1965 Porsche 911 Body Parts
More 1965 Porsche 911 Body Parts Categories
If you’re looking for an original Body Parts replacement for a 1965 Porsche 911, you can search through our selection below. You’ll also find aftermarket and OEM Body Parts to meet your needs.
Essential 1965 Porsche 911 Body Parts
Original Equipment – Emblem Gasket (Part No.O5017241817OEA)
from
$4.04
Emblem Gasket
Original Equipment – Bumper Seal (Part No.O107022434OEA)
from
$55.46
Bumper Seal
Original Equipment – Bumper Seal (Part No.O107029502OEA)
from
$122.13
Bumper Seal
Metro Mould – Door Seal (Part No.LM 911-T)
from
$82.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Ready-to-install Door Weatherstripping that comes with correct tool-installed clips and pins plus molded ends that are truly softer than other available reproductions. All are made of the finest weather resistant and ozone resistant sponge. Molded Door Seals, for the Targa/Cabriolet. Pair. R&L.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- There’s no need to slam when you use Metro SUPERsoft weatherstripping products
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Original Equipment – Door Seal (Part No.O9030656041OEA)
from
$56.47
Door Seal
Original Equipment – Engine Compartment Insul. (Part No.A900022697OEA)
from
$71.44
Engine Compartment Insul.
Original Equipment – Hood Pad (Part No.O204083364OEA)
from
$85.53
Hood Pad
Original Equipment – Mirror Mounting Pad (Part No.O505722463OEA)
from
$4.84
Mirror Mounting Pad
Original Equipment – Door Window Belt Wea (Part No.O902282875OEA)
from
$34.97
Door Window Belt Wea
Original Equipment – Stone Guard (Part No.O5159648520OEA)
from
$25.10
Stone Guard
Original Equipment – Stone Guard (Part No.O5159655961OEA)
from
$101.30
Stone Guard
Original Equipment – Stone Guard (Part No.O5159655958OEA)
from
$101.05
Stone Guard
Original Equipment – Sunroof Seal (Part No.O904022698OEA)
from
$55.25
Sunroof Seal
Original Equipment – Sunroof Seal (Part No.O904022699OEA)
from
$38.30
Sunroof Seal
Stabilus – Gas Charged Hood Strut (Part No.O202053967STB)
from
$30.67
STABILUS gas-charged lift supports make it easy and safe to raise and lower heavy hoods, rear hatches and tailgates by hand. Compact design, high functional comfort and integrated operating safety expand the range of applications for STABILUS products in utility vehicle design. As the world’s leading manufacturer of lift supports, STABILUS can provide exact replacements for practically any application where a lift support is used.
Product Features:
See More
Product Features:
- Restores the original opening and closing speeds of your hood, hatch or trunk
- Easy-to-install
- No special tools required
- Engineered for your application
- Easy lifting and reduced closing effort
- Consistent lifting force through 50,000 cycles
- Rust-resistant piston rod extends product life
- Dynamic damping technology, available on select lift supports
Stabilus – Gas Charged Hood Strut (Part No.O2020129286STB)
from
$34.47
STABILUS gas-charged lift supports make it easy and safe to raise and lower heavy hoods, rear hatches and tailgates by hand. Compact design, high functional comfort and integrated operating safety expand the range of applications for STABILUS products in utility vehicle design. As the world’s leading manufacturer of lift supports, STABILUS can provide exact replacements for practically any application where a lift support is used.
Product Features:
See More
Product Features:
- Restores the original opening and closing speeds of your hood, hatch or trunk
- Easy-to-install
- No special tools required
- Engineered for your application
- Easy lifting and reduced closing effort
- Consistent lifting force through 50,000 cycles
- Rust-resistant piston rod extends product life
- Dynamic damping technology, available on select lift supports
StrongArm – Trunk Lift Support: 12.58" Ext Length, 3.99" Travel, 95 Lbs of Force, 1 Pk (Part No.E4454)
from
$30.99
Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.
Product Features:
See More
Product Features:
- Heavy Gauge Steel Body
- Self-Cleaning Piston Assembly
- Rubber O-Ring Piston Seal
Atlas Lift – Lift Support (Part No.LS10170)
from
$27.99
Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion-resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!
Product Features:
See More
Product Features:
- Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable
- Easy Install – Less than 15 Minutes! based on average install time across all parts
- No Special Tools Required
- Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance
- OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function
- OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable
- World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal
- Trilingual Install Instructions provided inside each package
Original Equipment – Window Seal (Part No.O902022696OEA)
from
$94.77
Window Seal
Popular 1965 Porsche 911 Body Parts Categories
1965 Porsche 911 Body Parts
You count on your 1965 Porsche 911 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Body Parts. With 15 Body Parts ranging in price from $3.77 to $94.77, you’re sure to find everything you need for your 1965 Porsche 911.
Brands matter. If you want to shop a specific Body Parts brand, we stock 4 different brands like Original Equipment, Atlas Lift, and Metro Mould. 1965 Porsche 911 Body Parts start as low as $3.77!
Did we mention you can order your Body Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Body Parts inventory for your 1965 Porsche 911 below to get started!
FAQs for 1965 Porsche 911 Body Parts
What are the most purchased Body Parts for the 1965 Porsche 911?
Out of 15 Body Parts for the 1965 Porsche 911, the most popular in our inventory are:
