1966 Dodge D100 Series Differentials

Essential 1966 Dodge D100 Series Differentials

Yukon Gear – Replacement Clutch Set For Dana 44 Powr Lok, Smooth (Part No.16152)

Replacement Clutch Set For Dana 44 Powr Lok, Smooth

from

$177.99
Product Features:
  • Clutch kit
  • Fit Dana Spicer 44 and Chrysler 8.75″ Powr Lok positraction
  • Smooth design
See More

Yukon Gear – Chrysler 8.75" (Coarse Spline) Pinion Nut Washer (Part No.33162)

Chrysler 8.75" (Coarse Spline) Pinion Nut Washer

from

$9.99
Chrysler 8.75″ (coarse spline) pinion nut washer.

Product Features:
  • Pinion nut washer
  • Fits Chrysler 8.75″ with 10 spline pinion
See More

Motive Gear – Differential Bearing Kit – Timken (Part No.R8.75ERT)

Differential Bearing Kit - Timken

from

$131.99
Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

Product Features:
  • KIT BRG & SEAL CHRYS. 1.75″ PINION
See More

Powertrax – Lock Right Locker (Part No.1240-LR)

Lock Right Locker

from

$456.99
The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    Felpro – Differential Carrier Gasket (Part No.RDS 6583)

    Differential Carrier Gasket

    from

    $6.49
    Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

    Product Features:
    • Meets or exceeds all original equipment specifications
    • Application specific design to ensure a perfect fit
    • Unsurpassed quality you can trust
    • Validated for fit, form and function
    • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
    See More

    Yukon Gear – Steel Spool For Chrysler 8.75" With 30 Spline Axles (Part No.32040)

    Steel Spool For Chrysler 8.75" With 30 Spline Axles

    from

    $264.99
    Yukon Performance 2-1/16″ deck steel spool for 8.75″ Chrysler with 30 spline axles. Spool uses 2.050″ journal bearings (LM104949/12). Yukon performance spools are made from the highest quality materials to ensure high strength and long life in performance applications. Spools provide 100% power to both tires at all times and are a lower cost alternative to lockers. Spools are not recommended for street driven vehicles. Yukon Performance spools come with a one year warranty against manufacturing defects.

    Product Features:
    • Fits Chrysler 8.75″ with 30 spline axles
    • Provides 100% traction to both wheels at all times
    • Not recommended for street driven vehicles
    See More

    Dorman – Differential Pinion Yoke Assembly (Part No.697-528)

    Differential Pinion Yoke Assembly

    from

    $136.99
    Worn or damaged differential end yoke causing driveline vibrations? This direct replacement end yoke matches the original equipment part for a trustworthy repair and reliable performance.

    Product Features:
    • Direct replacement – this differential end yoke matches the fit and construction of the original yoke
    • Excellent value – this replacement end yoke offers original equipment quality at a fraction of the price of dealer parts
    • Quality materials – this end yoke is machined from cast iron for strength and is precision machined for reliability
    • Validated fit – this differential end yoke has been tested to confirm accurate fit
    See More

    Motive Gear – Ring Gear Bolt (Part No.1304)

    Ring Gear Bolt

    from

    $7.99


    Product Features:
    • CHRY 8 3/4″ RING GEAR BOLTS C 8.25″
    See More

    Yukon Gear – Replacement Floater Roll Pin For Dana 44 & 8.75" Chrysler Power Lok (Part No.33326)

    Replacement Floater Roll Pin For Dana 44 & 8.75" Chrysler Power Lok

    from

    $5.99
    Product Features:
    • Floater roll pin
    • Fits Dana Spicer 44 and Chrysler 8.75″
    • Powr Lok positraction only
    See More

    USA Standard Gear – Powr Lok Posi For Chrysler 8.75", Aggressive Design (Part No.59026)

    Powr Lok Posi For Chrysler 8.75", Aggressive Design

    from

    $919.99
    Yukon yoke for Ford 8.8″ truck or passenger with a 1330 U/joint size. 3.625″ snap ring span, 1.125″ cap diameter. Outside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.

    Product Features:
    • Fits Ford 8.8″
    • 30 spline
    • 1330 u-joint size
    • 3.625″ snap ring span
    • 1.062″ cap diameter
    • Outside snap ring design
    • Strap style
    See More

    National – Bearings (Part No.M88048)

    Bearings

    from

    $15.99
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Crowned raceways and rollers to ensure even load distribution for maximum life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    Pro-King – Crush Sleeve (Part No.721A034)

    Crush Sleeve

    from

    $2.89
    Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

    Product Features:
    • All products are designed to meet or exceed OE quality, form, fit and funtion.
    See More

    Yukon Gear – Pinion Nut (Part No.33142)

    Pinion Nut

    from

    $10.99
    Pinion nut for Chrysler 7.25″, 8.0″ IFS, 8.25″, 8.75″ fine spline, 9.25″ front & rear, 7/16″ x 14.

