1966 Avanti II Performance and Racing Products
Find Your Specific 1966 Avanti II Performance and Racing Products
Below you will find various in-demand Avanti Performance and Racing Products, components and accessories for your 1966 II. Advance Auto Parts has popular II parts like Performance Fuel Systems, Performance Ignition Products, Performance Engines and more. You’ll also find aftermarket and OEM Performance and Racing Products for other II model years including
1987,
1988,
1989,
1990,
1991,
2001,
2002,
2003,
2004 and more. Select a category of 1966 Avanti II Performance and Racing Products below and start saving instantly.
Popular 1966 Avanti II Performance and Racing Products Categories
Essential Performance and Racing Products for 1966 Avanti IIs
FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1603)
from
$31.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Blue Stripe performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
- Not intended for use in emission controlled vehicles.
FEL-PRO Performance – PERFORMANCE VALVE COVER GASKET SET (Part No.1602)
from
$23.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Die cut silicone rubber gaskets conform to out-of-flat covers
- Great for on-again/off-again situations
- Not intended for use in emission controlled vehicles.
B & M – Holeshot 3000 (Part No.20413)
from
$899.99
HoleShot 3000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: HoleShot 3000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) A higher than stock stall speed as delivered by the Holeshot c
Product Features:
See More
Product Features:
- Furnace Brazed Impeller
- Steel Alloy Pump Drive Tube
- Heavy Duty Needle Bearing
- Between Stator and Turbine
- Furnace Brazed Turbine
B & M – Traveler Converter (Part No.30423)
from
$475.99
Torque Converter – Traveler Converter (SUV and Light Truck) for GM 1968 to 1981 TH350, TH375B APPLICATION: GM 1968 to 1981 TH350, TH375B (6) (will not fit TH-350C) Provides slightly higher stall speed than stock to improve pulling power at low speeds. New
Product Features:
See More
Product Features:
- Ideal For Motor Homes
- Ideal For Towing Applications
- Precision Pump Drive Tube
- Heavy Duty Needle Bearings
- Furnace Brazed
Holley – Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny (Part No.0-80457S)
from
$499.99
Holley’s new 0-80457SA is constructed from aluminum which compared to its zinc counterpart equates to a weight savings of 40%! Holley’s aluminum 0-80457SA will hold its shine longer and also can be hand polished for a custom look! Its 600 CFM of airflow,
Product Features:
See More
Product Features:
- Vibratory Polished For Good Looks
Holley – Prem Street Carbs (Avengers) (Part No.0-80570)
from
$699.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.
Product Features:
See More
Product Features:
- Vibratory Polished For Good Looks
- Optimized Street Calibration That Works Out Of The Box
- Factory Preset Electric Choke For Easy Startups
- Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
- No Unnecessary Trips Back To The Parts Store
- Limited Lifetime Warranty
- 100% Wet-Flow Tested To Assure It Arrives Ready To Run
- Street Ready; Out Of The Box
Competition Cams – Mutha’ Thumpr 235/249 Hydraulic Roller Cam and Lifter Kit (Part No.CL12-601-8)
from
$1152.99
Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods.
Product Features:
See More
Product Features:
- Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
- Best with aftermarket converters and more rear gear.
- Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.
Competition Cams – XE Computer Control 206/212 Hydraulic Flat Cam/Lifter Kit (Part No.CL12-249-4)
from
$390.99
SMALL BLOCK CHEVY HYDRAULIC CAM AND LIFTER KIT – Xtreme Energy Computer Controlled: Great in throttle body, crossfire or carbureted engine and 305 TPI.
Product Features:
See More
Product Features:
- Cam and lifter kit for Small Block Chevy engines
- CL-Kit includes cam, lifters, assembly lube, instructions and decals
- HYDRAULIC – Xtreme Energy Computer Controlled: Great in throttle body, crossfire or carbureted engine and 305 TPI.
- 249/260 Advertised Duration, 206/212 Duration @ .050″, .434″/.444″ Lift, 112 Lobe Separation
- Valve spring upgrade required
FEL-PRO Performance – Engine Crankshaft Seal Kit (Part No.2919)
from
$37.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Fluoroelastomer compound combines optimum resistance to heat, oils and abrasion for longivity.
- Optimizes performance under high crankcase vacuum conditions, elevated temperatures and high RPM levels.
