1965 Plymouth Fury Ignition and Tune-Up Products
More 1965 Plymouth Fury Ignition and Tune-Up Products Categories
If you’re looking for an original Ignition and Tune-Up Products replacement for a 1965 Plymouth Fury, you can search through our selection below. You’ll also find aftermarket and OEM Ignition and Tune-Up Products to meet your needs.
Essential 1965 Plymouth Fury Ignition and Tune-Up Products
Carquest Premium – Ignition Contact Set (Part No.APA1056)
from
$26.49
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Accel – 8Mm Super Stock Spiral Uni Bu (Part No.5040B)
from
$89.99
The traditional ACCEL combination of yellow wire and red spark plug boots has been added to these SuperStock Spiral Core 5000 Series wire sets, which feature color-matched wire and spark plug boots in blue, black, and red. With only 500 ohms/ft. of resistance, more ignition energy can reach the spark plug, producing a longer-lasting, hotter spark flame kernel. The results is higher performance through improved efficiency, quicker throttle response, and reduced emissions. This 8mm wire’s double silicone construction is rated to 550 degrees F. The high-gloss wire jacket resists moisture, chemicals, and heat extremes for longer life and great looks. The fiberglass braid adds greater pull strength and terminal retention, while the stainless steel spark plug terminals provide excellent long life, electrical conductivity, and corrosion resistance. Both universal and custom-fit applications are available for early and late model cars and trucks.
Product Features:
See More
Product Features:
- 500 Ohms/ft Of Resistance
- 550 F Rated Silicone Jacket
- Stainless Steel Plug Terminals
- High RFI Suppression For Street And Strip Use
- Universal And Import Coverage
- High-strength Fiberglass Braid Construction
- Pre And Post HEI Vehicles
- 8mm High Gloss Silicone Jacket
Carquest Premium – Ignition Conversion Kit (Part No.CBA1759)
from
$459.99
Ignition Conversion Kit
Dorman – Help – Spark Plug Non-Foulers – 14mm Tapered Seat (Part No.42006)
from
$6.99
This spark plug non fouler is designed for easy installation on specified vehicles to protect spark plugs from fouling and damage. It is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spark plug non fouler is designed for easy installation to protect spark plugs from fouling and damage on specified vehicles
- Ideal solution – this non-fouler preserves spark plug life and is a reliable replacement for an original non-fouler that has failed due to corrosion
- Durable construction – made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Carquest Premium – Ignition Switch (Part No.CSC1455)
from
$48.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
MSD Ignition – Wire Set; Black Super Conductor; Chrysler 383-440 HEI for MSD Distributor (Part No.32733)
from
$175.99
The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.
Product Features:
See More
Product Features:
- Bolt-on Performance
- Custom Fit For Make And Model Listed
- Wires Are Pre-Cut To Exact Specifications
MSD Ignition – Wire Set; Super Conductor; 8-cyl. Multi-Angle Plug; Socket/HEI (Part No.31199)
from
$129.99
Set includes terminals for engines with early type (socket) and late type (HEI spark plug top) distributor caps. 90 degree boots and terminals factory installed on one end.
Product Features:
See More
Product Features:
- Extra Long 8.5mm Wires So You Can Cut To Your Designed Length
- Incl. both socket-style and spark plug-style boots and terminals
- Includes Mini-Stripper-Crimper For Factory Style Crimps
- Size Includes: [2]48/50/56 in./[3] 32 in. Wires/Boots/Terminals
- Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
- Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately
Accel – Super Stock Elect Coil Chrome (Part No.8145C)
from
$72.99
Excellent high performance coil for vehicles that have been converted from points to a breakerless electronic distributor or electronic ignition system, where a canister type oil filled can coil is preferred. Designed with optimized low resistance, high turns ratio windings to work specifically with ACCEL 41, 51, 52, 61 & 71000 Series breakerless electronic replacement distributors. Engineered for higher energy output resulting in quicker starting, improved throttle response and more high RPM power. Special crimped and soldered internal connections ensure positive contacts. High performance tan Alkyd tower provides “”flashover”” protection to primary terminals. Available in “”ACCEL Yellow”” or Chrome Plated can.
