1966 Buick Sportwagon Performance and Racing Products

Essential Performance and Racing Products for 1966 Buick Sportwagons

Powertrax – Lock Right Locker (Part No.1910-LR)

Lock Right Locker

from

$376.99
The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    MSD Ignition – Distributor; Buick V8 Billet; 400-455 (Part No.8517)

    Distributor; Buick V8 Billet; 400-455

    from

    $545.99
    This distributor uses a high output magnetic trigger to fire an MSD Ignition control. Accurate trigger signals and spark delivery are the responsibility of the QPQ-coated steel shaft. A sealed ball bearing and long sintered bushing hold this shaft stable at any RPM. An adjustable mechanical advance mechanism is mounted on top of the shaft. Nylon pads ensure smooth movement of the fine balanced weights for accurate timing advancement. A variety of advance stop bushings and springs are supplied so you can dial in a custom curve.

    Product Features:
    • CNC Machined Billet Alum. Housing and Billet Alum. Base
    • Must Be Used w/An MSD Ignition Control
    • Must Be Used w/An MSD 6/7/8/10 Series Ignition
    • Mech. advance assem. can be locked out for crank trigger systems
    • QPQ coated polished steel shaft; guided by sealed ball bearings
    • Easy-to-adjust mech. advance w/supplied springs and stop bushings
    • No CARB Exemption Order Number
    See More

    B & M – Performance Torque Converter for GM TH400, 350, & 375 Transmissions (Part No.20400)

    Performance Torque Converter for GM TH400, 350, & 375 Transmissions

    from

    $299.99
    Torque Converter – Tork Master 2000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: Tork Master 2000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) The Tork Master is B&M’s lowest cost

    Product Features:
    • New Precision Pump Drive Tube
    • Pressure Tested
    • Fully Balanced
    • Needle Thrust Bearing
    • New Thrust Washer
    See More

    Motive Gear – Performance Differential Ring and Pinion (Part No.G888373)

    Performance Differential Ring and Pinion

    from

    $199.99


    Product Features:
    • GM 12BL 8.875 R/P 3.73 MGP
    See More

    Mallory – Unilite Ignition Module (Part No.605)

    Unilite Ignition Module

    from

    $85.29
    Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

    Product Features:
    • Service Part
    • No Moving Parts To Wear Out
    • Self Contained Unit
    • Can Drive OEM
    • Can Drive High Performance Ignition Coils
    See More

    FAG US – CUP (Part No.LM48510)

    CUP

    from

    $7.69
    CUP

    MSD Ignition – Blaster 2 Coil: High Performance Ignition Upgrade (Part No.8202)

    Blaster 2 Coil: High Performance Ignition Upgrade

    from

    $49.99
    If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD blaster ignition, MSD 5, 6 or 7, the blaster coil line is the right choice. All of the blaster coils are designed for improved spark output. Special 100:1 windings are used to provide maximum build-up of voltage. These windings are held secure and kept cool in an oil filled metal canister. The tower assembly is molded of durable alkyd material due to its high dielectric characteristics while wide spaced brass primary terminals prevent the possibility of spark. There are several versions of the blaster coil available. All of them have the same internal specifications, but have different housings or components. Each blaster coil can be used with a stock ignition, blaster ignition, MSD 5, 6 or 7 ignition control. Most late model vehicles with electronic ignitions do not require a ballast resistor, check your ignition and manufacturers specifications to determine if a ballast is required in your application.

    Product Features:
    • Improved output coil for electronic ignitions
    • Works w/Blaster Ignition Or MSD 5/6/7 Series
    • Ballast Resistor Required If Used w/Stock Points Ignition
    • Alkyd tower w/high dielectric properties lessens carbon tracking
    See More

    Earls Performance Product – Brake Bleeder Screws (Part No.280029ERL)

    Brake Bleeder Screws

    from

    $40.99
    Brake Bleeder Screws

    Edelbrock – Performer RPM Carb/Plate Nitrous Systems Square-Bore Carbs (100-250 Hp) (Part No.70090)

    Performer RPM Carb/Plate Nitrous Systems Square-Bore Carbs (100-250 Hp)

    from

    $875.99


    Product Features:
    • Designed For Carbureted V8s
    • Power Increases From 100-250 HP
    • Precision EDM Machined Spray Bars
    • Simple To Install
    See More

    Accel – Distributor Cap And Rotor Kit (Part No.8124)

    Distributor Cap And Rotor Kit

    from

    $48.49


    Product Features:
    • Heavy Duty Cap and Rotor Kit
    • With Brass Inserts
    See More

    Hays – Power Train (Part No.85-113)

    Power Train

    from

    $641.99
    Power Train

    Hays – Power Train (Part No.85-112)

    Power Train

    from

    $665.99
    Matched assembly for maximum reliability. An excellent choice for high performance street applications.