- Not intended for use in emission controlled vehicles.
FEL-PRO Performance – Engine Crankshaft Seal Kit (Part No.2912)
from
$37.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Fluoroelastomer compound combines optimum resistance to heat, oils and abrasion for longevity.
- Optimizes performance under high crankcase vacuum conditions, elevated temperatures and high RPM levels.
- Not intended for use in emission controlled vehicles.
- Not intended for use in emission controlled vehicles.
Competition Cams – VALVE SPRING KIT, FOR LS 1.310" BEEHIVE 1 KT (Part No.26918CS-KIT)
from
$528.99
This Beehive Valve Spring Kit for LS engines is designed for hydraulic roller cams and includes carefully matched Beehive Springs, steel retainers, locks, seals and spring seats. With a .625″ maximum lift, these Beehive Valve Springs deliver increased valve train stability and a much lighter valve train. This is achieved with less spring pressure for better valve control and reduced weight of both the spring and retainer. The unique Beehive shape handles valve train stress more efficiently to eliminate damaging harmonics and increases high RPM horsepower and durability. The oval/multi-arc wire shape places the maximum area of the wire at the point of highest stress to handle valve train stress more efficiently and allow better heat dissipation for longer life.Kit Includes:26918-16 Beehive Valve Springs774-16 Steel Retainers623-16 7° Steel Valve Locks511-16 Valve Seals4705-16 Spring Seats
Product Features:
See More
Product Features:
- Kit includes part #26918-16 Beehive valve springs and matching steel retainers, 7° valve locks, valve seals and spring seats
- Kits designed for hydraulic roller cams
- .625″ maximum lift springs
Edelbrock – Complete Sure Seat Valve Spring Kit for Chevy 262-400 V8 1957-95 (Part No.5894)
from
$155.99
Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks are black oxide coated. Non-rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.
Product Features:
See More
Product Features:
- Complete Kit: Includes Retainers And Locks
- Springs Made of Highest Quality Spring Wire
- Springs Precision Wound To Close Tolerances
- Includes Superior Quality Steel Retainers
- Includes 7 deg. Heat-Treated Valve Stem Locks
- Retainers and Locks Black Oxide Coated
- Dyno Tested And Street Proven
- Great Match to Edelbrock Camshaft Kit
MSD Ignition – Trigger Wheel; Flying Magnet; Small Block Chevy (Part No.8611)
from
$316.99
For a long time, racers have known that one of the best things to do to an engine to improve its performance is to stabilize the ignition timing. The MSD flying magnet crank trigger system does exactly that by using magnets embedded in an aluminum wheel. The MSD flying magnet crank trigger uses four magnets secured in the aluminum trigger wheel that pass by a stationary non-magnetic pick-up to trigger the ignition. This flying magnet design produces accurate trigger signals and the non-magnetic pick-up cannot be false triggered. Each flying magnet crank trigger includes a two-piece mounting bracket for the non-magnetic pick-up that in most cases will work on either the passenger side or driver’s side of the engine (the SB Chrysler and SB Ford brackets mount on only one side). The adjustable bracket provides a wide range of timing adjustment and spacers are included. These systems will trigger MSD 6, 7, 8 and 10 series ignitions and all MSD timing accessories.
Product Features:
See More
Product Features:
- Replacement crank trigger wheel for small block Chevy
- Absolutely the most accurate way to trigger the ignition
- The non-magnetic pickup cannot be false triggered
- Powerful magnets are embedded in a billet aluminum trigger wheel
Edelbrock – Cylinder Head Gasket Set for Chevrolet (Part No.7310)
from
$61.99
Product Features:
See More
- 4.125 in. Cylinder Bore Diameter
- 0.039 in. Thickness
- 8.7cc Volume
- Charcoal Color
- Two Piece Configuration
FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1010)
from
$51.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
- NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
- SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
- STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1886)
from
$63.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Rigid core, molded silicone rubber gaskets utilize the one-piece molded rubber technology for a perfect fit, ease of installation and include compression limiters to prevent overtightening.
- Not intended for use in emission controlled vehicles.
FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1818)
from
$27.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
- With steel core to provide ultimate excellent blowout resistance.
- Not intended for use in emission controlled vehicles.
