1966 Chevrolet Impala Differentials

Essential 1966 Chevrolet Impala Differentials

Yukon Gear – Spider Gear Set For GM 7.5" & 7.625" Dura Grip Posi, 26 Spline (Part No.16116)

Spider Gear Set For GM 7.5" & 7.625" Dura Grip Posi, 26 Spline

from

$279.99
Yukon spider gear set for GM 7.5″ & 7.625″ Dura Grip posi, 26 spline. This kit does not include clutches. This kit fits Yukon Dura Grip ONLY.

Product Features:
  • Spider gear kit
  • Fits GM gm 7.5″ with 26 spline Dura Grip positraction
  • Includes two side gears, four pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
See More

National – Bearings (Part No.HM89210)

Bearings

from

$14.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Driveworks – Oil Seal (Part No.S-8460N)

Oil Seal

from

$6.29
Value-priced seal meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Yukon Gear – Pinion Install Kit For GM 55P And 55T Differential (Part No.13060)

Pinion Install Kit For GM 55P And 55T Differential

from

$276.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits 1955-1964 GM truck and passenger car
  • Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.
See More

Yukon Gear – Redline Synthetic "Shock Proof" Oil – 4 Quarts (Part No.15004)

Redline Synthetic "Shock Proof" Oil - 4 Quarts

from

$137.99
Redline Synthetic “Shock Proof” Oil. 4 Quarts.

Product Features:
  • Includes four quarts of Redline Shockproof oil
See More

USA Standard Gear – Master Overhaul Kit for the ’64-’72 GM 8.2" 10-bolt Differential (Part No.37051)

Master Overhaul Kit for the '64-'72 GM 8.2" 10-bolt Differential

from

$253.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

Product Features:
  • Fits GM 8.2″
  • Uses Koyo bearings and races
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush and gasket.
See More

ACDelco – Differential Bearing (Part No.J7060723477ACD)

Differential Bearing

from

$88.94
Differential Bearing

Felpro – Differential Cover Gasket (Part No.RDS 55028-1)

Differential Cover Gasket

from

$9.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Yukon Gear – 3/8" X 1-1/4" Ring Gear Bolt, 55P Auburn Conversion Bolt (Part No.33052)

3/8" X 1-1/4" Ring Gear Bolt, 55P Auburn Conversion Bolt

from

$4.99
3/8″ x 1-1/4″ ring gear bolt, 55P AUBURN conversion bolt.

Product Features:
  • Ring gear bolt
  • Fits 1955-1964 GM passenger car with Auburn positraction
  • 3/8″ x 1 1/4″
See More

Yukon Gear – Bearing Race Driver Set, 21 Piece (Part No.56030)

Bearing Race Driver Set, 21 Piece

from

$1566.99
21 Piece bearing race driver set. (Box wt: 140lbs) No return.

Product Features:
  • Bearing race driver set
  • 21 pieces
  • All steel construction
See More

Yukon Gear – High Performance Ring & Pinion Gear Set For GM 12P In A 3.31 Ratio (Part No.24571)

High Performance Ring & Pinion Gear Set For GM 12P In A 3.31 Ratio

from

$464.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.

Product Features:
  • Fits GM 12 bolt passenger car
  • 8.875″ ring gear diameter
  • 30 spline pinion
  • 12 ring gear bolts
  • 3.31 ratio
See More

Yukon Gear – The Carrier Bearing Puller (Part No.56034)

The Carrier Bearing Puller

from

$689.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
  • Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
See More

Dorman – Rear Differential Cover (Part No.697-701)

Rear Differential Cover

from

$20.99
This direct replacement differential cover matches the fit and function of the original equipment diff cover for a reliable, leak-free repair. It features a durable design, made to strict specifications, to help ensure reliable service life.

Product Features:
  • Direct replacement – this differential cover matches the fit and function of the original equipment diff cover on select vehicles.
  • Reliable repair – the smart solution for fixing an existing cover that’s rusted, damaged or leaking differential fluid.
  • Durable construction – this differential cover is made according to strict engineering standards to help ensure dependability
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Yukon Gear – Standard Open Cross Pin (0.795" Diameter) For 8.5" GM – Fits Some Eaton Positractions (Part No.33401)

Standard Open Cross Pin (0.795" Diameter) For 8.5" GM - Fits Some Eaton Positractions

from

$49.99
Standard open cross pin (0.795″ diameter) for 8.5″ GM. fits some Eaton positractions.

