring design
3.625″ snap ring span
1.188″ cap diameter
U-bolt style

from

$187.99

Yukon replacement yoke for Dana 60 and 70 with a 1330 U/joint size. 3.625″ snap ring span, 1.0625″ cap diameter. Outside snap ring. This yoke uses u-bolts. All Yukon yokes come with a one year warranty against manufacturing defects. This is a strap style yoke.

Product Features:

Fits Dana Spicer 60, 70, 70U and 70HD
29 spline
1330 u-joint size
3.625″ snap ring span
1.062″ cap diameter
Outside snap ring design
Strap style

from

$179.99

Yukon replacement yoke for Dana 60 and 70 with a 1350 U/joint size. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:

Fits Dana Spicer 60, 70, 70U and 70HD
29 spline
1350 u-joint size
3.625″ snap ring span
1.188″ cap diameter
Outside snap ring design
Strap style

from

$110.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Controlled heat treating process for lasting performance and extended bearing life
Industry leading coverage
Professional technicians know they can depend on National

from

$50.99

Center Support Bearing

from

$49.99

Center Support Bearing

Most Sold 1966 Dodge D200 Series Differentials

Explore our best-selling Dodge parts for the 1966 D200 Series among 239 OEM and aftermarket options starting from $3.99.

show more show less

from

$17.49

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$38.49

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$6.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$8.49

Product Features:

Brand may vary by location

from

$9.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$245.99

Product Features:

DANA-70 R/P 4.10 STD MG 72154-5X .625″ OFFSET

from

$20.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Controlled heat treating process for lasting performance and extended bearing life
Industry leading coverage
Professional technicians know they can depend on National

from

$57.99

3 Qt. Penzoil 80W90 conventional gear Oil. W/ bottle of Posi additive.

Product Features:

Includes three quarts of conventional oil and one 4oz bottle of Yukon positraction additive

from

$8.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$5.99

3/8″ cover bolt, Dana 60, Dana 70 & Dana 80.

Product Features:

Cover bolt for Dana Spicer 60, 70 and 80
3/8″

from

$4.99

Replacement ring gear bolt for Dana 60, 70, 70U & 70HD, 1/2″ x 18.

Product Features:

Ring gear bolt for Dana Spicer 60, 70, 70U and 70HD
1/2″ x 18 thread

from

$8.99

Product Features:

Clutch guide for Chrysler 9.25″, Dana Spicer 44 and Dana Spicer 60
For Trac Loc positraction applications only

from

$37.99

Replacement redi-sleeve yoke saver for 8.75″ c, 9.25″ c, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD .Yukon Mighty seal.

Product Features:

Redi-Sleeve yoke saver
Fits Chrysler 8.75″ and 9.25″ rear, Dana Spicer 60, 70, 70U and 70HD

from

$13.99

Product Features:

Carrier shim kit for Dana Spicer 60, 70, 70HD, 70U and 80

from

$8.99

Ring gear bolt for Chrysler 7.25″, 8″ IFS, 8.25″, 8.75″ & GM 7.2″ IFS front. 3/8″ x 24.

Product Features:

Ring gear bolt for Chrysler 7.25″, 8.0″ IFS and 8.75″
3/8″ x 24 thread
.866″ long

from

$11.49

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$148.99

Redline Synthetic “Shock Proof” Oil with positraction Additive. 4 Quarts.

Product Features:

Includes four quarts of Redline Shockproof oil and one 4oz bottle of Yukon positraction additive

from

$10.99

Pinion nut for Chrysler 7.25″, 8.0″ IFS, 8.25″, 8.75″ fine spline, 9.25″ front & rear, 7/16″ x 14.

Product Features:

Pinion nut for Chrysler 8.0″ IFS, 8.25″, 8.75″ with 29 spline pinion and 9.25″ rear
7/8″ x 14 thread

from

$6.49

Product Features:

DANA PRELOAD SHIMS (D60 & D70)

from

$21.99

8.75″ Chrysler & 9″ Ford preload shim kit.

Product Features:

Preload shim kit for Ford 9″ and Chrysler 8.75″ with ’41’ and ’42’ case housing

from

$19.99

Product Features:

Pinion preload shims for Dana Spicer 60 and 70U

from

$99.99

Redline Synthetic “Shock Proof” Oil. 3 Quarts.

