1966 Chevrolet C20 Pickup Steering and Chassis Parts

Essential 1966 Chevrolet C20 Pickup Steering and Chassis Parts

Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)

Transmission Oil Cooler Reinstallation Kit

from

$20.79
Provides all necessary components for the proper reinstallation of an Imperial transmission oil cooler.

Product Features:
  • Transmission cooler reinstallation kit
  • Contains part numbers 248001, 226201, 240250 and 4 hose clamps
  • Provides all hardware for reinstallation of Imperial transmission coolers
  • Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
See More

MOOG – Ball Joint (Part No.K6122)

Ball Joint

from

$71.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • DESIGN CHANGE ┐ New and improved follower ball joint design to extend product life and simplify installation
  • PROBLEM SOLVER« GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
  • STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
  • RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
See More

Lares – Remanufactured Power Steering Control Valve (Part No.25)

Remanufactured Power Steering Control Valve

from

$298.99
Power Steering Control Valves are thoroughly cleaned and exterior surfaces reconditioned for like-new look. Each component is carefully inspected and replaced if not to OE tolerances. All seals and O-rings are replaced with OE equivalent parts. Each unit is tested and balanced to insure OE performance. Ball joints are properly lubricated. Painted with a high quality paint. All units are carefully packaged to insure safe arrival at your door. Remanufactured in the USA.
See More

Lares – Remanufactured Manual Steering Gear Box (Part No.8010)

Remanufactured Manual Steering Gear Box

from

$431.99
Manual Steering Gears are thoroughly cleaned and exterior surfaces reconditioned for like-new look. Each component is carefully inspected and replaced if not to OE tolerances. All seals and O-rings are replaced with OE equivalent parts. Each unit is filled with a high quality grease with a special polymer to reduce oil separation. Each unit is tested to insure OE performance. Painted with a high quality paint. All units are carefully packaged to insure safe arrival at your door. Remanufactured in the USA.
See More

Rare Parts – Track Bar Bushing (Part No.RP16992)

Track Bar Bushing

from

$43.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Reduces vibration
  • UV resistant
  • No Squeak
See More

Carquest Premium – Bulk – 3/8" I.D. Return Hose (J189) (sold by foot) (Part No.35001)

Bulk - 3/8" I.D. Return Hose (J189) (sold by foot)

from

$7.79
Bulk – 3/8" I.D. Return Hose (J189) (sold by foot)

Driveworks – Ball Joint (Part No.DW-K6122)

Ball Joint

from

$15.79
Driveworks Brand ball joints are made to meet OE specifications. They play a critical role in the safe operation of the vehicle by eliminating unstable front-end suspension. Driveworks Brand chassis parts ensure improved steering response and durability.

Product Features:
  • Meets or exceeds OE performance specifications
  • Premium Polychloroprene boot provides extended temperature range and better wear resistance
  • Test-proven stud material helps prevent premature stud failure
  • Provides premium gauge steel construction for strength and durability
  • Performance tested to ensure durability
See More

Powercraft – Control Valve Seal Kit (Part No.7864)

Control Valve Seal Kit

from

$24.29
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

National – Multi Purpose Seal (Part No.7013S)

Multi Purpose Seal

from

$20.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Powercraft – Pump Seal Kit (Part No.8755)

Pump Seal Kit

from

$34.49
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Powercraft – Steering Gear Major Seal Kit (Part No.7859)

Steering Gear Major Seal Kit

from

$52.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Cardone – Power Steering Pump (Part No.20-6084)

Power Steering Pump

from

$91.99
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Product Features:
  • All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
  • All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
  • Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
  • Units are supplied with 100% tested and calibrated pressure relief valves.
  • Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
See More

Carquest Premium – Return Hose Assembly (Part No.36359)

Return Hose Assembly

from

$66.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More

Powercraft – Pump Drive Shaft Seal Kit (Part No.8711)

Pump Drive Shaft Seal Kit

from

$7.79
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Rare Parts – Idler Arm (Part No.RP20211)

Idler Arm

from

$288.99
Rare Parts prides itself in only manufacturing high quality chassis parts. Diamond Series parts will exceed OEM and aftermarket products. Examples would be: forged verses stamped housings, greaseable, tighter machining tolerances, and proper heat treat of ball studs and mating components. Every Diamond Series part is tested and inspected in our facility prior to being sold. So rest assured you are getting a quality part when quality counts.