Product Features:
  • Cross pin shaft for GM 8.5″ and 8.6″
  • Fits standard open differentials only
  • 0.795″ diameter
See More

Yukon Gear – Bearing Install Kit For GM 8.5" Differential (Part No.11067)

Bearing Install Kit For GM 8.5" Differential

from

$221.99
Yukon Bearing installation kits are perfect for shops & builders who have shims on the shelf and are looking to save cost over a Master Overhaul kit. This kit uses Timken bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring & pinion set.

Product Features:
  • Fits GM 8.5″ rear
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve , marking compound and brush.
See More

Powertrax – Lock Right Locker (Part No.1940-LR)

Lock Right Locker

from

$441.99
The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    Mahle – Differential Cover G (Part No.J7018826576MAH)

    Differential Cover G

    from

    $19.09
    Differential Cover G

    Yukon Gear – Cross Pin Bolt (Part No.33067)

    Cross Pin Bolt

    from

    $6.99
    Cross pin bolt for Chrysler 8.25″, 9.25″ rear, Ford 7.5″, 8.8″, GM 12 bolt car & truck, 7.2″ IFs, 7.5″, 7.6″, 8.0″, 8.25″ IFS & 8.5″.

    Product Features:
    • Cross pin bolt for Chrysler 8.25″ and 9.25″ rear, Ford 7.5″ and 8.8″, GM 12 botl car and truck, 8.5″, 8.25″ IFS, 8.0″, 7.625″, 7.5″ and 7.2″ IFS
    See More

    Yukon Gear – Standard Open Side Gear And Thrust Washer For GM 12 Bolt Car And Truck (Part No.33380)

    Standard Open Side Gear And Thrust Washer For GM 12 Bolt Car And Truck

    from

    $7.99
    Standard Open side gear thrust washer for 12P and 12T GM.

    Product Features:
    • Side gear thust washer for GM 12 bolt passenger car and truck
    • Fits standard open differentials only
    See More

    Yukon Gear – Pinion Nut Washer (Part No.33166)

    Pinion Nut Washer

    from

    $23.99
    Pinion nut washer for GM 12 bolt car & truck, 55-62 GM car & truck, GM 8.2″ & 63-79 Corvette.

    Product Features:
    • Pinion nut washer for GM 12 bolt car and truck, 1955-1964 GM car and truck, GM 8.2″ and 1963-1979 Corvette.
    See More

    Timken – Differential Pinion (Part No.J7020434676TIM)

    Differential Pinion

    from

    $55.88
    Differential Pinion

    Motive Gear – Differential Crush Sleeve (Part No.3954480)

    Differential Crush Sleeve

    from

    $5.49


    Product Features:
    • CRUSH SLEEVE 12 BLT CAR
    See More

    Dorman – Rear Axle Shaft, Left or Right (Part No.630-114)

    Rear Axle Shaft, Left or Right

    from

    $211.99
    Axle shaft damaged or bearings worn out? This axle shaft directly replaces the original equipment on certain vehicles, complete with all necessary application-specific installation components.

    Product Features:
    • Direct replacement – this axle shaft replaces the original equipment on specific vehicle years, makes and models.
    • Complete kit – each shaft includes critical installation hardware and components needed for specific vehicle applications.
    • Durable construction – designed to rigorous standards and tested to ensure performance
    • Trustworthy solution – backed by team of engineers and quality control specialists in the United States
    See More

    Yukon Gear – Redi Sleeve For GM 8.5", 9.5" & 8.2" Bop Yokes (Part No.30229)

    Redi Sleeve For GM 8.5", 9.5" & 8.2" Bop Yokes

    from

    $57.99
    8.5, 9.5, & 8.2 Buick, Oldsmobile, Pontiac GM REDI sleeve yoke saver.Yukon Mighty seal.

    Product Features:
    • Pinion Redi-sleeve
    • Fits GM 8.5″, 9.5″ and 8.2″ Buick, Oldsmobile and Pontiac
    See More

    Dorman – Differential Pinion Yoke Assembly (Part No.697-531)

    Differential Pinion Yoke Assembly

    from

    $315.99
    Worn or damaged differential end yoke causing driveline vibrations? This direct replacement end yoke matches the original equipment part for a trustworthy repair and reliable performance.