Product Features:

Includes three quarts of Redline Shockproof oil

from

$26.99

Product Features:

Pinion nut
Fits Chrysler 7.25″, 8.0″, 8.25″, 9.25″ and 8.75″ with 29 spline pinion

from

$12.99

8.75″ Chrysler gasket.

Product Features:

Dropout gasket
Fits Chrysler 8.75″

from

$137.99

Redline Synthetic “Shock Proof” Oil. 4 Quarts.

Product Features:

Includes four quarts of Redline Shockproof oil

from

$13.99

Product Features:

PINION SHIM – DANA 70 ALL

from

$79.99

Seal housing for Dana 60, Zip locker, with o-rings.

Product Features:

Seal housing for Dana Spicer 60
Includes o-rings

from

$18.99

Product Features:

CARRIER SHIM-DANA 60 & 70

from

$20.29

Product Features:

Brand may vary by location

from

$15.99

Bolt/screw for adjuster lock for Chrysler 7.25″, 8.25″, 8.75″, 9.25″.

Product Features:

Side adjuster lock bolt
Fits Chrysler 7.25″, 8.25″, 8.75″ and 9.25″

from

$9.99

Product Features:

Inner oil slinger for Dana Spicer 60

from

$7.99

Dana 50 Dana 60 Dana 70 & Dana 80 roll PIN, 0.225″ DIA, for X/P shaft, 1.87″ LNG.

Product Features:

Roll pin for Dana Spicer 50, 60, 70, 70U, 70HD and 80
0.225″ diameter
1.870″ long

from

$5.99

Product Features:

Outer oil slinger for Dana Spicer 60, 70, 70U and 70HD

from

$4.99

Product Features:

Side gear thrust washer for Dana Spicer 60, 70, 70U, 70HD and 80
Fits standard open differentials only

from

$339.99

USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

Product Features:

Fits Dana Spicer 60 front
Uses Koyo bearings and races
Included are carrier bearings and races, pinion bearings and races, pinion seal, axle seals, complete shim kit, ring gear bolts, pinion nut, crush sleeve, oil baffles and slingers, thread locker, marking compound with brush and gasket.

from

$156.99

Yukon yoke for Chrysler 8.75″ with 29 spline pinion and a 7290 U/joint size. 2.625″ snap ring span. 1.125″ cap diameter. Inside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:

Fits Chrysler 8.75″
29 spline
7290 u-joint size
2.625″ snap ring span
1.125″ cap diameter
Inside snap ring design
Strap style

from

$156.99

Dana 60 & Dana 70 Power Lok cross pin shaft (TWO needed).

Product Features:

Cross pin shaft
Fits Dana Spicer 60 and 70
Powr Lok positraction only

from

$52.99

Air line repair kit, ZIP locker.

Product Features:

Air line repair kit
Includes 20′ air line and two repair fittings

from

$39.99

8″ Toyota, 7.5″ GM, 8.2″ GM, 12T, pinion shim set, & Mazda truck.

Product Features:

Pinion depth shim kit for Toyota 7.5″, 8″ and V6

from

$36.99

Product Features:

Belleville plate, splined
Fits Dana Spicer 44 Powr Lok

from

$26.49

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$596.99

from

$414.99

Yukon Performance steel spool for Dana 60 with 35 spline axles. fits 4.10 and down. Yukon performance spools are made from the highest quality materials to ensure high strength and long life in performance applications. Spools provide 100% power to both tires at all times and are a lower cost alternative to lockers. Spools are not recommended for street driven vehicles. Yukon Performance spools come with a one year warranty against manufacturing defects.

Product Features:

Fits Chrysler Dana Spicer 60 with 35 spline axles
4.10 and down ratio only
Provides 100% traction to both wheels at all times
Not recommended for street driven vehicles

from

$249.99

This differential ring and pinion directly replaces the original equipment on specific vehicle years, makes and models.

Product Features:

Direct replacement – this ring and pinion set matches the fit and function of the original components on certain vehicle applications.
Effective fix – eliminates grinding and whining from failed original bearings.
Thoroughly tested – vehicle try-on testing and rigorous quality control measures ensure longevity
Trustworthy quality – backed by team of designers and engineers in the United States

from

$251.99

Yukon replacement trail repair kit for Dana 60 with 1310 size U/joint and u-bolts. This kit comes with a yoke, U/joint, pinion seal, U/bolt or strap kit, pinion nut, and pinion nut washer (if applicable).