Product Features:
See More
Product Features:
- Engineered for higher energy output
- Improved throttle responce
- More high RPM power
- Chrome Plated
Carquest Premium – Distributor Cap (Part No.CAC1062)
from
$14.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest – Distributor Cap (Part No.24C1019)
from
$8.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- High-quality products that meet OE appearance and performance to
Mallory – Mallory Prosidewinder 90F Univ. Wire Set (Part No.937)
from
$133.99
Features at a glance, low 300 Ohm resistance spiral core delivers high energy output for maximum spark at the plug. Great RFI suppression meets the demands of today’s on-board electronics, such as electronic ignition, sound systems, and computer controls. 8MM ozone-resistant red silicone jacket repels water, oil, grease, and fuel, and withstands temperatures up to 500 degrees. Fits V8, universal wire kit: includes 45 degree spark plug boots, female socket (standard) distributor boots and terminals.
Product Features:
See More
Product Features:
- Most Advanced Wire By Mallory
- RFI Suppression
- High Temperature Silicone Jacket
- Withstands Over 500+F
- Come In Ready To Use Kits
- Extra Long Kits
Accel – Universal Fit Super Stock 8mm Suppression; Spark Plug Wire Set (Part No.4040R)
from
$65.99
These ACCEL wire sets are a true performance upgrade replacement for OE types. Efficient delivery of spark energy for a good price. Silicone boots with black wire contain zinc-plated steel terminals. Noise suppression core. Set contains 8 plug wires with coil lead.
Product Features:
See More
Product Features:
- 7mm And 8mm High Gloss Silicone Jacket
- 450° F Rated Silicone Jacket
- Stainless Steel Plug Terminals
- RFI Suppression For Street Driven Applications
- Custom-fit Universal And Import Coverage
- High-strength Fiberglass Braid Construction
- Pre And Post HEI Vehicles
Felpro – Distributor Mounting Gasket (Part No.6464)
from
$3.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Validated for fit, form and function
- Unsurpassed quality you can trust
Carquest Premium – Distributor Rotor (Part No.DAA1005)
from
$9.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest – Distributor Rotor (Part No.23A1016)
from
$4.29
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- High-quality products that meet OE appearance and performance to
DENSO – Spark Plug Wire Set: Carbon Core, 9 Wire Set (Part No.671-8126)
from
$51.99
DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.
Product Features:
See More
Product Features:
- Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
- Identical OE end caps are designed to “click” into place for easy installation and a secure fit
- Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation
Accel – Universal Fit Super Stock 8mm Copper; Spark Plug Wire Set (Part No.4039B)
from
$58.99
Performance upgrade for 7mm OE applications, silicone jacket with fiberglass braid EPDM insulation, tinned copper core, rated at 450 degrees Fahrenheit. Includes 8 blue extra-long wires, coil lead, silicone boots, zinc-plated steel terminals. Requires terminal and boot installation on distributor end.
Product Features:
See More
Product Features:
- Silicone Spark Plug Boots
- 90 Degree Spark Plug Boot Angle
- 450 Degree Wire Temperature Rating
- Meets Or Exceeds OE Boot Temperature Rating
Felpro – Spark Plug Tube Seal Set (Part No.ES 12794)
from
$7.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Autolite – Copper Spark Plug: Delivers Quick Starts, Good Fuel Economy, Smooth Acceleration (Part No.303)
from
$3.49
With over 100 years of engineering expertise and more than 11 billion plugs sold, Autolite continues to set the standard in spark plug technology. Designed and engineered in the USA, these spark plugs feature a copper-glass seal that bonds the insulator, terminal post, and center electrode together, ensuring full required voltage at the spark gap with a 100% leak-proof, gas-tight seal. The multi-rib insulator reduces the risk of flash-over, while the one-piece terminal post adds strength and durability. Additionally, the built-in resistor minimizes radio frequency interference (RFI) and electrode erosion, making these spark plugs a reliable choice for enhancing your vehicle’s performance.