    Product Features:
    • Direct replacement – this differential end yoke matches the fit and construction of the original yoke.
    • Excellent value – this replacement end yoke offers original equipment quality at a fraction of the price of dealer parts.
    • Quality materials – this end yoke is machined from cast iron for strength and is precision machined for reliability
    • Validated fit – this differential end yoke has been tested to confirm accurate fit
    See More

    Richmond Gear – RngPnnInstlKt (Part No.83-1019-B)

    RngPnnInstlKt

    from

    $39.49
    RngPnnInstlKt

    Pro-King – Pinion Nut (Part No.740A961)

    Pinion Nut

    from

    $3.99
    Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

    Product Features:
    • All products are designed to meet or exceed OE quality, form, fit and funtion.
    See More

    Yukon Gear – Pinion Nut (Part No.33150)

    Pinion Nut

    from

    $11.99
    Pinion nut for GM 12 bolt car & truck, 55-62 car & truck, 8.2″, 8.2″ Buick/Olds/Pontiac & 63-79 Corvette. 1 1/8″ socket, 7/8″ x 16 thread.

    Product Features:
    • Pinion nut for GM 12 bolt car and truck, 8.2″, 8.2″ Buick, Oldsmobile and Pontiac and 1963-1979 Corvette
    • 7/8″ x 16 thread
    • 1 1/8″ socket
    See More

    1966 Chevrolet Impala Differentials

    Maybe you’re in the middle of a full rebuild of that 1966 Chevrolet Impala. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 194 different Differentials in our inventory ranging from $2.69 to $1,604.99. That means you can find the exact parts or products you need to keep that 1966 Chevrolet Impala running smoothly.

    Differentials are only as good as their brand. We stock 13 different brands to make sure you have plenty of trusted parts to choose from for your 1966 Chevrolet Impala. Valvoline, FELPRO, and Yukon Gear are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

    We know you’ll find the perfect Differentials for your 1966 Chevrolet Impala, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 1,434 reviews in this category, some of the top rated parts include Bearings with 3.9 stars and Differential Carrier Shim Kit with 2.7 stars.

    So if you’re in the market for aftermarket Differentials to keep your 1966 Chevrolet Impala rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

    Differentials Brands To Make Your 1966 Chevrolet Impala Last

    Simple repair, complete replacement, or a full rebuild. No matter the job, your 1966 Chevrolet Impala demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your Impala the best it can be. Be sure to browse some of our top Differentials brands and parts.

    Popular Driveworks Differentials

    We carry Driveworks parts in our stock across Differential Pinion Seals categories, plus more. For a 1966 Chevrolet Impala, our most popular Driveworks Differentials include:
    Oil Seal
    from $6.29
    (1)
    Oil Seal
    Differential Pinion Seals

    Top 1966 Chevrolet Impala Differentials from Felpro

    Felpro products are another trusted brand when it comes to Differentials for your 1966 Chevrolet Impala. Popular Felpro parts include:
    Differential Cover Gasket
    from $9.99
    (195)
    Differential Cover Gasket
    Rear Differential Cover Gaskets
    Differential Cover Gasket
    from $7.49
    (7)
    Differential Cover Gasket
    Rear Housing Cover Gaskets

    FAQs for 1966 Chevrolet Impala Differentials

    What are the most purchased Differentials for the 1966 Chevrolet Impala?

    Out of 194 Differentials for the 1966 Chevrolet Impala, the most popular in our inventory are:
    DEX/MERC Automatic Transmission Fluid, 1 Gallon
    from $35.99
    (17)
    DEX/MERC Automatic Transmission Fluid, 1 Gallon
    Differential Oil
    3 Qt - 80W90 Conventional Gear Oil With Posi Additive
    from $57.99
    This product is not rated
    3 Qt – 80W90 Conventional Gear Oil With Posi Additive
    Differential Oil

    What are the top-rated 1966 Chevrolet Impala Differentials?

    Top-rated Differentials for your 1966 Chevrolet Impala based on customer reviews/ratings are:
    Bearings
    from $23.99
    (7)
    Bearings
    “Good price”
    Differential Carrier Shim Kit
    from $8.49
    (3)
    Differential Carrier Shim Kit
    “worked great”
    Multi Purpose Seal
    from $13.99
    (2)
    Multi Purpose Seal
    “Front seal. Old one was leaking”