1965 Porsche 912 Fuel and Emissions Systems
More 1965 Porsche 912 Fuel and Emissions Systems Categories
If you’re looking for an original Fuel and Emissions Systems replacement for a 1965 Porsche 912, you can search through our selection below. You’ll also find aftermarket and OEM Fuel and Emissions Systems to meet your needs.
Essential 1965 Porsche 912 Fuel and Emissions Systems
Mr. Gasket – High Performance Electric Fuel Pump – Universal Carbureted Engines (Part No.42S)
from
$56.99
Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flow rate is 28 gallons per hour (GPH) at 2 to 3-1/2 pounds per square inch (PSI). Universal design for most import 4 & 6-cylinder carburetor applications. Please see part #12S for V8 gasoline applications, part #12D for diesel applications or part #12E for Ethanol, Methanol, E85 and Race Fuel applications. Solid-state worry free electronics. Eliminates vapor lock and flooding. Works well as a fuel transfer, booster, or stand-alone pump. Not recommended for diesel, methanol, ethanol, E85 or race fuel applications!!
Product Features:
See More
Product Features:
- Solid-state Worry Free Electronics
- Internal Pressure Regulating
- Universal Design Allows For Easy Installation
- No DiaphraGMs Or Mechanical Parts To Wear Out
- Makes An Excellent Fuel Transfer or Booster Pump
- Hose Barbs Fit 5/16″ Fuel Hose
- Self-priming, 2 wire design
- Eliminates vapor lock and flooding
Delphi – Electric Fuel Pump: With Extra Fittings, Insulating Sleeve, Nuts/Washers, Terminal Hardware (Part No.FE0023)
from
$221.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
Product Features:
See More
Product Features:
- Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
- Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
- Improved pump performance as a result of Delphi’s innovative design and durability
- Restores fast pressure performance and system integrity, translating to better pumping through less energy
- Part is validated, tested and matched to the right vehicle application
- Lower amperage draws less load on vehicle’s electrical system
- Always be sure to check and clean fuel tank to avoid unnecessary returns
- Always replace the fuel strainer when doing a fuel pump repair
Sangsin – OE Replacement Ceramic Brake Pads (Part No.N1010935337SBC)
from
$69.26
This part matches Original Equipment (OE) quality specifications which means that it is at least as good if not better than the original part the manufacturer supplied the car with. Sangsin manufactures and designs it’s brake pads to original equipment specifications for quality long lasting performance and is the OE supplier for major Korea automakers including Hyundai and Kia Motors. Sangsin is the largest friction manufacturer in Korea and has been devoted to manufacturing, researching and developing brake pads, linings and other vehicle friction material for over 40 years. Sangsin has eliminated friction materials that create black dust and noise and ensures quiet braking and clean wheels.
Product Features:
See More
Product Features:
- OE Ceramic formulation: Excellent fade resistance, Extremely low dust characteristics
- Incorporates precision fit shims, OE positive mold design technology
- OEM technology: Chamfered and Slotted to reduce noise when braking
- Scorched as same as OE process in order to minimize the need for initial break-in and increase initial stopping power
- 2-stage press process Fine blanked backing plate: insure precise fit and function
- Underlayer between friction and backing plate to promote better friction to plate adhesion an minimize noise
- OE level shim with premium Rubber-Steel-Rubber shim
Bosch – Turbine Electric Fuel Pump (Part No.E3000235076BOS)
from
$237.74
Benchmark quality from the worldwide leader in fuel injection technology. Bosch state-of-the-art turbine fuel pumps offer many advantages when compared to older roller-cell and inner-gear pump designs. These pumps offer near silent operation and improved drivability, the core components of this turbine design significantly reduce wear and deliver a longer service life. Bosch Turbine Fuel Pumps are nearly identical in dimension and appearance to the units they replace for a precise fit every time. Plus, application-specific, illustrated step-by-step instructions are included with all Bosch Turbine Fuel Pumps for safe and easy installation. To prevent hot start problems, Bosch includes a non-return valve that maintains system pressure long after the vehicle has been shut off.
Product Features:
See More
Product Features:
- OE-Equivalent Direct fit for easy installation.
- OE connections and fittings.
- Superior turbine pump design that virtually eliminates fuel pulsation.
- Precision, spin-balanced armature to reduce noise and vibration.
- Premium carbon brushes, utilizing advanced materials.
- Noise suppression coil that eliminates radio frequency interference.
- Illustrated step-by-step instructions are included.
Pierburg – Electric Fuel Pump (Part No.E3000422640APG)
from
$256.62
PIERBURG Fuel Pumps excel through their highly developed technology, optimum pumping characteristics when hot, and their low noise level. For over 80 years PIERBURG has been a leading manufacturer of fuel pumps for European vehicles
Product Features:
See More
Product Features:
- Made in Europe – 100% from OE factories and thus OE Standard
- Optimal hot fuel supply properties and low noise level
- Online Service and Product Information
- Provides OE performance and dependability Installation Note: To avoid future warranties clean tank and change fuel filter when installing a new pump
Delphi – Fuel Tank Cleaning Kit (Part No.FC01)
from
$12.49
To perform a complete fuel pump replacement, clean the tank every time. Order the Delphi Fuel Tank Cleaning Kit (Part FC01). Remember, the original pump went into a clean fuel tank, to ensure the same level of performance, the new pump should too. 100 ye
Product Features:
See More
Product Features:
- Helps avoid premature fuel pump failure
- Lint free towel included
- Low suds formulation
- Removes harmful contaminants from the fuel tank
Original Equipment – Fuel Tank Body Seal (Part No.E2003947548OEA)
from
$28.91
Fuel Tank Body Seal
Popular 1965 Porsche 912 Fuel and Emissions Systems Categories
1965 Porsche 912 Fuel and Emissions Systems
You count on your 1965 Porsche 912 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Fuel and Emissions Systems. With 3 Fuel and Emissions Systems ranging in price from $12.49 to $56.99, you’re sure to find everything you need for your 1965 Porsche 912.
Brands matter. If you want to shop a specific Fuel and Emissions Systems brand, we stock 3 different brands like Delphi, Mr. Gasket, and Original Equipment. 1965 Porsche 912 Fuel and Emissions Systems start as low as $12.49!
One of the best ways to find top quality OEM or aftermarket Fuel and Emissions Systems is by asking professionals. Short of that, you can shop with confidence thanks to our 26 extensive product reviews on 1965 Porsche 912 Fuel and Emissions Systems.
Did we mention you can order your Fuel and Emissions Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Fuel and Emissions Systems inventory for your 1965 Porsche 912 below to get started!
Top-Rated Fuel and Emissions Systems Brands For Your 1965 Porsche 912
Trusted Fuel and Emissions Systems OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1965 Porsche 912 running right for years to come. In our inventory you’ll find brands like Delphi, Mr. Gasket, Original Equipment, and even more.
Popular Mr. Gasket Fuel and Emissions Systems
You’ll find popular Mr. Gasket brand products across Fuel Pumps. All are waiting to get your 1965 Porsche 912 back on the road. Some of the top-rated Mr. Gasket products in these categories are:
FAQs for 1965 Porsche 912 Fuel and Emissions Systems
What are the most purchased Fuel and Emissions Systems for the 1965 Porsche 912?
Out of 3 Fuel and Emissions Systems for the 1965 Porsche 912, the most popular in our inventory are:
