1966 Chevrolet Biscayne Drivetrains
More 1966 Chevrolet Biscayne Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1966 Chevrolet Biscayne, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1966 Chevrolet Biscayne Drivetrains
Yukon Gear – Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt (Part No.33286)
from
$9.99
5/16″-18 cover bolt, Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, Chrysler 9.25 rear, GM 7.5″, 7.625″, 8.2″, 8.5″, 12 bolt passenger car and truck.
Product Features:
See More
Product Features:
- Cover bolt for Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, GM 7.5″, 7.625″, 8.2″, 8.5″ and 12 bolt passenger car and truck.
- 1/2″ head
Motive Gear – Differential Pinion Shim Kit (Part No.1100)
from
$7.49
High-quality Differential Component Shim
Product Features:
See More
Product Features:
- SHIM KIT FITS-8.25-F7.5-AMC20-GM0
Yukon Gear – Notched Cross Pin Shaft For 12P And 12T GM (Part No.33429)
from
$51.99
Notched cross pin shaft for 12P and 12T GM. This cross pin shaft is not compatible with Powertrax Lock Rights or Spartan Lockers.
Product Features:
See More
Product Features:
- Cross pin shaft
- Fits GM 12 bolt passenger car and truck
- Notched
- Not compatible with Spartan Lockers or Lock Rights
Yukon Gear – Crush Sleeve (Part No.33110)
from
$5.99
Crush sleeve for GM 7.5″, 7.6″, 7.6″ IFS, 8.0″, 8.2″ & 8.2″ Buick/Olds/Pontiac. .625″ long.
Product Features:
See More
Product Features:
- Crush sleeve for GM 7.5″, 7.625″, 7.6″ IFS, 8.2″ and 8.2″ Buick, Oldsmobile and Pontiac
- 0.625″ tall
Yukon Gear – Yoke For GM 8.2" With A 1310 U/Joint Size – This Yoke Uses U-Bolts (Part No.41094)
from
$219.99
Yukon yoke for GM 8.2″ with a 1310 U/joint size. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring. This yoke uses u-bolts. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits GM 8.2″
- 25 spline
- 1310 u-joint size
- 3.219″ snap ring span
- 1.062″ cap diameter
- Outside snap ring design
- U-bolt style
Yukon Gear – Billet Yoke For GM 12P And 12T With A 1350 U/Joint Size (Part No.41154)
from
$359.99
Yukon billet yoke for GM 12P and 12T with a 1350 U/joint size. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits GM 12 bolt passenger car and truck
- 30 spline
- 1350 u-joint size
- Outside snap ring design
- 3.625″ snap ring span
- 1.188″ cap diameter
- U-bolt style
Dorman – Spindle Nut 3/4 In.-20 Hex 1-1/16 In. (sold by each) (Part No.615-065)
from
$4.29
This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Yukon Gear – Standard Open Spider Gear Kit For ’55 To ’64 GM Chevy 55P With 17 Spline Axles (Part No.16046)
from
$269.99
Yukon standard open spider gear kit for ’55 to ’64 GM Chevy 55P with 17 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Spider gear kit
- Fits 1955-1964 GM passenger car open differential
- Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
Motive Gear – Ring Gear Bolt (Part No.14066913)
Yukon Gear – 8.5" & 8.2" GM Carrier Installation Kit (Part No.57008)
from
$109.99
Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for GM 8.2″ & 8.5″ differential. This kit contains carrier bearings, races and shims.
Product Features:
See More
Product Features:
- Fits GM 7.5″, 7.625″ 8.2″ and 8.5″
- Includes carrier bearings and races and “super” carrier shim kit
National – Multi Purpose Seal (Part No.6818)
from
$21.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
National – Shaft Repair Sleeve (Part No.99152)
from
$40.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Yukon Gear – 1310, U/Jnt Straps & Bolts, 8.5" Front, 12P & 12T GM (Part No.41196)
from
$67.99
1310, U/Jnt straps & bolts, 8.5″ front, 12P & 12T GM.
Product Features:
See More
Product Features:
- u-joint strap kit
- Fits GM 12 bolt passenger car and truck and 8.5″ front
- 1310 u-joint size
- Includes two straps and four bolts
Yukon Gear – C/Clip (Part No.33083)
from
$8.99
C/Clip for Chrysler 8.25″, Ford 7.5″, 8.8″, GM 12 bolt car & truck, 8.2″, 8.5″ & 8.6″.
Product Features:
See More
Product Features:
- c-clip for Chrysler 8.25″, Ford 8.8″, GM 12 bolt car and truck and GM 8.2″, 8.5″ and 8.6″
- .150″ thick
Richmond Gear – Differential Spool (Part No.81-1030-1)
from
$259.99
Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!