    Product Features:
    • Pinion nut for Chrysler 8.0″ IFS, 8.25″, 8.75″ with 29 spline pinion and 9.25″ rear
    • 7/8″ x 14 thread
    See More

    National – Multi Purpose Seal (Part No.6808N)

    Multi Purpose Seal

    from

    $21.99
    National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Low swell in hydrocarbon fluids
    • Design type: spring loaded; multi-lip
    • Provides good low temperature capability
    • Temperature range: -40°F to 225°F; -40°C to 107°C
    • Delivers quality and reliable performance for every type of repair
    See More

    Motive Gear – Differential Gear Install Kit (Part No.C8.75IKE)

    Differential Gear Install Kit

    from

    $52.99


    Product Features:
    • MINI INSTALL KIT CHRYSLER 8.75 8 3/4″ EARLY 742 CASE
    See More

    Yukon Gear – Chrysler 8.75" "89" Housing Nodular Iron Drop Out Case (Part No.32052)

    Chrysler 8.75" "89" Housing Nodular Iron Drop Out Case

    from

    $564.99
    89 housing nodular Iron Drop Out case, up to 500 HP, Billet adjuster for 8.75″ Chrysler. This dropout does not come with fill plug (Part number CHY612017).

    Product Features:
    • Fits Chrysler 8.75″
    • ’89’ case design
    • Nodular iron for added strength
    See More

    Yukon Gear – Powr Lok Button Kit For Dana 30, Dana 44 & Chrysler 8.75" (Part No.33536)

    Powr Lok Button Kit For Dana 30, Dana 44 & Chrysler 8.75"

    from

    $67.99
    Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses t

    Product Features:
    • Powr Lok button kit
    • Fits Dana Spicer 30, 44 and Chrysler 8.75″
    See More

    Yukon Gear – Dana 60 Pinion Gear Thrust Washer, Standard Open & Tracloc (Also 8.75" Chrysler Std) Dana 70 2Pc (Part No.33287)

    Dana 60 Pinion Gear Thrust Washer, Standard Open & Tracloc (Also 8.75" Chrysler Std) Dana 70 2Pc

    from

    $5.99
    Dana 60 pinion gear Thrust washer, standard Open & TracLoc (also 8.75″ Chrysler STD) Dana 70 2PC.

    Product Features:
    • Pinion gear thrust washer for Dana Spicer 60
    • Fits standard open and Trac Loc applications
    See More

    National – Bearings (Part No.LM104912)

    Bearings

    from

    $15.99
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Crowned raceways and rollers to ensure even load distribution for maximum life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    Yukon Gear – Pinion Install Kit For Chrysler 8.75" (#42) Differential (Part No.13006)

    Pinion Install Kit For Chrysler 8.75" (#42) Differential

    from

    $359.99
    Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

    Product Features:
    • Fits Chrysler 8.75″ ’42’ case
    • Included are pinion bearings and races, pinion seal, pinion nut, complete pinion shim kit, and marking compound with brush.
    See More

    Yukon Gear – Pinion Depth Shim Kit For Toyota8", GM 7.5", 8.2" & 12 Bolt Truck (Part No.55064)

    Pinion Depth Shim Kit For Toyota8", GM 7.5", 8.2" & 12 Bolt Truck

    from

    $39.99
    8″ Toyota, 7.5″ GM, 8.2″ GM, 12T, pinion shim set, & Mazda truck.

    Product Features:
    • Pinion depth shim kit for Toyota 7.5″, 8″ and V6
    See More

    Felpro – Differential Cover Gasket (Part No.RDS 6014)

    Differential Cover Gasket

    from

    $15.99
    Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

    Product Features:
    • Meets or exceeds all original equipment specifications
    • Application specific design to ensure a perfect fit
    • Unsurpassed quality you can trust
    • Validated for fit, form and function
    • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
    See More

    Yukon Gear – The Carrier Bearing Puller (Part No.56034)

    The Carrier Bearing Puller

    from

    $689.99
    The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

    Product Features:
    • Carrier bearing puller
    • Works with an impact gun to safely and easliy remove carrrier bearings
    • Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
    See More

    Yukon Gear – Redi-Sleeve Yoke Saver For 8.75" C, 9.25" C, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD (Part No.30228)

    Redi-Sleeve Yoke Saver For 8.75" C, 9.25" C, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD

    from

    $37.99
    Replacement redi-sleeve yoke saver for 8.75″ c, 9.25″ c, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD .Yukon Mighty seal.

