1965 Plymouth Belvedere Performance Exhaust Products

Essential 1965 Plymouth Belvedere Performance Exhaust Products

Flowmaster Inc. – Prebent Tailpipes – 2.50 in. Rear Exit – Pair (Part No.15806)

Prebent Tailpipes - 2.50 in. Rear Exit - Pair

from

$226.99
Prebent pipe kits. Flowmaster’s 16 gauge mandrel bent pipe kits are designed to fit perfectly onto your vehicle with all the quality and performance that you would expect from Flowmaster.
See More

Flowmaster Inc. – 50 Series Muffler, 3in Offset Inlet 3in Center Outlet, 17in long, Non-Reversible, Moderate Sound (Part No.53056)

50 Series Muffler, 3in Offset Inlet 3in Center Outlet, 17in long, Non-Reversible, Moderate Sound

from

$185.99
The Super 50 series muffler is a larger version of Flowmaster’s 50 series Delta Flow muffler. Originally designed for trucks and SUV’s, it is also well suited to muscle car and high performance applications. In addition, the larger case size significantly reduces interior resonance and provides a deep, rich tone along with mileage and power gains. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More

Flowmaster Inc. – 50 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Moderate Sound (Part No.842451)

50 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Moderate Sound

from

$175.99
The three chamber design utilizes Flowmaster’s patented Delta Flow technology along with an internal tuning chamber to reduce sound inside the vehicle. Provides the same performance and exterior tone characteristics as the two chamber, but with less interior resonance. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
See More

Flowmaster Inc. – Super 44 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Aggressive Sound (Part No.942446)

Super 44 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Aggressive Sound

from

$113.99
Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a powerful rich tone and is the most aggressive, deepest sounding, highest performing four inch case street muffler we’ve ever built! Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More

Flowmaster Inc. – 50 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Moderate Sound (Part No.942451)

50 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Moderate Sound

from

$154.99
The three chamber design utilizes Flowmaster’s patented Delta Flow technology along with an internal tuning chamber to reduce sound inside the vehicle. Provides the same performance and exterior tone characteristics as the two chamber, but with less interior resonance. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More

Flowmaster Inc. – 50 Series Muffler, 2.5in Offset Inlet 2.5in Center Outlet, Non-Reversible, Moderate Sound (Part No.52556)

50 Series Muffler, 2.5in Offset Inlet 2.5in Center Outlet, Non-Reversible, Moderate Sound

from

$185.99
The Super 50 series muffler is a larger version of Flowmaster’s 50 series Delta Flow muffler. Originally designed for trucks and SUV’s, it is also well suited to muscle car and high performance applications. In addition, the larger case size significantly reduces interior resonance and provides a deep, rich tone along with mileage and power gains. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More

Flowmaster Inc. – Super 44 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Aggressive Sound (Part No.842446)

Super 44 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Aggressive Sound

from

$126.99
Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a rich powerful tone and are the most aggressive, highest performing street muffler we’ve ever built in a four inch case. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
See More

Mr. Gasket – Ultra Seal: Exhaust Gasket Set (Part No.5936)

Ultra Seal: Exhaust Gasket Set

from

$38.49
Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.

Product Features:
  • Has A Steel Core With Graphite Facing
  • Graphite Facing Has Excellent Thermo-conductivity
  • Coated With High Temp Silicone For Sealing
  • Will Not (brindle ) Or Indent Aluminum Heads
See More

FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1414)

Exhaust Manifold Gasket Set

from

$42.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
  • Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
  • Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
  • Slotted bolt holes allow for easier header installation.
  • Not intended for use in emission controlled vehicles.
See More

FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1432)

Exhaust Manifold Gasket Set

from

$27.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
  • Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
  • Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
  • Slotted bolt holes allow for easier header installation.
  • Not intended for use in emission controlled vehicles.
See More

Hooker Headers – Super Competition Header Gasket (Part No.10838HKR)

Super Competition Header Gasket

from

$19.99
Hooker’s precision-matched Super Competition header gaskets provide a sure fit and unmatched exhaust sealing. This OEM quality gasket is constructed of a thick ,.060 inch, high temperature, non-asbestos fiber laminate with a perforated steel core, which provides a superior grip and adhesion. This construction also contributes to exact fit compliance between the cylinder head and header flange, offering excellent sealing properties during extreme temperature and operating conditions.