Edelbrock – Torker II Intake Manifold Small-Block Chevy (Part No.5001)
from
$281.99
2500-6500 RPM high-performance street engines. Single-plane low-rise intake good for high RPM. Ideal for applications with limited hood clearance. For top-end HP and adequate throttle response. Not for mileage or emissions applications. For trucks or vans use PN(2701) instead. Not for LT1 or Chevy bowtie heads. Not for 1987 and later stock aluminum heads. Available in cast or polished.
Product Features:
See More
Product Features:
- 2500 to 6500 RPM High Performance Street Engines
- Single-Plane Low-Rise Intake Good for High RPM
- Ideal for Applications with Limited Hood Clearance
- For Top-End HP and Adequate Throttle Response
- Not for Mileage or Emissions Applications
- For Trucks or Vans Use PN[2701] Instead
- Not for LT1 or Chevy Bowtie Heads
- Not for 1987 and Later Stock Aluminum Heads
Edelbrock – Performer EPS Intake Manifold for 1955-86 Small-Block Chevy (Part No.2701)
from
$195.99
Edelbrock part No. 2701 Performer EPS intake manifold is designed for 1986 and earlier 262-400 cubic-inch Chevys. Edelbrock’s Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response. With that the Edelbrock Performer EPS intake manifold has a runner design that’s “tuned” for peak torque at 3500 rpm on a 350-inch engine making it ideal for power from off-idle to 5500 rpm. Dyno tests showed gains of 5 hp and 9 ft-lbs. of torque over the Edelbrock Performer manifold No. 2101 on a 350 Chevy. From 3000 to 4500 rpm, the power increases averaged 5+ ft-lbs. of torque for more performance where you need it most. PLEASE NOTE: Will not fit under stock Corvette hood!
Product Features:
See More
Product Features:
- Maximizes Performance with Edelbrock Carburetors
- Runners Tuned to Match Square Bore Carburetor
- Maximizes Peak Torque Around 3500 RPM
- Excellent Throttle Response and Mid-Range Power
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 deg. Firing Order
- Prod. +5 HP and +9 ft/lbs. of Torque Over PN[2101]
- PLEASE NOTE: Will not fit under stock Corvette hood!
Competition Cams – XFI RPM 212/218 Hydraulic Roller Cam (Part No.54-412-11)
from
$541.99
Designed to take advantage of the GM LS engine’s larger camshaft journal diameter, the XFI RPM camshaft line takes Xtreme Energy technology to deliver excellent power.
Product Features:
See More
Product Features:
- Designed with Xtreme Energy technology to provide excellent power with the LS engine’s enhanced cylinder head design and high RPM potential.
- Takes advantage of the LS engine’s larger journal diameter, base circle and 1.7+ rocker arm ratio.
- Provides outstanding low RPM torque with increased stability.
Competition Cams – XFI XE-R 224/230 Hydraulic Roller Cam (Part No.54-444-11)
from
$541.99
HYDRAULIC ROLLER – XFI XE-R: High rpm street/strip with XE-R lobe designs. Requires custom tuning.
Product Features:
See More
Product Features:
- HYDRAULIC ROLLER – XFI XE-R: High rpm street/strip with XE-R lobe designs. Requires custom tuning.
- 273/279 Advertised Duration, 224/230 Duration @ .050″, .581″/.588″ Lift, 114 Lobe Separation
- Use Beehive Valve Spring part No. 26918-16 with this camshaft
Competition Cams – Big Mutha’ Thumpr 243/257 Hydraulic Roller Cam (Part No.12-602-8)
from
$549.99
Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods.
Product Features:
See More
Product Features:
- Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
- Best with aftermarket converters and more rear gear.
- Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.
FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1438)
from
$35.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
- Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
- Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
- Slotted bolt holes allow for easier header installation.
- Not intended for use in emission controlled vehicles.
FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1444)
from
$31.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
- Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
- Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
- Slotted bolt holes allow for easier header installation.
- Not intended for use in emission controlled vehicles.
FEL-PRO Performance – Engine Timing Cover Gasket (Part No.2335)
from
$21.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Steel core gasket construction
- Exclusive design permits significantly faster gasket installation while eliminating potential sealing leak paths.
- Not intended for use in emission controlled vehicles.