Product Features:
See More
Product Features:
- Copper-glass seal bonds insulator, terminal post center electrode together; assures full required voltage at spark gap; gas-tight seal (100% leak proof)
- Multi-rib insulator reduces danger of “flash-over”
- One-piece terminal post adds strength
- Resistor reduces radio frequency interference (RFI) and electrode erosion
- Quick Starts: The Autolite Copper Spark Plug is engineered to deliver quick and reliable starts, ensuring your vehicle is ready to go when you are.
- Good Fuel Economy: Designed to optimize fuel combustion, these spark plugs help improve your vehicle’s fuel efficiency, saving you money at the pump.
- Smooth Acceleration: Experience smoother and more responsive acceleration with the advanced engineering of Autolite Copper Spark Plugs.
NGK – OE Series V-Power Nickel Spark Plug: V-Groove Tip Design, XR5 (Part No.3332)
from
$4.99
NGK V-Power spark plugs offer reliable performance and improved ignitability over standard nickel plugs. Engineered specifically for OE applications, the special V-cut nickel alloy center electrode and concave ground electrode of NGK’s V-Power spark plug increases ignitability providing quicker starts and smoother idle. NGK’s legendary high grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance. Trivalent metal plating ensures superior anti-corrosion and anti-seizing properties.
Product Features:
See More
Product Features:
- ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction nickel alloy center electrode with V-groove provides consistent performance
- RECOMMENDED USAGE: Best for vehicles with OE nickel alloy plugs, not recommended on vehicles with factory precious metal plugs
- NGK’s OE CERAMIC TECHNOLOGY: High grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance
- SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
- COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
- TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
- Enhanced Ignitability: The V-cut nickel alloy center electrode and concave ground electrode design of NGK V-Power spark plugs provide quicker starts and smoother idle.
- OE Application Specific: Engineered specifically for Original Equipment (OE) applications, ensuring compatibility and reliable performance.
- V-Groove Tip Design: The unique V-Groove tip design of the XR5 model enhances ignitability and overall engine performance.
Carquest Premium – Distributor Vacuum Advance (Part No.VBC1001)
from
$37.99
The distributor is just one piece of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.
Product Features:
See More
Product Features:
- All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Carquest Premium – Distributor Vacuum Advance (Part No.VBC1075)
from
$24.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Distributor T3820: 100% New, With Cap and Rotor (Part No.T3820)
from
$115.99
Carquest Premium distributors are built to meet or exceed the original equipment (OE) specifications for each application. Our distributors are built by a manufacturer that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each distributor is supplied with the cap, rotor and any seals needed for installation. Carquest Premium distributors are 100% new and undergo extensive validation testing to ensure long-lasting ignition performance and reliability.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- 100% new unit with no core charges
- Precision machined shafts result in high speed accuracy and help prevent bearing failures
- Every distributor is tested to ensure reliable and long-lasting performance
- O-rings or gaskets included where applicable
- Precision Engineered ignition modules and plugs ensure proper performance plus precise connection.
- Precision machined and ground shafts assure high speed accuracy and prevent bearing failures.
- Original Equipment Equivalent high voltage ignition coils.
- 100% New Components and fasteners eliminate premature failures.
Carquest Premium – Distributor T3896: 100% New, With Cap and Rotor (Part No.T3896)
from
$113.99
Carquest Premium distributors are built to meet or exceed the original equipment (OE) specifications for each application. Our distributors are built by a manufacturer that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each distributor is supplied with the cap, rotor and any seals needed for installation. Carquest Premium distributors are 100% new and undergo extensive validation testing to ensure long-lasting ignition performance and reliability.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- 100% new unit with no core charges
- Precision machined shafts result in high speed accuracy and help prevent bearing failures
- Every distributor is tested to ensure reliable and long-lasting performance
- O-rings or gaskets included where applicable
- Precision Engineered ignition modules and plugs ensure proper performance plus precise connection.
- Precision machined and ground shafts assure high speed accuracy and prevent bearing failures.