Product Features:
  • Tear Resistant
  • Precisely Cut To Match Header
See More

FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1462)

Exhaust Manifold Gasket Set

from

$23.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
  • Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
  • Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
  • Slotted bolt holes allow for easier header installation.
  • Not intended for use in emission controlled vehicles.
See More

FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1413)

Exhaust Manifold Gasket Set

from

$31.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
  • Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
  • Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
  • Slotted bolt holes allow for easier header installation.
  • Not intended for use in emission controlled vehicles.
See More

Mr. Gasket – Exhaust Gasket Set (Part No.353)

Exhaust Gasket Set

from

$30.99
Mr. Gasket Performance Exhaust Gaskets are manufactured from high-temperature composite material. They provides maximum torque retention to eliminate gasket failure. Precision die cut for an excellent fit, but can be trimmed if necessary for modified port applications. For OE replacement, high-performance street, drag race and oval track. Rectangular Ports, 1.00 inch x 1.64 inch

Product Features:
  • Manufactured from high-temperature acrylic blend exhaust material
  • Provides excellent sealing and durability
  • Can be trimmed if necessary for modified port applications
  • For OE replacement, high performance street, drag race and oval track use
  • Precision Die Cut For Excellent Fit
See More

Mr. Gasket – Ultra Seal: Exhaust Gasket Set (Part No.5938)

Ultra Seal: Exhaust Gasket Set

from

$48.49
Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.

Product Features:
  • Manufactured from high-temperature steel core/graphite faced exhaust material
  • Expanded steel core provides stability and maximum torque retention to eliminate gasket failure
  • Graphite impregnated facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head
  • Conforms to and seals minor surface irregularities
  • Can be trimmed if necessary for modified port applications
  • For OE replacement, high performance street, drag race and oval track use
  • Anti-Stick Properties
  • Easy Removal For Disassembly
See More

Mr. Gasket – Copper Seal; Exhaust Gasket Set (Part No.7167)

Copper Seal; Exhaust Gasket Set

from

$60.29
Copperseal exhaust gaskets are unique gaskets made from .043 inch solid copper. They feature an embossed O-ring design for a leak proof seal. They won’t shrink, deteriorate or blowout. Header bolts stay tight. Ideal for motor homes and towing.

Product Features:
  • Will Not Shrink/Deteriorate
  • Creates A Tight Leak Proof Seal
  • Helps Lower Under hood Temps
  • Seals Irregular Surfaces
  • Seals Slightly Damaged Surface
  • Ideal For Tow Vehicles
  • Ideal For Motor Homes
See More

Flowtech – Header Gasket Set (Part No.99361FLT)

Header Gasket Set

from

$18.59
Header Gasket Set

1965 Plymouth Belvedere Performance Exhaust Products

Maybe you’re in the middle of a full rebuild of that 1965 Plymouth Belvedere. Maybe you just need a couple of Performance Exhaust Products. Either way, Advance Auto Parts has 15 different Performance Exhaust Products in our inventory ranging from $18.59 to $226.99. That means you can find the exact parts or products you need to keep that 1965 Plymouth Belvedere running smoothly.

Performance Exhaust Products are only as good as their brand. We stock 5 different brands to make sure you have plenty of trusted parts to choose from for your 1965 Plymouth Belvedere. FEL-PRO Performance, Flowtech, and Hooker Headers are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Performance Exhaust Products for your 1965 Plymouth Belvedere, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Performance Exhaust Products to keep your 1965 Plymouth Belvedere rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Performance Exhaust Products Brands To Make Your 1965 Plymouth Belvedere Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1965 Plymouth Belvedere demands trusted brand parts and products to keep it running. Many trusted brands of Performance Exhaust Products make up Advance Auto Parts’ inventory, and all are ready to help make your Belvedere the best it can be. Be sure to browse some of our top Performance Exhaust Products brands and parts.

Popular Flowmaster Inc. Performance Exhaust Products

We carry Flowmaster Inc. parts in our stock across Performance Exhaust Tail Pipes and Performance Exhaust Mufflers categories, plus more. For a 1965 Plymouth Belvedere, our most popular Flowmaster Inc. Performance Exhaust Products include:
Prebent Tailpipes - 2.50 in. Rear Exit - Pair
from $226.99
(1)
Prebent Tailpipes – 2.50 in. Rear Exit – Pair
Performance Exhaust Tail Pipes

FAQs for 1965 Plymouth Belvedere Performance Exhaust Products

What are the most purchased Performance Exhaust Products for the 1965 Plymouth Belvedere?

Out of 15 Performance Exhaust Products for the 1965 Plymouth Belvedere, the most popular in our inventory are:
Header Gasket Set
from $18.59
This product is not rated
Header Gasket Set
Performance Exhaust Manifold Gaskets
Exhaust Manifold Gasket Set
from $31.49
This product is not rated
Exhaust Manifold Gasket Set
Performance Exhaust Manifold Gaskets
Super Competition Header Gasket
from $19.99
This product is not rated
Super Competition Header Gasket
Performance Exhaust Manifold Gaskets