    Product Features:
    • Built As Matched Assembly
    • Exceptional Performance
    • Exceptional Durability
    • Long Term Dependability
    • Designed for Street And Street Strip Applications
    See More

    B & M – Transmission Kit, Master Overhaul Kit For TH400 (Part No.21041)

    Transmission Kit, Master Overhaul Kit For TH400

    from

    $409.99
    These kits include all of the necessary components to rebuild your automatic transmission. OEM style gaskets included. Kits do not include overhaul instructions – please refer to factory shop manual for proper assembly procedures.

    Product Features:
    • Complete High Perf. Or Racing Trans. Overhaul
    • Includes Only OEM Valvebody Gaskets
    • Instructions Not Included
    See More

    B & M – Transpak For 65-87 TH400 Transmission (Part No.20228)

    Transpak For 65-87 TH400 Transmission

    from

    $141.99
    The B&M Transpak has all the features in the Shift Improver Kit, plus it provides additional driver manual control. Retain full automatic features and standard shift points with selector in Drive.

    Product Features:
    • Recalibrate Auto. Transmission
    • Optimum Performance
    • Select Your App. Mode
    • Improves Transmission Life
    • Trans. Removal Not Required
    • Downshift At Any Speed
    • Great For Trailer Towing
    • For Heavy Loads Driving Downhill
    See More

    B & M – Transpak For 68-81 TH 350 Transmission (Part No.30228)

    Transpak For 68-81 TH 350 Transmission

    from

    $141.99
    The B&M Transpak has all the features in the Shift Improver Kit, plus it provides additional driver manual control. Retain full automatic features and standard shift points with selector in Drive.

    Product Features:
    • Recalibrate Auto. Transmission
    • Optimum Performance
    • Select Your App. Mode
    • Improves Transmission Life
    • Trans. Removal Not Required
    See More

    Mallory – Distributor Condenser (Part No.401)

    Distributor Condenser

    from

    $17.09
    Distributor Condenser

    Mr. Gasket – Thermocap Radiator Cap (Part No.2476BK)

    Thermocap Radiator Cap

    from

    $48.09
    The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.

    Product Features:
    • Indicates coolant temperature
    • Helps prevent coolant injuries
    • Fahrenheit and centigrade readings
    • Color-coded temperature ranges
    • Integrated coolant reclamation valve
    • Improves under-hood appearance
    • Chromed crown with a colored trim ring
    See More

    Mallory – Mallory Kit: Unil Conv: Delco: V8 (Part No.501)

    Mallory Kit: Unil Conv: Delco: V8

    from

    $134.99
    Put an end to high maintenance point ignition systems by installing a proven Mallory Unilite ignition conversion kit. Features at a glance, improves performance and fuel efficiency, easy to install with simple hand tools, reduced maintenance and is available for all popular 12-volt negative ground domestic cars and trucks.

    Product Features:
    • Easy Installation
    • Improved Fuel Economy
    • Reduced Maintenance
    • Accurate Timing
    • Improved Performance
    • Provides A Simple Conversion
    • No Moving Parts To Wear Out
    See More

    Mallory – Unilite Breakerless Ignition Conversion Kit (Part No.503M)

    Unilite Breakerless Ignition Conversion Kit

    from

    $176.99
    Put an end to high maintenance point ignition systems by installing a proven Mallory Unilite ignition conversion kit. Features at a glance, improves performance and fuel efficiency, easy to install with simple hand tools, reduced maintenance and is available for all popular 12-volt negative ground domestic cars and trucks.