Upgrade your 1966 Avanti II with Top-Quality Performance and Racing Products
When it comes to maintaining or upgrading your 1966 Avanti II, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Avanti or enhancing its overall performance, Performance and Racing Products are key to keeping your II functioning at its best. At Advance Auto Parts, we offer a wide selection of 46 Performance and Racing Products for the 1966 Avanti II, designed to meet your needs without breaking the bank.
From
Performance Fuel System
replacements to
Performance Ignition Products
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1966 Avanti II at great prices.
Our Performance and Racing Products inventory for this model
ranges from just $21.99 to $1,645.99, with
an average price of $437.71.
Our 46 Performance and Racing Products in stock come from 6 trusted brands, so you’re sure to find the right part for your 1966 Avanti II without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1966 Avanti II, we stock popular OEM and aftermarket Performance and Racing Products from top names
like Edelbrock, FEL-PRO Performance, Holley, and more.
Edelbrock Performance and Racing Products
start at just $64.99 and boast an impressive 4.4 stars average rating from customers.
FEL-PRO Performance and Holley also bring quality to the table, with Performance and Racing Products available starting at $31.49, and at an average 4.2 stars rating.
With 86 customer reviews and counting, our 1966 Avanti II Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Fluids and Chemicals, Wipers and Related Products
and more to make sure your 1966 Avanti II is always ready to roll. We’re committed to providing you with everything you need to keep your II in top shape, all in one place.
Start shopping confidently below for your 1966 Avanti II!
Best-Selling Performance Fuel Systems for 1966 Avanti IIs
Enhance the driving experience in your Avanti with 4 quality Performance Fuel System components, starting at $499.99.
Holley – Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny (Part No.0-80457S)
from
$499.99
Holley’s new 0-80457SA is constructed from aluminum which compared to its zinc counterpart equates to a weight savings of 40%! Holley’s aluminum 0-80457SA will hold its shine longer and also can be hand polished for a custom look! Its 600 CFM of airflow,
Product Features:
See More
Product Features:
- Vibratory Polished For Good Looks
Holley – Street Carburetor: 670 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny (Part No.0-80670)
from
$682.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.
Product Features:
See More
Product Features:
- Vibratory Polished For Good Looks
- Optimized Street Calibration That Works Out Of The Box
- Factory Preset Electric Choke For Easy Startups
- Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
- No Unnecessary Trips Back To The Parts Store
- Limited Lifetime Warranty
- 100% Wet Flow Tested By Holley Technicians
- Arrives Ready To Run
Holley – Prem Street Carbs (Avengers) (Part No.0-80870)
from
$699.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.
Product Features:
See More
Product Features:
- Vibratory Polished For Good Looks
- Optimized Street Calibration That Works Out Of The Box
- Factory Preset Electric Choke For Easy Startups
- Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
- No Unnecessary Trips Back To The Parts Store
- Limited Lifetime Warranty
- 100% Wet Flow Tested By Holley Technicians
- Arrives Ready To Run
Holley – Prem Street Carbs (Avengers) (Part No.0-80570)
from
$699.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.
Product Features:
See More
Product Features:
- Vibratory Polished For Good Looks
- Optimized Street Calibration That Works Out Of The Box
- Factory Preset Electric Choke For Easy Startups
- Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
- No Unnecessary Trips Back To The Parts Store
- Limited Lifetime Warranty
- 100% Wet-Flow Tested To Assure It Arrives Ready To Run
- Street Ready; Out Of The Box
Most Popular 1966 Avanti II Performance Ignition Products
Customize your Avanti with 1 Performance Ignition Products products
like Performance Ignition Systems, all
priced under $316.99.
MSD Ignition – Trigger Wheel; Flying Magnet; Small Block Chevy (Part No.8611)
from
$316.99
For a long time, racers have known that one of the best things to do to an engine to improve its performance is to stabilize the ignition timing. The MSD flying magnet crank trigger system does exactly that by using magnets embedded in an aluminum wheel. The MSD flying magnet crank trigger uses four magnets secured in the aluminum trigger wheel that pass by a stationary non-magnetic pick-up to trigger the ignition. This flying magnet design produces accurate trigger signals and the non-magnetic pick-up cannot be false triggered. Each flying magnet crank trigger includes a two-piece mounting bracket for the non-magnetic pick-up that in most cases will work on either the passenger side or driver’s side of the engine (the SB Chrysler and SB Ford brackets mount on only one side). The adjustable bracket provides a wide range of timing adjustment and spacers are included. These systems will trigger MSD 6, 7, 8 and 10 series ignitions and all MSD timing accessories.
