1965 Oldsmobile Jetstar 88 Body Parts
More 1965 Oldsmobile Jetstar 88 Body Parts Categories
If you’re looking for an original Body Parts replacement for a 1965 Oldsmobile Jetstar 88, you can search through our selection below. You’ll also find aftermarket and OEM Body Parts to meet your needs.
Essential 1965 Oldsmobile Jetstar 88 Body Parts
Metro Mould – Door Window Seal (Part No.ALP 5052)
from
$71.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Ready-to-install Door Weatherstripping that comes with correct tool-installed clips and pins plus molded ends that are truly softer than other available reproductions. All are made of the finest weather resistant and ozone resistant sponge. Rear Quarter Window Door Lock Pillar Seal (upper). Made with steel cores. Pair. R&L.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense material to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
AmeriSeal – Flexible Window Glass Run Channel 96" Length (Part No.10871)
from
$18.99
Ameriseal’s 96″ Flexible Window Glass Run Channel For Application- 1960-1967 GM Mid Size Car is an anti-rattle channel made of high-grade rubber. With a sturdy and durable build, you can be sure to have it in a good condition even in the long run. It is designed to be easily installed by anybody by simply replacing any worn-out and old window glass run channel.
Product Features:
See More
Product Features:
- Flexible model
- Flocked lining system
- All-Rubber body
AmeriSeal – Flexible Flocked Lining All-Rubber Window Glass Run Channel 72" Length (Part No.10868)
from
$16.99
This Ameriseal 72″ Flexible Flocked Lining All-Rubber Window Glass Run Channel 72″ Length For Application- 1965-1975 GM Mid size car is the ideal solution for all your car leakage problems. This window glass run channel is perfectly compatible with the 1979-1993 Ford Mustang Coupe model. It features a strong adhesive to keep your car completely protected from dust and water. It is an ideal solution for your old or worn-out counterpart.
Product Features:
See More
Product Features:
- Flexible model
- Easy installation allows for user-friendly operability
- Durably designed for longevity
- Allows you to keep dust and water away from your car
- Highly dense rubber body built
Dorman – Help – Door Striker Bolt Kit – 7/16 In.-14 (Part No.38428)
from
$11.99
This door lock striker is designed to match the fit and function of the original striker on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this door lock striker is designed to match the fit and function of the original striker on specified vehicles
- Restores functionality – reliable replacement for an original part that has failed due to collision damage or fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Metro Mould – Convertible Top Seal (Part No.RR 1812)
from
$380.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s Convertible Top Seals all have that show winning look and fit. Our Convertible Top Seals all incorporate steel cores and studs for a perfect fit. Convertible Top Roof Rail Kit. 7-Piece set, right and left side top rail seals and windshield top header seal. Full steel cores and threaded studs. Middle section is 13-3/4 In. ’61 may need some modifications.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense material to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Convertible Top Seal (Part No.C/LP 40-G)
from
$10.79
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s Convertible Top Seals all have that show winning look and fit. Our Convertible Top Seals all incorporate steel cores and studs for a perfect fit. Convertible Top Windshield Header Seal. Clips installed every 3-5/8 In. Made of soft, black, skin-covered sponge. Sold by the foot.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- There’s no need to slam when you use Metro SUPERsoft weatherstripping products
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Quarter Glass Seal (Part No.VS 4-D)
from
$71.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s Quarter Glass Seals are the highest quality reproductions available. With molded curves and a non-wrinkling lip design. Other brands do not compare. Quarter Window Seals, for 4-Door Hardtops. For leading edge of rear quarter windows. 14 In. long. Pair.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense rubber to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Quarter Glass Seal (Part No.VS 3)
from
$38.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s Quarter Glass Seals are the highest quality reproductions available. With molded curves and a non-wrinkling lip design. Other brands do not compare. Rear Side Roll-Up Window Seal, for Hardtops and Convertibles. Two 20 In. sections slide into metal track. No steel insert. Pair.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense rubber to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Seat Frame Retainer (Part No.SB 62-A)
from
$16.29
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Seat Bumper. Made with steel core like original. 1-1/2 In. long, 7/16 In. thick. Two used per car. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense material to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Deck Lid Stop Buffer (Part No.SB 34)
from
$28.49
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Trunk Bumper. Fits lower corner on deck lid. 15/16 In. O.D. 11/16 In. high. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense rubber to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Door Lock Assembly (Part No.UM 1600-100)
from
$4.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Unbeaded Door and Trunk Lock Gasket. 1-3/16 In. O.D. 7/8 In. I.D. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Flat Gasket