Product Features:

Fits Dana Spicer 60 and 70
1310 u-joint size
Kit includes yoke, U-joint, pinion seal, pinion nut and washer, U-bolts and threadlocker

from

$198.99

Product Features:

Spider gear kit
Fits Dana Spicer 60, 35 spline open differential
Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.

from

$177.99

Product Features:

Clutch kit
Fit Dana Spicer 44 and Chrysler 8.75″ Powr Lok positraction
Smooth design

from

$104.99

Product Features:

Carrier shims for Dana Spicer 60 and 70U

Top-Rated Drivetrains Brands For Your 1966 Dodge D200 Series

Shop for the best-rated brands offering Drivetrains and other products for your 1966 Dodge D200 Series. Below you’ll find some of our best rated Drivetrains from National and Anchor, and more. Drivetrains from these brands that fit a 1966 D200 Series start at just $8.99 and are rated as high as 4 stars. OEM and aftermarket Drivetrains don’t get more top quality, durable, and affordable than from the brands below.

Popular National 1966 Dodge D200 Series Drivetrains

When it comes to maintaining or upgrading your 1966 Dodge D200 Series, using quality Drivetrains is essential to ensure durability and a perfect fit. National ticks all of those boxes. We offer a wide selection of National Drivetrains, specifically designed for the 1966 Dodge D200 Series. With over 16 National brand Drivetrains in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $8.99, with an average price of just $29.48. Plus, with over 94 customer reviews and an average rating of 4 stars, you can trust that our National Drivetrains will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$11.49

This product is not rated

Bearings

“”

from
$8.99

This product is not rated

Bearings

“”

from
$22.79

This product is not rated

Bearings

“”

Popular Anchor 1966 Dodge D200 Series Drivetrains

Anchor auto parts is one of the highest quality Drivetrain brands in the market. Any 1966 Dodge D200 Series owner should feel confident when installing genuine Anchor parts in their vehicle. To ensure the best fit and performance for your 1966 D200 Series, Advance Auto Parts carries a full inventory of 2 Anchor Drivetrains. Plus you will be keeping your Dodge in peak condition while saving money because prices on these Anchor Drivetrains range from $22.79 to $34.49, plus, with more than 14 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Drivetrains below will deliver on both quality and value.

from
$34.49

(1)

Center Support Bearing Motor Mount: Center, 1 Piece

“to high”

from
$22.79

(13)

Center Support Bearing Motor Mount: Center, 1 Piece

“to high”

FAQs for 1966 Dodge D200 Series Drivetrains

Which Drivetrains are best-sellers for 1966 Dodge D200 Series?

Out of 310 Drivetrains that fit 1966 Dodge D200 Series, the following parts are the top sellers:

Center Support Bearing Motor Mount: Center, 1 Piece (5300924) – $22.79
3 Qt – 80W90 Conventional Gear Oil With Posi Additive (11645418) – $57.99
Bearings (3272400) – $9.99

What’s the price range for 1966 Dodge D200 Series Drivetrains?

Drivetrain prices for the 1966 Dodge D200 Series start at $1.49 and go up to $1,566.99 for the most premium parts.

What’s the average price of a Drivetrain for a 1966 Dodge D200 Series?

The average price for Drivetrains for the 1966 Dodge D200 Series is $235.17. Keep in mind the variety of part types within our Drivetrain category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Drivetrains for other Dodge D200 Series model years?

Yes, we currently carry Drivetrains for 7 model years of Dodge D200 Series between 1960 and 1967. Drivetrains are bought most frequently for the following model years: 1967, 1965, 1964, 1963, 1962, 1961, and 1960.

What are the cheapest Drivetrains for my 1966 Dodge D200 Series?

The cheapest 1966 Dodge D200 Series Drivetrains we carry in stock are:

Engine Oil Pump Cover Seal (3203417) – $1.49
Dana 44 JK / 60 / 70U Pinion Nut Washer Replacement (11643194) – $3.99
Universal Joint (5270200) – $3.99
Replacement Ring Gear Bolt For Dana 60, 70, 70U & 70HD, 1/2" X 18 (11643357) – $4.99
Side Gear Thrust Washer For Dana 60, 70 & 80 (11642996) – $4.99

What are the top-rated Drivetrains that fit the 1966 Dodge D200 Series?