Product Features:
See More
Product Features:
- Replacement crank trigger wheel for small block Chevy
- Absolutely the most accurate way to trigger the ignition
- The non-magnetic pickup cannot be false triggered
- Powerful magnets are embedded in a billet aluminum trigger wheel
Top Picks for 1966 Avanti II Performance Engines
Upgrade Avanti IIs with top-quality Performance Engines parts, including 40 OEM and aftermarket selections for your 1966 model.
Edelbrock – Performer EPS Intake Manifold for 1955-86 Small-Block Chevy (Part No.2701)
from
$195.99
Edelbrock part No. 2701 Performer EPS intake manifold is designed for 1986 and earlier 262-400 cubic-inch Chevys. Edelbrock’s Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response. With that the Edelbrock Performer EPS intake manifold has a runner design that’s “tuned” for peak torque at 3500 rpm on a 350-inch engine making it ideal for power from off-idle to 5500 rpm. Dyno tests showed gains of 5 hp and 9 ft-lbs. of torque over the Edelbrock Performer manifold No. 2101 on a 350 Chevy. From 3000 to 4500 rpm, the power increases averaged 5+ ft-lbs. of torque for more performance where you need it most. PLEASE NOTE: Will not fit under stock Corvette hood!
Product Features:
See More
Product Features:
- Maximizes Performance with Edelbrock Carburetors
- Runners Tuned to Match Square Bore Carburetor
- Maximizes Peak Torque Around 3500 RPM
- Excellent Throttle Response and Mid-Range Power
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 deg. Firing Order
- Prod. +5 HP and +9 ft/lbs. of Torque Over PN[2101]
- PLEASE NOTE: Will not fit under stock Corvette hood!
FEL-PRO Performance – Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (Part No.1003)
from
$42.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
- NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
- SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
- STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1004)
from
$44.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
- Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
- Raises combustion sealing force to roughly three times that of standard head gaskets.
- Steel wire rings for the greatest combustion seal strength.
- Not intended for use in emission controlled vehicles.
FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1603)
from
$31.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Blue Stripe performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
- Not intended for use in emission controlled vehicles.
Edelbrock – Sure Seat Valve Springs for Chevy 262-400 V8 1957-95 (Part No.5802)
from
$64.99
Springs made of highest quality spring wire. Springs precision wound to close tolerances. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.
Product Features:
See More
Product Features:
- For Use With Cast Iron Heads
- Springs Made of Highest Quality Spring Wire
- Springs Precision Wound To Close Tolerances
- Use with Original Equipment Heads Only
Edelbrock – Complete Sure Seat Valve Spring Kit for Chevy 262-400 V8 1957-95 (Part No.5794)
from
$159.99
Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks are black oxide coated. Non-rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.
Product Features:
See More
Product Features:
- Complete Kit: Includes Retainers And Locks
- Springs Made of Highest Quality Spring Wire
- Springs Precision Wound To Close Tolerances
- Includes Superior Quality Steel Retainers
- Includes 7 deg. Heat-Treated Valve Stem Locks
- Retainers and Locks Black Oxide Coated
- Non-Rotator Style: Dyno Tested and Street Proven
- Great Match to Edelbrock Camshaft Kit
FEL-PRO Performance – PERFORMANCE VALVE COVER GASKET SET (Part No.1602)
from
$23.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Die cut silicone rubber gaskets conform to out-of-flat covers
- Great for on-again/off-again situations
- Not intended for use in emission controlled vehicles.
B & M – Tork Master 2400 (Part No.20404)
from
$373.99
Torque Converter – Tork Master 2400 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: Tork Master 2400 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) The Tork Master is B&M’s lowest cost performance torque converter. The Tork Master is an excellent all-around performance street converter. The best value priced street converters available, Tork Master converters come with a new precision pump drive tube and all are pressure tested and fully balanced. The Tork Master torque converter is not recommended for big block or supercharged applications. New alloy steel pump drive tube. Needle thrust bearing when factory equipped. New thrust washer between turbine and cover when required. Due to torque converter core availability, the actual converter size may vary but performance functionality will be as advertised.