    Product Features:
    • Easy Installation
    • Improved Fuel Economy
    • Reduced Maintenance
    • Accurate Timing
    • Improved Performance
    • Provides A Simple Conversion
    • No Moving Parts To Wear Out
    See More

    Edelbrock – Performer RPM 2 Carb/Plate Nitrous Systems for Dominator (Part No.70083)

    Performer RPM 2 Carb/Plate Nitrous Systems for Dominator

    from

    $1138.99


    Product Features:
    • Designed For Carbureted V8 Engines
    • Enhanced Flow Capacity
    • Add Power In Stages
    • Softens The Hit Of The Nitrous System
    • Simple To Install
    See More

    Edelbrock – Performer RPM Carb/Plate Nitrous Systems for Square-Bore Carbs (75-250 Hp) (Part No.70003)

    Performer RPM Carb/Plate Nitrous Systems for Square-Bore Carbs (75-250 Hp)

    from

    $1113.99


    Product Features:
    • Designed To Add Power In Stages
    • Softens The Hit Of The Nitrous System
    • Control Excessive Tire Spin
    • Control Violent Chassis Reaction
    • Allows You To Adjust The 1st Stage
    See More

    Edelbrock – Performer RPM Carb/Plate Nitrous Systems 4500 Series Carbs (100-150-250 Hp) (Part No.70053)

    Performer RPM Carb/Plate Nitrous Systems 4500 Series Carbs (100-150-250 Hp)

    from

    $757.99


    Product Features:
    • Designed For Carbureted V8 Engines
    • Simple To Install
    See More

    Hurst – Manual Shifter, Competition Plus Shifter (Part No.3918014)

    Manual Shifter, Competition Plus Shifter

    from

    $533.99
    The industry standard for over 30 years, this shifter offers state of the art transmission control for popular manual transmissions. Dedicated applications assure a custom fit to a wide variety of vehicles.

    Product Features:
    • High Ratio Pivot Mechanism
    • Adjustable Bias Spring Loads
    • Adjustable Stops
    • Chrome Plated Steel Bolt On Stick
    • Easy Installation
    See More

    Hurst – Manual Shifter, Super Street (Part No.3917535)

    Manual Shifter, Super Street

    from

    $499.99
    The industry standard for over 30 years, this shifter offers state of the art transmission control for popular manual transmissions. Dedicated applications assure a custom fit to a wide variety of vehicles.

    Product Features:
    • 7.5 in. Tall Chrome Plated Stick
    • High Mounting Design
    • Heat Treated Components
    • Adjustable Gear Stops
    • Complete With Hardware
    See More

    Hurst – Manual Competition Plus Shifter (Part No.3917307)

    Manual Competition Plus Shifter

    from

    $548.99
    The industry standard for over 30 years, this shifter offers state of the art transmission control for popular 4 speed manual transmissions. Dedicated applications assure a custom fit to a wide variety of vehicles having factory consoles.

    Product Features:
    • High Ratio Pivot Mechanism
    • Adjustable Bias Spring Loads
    • Adjustable Stops
    • Chrome Plated Steel Bolt On Stick
    • Easy Installation
    See More

    Mr. Gasket – Alternator Bracket (Part No.9850)

    Alternator Bracket

    from

    $25.99
    Hold your alternator securely in place with Mr. Gasket chrome alternator bracket. Chrome plated heavy gauge steel for long lasting good looks. Must be used with #9852.

    Product Features:
    • Chrome Plated Steel
    • F-Style
    • Heavy Gauge Steel Construction
    • Fits Small Block Chevy 265-400 CID
    • Must Be Used With Part 9852
    See More

    Upgrade your 1966 Buick Sportwagon with Top-Quality Performance and Racing Products

    When it comes to maintaining or upgrading your 1966 Buick Sportwagon, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Buick or enhancing its overall performance, Performance and Racing Products are key to keeping your Sportwagon functioning at its best. At Advance Auto Parts, we offer a wide selection of 58 Performance and Racing Products for the 1966 Buick Sportwagon, designed to meet your needs without breaking the bank. From Performance Ignition Product replacements to Performance Engines upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

    Affordable Prices and Wide Selection

    Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1966 Buick Sportwagon at great prices. Our Performance and Racing Products inventory for this model ranges from just $7.69 to $1,138.99, with an average price of $425.70. Our 58 Performance and Racing Products in stock come from 13 trusted brands, so you’re sure to find the right part for your 1966 Buick Sportwagon without overspending.

    Top Brands and High Customer Satisfaction

    Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1966 Buick Sportwagon, we stock popular OEM and aftermarket Performance and Racing Products from top names like Mallory, Mr. Gasket, Accel, and more. Mallory Performance and Racing Products start at just $17.09 and boast an impressive 5 stars average rating from customers. Mr. Gasket and Accel also bring quality to the table, with Performance and Racing Products available starting at $25.99, and at an average 4 stars rating. With 55 customer reviews and counting, our 1966 Buick Sportwagon Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.