Out of 268 reviews by customers, our 1966 Dodge D200 Series Drivetrains have an average customer rating of . These are some of the highest-rated Drivetrain types for the 1966 Dodge D200 Series and their top-rated products:

Universal Joints
- Universal Joint (10265723) – $15.99
- Greaseable Super Strength Universal Joint (10087213) – $38.99
- Universal Joint Strap Kit (10086992) – $14.99
Differentials
- Universal Joint (10265723) – $15.99
- Greaseable Super Strength Universal Joint (10087213) – $38.99
- Universal Joint Strap Kit (10086992) – $14.99

What types of Drivetrains do you sell for my 1966 Dodge D200 Series?

As of 2/5/25, these are some of the most in-demand types of Drivetrains for a 1966 Dodge D200 Series:

Can I get help with 1966 Dodge D200 Series Drivetrain orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Dodge Drivetrains and more.

What is your return policy for Dodge D200 Series Drivetrains?

Advance Auto Parts keeps returns simple. For new Dodge D200 Series Drivetrains and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1966 Dodge D200 Series Drivetrains

Yukon Gear – High Performance Ring & Pinion Gear Set For Chrysler 8.75" With 89 Housing In A 3.23 Ratio (Part No.24238)

Yukon Gear – Crush Sleeve Eliminator Kit For GM 8.5" & Chrysler 9.25" (Part No.55048)

Yukon Gear – Dana 60 & Dana 70 Power Lok Clutch Set (Steel & Fiber) (Part No.16155)

Yukon Gear – 1541H Alloy 5 Lug Rear Axle For ’79 And Older Chrysler 9.25" 2WD (Part No.21016)

Yukon Gear – Zip Locker Bulkhead Quick-Disconnect Fitting (Part No.34038)

National – Bearings (Part No.354A)

Yukon Gear – Dana 60, Dana 70 & Dana 80 Cover Bolt (Part No.33235)

Yukon Gear – Chrysler Fine Spline Pinion Nut For Chrysler 7.25", 8", 8.25", 8.75", And 9.25" (Part No.33253)

National – Bearings (Part No.15245)

USA Standard Gear – Spartan Locker For Dana Spicer 60 With 30 Spline Axles, Includes Heavy-Duty Cross Pin Shaft (Part No.17003)

Yukon Gear – 1350 To Mechanics 3R Adaptor U/Joint (Part No.42001)

USA Standard Gear – Replacement Spider Gear Set For Dana 60, 35 Spline (Part No.39009)

Yukon Gear – Dana 60 Pinion Gear Thrust Washer, Standard Open & Tracloc (Also 8.75" Chrysler Std) Dana 70 2Pc (Part No.33287)

Yukon Gear – Yoke For Chrysler 8.75" With 29 Spline Pinion And A 7260 U/Joint Size (Part No.41007)

Yukon Gear – Differential (Part No.26037)

Yukon Gear – Preload Shim Kit For Chrysler 8.75" & Ford 9" (Part No.55030)

Yukon Gear – Positraction Clutch Guide (Part No.33352)

Yukon Gear – The Carrier Bearing Puller (Part No.56072)

Dorman – Spindle Nut 3/4 In.-16 Hex 1-1/16 In. (sold by each) (Part No.615-016)

Richmond Gear – RngPnnInstlKt (Part No.83-1034-B)

Yukon Gear – Yoke For Chrysler 9.25" With A 7290 U/Joint Size (Part No.41002)

Powertrax – Grip PRO Traction System (Part No.GT436035)

Yukon Gear – Steel Cover For Chrysler 9.25" Rear (Part No.32314)

Yukon Gear – Redi-Sleeve Yoke Saver For 8.75" C, 9.25" C, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD (Part No.30228)

Yukon Gear – Redline Synthetic "Shock Proof" Oil With Positraction Additive – 4 Quarts (Part No.15005)

Yukon Gear – Bearing Race Driver (Part No.56017)

Yukon Gear – O-Ring For Dana 60 Zip Locker Seal Housing (Part No.34006)

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6056)

Yukon Gear – Spindle Nut Retainer, 2.030" I.D., 8 Bent Over TABS (Part No.33480)

Yukon Gear – Locking Key / Wedge For Dana 60 & 70 Spindle Nut (Part No.33512)

Dorman – Spindle Washer – I.D. 2 In.-3/8 In. O.D. 2-3/8 In. Thickness 1/16 In. (Part No.618-050.1)