Product Features:
See More
Product Features:
- New Precision Pump Drive Tube
- Pressure Tested
- Fully Balanced
- Needle Thrust Bearing
- New Thrust Washer
Edelbrock – Performer-Plus Camshaft Kit for 1957-86 Small-Block Chevrolet (Part No.2102)
from
$302.99
Product Features:
See More
- Designed for Optimum Torque and Acceleration
- Maximum Performance From Idle through Mid-Range
- Matched to Edelbrock Performer Intakes
- Includes Hydraulic Lifters and Assembly Lube
- Major Improvement in Throttle Response and Torque
- Use For Daily Drivers/Trucks/Vans/RVs/4x4s
- Take The Guesswork Out Of Camshaft Selection
Competition Cams – Big Mutha’ Thumpr 243/257 Hydraulic Flat Cam/Lifter Kit (Part No.CL12-602-4)
from
$914.99
SMALL BLOCK CHEVY HYDRAULIC CAM AND LIFTER KIT – Big Mutha’ Thumpr: Street/strip, needs 9.5:1 compression, 2800+ stall, intake, gears and headers, very rough idle.
Product Features:
See More
Product Features:
- Cam and lifter kit for Small Block Chevy engines
- CL-Kit includes cam, lifters, assembly lube, instructions and decals
- HYDRAULIC – Big Mutha’ Thumpr: Street/strip, needs 9.5:1 compression, 2800+ stall, intake, gears and headers, very rough idle.
- 295/313 Advertised Duration, 243/257 Duration @ .050″, .500″/.486″ Lift, 107 Lobe Separation
- Valve spring upgrade required
Competition Cams – High Energy/Marine 218/218 Hydraulic Flat Cam/Lifter Kit (Part No.CL12-210-2)
from
$898.99
SMALL BLOCK CHEVY HYDRAULIC CAM AND LIFTER KIT – High Energy: Good street performance with stock converter, choppy idle. OR High Energy Marine: Biggest cam for inboard/outboard. Good for ski, economy and light performance.
Product Features:
See More
Product Features:
- Cam and lifter kit for Small Block Chevy engines
- CL-Kit includes cam, lifters, assembly lube, instructions and decals
- HYDRAULIC – High Energy: Good street performance with stock converter, choppy idle. OR High Energy Marine: Biggest cam for inboard/outboard. Good for ski, economy and light performance.
- 268/268 Advertised Duration, 218/218 Duration @ .050″, .454″/.454″ Lift, 110 Lobe Separation
- Valve spring upgrade required
FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1010)
from
$51.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
- NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
- SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
- STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
Edelbrock – Torker II Intake Manifold Small-Block Chevy (Part No.5001)
from
$281.99
2500-6500 RPM high-performance street engines. Single-plane low-rise intake good for high RPM. Ideal for applications with limited hood clearance. For top-end HP and adequate throttle response. Not for mileage or emissions applications. For trucks or vans use PN(2701) instead. Not for LT1 or Chevy bowtie heads. Not for 1987 and later stock aluminum heads. Available in cast or polished.
Product Features:
See More
Product Features:
- 2500 to 6500 RPM High Performance Street Engines
- Single-Plane Low-Rise Intake Good for High RPM
- Ideal for Applications with Limited Hood Clearance
- For Top-End HP and Adequate Throttle Response
- Not for Mileage or Emissions Applications
- For Trucks or Vans Use PN[2701] Instead
- Not for LT1 or Chevy Bowtie Heads
- Not for 1987 and Later Stock Aluminum Heads
Edelbrock – Sure Seat Valve Springs for S/B Chevy O.E Cast iron Cylinder Heads (Part No.5703)
from
$69.99
Springs made of highest quality spring wire. Springs precision wound to close tolerances. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.
Product Features:
See More
Product Features:
- For Use With Cast Iron Heads
- Springs Made of Highest Quality Spring Wire
- Springs Precision Wound To Close Tolerances
- Use with Original Equipment Heads Only
FEL-PRO Performance – Engine Timing Cover Gasket (Part No.2335)
from
$21.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Steel core gasket construction
- Exclusive design permits significantly faster gasket installation while eliminating potential sealing leak paths.
- Not intended for use in emission controlled vehicles.