    Explore Related Parts and More

    While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Fluids and Chemicals and more to make sure your 1966 Buick Sportwagon is always ready to roll. We’re committed to providing you with everything you need to keep your Sportwagon in top shape, all in one place. Start shopping confidently below for your 1966 Buick Sportwagon!

    Best-Selling Performance Ignition Products for 1966 Buick Sportwagons

    Enhance the driving experience in your Buick with 8 quality Performance Ignition Product components, starting at $17.09.

    Mallory – Unilite Ignition Module (Part No.605)

    Unilite Ignition Module

    from

    $85.29
    Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

    Product Features:
    • Service Part
    • No Moving Parts To Wear Out
    • Self Contained Unit
    • Can Drive OEM
    • Can Drive High Performance Ignition Coils
    See More

    Mallory – Mallory Kit: Unil Conv: Delco: V8 (Part No.501)

    Mallory Kit: Unil Conv: Delco: V8

    from

    $134.99
    Put an end to high maintenance point ignition systems by installing a proven Mallory Unilite ignition conversion kit. Features at a glance, improves performance and fuel efficiency, easy to install with simple hand tools, reduced maintenance and is available for all popular 12-volt negative ground domestic cars and trucks.

    Product Features:
    • Easy Installation
    • Improved Fuel Economy
    • Reduced Maintenance
    • Accurate Timing
    • Improved Performance
    • Provides A Simple Conversion
    • No Moving Parts To Wear Out
    See More

    MSD Ignition – Blaster 2 Coil: High Performance Ignition Upgrade (Part No.8202)

    Blaster 2 Coil: High Performance Ignition Upgrade

    from

    $49.99
    If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD blaster ignition, MSD 5, 6 or 7, the blaster coil line is the right choice. All of the blaster coils are designed for improved spark output. Special 100:1 windings are used to provide maximum build-up of voltage. These windings are held secure and kept cool in an oil filled metal canister. The tower assembly is molded of durable alkyd material due to its high dielectric characteristics while wide spaced brass primary terminals prevent the possibility of spark. There are several versions of the blaster coil available. All of them have the same internal specifications, but have different housings or components. Each blaster coil can be used with a stock ignition, blaster ignition, MSD 5, 6 or 7 ignition control. Most late model vehicles with electronic ignitions do not require a ballast resistor, check your ignition and manufacturers specifications to determine if a ballast is required in your application.

    Product Features:
    • Improved output coil for electronic ignitions
    • Works w/Blaster Ignition Or MSD 5/6/7 Series
    • Ballast Resistor Required If Used w/Stock Points Ignition
    • Alkyd tower w/high dielectric properties lessens carbon tracking
    See More

    Accel – Supercoil (Part No.140001)

    Supercoil

    from

    $105.99
    Engineered for faster rise time, longer spark duration and increased performance. Unique design with premium grade wire, special low resistance, high turns ratio windings. Produces higher spark energy with breakerless electronic ignition systems. For points application the supplied 0.85 ohm ballast resistor must be used in conjunction with the vehicle original ballast resistor, if so equipped. Oversized molded case with integral cooling fins and high capacity oil filled construction provide high thermal conductivity ensuring cool operation and long life. Extra tall tan Alkyd tower and integral voltage dam eliminate “flashover” to primary terminals. Comes complete with mounting hardware and 0.85 ohm ballast resistor. Effective up to 6,500 RPM.

    Product Features:
    • Oil Filled For Better Cooling
    • Optimized Low Resistance
    • Silicon Magnetic Steel E-Core
    • Higher Energy/Voltage Outputs
    • Quicker Starts
    • Improved Idle Quality
    • Resists Shock And Vibration
    • Resists Corrosion
    See More

    Mallory – Distributor Wiring Harness (Part No.29349)

    Distributor Wiring Harness

    from

    $30.49


    Product Features:
    • Service Part
    • Makes Connections Quick And Easy
    See More

    Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)

    Promaster Classic Series; Ignition Coil

    from

    $186.99
    Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).