- Original Equipment Equivalent high voltage ignition coils.
- 100% New Components and fasteners eliminate premature failures.
Carquest Premium – Distributor T3690: 100% New, With Cap and Rotor (Part No.T3690)
from
$83.99
Carquest Premium distributors are built to meet or exceed the original equipment (OE) specifications for each application. Our distributors are built by a manufacturer that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each distributor is supplied with the cap, rotor and any seals needed for installation. Carquest Premium distributors are 100% new and undergo extensive validation testing to ensure long-lasting ignition performance and reliability.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- 100% new unit with no core charges
- Precision machined shafts result in high speed accuracy and help prevent bearing failures
- Every distributor is tested to ensure reliable and long-lasting performance
- O-rings or gaskets included where applicable
Dorman – Help – Distributor Gears (Part No.90453)
from
$23.89
This distributor drive gear is designed to match the fit, function and appearance of the original part on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this distributor drive gear matches the fit, function and appearance of the factory part on specified years, make and models
- Ideal solution – this drive gear is a reliable replacement for an original part that has failed due to moisture infiltration or vibration
- Durable construction – this assembly is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Popular 1965 Plymouth Fury Ignition and Tune-Up Products Categories
1965 Plymouth Fury Ignition and Tune-Up Products
You count on your 1965 Plymouth Fury to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Ignition and Tune-Up Products. With 117 Ignition and Tune-Up Products ranging in price from $2.79 to $569.99, you’re sure to find everything you need for your 1965 Plymouth Fury.
Brands matter. If you want to shop a specific Ignition and Tune-Up Products brand, we stock 16 different brands like NGK, Autolite, and ACDelco. 1965 Plymouth Fury Ignition and Tune-Up Products start as low as $2.79!
One of the best ways to find top quality OEM or aftermarket Ignition and Tune-Up Products is by asking professionals. Short of that, you can shop with confidence thanks to our 1,196 extensive product reviews on 1965 Plymouth Fury Ignition and Tune-Up Products. Some of the top-rated Ignition and Tune-Up Products products we carry are Blaster 2 Coil: High Performance Ignition Upgrade with 4.3 stars and Ignition Coil with 4.5 stars.
Did we mention you can order your Ignition and Tune-Up Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Ignition and Tune-Up Products inventory for your 1965 Plymouth Fury below to get started!
Top-Rated Ignition and Tune-Up Products Brands For Your 1965 Plymouth Fury
Trusted Ignition and Tune-Up Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1965 Plymouth Fury running right for years to come. In our inventory you’ll find brands like NGK, Autolite, ACDelco, and even more.
Popular Carquest Ignition and Tune-Up Products
You’ll find popular Carquest brand products across Ignition Coils and Boots. All are waiting to get your 1965 Plymouth Fury back on the road. Some of the top-rated Carquest products in these categories are:
Top-Rated Accel Ignition and Tune-Up Products
If Accel are what you’re looking for, our inventory holds plenty. We stock Accel brand Ignition and Tune-Up Products for your 1965 Plymouth Fury, and some of our most reviewed Accel parts include:
from
$63.99
(25)
Universal Fit Super Stock 8mm Suppression; Spark Plug Wire Set
Optional Spark Plug Wires
FAQs for 1965 Plymouth Fury Ignition and Tune-Up Products
What are the most purchased Ignition and Tune-Up Products for the 1965 Plymouth Fury?
Out of 117 Ignition and Tune-Up Products for the 1965 Plymouth Fury, the most popular in our inventory are:
from
$3.49
(17)
Copper Spark Plug: Delivers Quick Starts, Good Fuel Economy, Smooth Acceleration
Spark Plugs
What are the top-rated 1965 Plymouth Fury Ignition and Tune-Up Products?
Top-rated Ignition and Tune-Up Products for your 1965 Plymouth Fury based on customer reviews/ratings are:
from
$49.99
(20)
Blaster 2 Coil: High Performance Ignition Upgrade
“Had one before and blew it up, good easy replacement. MSD makes a good product.”