B & M – Performance Torque Converter for GM TH400, 350, & 375 Transmissions (Part No.20400)
from
$329.99
Torque Converter – Tork Master 2000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: Tork Master 2000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) The Tork Master is B&M’s lowest cost
Product Features:
See More
Product Features:
- New Precision Pump Drive Tube
- Pressure Tested
- Fully Balanced
- Needle Thrust Bearing
- New Thrust Washer
Competition Cams – Xtreme Energy 230/236 Hydraulic Flat Cam (Part No.12-246-3)
from
$258.99
HYDRAULIC – Xtreme Energy: Very strong mid-range torque and throttle response, 2200+ stall.
Product Features:
See More
Product Features:
- HYDRAULIC – Xtreme Energy: Very strong mid-range torque and throttle response, 2200+ stall.
- 274/286 Advertised Duration, 230/236 Duration @ .050″, .490″/.490″ Lift, 110 Lobe Separation
- Valve spring upgrade required
- Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.
Competition Cams – Magnum 224/224 Hydraulic Flat Cam (Part No.12-211-2)
from
$254.99
HYDRAULIC – Magnum: High performance. Biggest cam with stock converter but better with 2000+ stall. Use lower gears. Mild rough idle.
Product Features:
See More
Product Features:
- HYDRAULIC – Magnum: High performance. Biggest cam with stock converter but better with 2000+ stall. Use lower gears. Mild rough idle.
- 270/270 Advertised Duration, 224/224 Duration @ .050″, .470″/.470″ Lift, 110 Lobe Separation
- Valve spring upgrade required
- Can be used with mild ratio rocker arms and traditional performance valve springs.
Edelbrock – Performer EPS Intake Manifold w/ Oil Fill Tube for 1955-86 Small-Block Chevy (Part No.2703)
from
$339.99
Edelbrock part #2703 Performer EPS intake manifold is designed for 1986 and earlier 262-400 cubic-inch Chevys. Edelbrock’s Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent thro
Product Features:
See More
Product Features:
- Idle-5500 RPM Range
- Dual Plane Type-4150 Style Flange
- 3.74 in. Front Height, 4.27 in. Center Height, 4.8 in. Rear Height
- Satin Finish
- Non-EGR W/ Oil Fill Tube
FEL-PRO Performance – Oil Pan Gasket Set: High-Temperature Rubber-Coated Fiber, 5 Piece Set (Part No.1802)
from
$25.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
- With steel core to provide ultimate excellent blowout resistance.
- Not intended for use in emission controlled vehicles.
Edelbrock – Rollin’ Thunder Camshaft Kit for 1957-86 Small-Block Chevy V8 (Part No.22015)
from
$1645.99
Edelbrock part #22015 Rollin’ Thunder camshaft kit is designed for 1957-86 small-block Chevy V-8 applications. This complete cam kits include an Edelbrock Rollin’ Thunder hydraulic roller camshaft, hydraulic roller lifters and pushrods. The Rollin’ Thunde
Product Features:
See More
Product Features:
- Iron Camshaft Material
- 0.539 in. Intake Valve Lift with Factory Rocker Arm Ratio
- Roller Lifter Type
- Valve Springs Required
- Assembly Lubricant Included
Competition Cams – High Energy 206/206 Hydraulic Flat Cam K-Kit (Part No.K12-205-2)
from
$1201.99
Ideal for use with mainly stock components like rocker arms, intake manifolds, cylinder heads, compression ratio, torque converters and rear gear ratios, the High Energy camshaft grind family is a great choice for street performance applications.
Product Features:
See More
Product Features:
- Good blend of efficiency and performance.
- Perfect choice for performance street rebuilds.
- Work well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.
Competition Cams – Mutha’ Thumpr 235/249 Hydraulic Roller Cam and Lifter Kit (Part No.CL12-601-8)
from
$1152.99
Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods.
Product Features:
See More
Product Features:
- Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
- Best with aftermarket converters and more rear gear.
- Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.
Competition Cams – Big Mutha’ Thumpr 243/257 Hydraulic Roller Cam/Lifter Kit (Part No.CL12-602-8)
from
$1152.99
Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods.
Product Features:
See More
Product Features:
- Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
- Best with aftermarket converters and more rear gear.
- Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.
In-Demand Performance Exhaust Products for 1966 Avanti IIs
Select from 1 premium Performance Exhaust Products parts for your 1966 Avanti II.
FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1444)
from
$31.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
- Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
- Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
- Slotted bolt holes allow for easier header installation.