    Product Features:
    • Glass Filled Polyester Case
    • Longer Spark Duration
    • Increased Performance
    • No Energy Loss Due To Arcing
    • Includes Brass Contact Terminal
    See More

    Mallory – Unilite Breakerless Ignition Conversion Kit (Part No.503M)

    Unilite Breakerless Ignition Conversion Kit

    from

    $176.99
    Put an end to high maintenance point ignition systems by installing a proven Mallory Unilite ignition conversion kit. Features at a glance, improves performance and fuel efficiency, easy to install with simple hand tools, reduced maintenance and is available for all popular 12-volt negative ground domestic cars and trucks.

    Product Features:
    • Easy Installation
    • Improved Fuel Economy
    • Reduced Maintenance
    • Accurate Timing
    • Improved Performance
    • Provides A Simple Conversion
    • No Moving Parts To Wear Out
    See More

    Mallory – Distributor Condenser (Part No.401)

    Distributor Condenser

    from

    $17.09
    Distributor Condenser

    Most Popular 1966 Buick Sportwagon Performance Engines

    Customize your Buick with 6 Performance Engines products like Performance Torque Converters, all priced under $825.99.

    B & M – Tork Master 3000 (Part No.20402)

    Tork Master 3000

    from

    $499.99
    Torque Converter – Tork Master 3000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: Tork Master 3000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) The Tork Master is B&M’s lowest cost performance torque converter. The Tork Master is an excellent all-around performance street converter. The best ‘value priced’ street converters available, Tork Master converters come with a new precision pump drive tube and all are pressure tested and fully balanced. The Tork Master torque converter is not recommended for big block or supercharged applications. New allow steel pump drive tube. Needle thrust bearing when factory equipped. New thrust washer between turbine and cover when required.

    Product Features:
    • New Precision Pump Drive Tube
    • Pressure Tested
    • Fully Balanced
    • Needle Thrust Bearing
    • New Thrust Washer
    • Washer Between Turbine and Cover
    See More

    B & M – Tork Master 2400 (Part No.20404)

    Tork Master 2400

    from

    $339.99
    Torque Converter – Tork Master 2400 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: Tork Master 2400 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) The Tork Master is B&M’s lowest cost performance torque converter. The Tork Master is an excellent all-around performance street converter. The best value priced street converters available, Tork Master converters come with a new precision pump drive tube and all are pressure tested and fully balanced. The Tork Master torque converter is not recommended for big block or supercharged applications. New alloy steel pump drive tube. Needle thrust bearing when factory equipped. New thrust washer between turbine and cover when required. Due to torque converter core availability, the actual converter size may vary but performance functionality will be as advertised.

    Product Features:
    • New Precision Pump Drive Tube
    • Pressure Tested
    • Fully Balanced
    • Needle Thrust Bearing
    • New Thrust Washer
    See More

    B & M – Performance Torque Converter for GM TH400, 350, & 375 Transmissions (Part No.20400)

    Performance Torque Converter for GM TH400, 350, & 375 Transmissions

    from

    $299.99
    Torque Converter – Tork Master 2000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: Tork Master 2000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) The Tork Master is B&M’s lowest cost

    Product Features:
    • New Precision Pump Drive Tube
    • Pressure Tested
    • Fully Balanced
    • Needle Thrust Bearing
    • New Thrust Washer
    See More

    B & M – Holeshot 3600 (Part No.20425)

    Holeshot 3600

    from

    $825.99
    HoleShot 3600 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: HoleShot 3600 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) A higher than stock stall speed as delivered by the Holeshot converter will provide several advantages and benefits in vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low end power and torque. The high stall converter allows the engine to launch the car at higher rpm where more torque is available. The Holeshot is generally a very good choice for the typical street machine that is looking for better launch capability and more strength. Street rods with modified engines will also benefit from a Holeshot converter. If your vehicle is equipped with a plate type nitrous system, you will need a Nitrous Holeshot!! Stall speed listings are based on engines producing 230lb. ft. of torque at 2,500 rpm. More torque at 2,500 rpm will give you more stall speed, less torque at 2,500 rpm will give you less stall speed than the stall speed ratings indicated. Furnace brazed impeller. New precision steel alloy pump drive tube. New heavy duty needle bearing between stator and impeller (not a thrust washer). Needle bearing between stator and turbine. Furnace brazed turbine. Dual pattern drive lugs on some GM Holeshots. New turbine hub. New springs and rollers in stator.