Product Features:
  • Increased forging size
  • Precision machining tolerances
  • Heat treated components
  • Low friction
See More

Lares – New Steering Coupling Assembly (Part No.202)

New Steering Coupling Assembly

from

$52.99
New Rag Joint steering couplers are carefully engineered to OE specifications. All units are complete with lower casting, rubber disk and mounting bolts already assembled for easy, trouble free installation. All units are carefully packaged to insure safe arrival at your door
See More

MOOG – Stabilizer Bar Bushing Kit (Part No.K201175)

Stabilizer Bar Bushing Kit

from

$21.49
Backed by superior materials and rigorous testing, MOOG synthetic fabric lined sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • INNOVATIVE DESIGN — Synthetic fabric lining paired with a high-quality natural rubber material promotes durability
  • EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
  • HIGHLY PRECISE ENGINEERING — Optimized for quiet operation that eliminates the need for lubrication and maintenance
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • Incorporates proven design and engineering features
  • Inner sleeve is phosphate coated for corrosion protection
See More

Monroe – Magnum Steering Damper (Part No.SC2915)

Magnum Steering Damper

from

$49.99
The Monro-Magnum® steering stabilizer stops vibration before it gets to the driver. Acting as a horizontal shock absorber, Monro-Magnum® steering stabilizers help reduce vibrations that travel through the steering system to the driver.

Product Features:
  • 1/2 inch Piston Rod Heavy-duty nitrocarburized rod for long service life
  • All Weather Fluid Contains special modifiers to reduce friction and ensure smooth rod reaction.
  • Full Displaced Valving Better valving range on both the compression and extension cycles of the unit for a smooth comfortable ride.
  • Micro-Cellular Gas Design Allows unit to be mounted horizontally.
  • Sintered Iron Piston Stronger than traditional metals, enhances durability for longer service life.
  • Special Seal ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
See More

Powercraft – Power Cylinder Piston Rod Seal Kit (Part No.7906)

Power Cylinder Piston Rod Seal Kit

from

$22.79
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More

Carquest Premium – Pressure Hose Assembly (Part No.39994)

Pressure Hose Assembly

from

$48.49
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More

MOOG – Stabilizer Bar Bushing Kit (Part No.K8204)

Stabilizer Bar Bushing Kit

from

$9.49
Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • PREMIUM MATERIALS — Made from high-quality natural rubber material for durability and ride performance
  • EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
  • HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • Inner sleeve is phosphate coated for corrosion protection
See More

National – Multi Purpose Seal (Part No.480821)

Multi Purpose Seal

from

$8.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Rare Parts – King Pin Set (Part No.RP30415)

King Pin Set

from

$75.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Restores OE alignment
  • Complete kit does 1 vehicle
  • Precision machining tolerances
  • Heat treated components
See More

Carquest Premium – Pressure Hose Assembly (Part No.35524)

Pressure Hose Assembly

from

$47.49
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More

Rare Parts – Tie Rod End (Part No.RP25693)

Tie Rod End

from

$223.99
Rare Parts prides itself in only manufacturing high quality chassis parts. Diamond Series parts will exceed OEM and aftermarket products. Examples would be: forged verses stamped housings, greaseable, tighter machining tolerances, and proper heat treat of ball studs and mating components. Every Diamond Series part is tested and inspected in our facility prior to being sold. So rest assured you are getting a quality part when quality counts.