- Not intended for use in emission controlled vehicles.
Top-Rated Performance and Racing Products Brands For Your 1966 Avanti II
Shop for the best-rated brands offering Performance and Racing Products and other products for your 1966 Avanti IIs. Below you’ll find some of our best rated Performance and Racing Products from Edelbrock, FEL-PRO Performance, and Holley, and more. Performance and Racing Products from these brands that fit a 1966 II start at just $31.49 and are rated as high as 4.4 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.
Popular Edelbrock 1966 Avanti II Performance and Racing Products
When it comes to maintaining or upgrading your 1966 Avanti II, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. Edelbrock ticks all of those boxes. We offer a wide selection of Edelbrock Performance and Racing Products, specifically designed for the 1966 Avanti II. With over 3 Edelbrock brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $64.99, with an average price of just $140.32. Plus, with over 10 customer reviews and an average rating of 4.4 stars, you can trust that our Edelbrock Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$195.99
(7)
Performer EPS Intake Manifold for 1955-86 Small-Block Chevy
“Removed a Weiand Stealth manifold and replaced with the Edelbrock, while doing a dyno test – increased HP & Torque on a modified 350, very good for st”
from
$159.99
(1)
Complete Sure Seat Valve Spring Kit for Chevy 262-400 V8 1957-95
“Excellent product.”
from
$64.99
(2)
Sure Seat Valve Springs for Chevy 262-400 V8 1957-95
“Used with the smallest Comp Thumpr Cam, good to 5500 RPM, Cost is great, No valve float. I would use again with a samll to medium cam and 416 heads.”
Popular FEL-PRO Performance 1966 Avanti II Performance and Racing Products
FEL-PRO Performance auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1966 Avanti II owner should feel confident when installing genuine FEL-PRO Performance parts in their vehicle. To ensure the best fit and performance for your 1966 II, Advance Auto Parts carries a full inventory of 3 FEL-PRO Performance Performance and Racing Products. Plus you will be keeping your Avanti in peak condition while saving money because prices on these FEL-PRO Performance Performance and Racing Products range from $31.49 to $44.99, plus, with more than 4 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.
FAQs for 1966 Avanti II Performance and Racing Products
Which Performance and Racing Products are best-sellers for 1966 Avanti IIs?
Out of 46 Performance and Racing Products that fit 1966 Avanti IIs, the following parts are the top sellers:
- Performer EPS Intake Manifold for 1955-86 Small-Block Chevy (17340006) – $195.99
- Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (5189543) – $42.49
- Exhaust Manifold Gasket Set (5990955) – $31.49
What’s the price range for 1966 Avanti II Performance and Racing Products?
Performance and Racing Product prices for the 1966 Avanti II start at $21.99 and go up to $1,645.99 for the most premium parts.
What’s the average price of a Performance and Racing Product for a 1966 Avanti II?
The average price for Performance and Racing Products for the 1966 Avanti II is $437.71. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Performance and Racing Products for other Avanti II model years?
What are the cheapest Performance and Racing Products for my 1966 Avanti II?
The cheapest 1966 Avanti II Performance and Racing Products we carry in stock are:
- Engine Timing Cover Gasket (21021905) – $21.99
- PERFORMANCE VALVE COVER GASKET SET (5189713) – $23.99
- Oil Pan Gasket Set: High-Temperature Rubber-Coated Fiber, 5 Piece Set (19781150) – $25.99
- Exhaust Manifold Gasket Set (5990955) – $31.49
- Engine Valve Cover Gasket Set (5992664) – $31.99
What are the top-rated Performance and Racing Products that fit the 1966 Avanti II?
Out of 86 reviews by customers, our 1966 Avanti II Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1966 Avanti II and their top-rated products:
- Performance Exhaust Products
- Exhaust Manifold Gasket Set (5990955) – $31.49
- Performance Engines
- Exhaust Manifold Gasket Set (5990955) – $31.49
What types of Performance and Racing Products do you sell for my 1966 Avanti II?
As of 11/2/25, these are some of the most in-demand types of Performance and Racing Products for a 1966 Avanti II:
Can I get help with 1966 Avanti II Performance and Racing Product orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Avanti Performance and Racing Products and more.
What is your return policy for Avanti II Performance and Racing Products?
Advance Auto Parts keeps returns simple. For new Avanti II Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