    Product Features:
    • Furnace Brazed Impeller
    • Steel Alloy Pump Drive Tube
    • Heavy Duty Needle Bearing
    • Between Stator and Turbine
    • Furnace Brazed Turbine
    • Dual Pattern Drive Lugs
    • New Turbine Hub
    • New Springs/Rollers In Stator
    See More

    B & M – Torque Converter, Nitrous Holeshot 3600 (Part No.20482)

    Torque Converter, Nitrous Holeshot 3600

    from

    $665.99
    Nitrous Holeshot Converters are Built with the same features as the other B&M Holeshots, with the addition of anti-balloon plates. The anti-balloon plates will allow these converters to stand up to the instant horsepower nitrous delivers.

    Product Features:
    • 3400-3800 RPM
    • Small And Big Blocks
    • Serious Performance
    • Furnace Brazed
    • Fully Balanced
    See More

    B & M – Holeshot 2400 (Part No.20412)

    Holeshot 2400

    from

    $499.99
    HoleShot 2400 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) Application: HoleShot 2400 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) A higher than stock stall speed as delivered by the Holeshot c

    Product Features:
    • Furnace Brazed Impeller
    • Steel Alloy Pump Drive Tube
    • Heavy Duty Needle Bearing
    • Between Stator and Turbine
    • Furnace Brazed Turbine
    See More

    Top Picks for 1966 Buick Sportwagon Performance Transmissions

    Upgrade Buick Sportwagons with top-quality Performance Transmissions parts, including 3 OEM and aftermarket selections for your 1966 model.

    B & M – Transmission Kit, Master Overhaul Kit For TH400 (Part No.21041)

    Transmission Kit, Master Overhaul Kit For TH400

    from

    $409.99
    These kits include all of the necessary components to rebuild your automatic transmission. OEM style gaskets included. Kits do not include overhaul instructions – please refer to factory shop manual for proper assembly procedures.

    Product Features:
    • Complete High Perf. Or Racing Trans. Overhaul
    • Includes Only OEM Valvebody Gaskets
    • Instructions Not Included
    See More

    B & M – Transpak For 65-87 TH400 Transmission (Part No.20228)

    Transpak For 65-87 TH400 Transmission

    from

    $141.99
    The B&M Transpak has all the features in the Shift Improver Kit, plus it provides additional driver manual control. Retain full automatic features and standard shift points with selector in Drive.

    Product Features:
    • Recalibrate Auto. Transmission
    • Optimum Performance
    • Select Your App. Mode
    • Improves Transmission Life
    • Trans. Removal Not Required
    • Downshift At Any Speed
    • Great For Trailer Towing
    • For Heavy Loads Driving Downhill
    See More

    FAG US – CUP (Part No.LM48510)

    CUP

    from

    $7.69
    CUP

    In-Demand Performance Exhaust Products for 1966 Buick Sportwagons

    Select from 1 premium Performance Exhaust Products parts for your 1966 Buick Sportwagon.

    Mr. Gasket – Alternator Bracket (Part No.9850)

    Alternator Bracket

    from

    $25.99
    Hold your alternator securely in place with Mr. Gasket chrome alternator bracket. Chrome plated heavy gauge steel for long lasting good looks. Must be used with #9852.

    Product Features:
    • Chrome Plated Steel
    • F-Style
    • Heavy Gauge Steel Construction
    • Fits Small Block Chevy 265-400 CID
    • Must Be Used With Part 9852
    See More

    Most Sold 1966 Buick Sportwagon Performance Distributors

    Explore our best-selling Buick parts for the 1966 Sportwagon among 2 OEM and aftermarket options starting from $48.49.

    Accel – Distributor Cap And Rotor Kit (Part No.8124)

    Distributor Cap And Rotor Kit

    from

    $48.49


    Product Features:
    • Heavy Duty Cap and Rotor Kit
    • With Brass Inserts
    See More

    MSD Ignition – Distributor; Buick V8 215-350 Pro-Billet (Part No.8548)

    Distributor; Buick V8 215-350 Pro-Billet

    from

    $593.99
    MSD Pro-Billet Distributors are the finest performance and racing distributors available. Every feature has been engineered to endure the rigors of high performance and racing engines. Whether cruising the streets or racing stock cars, dragsters, boats or trucks, MSD has a distributor for it. MSD uses state-of-the-art, Computer Numerical Controlled (CNC) mills and lathes to machine each housing. After a long series of precise cuts and movements, the billet is formed into a flawless distributor housing that is accurate to within 0.001″. The flex-free housings are lightweight, have no porosity or weak areas and look great on polished, show quality engines.