Product Features:
See More
Product Features:
- For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
- The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
- Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
- Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
- Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
Yukon Gear – Minor Install Kit For GM 12 Bolt Car Differential (Part No.12043)
from
$151.99
Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush. (Includes Supershims).
Product Features:
See More
Product Features:
- Fits GM 12 bolt passenger car
- Included are a pinion seal, crush sleeve, complete shim kit, marking compound and brush.
Yukon Gear – Bearing Race Driver (Part No.56020)
from
$215.99
Bearing race driver. No return.
Product Features:
See More
Product Features:
- Bearing race driver
- Fits M802011 race
- All steel construction
Driveworks – Tapered Roller Bearing (Part No.S-M-802011)
Yukon Gear – 7.5" & 8.2" GM Redi Sleeve Yoke Saver (Part No.30221)
from
$136.99
7.5″ & 8.2″ GM REDI sleeve yoke saver.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Pinion Redi-sleeve
- Fits GM 7.5″, 7.625″ and 8.2″
Yukon Gear – 1541H Alloy Right Hand Rear Axle For ’58-’64 GM 55P (Part No.21632)
from
$451.99
Yukon 1541H alloy right hand rear axle for ’58-’64 GM 55P with a length of 30-1/4 inches, and 17 splines. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H alloy rear axles come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- 17 spline
- 5 lug
- 30.25″ long
- Fits 1958-1964 GM passenger car
- Right hand side
National – Bearings (Part No.A-6)
from
$16.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – 14 Plate Duragrip Composite Clutches For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron ‘Vette (Part No.16064)
from
$373.99
Product Features:
See More
- Clutch kit
- Fits Ford 8.8″, 1963-1979 Corvette, GM 12 bolt passenger car and truck, 8.2″, 8.5″ and 8.6″ Dura Grip positraction
- 14 piece kit
- Composite clutches
National – Multi Purpose Seal (Part No.7412S)
from
$14.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Dorman – Help – Axle Shaft Lock Assortment (Part No.81050)
from
$6.49
This drive axle shaft lock C-clip is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this drive axle shaft lock C-clip matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this clip is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Yukon Gear – Standard Open Spider Gear Kit For GM 12 Bolt Car And Truck With 30 Spline Axles (Part No.16043)
from
$207.99
Yukon standard open spider gear kit for GM 12P and 12T with 30 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Spider gear kit
- Fits GM 12 bolt passenger car and truck open differential with 30 spline axles
- Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
National – Bearings (Part No.M86610)
from
$9.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Powertrax – Lock Right Locker (Part No.1940-LR)
from
$441.99
The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles. Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction. Powertrax® = Extreme Traction Systems!
See More
Felpro – Differential Cover Gasket (Part No.RDS 55028-1)
from
$9.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Popular 1966 Chevrolet Biscayne Drivetrains Categories
1966 Chevrolet Biscayne Drivetrains
You count on your 1966 Chevrolet Biscayne to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 216 Drivetrains ranging in price from $2.69 to $994.99, you’re sure to find everything you need for your 1966 Chevrolet Biscayne.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 16 different brands like Valvoline, Moog, and Felpro. 1966 Chevrolet Biscayne Drivetrains start as low as $2.69!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 4,935 extensive product reviews on 1966 Chevrolet Biscayne Drivetrains. Some of the top-rated Drivetrains products we carry are Greaseable Super Strength Universal Joint with 4.6 stars and Universal Joint with 4.2 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1966 Chevrolet Biscayne below to get started!
Top-Rated Drivetrains Brands For Your 1966 Chevrolet Biscayne
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1966 Chevrolet Biscayne running right for years to come. In our inventory you’ll find brands like Valvoline, Moog, Felpro, and even more.
Popular Mr. Gasket Drivetrains
You’ll find popular Mr. Gasket brand products across Differentials. All are waiting to get your 1966 Chevrolet Biscayne back on the road. Some of the top-rated Mr. Gasket products in these categories are:
Top-Rated Drivetrains
If are what you’re looking for, our inventory holds plenty. We stock brand Drivetrains for your 1966 Chevrolet Biscayne, and some of our most reviewed parts include:
from
$12.79
(446)
MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart
Differential Oil
FAQs for 1966 Chevrolet Biscayne Drivetrains
What are the most purchased Drivetrains for the 1966 Chevrolet Biscayne?
Out of 216 Drivetrains for the 1966 Chevrolet Biscayne, the most popular in our inventory are:
What are the top-rated 1966 Chevrolet Biscayne Drivetrains?
Top-rated Drivetrains for your 1966 Chevrolet Biscayne based on customer reviews/ratings are:
from
$32.99
(37)
Greaseable Super Strength Universal Joint
“grease fitting I like location dont like needle design to grease should be regular design fitting”