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Exterior Door Handle Gasket (Part No.UM 2005-100)
from
$11.29
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Unbeaded Door Handle Mounting Pads. 4-Piece Set
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Flat Gasket
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Door Seal (Part No.LM 21-B)
from
$246.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Ready-to-install Door Weatherstripping that comes with correct tool-installed clips and pins plus molded ends that are truly softer than other available reproductions. All are made of the finest weather resistant and ozone resistant sponge. Front Molded Door Seals with Clips. For 4-Door Sedan and Wagon. Pair. R&L.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- There’s no need to slam when you use Metro SUPERsoft weatherstripping products
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Door Seal (Part No.LM 21-D/R)
from
$94.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Ready-to-install Door Weatherstripping that comes with correct tool-installed clips and pins plus molded ends that are truly softer than other available reproductions. All are made of the finest weather resistant and ozone resistant sponge. Rear Molded Door Seals with Clips. For 4-Door Sedan. Pair. R&L.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- There’s no need to slam when you use Metro SUPERsoft weatherstripping products
- Exact fit
- High quality original equipment replacement part
- Made in the USA
ACDelco – Trunk Lock with Key (Part No.D1425B)
from
$13.99
GM Genuine Parts Trunk Locks are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
Carquest Premium – Trunk Lock (Part No.TLA1007)
from
$9.79
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Metro Mould – Door Stop (Part No.SB 35)
from
$4.49
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Door Bumper. Made with twin retainers. 1-1/8 In. high X 9/16 In. wide X 1 In. long. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense rubber to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Locksmart – Door Lock Kit (Part No.DL15800)
from
$24.29
LockSmart® is a specialized aftermarket lock brand featuring door, trunk, and ignition lock cylinders. LockSmart® provides OE fit, form, and function locks across domestic and import applications for both late and older model vehicles.
Product Features:
See More
Product Features:
- All door locks are perfectly matched to the original for precision installation
- Professional quality construction using solid brass tumblers, chrome plated brass keys, die-cast zinc lock cores and multiple, randomly assigned key codes ensures superior operation
- Decades of industry leading research and development focused on meeting the technician’s needs
- With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues
Metro Mould – Deck Lid Stop Buffer (Part No.HA 2)
from
$17.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Hood Adjustment Bolt and Bumper. 1 In. diameter rubber head. 5/16 In. thick X 18 threads/inch X 1-3/4 In. long bolt. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense material to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Bumper (Part No.SM 66)
from
$15.29
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Rocker Arm Cover. Neoprene plug. Fits 1 In. hole. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense rubber to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Fuel Door Rubber Stop (Part No.SB 81)
from
$8.79
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Fuel Door Bumper. 7/8 In. high, 5/16 In. O.D. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense rubber to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Popular 1965 Oldsmobile Jetstar 88 Body Parts Categories
1965 Oldsmobile Jetstar 88 Body Parts
You count on your 1965 Oldsmobile Jetstar 88 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Body Parts. With 23 Body Parts ranging in price from $4.49 to $122.99, you’re sure to find everything you need for your 1965 Oldsmobile Jetstar 88.
Brands matter. If you want to shop a specific Body Parts brand, we stock 6 different brands like Dorman, LOCKSmart, and AC Delco. 1965 Oldsmobile Jetstar 88 Body Parts start as low as $4.49!
One of the best ways to find top quality OEM or aftermarket Body Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 20 extensive product reviews on 1965 Oldsmobile Jetstar 88 Body Parts. Some of the top-rated Body Parts products we carry are Trunk Lock Kit with 4.0 stars.
Did we mention you can order your Body Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Body Parts inventory for your 1965 Oldsmobile Jetstar 88 below to get started!
Top-Rated Body Parts Brands For Your 1965 Oldsmobile Jetstar 88
Trusted Body Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1965 Oldsmobile Jetstar 88 running right for years to come. In our inventory you’ll find brands like Dorman, LOCKSmart, AC Delco, and even more.
Popular Dorman – Help Body Parts
You’ll find popular Dorman – Help brand products across Trunk and Tailgate Parts. All are waiting to get your 1965 Oldsmobile Jetstar 88 back on the road. Some of the top-rated Dorman – Help products in these categories are:
FAQs for 1965 Oldsmobile Jetstar 88 Body Parts
What are the most purchased Body Parts for the 1965 Oldsmobile Jetstar 88?
Out of 23 Body Parts for the 1965 Oldsmobile Jetstar 88, the most popular in our inventory are:
What are the top-rated 1965 Oldsmobile Jetstar 88 Body Parts?
Top-rated Body Parts for your 1965 Oldsmobile Jetstar 88 based on customer reviews/ratings are:
from
$15.05
(1)
Trunk Lock Kit
“The only problem was that the rod was about four inches too short and had to go to dealership for them to order rod to go from cylinder to the actual ”