    Product Features:
    • CNC machined billet aluminum housing and billet aluminum base
    • Must Be Used w/An MSD Ignition Control
    • Supplied w/HEI style distributor cap/rotor (accepts Cap-A-Dapts)
    • Mech. advance assem. can be locked out for crank trigger systems
    • Advance plate and weights are fine blanked from chrome moly steel
    • QPQ coated for friction reduction
    • QPQ coated polished steel shaft; guided by sealed ball bearings
    • Easy-to-adjust mech. advance w/supplied springs and stop bushings
    See More

    Top-Rated Performance and Racing Products Brands For Your 1966 Buick Sportwagon

    Shop for the best-rated brands offering Performance and Racing Products and other products for your 1966 Buick Sportwagons. Below you’ll find some of our best rated Performance and Racing Products from Mallory, Mr. Gasket, and Accel, and more. Performance and Racing Products from these brands that fit a 1966 Sportwagon start at just $17.09 and are rated as high as 5 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.

    Popular Mallory 1966 Buick Sportwagon Performance and Racing Products

    When it comes to maintaining or upgrading your 1966 Buick Sportwagon, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. Mallory ticks all of those boxes. We offer a wide selection of Mallory Performance and Racing Products, specifically designed for the 1966 Buick Sportwagon. With over 6 Mallory brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $17.09, with an average price of just $105.31. Plus, with over 4 customer reviews and an average rating of 5 stars, you can trust that our Mallory Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

    Promaster Classic Series; Ignition Coil
    from
    $186.99
    This product is not rated

    Promaster Classic Series; Ignition Coil

    “”

    Unilite Breakerless Ignition Conversion Kit
    from
    $176.99
    This product is not rated

    Unilite Breakerless Ignition Conversion Kit

    “”

    Distributor Wiring Harness
    from
    $30.49
    This product is not rated

    Distributor Wiring Harness

    “”

    Popular Mr. Gasket 1966 Buick Sportwagon Performance and Racing Products

    Mr. Gasket auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1966 Buick Sportwagon owner should feel confident when installing genuine Mr. Gasket parts in their vehicle. To ensure the best fit and performance for your 1966 Sportwagon, Advance Auto Parts carries a full inventory of 2 Mr. Gasket Performance and Racing Products. Plus you will be keeping your Buick in peak condition while saving money because prices on these Mr. Gasket Performance and Racing Products range from $25.99 to $48.09, plus, with more than 2 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.

    Alternator Bracket
    from
    $25.99

    (2)

    Alternator Bracket

    “F bracket broke after less than 1000 miles. It snapped off one of the mouting tabs. Now I get to bust and scrape knuckles again to get it out and fin”

    Thermocap Radiator Cap
    from
    $48.09
    This product is not rated

    Thermocap Radiator Cap

    “”

    FAQs for 1966 Buick Sportwagon Performance and Racing Products

    Which Performance and Racing Products are best-sellers for 1966 Buick Sportwagons?

    Out of 58 Performance and Racing Products that fit 1966 Buick Sportwagons, the following parts are the top sellers:

    What’s the price range for 1966 Buick Sportwagon Performance and Racing Products?

    Performance and Racing Product prices for the 1966 Buick Sportwagon start at $7.69 and go up to $1,138.99 for the most premium parts.

    What’s the average price of a Performance and Racing Product for a 1966 Buick Sportwagon?

    The average price for Performance and Racing Products for the 1966 Buick Sportwagon is $425.70. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.

    Does Advance Auto Parts sell Performance and Racing Products for other Buick Sportwagon model years?

    Yes, we currently carry Performance and Racing Products for 8 model years of Buick Sportwagons between 1964 and 1972. Performance and Racing Products are bought most frequently for the following model years: 1972, 1971, 1970, 1969, 1968, 1967, 1965, and 1964.

    What are the cheapest Performance and Racing Products for my 1966 Buick Sportwagon?

    The cheapest 1966 Buick Sportwagon Performance and Racing Products we carry in stock are:

    What types of Performance and Racing Products do you sell for my 1966 Buick Sportwagon?

    Can I get help with 1966 Buick Sportwagon Performance and Racing Product orders?

    Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Buick Performance and Racing Products and more.

    What is your return policy for Buick Sportwagon Performance and Racing Products?

    Advance Auto Parts keeps returns simple. For new Buick Sportwagon Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.