Product Features:
  • Greaseable
  • Precision machining tolerances
  • Heat treated components
  • Low friction
See More

Rare Parts – Tie Rod Sleeve (Part No.RP25482)

Tie Rod Sleeve

from

$71.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Complete with clamps
  • Used to set Toe in or out
  • replaces rusted or corroded sleeves
  • Used to connect inner and outer tie rod ends
See More

Powercraft – Steering Gear Lower Pitman Shaft Seal Kit (Part No.7856)

Steering Gear Lower Pitman Shaft Seal Kit

from

$43.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Cardone – Power Steering Filter (Part No.20-0058F)

Power Steering Filter

from

$48.49
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element
  • Patented built-in bypass that filters up to 190 micron particles
  • Designed to extend the life of the steering system
  • Sure-grip barb connections are included to ensure proper hose fitment
See More

1966 Chevrolet C20 Pickup Steering and Chassis Parts

You count on your 1966 Chevrolet C20 Pickup to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Steering and Chassis Parts. With 51 Steering and Chassis Parts ranging in price from $2.99 to $431.99, you’re sure to find everything you need for your 1966 Chevrolet C20 Pickup.

Brands matter. If you want to shop a specific Steering and Chassis Parts brand, we stock 12 different brands like Imperial, Carquest Premium, and Cardone. 1966 Chevrolet C20 Pickup Steering and Chassis Parts start as low as $2.99!

One of the best ways to find top quality OEM or aftermarket Steering and Chassis Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 1,134 extensive product reviews on 1966 Chevrolet C20 Pickup Steering and Chassis Parts. Some of the top-rated Steering and Chassis Parts products we carry are New Steering Coupling Assembly with 3.6 stars and Pump Complete Rebuild Kit with 3.8 stars.

Did we mention you can order your Steering and Chassis Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Steering and Chassis Parts inventory for your 1966 Chevrolet C20 Pickup below to get started!

Top-Rated Steering and Chassis Parts Brands For Your 1966 Chevrolet C20 Pickup

Trusted Steering and Chassis Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1966 Chevrolet C20 Pickup running right for years to come. In our inventory you’ll find brands like Imperial, Carquest Premium, Cardone, and even more.

Popular Carquest Premium Steering and Chassis Parts

You’ll find popular Carquest Premium brand products across Power Steering Parts. All are waiting to get your 1966 Chevrolet C20 Pickup back on the road. Some of the top-rated Carquest Premium products in these categories are:
Repair Fittings
from $8.49
(1)
Repair Fittings
Power Steering Return Hoses

Top-Rated Imperial Steering and Chassis Parts


If Imperial are what you’re looking for, our inventory holds plenty. We stock Imperial brand Steering and Chassis Parts for your 1966 Chevrolet C20 Pickup, and some of our most reviewed Imperial parts include:
Transmission Oil Cooler Hose
from $32.49
(94)
Transmission Oil Cooler Hose
Power Steering Pressure Hoses
Power Steering Oil Cooler
from $28.49
(83)
Power Steering Oil Cooler
Power Steering Coolers
Mounting Kit System
from $11.49
(27)
Mounting Kit System
Power Steering Coolers

FAQs for 1966 Chevrolet C20 Pickup Steering and Chassis Parts

What are the most purchased Steering and Chassis Parts for the 1966 Chevrolet C20 Pickup?

Out of 51 Steering and Chassis Parts for the 1966 Chevrolet C20 Pickup, the most popular in our inventory are:
Bulk - 3/8" I.D. Return Hose (J189) (sold by foot)
from $7.79
This product is not rated
Bulk – 3/8" I.D. Return Hose (J189) (sold by foot)
Power Steering Reservoir Hoses
Power Steering Filter
from $31.99
(59)
Power Steering Filter
Power Steering Filters
Bulk - 3/8" ID Return Hose (CPE) (sold by each)
from $2.99
This product is not rated
Bulk – 3/8" ID Return Hose (CPE) (sold by each)
Power Steering Return Hoses

What are the top-rated 1966 Chevrolet C20 Pickup Steering and Chassis Parts?

Top-rated Steering and Chassis Parts for your 1966 Chevrolet C20 Pickup based on customer reviews/ratings are:
New Steering Coupling Assembly
from $52.99
(16)
New Steering Coupling Assembly
“Very high quality item. Perfect replacement and fit. Easy to install. Do NOT buy the $10 one. Pay the [$] and you’ll see the high quality fittings and”
Pump Complete Rebuild Kit
from $62.99
(14)
Pump Complete Rebuild Kit
“No complaints had all seals and o rings needed for the rebuild”
Pump Seal Kit
from $36.99
(5)
Pump Seal Kit
“Worked perfect!”