Yukon Gear – Spindle Nut For Dana 60 & 70, 1.940" I.D., With Plastic Ring (Part No.33486)

Yukon Gear – Spindle Nut Retainer For Dana 60 & 70, 1.830" I.D., 10 Outer TABS (Part No.33477)

Yukon Gear – Spindle Nut, 2.065" I.D., Six Slots (Part No.33484)

Yukon Gear – Spindle Nut For Dana 60, 1.750" I.D., 6 Sided (Part No.33476)

Dorman – Spindle Washer – I.D. 2 In.-3/8 In. O.D. 2-3/8 In. Thickness 1/16 In. (sold by each) (Part No.618-050)

Driveworks – Universal Joint (Part No.DW-316)

Driveworks – Universal Joint (Part No.DW-315G)

MOOG Driveline Products – Greaseable Super Strength Universal Joint (Part No.246)

MOOG Driveline Products – Greaseable Super Strength Universal Joint (Part No.248)

MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.317)

MOOG Driveline Products – Universal Joint Strap Kit (Part No.318-10)

MOOG Driveline Products – Non-Greaseable Super Strength Universal Joint (Part No.245)

MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.316)

MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.315G)

Spicer – Universal Joint (Part No.5-811X)

MOOG Driveline Products – Universal Joint Strap Kit (Part No.316-10)

Spicer – Universal Joint (Part No.5-789X)

Yukon Gear – 1310 To 1330 Adapter U/Joint (Part No.42005)

Yukon Gear – Dana 44, 8.2", 12P, 12T, Vet, And Model 20 U-Bolts (Part No.41198)

Yukon Gear – 1350 & 1410 U/Joint U-Bolts, 3/8" X 1-11/16", Kit (Part No.41190)

Yukon Gear – 1350 To 1410 Conversion U/Joint (Part No.42006)

Yukon Gear – 1310 To Mechanics 3R Adapter U/Joint (Part No.42013)

Yukon Gear – 1350 Lifetime Series U/Joint (Part No.42021)

Yukon Gear – 1330 Dual-Size Cap U/Joint (Part No.42017)

Yukon Gear – 7290 U/Joint Strap Kit (4 Bolts And 2 Straps) For Chrysler 7.25", 8.25", 8.75", And 9.25" (Part No.41013)

Yukon Gear – 1350 U/Joint With Zerk Fitting (Part No.42010)

Yukon Gear – 1330 Lifetime U/Joint (Part No.42004)

Yukon Gear – 1330 U/Joint With Zerk Fitting (Part No.42002)

Yukon Gear – 1310 Lifetime U/Joint (Part No.42003)

Yukon Gear – Yoke For Chrysler 8.75" With 10 Spline Pinion And A 7260 U/Joint Size (Part No.41006)

Yukon Gear – Replacement Yoke For Dana 44-HD, 60, And 70 With A 1310 U/Joint Size (Part No.41023)

Yukon Gear – Yoke For Chrysler 8.75" With 29 Spline Pinion And A 7260 U/Joint Size (Part No.41007)

Yukon Gear – 1350 To Mechanics 3R Adaptor U/Joint (Part No.42001)

Yukon Gear – 1410 Lifetime Series U/Joint (Part No.42022)

Yukon Gear – 1410 U/Joint With Zerk Fitting (Part No.42009)

Yukon Gear – 7260 U/Joint Strap, Small Chrysler With Bolts, 7.25, 8.25, 8.75, 9.25 (Part No.41192)

Spicer – Universal Joint (Part No.5-3228X)

Spicer – SPICER U-JOINT (Part No.5-1309X)

Yukon Gear – Dana 60, Dana 70, And Dana 80 Strap Kit (Part No.41194)

Yukon Gear – Dana 60, Dana 70, 1350, 1410, 10.25", And 9.5" U-Joint Strap Kit (Part No.41193)

Yukon Gear – 1330 U/Joint U-Bolts, 5/16" X 1-9/16", (7260 & 7290 Billet) (Part No.41199)

Yukon Gear – 7290 U-Joint Strap Bolt (One Bolt Only) For Chrysler 7.25", 8.25", 8.75", 9.25" (Part No.33246)

Neapco – Universal Joint (Part No.1-6301)

National – Bearings (Part No.15101)

National – Shaft Repair Sleeve (Part No.99125)

Felpro – Engine Oil Pump Cover Seal (Part No.13338)

National – Multi Purpose Seal (Part No.470898)

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6038)