    Product Features:
    • Redi-Sleeve yoke saver
    • Fits Chrysler 8.75″ and 9.25″ rear, Dana Spicer 60, 70, 70U and 70HD
    See More

    Yukon Gear – 8.75" Chrysler Gasket (Part No.23001)

    8.75" Chrysler Gasket

    from

    $12.99
    8.75″ Chrysler gasket.

    Product Features:
    • Dropout gasket
    • Fits Chrysler 8.75″
    See More

    National – Bearings (Part No.M88010)

    Bearings

    from

    $10.49
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Crowned raceways and rollers to ensure even load distribution for maximum life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    Yukon Gear – Bearing Race Driver (Part No.56023)

    Bearing Race Driver

    from

    $219.99
    Bearing race driver. No return.

    Product Features:
    • Bearing race driver
    • Fits M88010 race
    • All steel construction
    See More

    USA Standard Gear – Master Overhaul Kit For Chrysler 8.75" #42 Housing With LM104912/49 Carrier Bearings (Part No.37090)

    Master Overhaul Kit For Chrysler 8.75" #42 Housing With LM104912/49 Carrier Bearings

    from

    $441.99
    USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

    Product Features:
    • Fits Chrysler 8.75″ ’42’ case housing with LM104912 carrier races
    • Uses Koyo bearings and races
    • Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush and gasket.
    See More

    1966 Dodge D100 Series Differentials

    Maybe you’re in the middle of a full rebuild of that 1966 Dodge D100 Series. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 128 different Differentials in our inventory ranging from $2.89 to $919.99. That means you can find the exact parts or products you need to keep that 1966 Dodge D100 Series running smoothly.

    Differentials are only as good as their brand. We stock 10 different brands to make sure you have plenty of trusted parts to choose from for your 1966 Dodge D100 Series. National, Yukon Gear, and Felpro are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

    We know you’ll find the perfect Differentials for your 1966 Dodge D100 Series, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 117 reviews in this category, some of the top rated parts include Bearings with 5.0 stars.

    So if you’re in the market for aftermarket Differentials to keep your 1966 Dodge D100 Series rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

    Differentials Brands To Make Your 1966 Dodge D100 Series Last

    Simple repair, complete replacement, or a full rebuild. No matter the job, your 1966 Dodge D100 Series demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your D100 Series the best it can be. Be sure to browse some of our top Differentials brands and parts.

    Popular Felpro Differentials

    We carry Felpro parts in our stock across Front Housing Cover Gaskets and Automatic Transmission Differential Carrier Gaskets categories, plus more. For a 1966 Dodge D100 Series, our most popular Felpro Differentials include:
    Differential Cover Gasket
    from $15.99
    (1)
    Differential Cover Gasket
    Front Housing Cover Gaskets
    Differential Carrier Gasket
    from $6.49
    (1)
    Differential Carrier Gasket
    Automatic Transmission Differential Carrier Gaskets

    Top 1966 Dodge D100 Series Differentials from National

    National products are another trusted brand when it comes to Differentials for your 1966 Dodge D100 Series. Popular National parts include:
    Multi Purpose Seal
    from $41.99
    (20)
    Multi Purpose Seal
    Differential Pinion Seals
    Bearings
    from $15.99
    (9)
    Bearings
    Front Differential Pinion Bearings
    Bearings
    from $10.49
    (4)
    Bearings
    Rear Differential Pinion Bearings

    FAQs for 1966 Dodge D100 Series Differentials

    What are the most purchased Differentials for the 1966 Dodge D100 Series?

    Out of 128 Differentials for the 1966 Dodge D100 Series, the most popular in our inventory are:
    3 Qt - Penzoil 80W90 Conventional Gear Oil
    from $44.99
    This product is not rated
    3 Qt – Penzoil 80W90 Conventional Gear Oil
    Differential Oil
    Differential Pinion Nut
    from $8.49
    (1)
    Differential Pinion Nut
    Differential Pinion Shaft Nuts
    Bearings
    from $38.49
    (2)
    Bearings
    Front Differential Pinion Bearings

    What are the top-rated 1966 Dodge D100 Series Differentials?

    Top-rated Differentials for your 1966 Dodge D100 Series based on customer reviews/ratings are:
    Bearings
    from $15.99
    (1)
    Bearings
    “As always, these bearings did the job and last forever. Just happy I found them in stock.”