1965 Oldsmobile Cutlass Ignition and Tune-Up Products
More 1965 Oldsmobile Cutlass Ignition and Tune-Up Products Categories
If you’re looking for an original Ignition and Tune-Up Products replacement for a 1965 Oldsmobile Cutlass, you can search through our selection below. You’ll also find aftermarket and OEM Ignition and Tune-Up Products to meet your needs.
Essential 1965 Oldsmobile Cutlass Ignition and Tune-Up Products
PerTronix – 1162A Ignitor Delco 6 cyl with Vacuum Advance (Part No.1162A)
from
$124.99
For over thirty years, the Ignitor has proven itself in applications ranging from race cars to tractors. The Ignitor replaces breaker points and troublesome factory electronic ignitions with a dependable, self contained and maintenance free electronic ign
Product Features:
See More
Product Features:
- PerTronix 1162A Ignitor Delco 6 cyl with Vacuum Advance
- Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
Carquest Premium – Ignition Conversion Kit (Part No.CBA1166)
from
$238.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Distributor Cap and Rotor Kit (Part No.CAE1983)
from
$30.49
Distributor Cap and Rotor Kit
Carquest Premium – Distributor Cap and Rotor Kit (Part No.CAE1787)
from
$15.99
Distributor Cap and Rotor Kit
NGK – NGK Wire Set (Part No.51371)
from
$36.99
NGK ultra-low resistance mag core wire sets provide outstanding performance and durability. High-temp premium silicone outer jacket and inner EPDM/silicone insulation contain high voltage currents for excellent dielectric strength. Stainless steel winding
Product Features:
See More
Product Features:
- PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
- BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
- STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
- CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
Carquest Premium – Spark Plug Wire Set: 8 Wires, Increased performance, Designed for direct fit (Part No.35-8102)
from
$35.99
Product Features:
See More
- SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
- Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
- 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
- EPDM inner insulation stops power-robbing voltage leaks.
- With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
- Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
- Excellent interference suppression and consistent performance
- Easy lock terminals for more convenient installation.
- Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
- Broad coverage available for most vehicles on the road today
- Include grease pack to ensure easy installation and removal
Carquest – Contact Set (Points) (Part No.A120V)
from
$24.05
BWD SELECT replacement parts are designed, specified and manufactured with one goal in mind – to make them the very best. We use the finest materials and improve on OE specifications whenever possible. The result is maximum performance and longevity.
Product Features:
See More
Product Features:
- 100% pure copper windings in primary and secondary bobbins improve durability and provide higher resistance to internal shorts and dielectric breakdown
- Thermoplastic housing withstands heat stress for enhanced durability
- Internal core made from grain oriented electrical steel limits loss factor within magnetic circuit to reduce heat and ensure coil endurance
- External core made from oriented silicon steel ensures durability and longevity
- Stainless steel spring resists corrosion
Carquest Premium – Ignition Contact Set (Part No.AKA1003)
from
$19.49
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Distributor Rotor (Part No.DAA1011)
from
$7.49
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Distributor Rotor (Part No.DAA1004)
from
$6.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Accel – 8Mm Super Stock Graphite Cust (Part No.4048)
from
$58.99
ACCEL’s SuperStock 4000 series spark plug wire sets are designed to upgrade an OE ignition system for high-spark delivery levels for street driven applications. The 450 degree F rated silicone jacket is extruded over a tightly woven, rugged fiberglass braid. The braid is applied over high dielectric strength EPDM (Ethylene Propylene Diene Monomer) inner insulation for ignition wire performance that exceeds SAE specifications.
Product Features:
See More
Product Features:
- 7mm And 8mm High Gloss Silicone Jacket
- 450 F Rated Silicone Jacket
- Stainless Steel Plug Terminals
- RFI Suppression For Street Driven Applications
- Custom-fit Universal And Import Coverage
- High-strength Fiberglass Braid Construction
- Pre And Post HEI Vehicles
ACDelco – Spark Plug Wire Set: Fiberglass Reinforced Latex Graphite Core (Part No.9746V)
from
$87.99
ACDelco Professional Spark Plug Wire Sets consist of a set of wires, encased in an insulating material, connectors, and insulating boots, and are a high quality replacement for many vehicles on the road today. The wires transfer high voltage pulses between the voltage source, the distributor, and the spark plugs. These premium aftermarket replacement components are manufactured to meet your expectations for fit, form, and function.
Product Features:
See More
Product Features:
- Professional, premium aftermarket replacement
- Provides the performance and dependability you expect from ACDelco
- Manufactured to meet expectations for fit, form, and function
Mallory – Unilite Electronic Ignition Distributor Series 37 (Part No.3748201)
from
$437.99
The industry standard with adjustable mechanical advance curve. Triggered by photo-optic infrared LED system. Improved combustion efficiency and economy, increased spark plug life and cold weather starting, and maintenance free operation.
Product Features:
See More
Product Features:
- Improved Combustion And Economy
- Increased Spark Plug Life
- Improved Cold Weather Starting
- Maintenance Free Operation
- Accurate Spark Timing
- Self-Lubricating Bushings
- Years Of Trouble-Free Service
PerTronix – D7110700 Flame-Thrower Electronic Distributor Billet Oldsmobilemobile V8 with Ignitor III Vacuum Advance Black Cap (Part No.D7110700)
from
$414.99
Plug n’ Play billet distributors are designed for maximum ignition performance at a price you can afford. Our I3 billet distributors ship with the all NEW Ignitor III multi-spark rev limiting modules. Replace your outdated points, electronic distributor
Product Features:
See More
Product Features:
- PerTronix D7110700 Flame-Thrower Electronic Distributor Billet Oldsmobilemobile V8 with Ignitor III Vacuum Advance Black Cap
- Plug n’ Play billet distributors are designed for maximum ignition performance at a price you can afford
Accel – Universal Fit 300+ Race; Spark Plug Wire Set (Part No.7041)
from
$89.99
For mounting on non-stock applications, for remote location. Choice of 4 core types. Female and male distributor towers. Terminal crimper and anvil tools. Includes silicone lube, boots and terminals. 20 piece kit.
Product Features:
See More
Product Features:
- 300+Race- 8.8mm Black
- For Race Engine Configurations
- Stainless Steel Spark Plug Terminals
- Suppression of EMI/RFI
- 600 Degree Double Silicone Construction
- Spiral Wound Copper/Nickel Alloy
- Fully Reactive Ferrite Material
- 150 Ohms Resistance
Accel – 8.8Mm Spiral Universal Fit (Part No.8033)
from
$153.99
These ACCEL 8.8mm wires feature a carbon/graphite core that virtually eliminate RFI noise while providing maximum conductivity for ultimate performance in any race or street application. Double silicon insulation eliminates leakage and misfire.
Product Features:
See More
Product Features:
- 500 Ohms/ft Of Resistance
- 550 F Rated Silicone Jacket
- Stainless Steel Plug Terminals
- Custom-fit Universal And Import Coverage
- Pre And Post HEI Vehicles
- Magnetic Suppression
- Fiberglass/Kevlar Core
- 500 Ohms Resistance
NGK – OE Series V-Power Nickel Spark Plug: V-Groove Tip Design, TR5 (Part No.2238)
from
$4.49
NGK V-Power spark plugs offer reliable performance and improved ignitability over standard nickel plugs. Engineered specifically for OE applications, the special V-cut nickel alloy center electrode and concave ground electrode of NGK’s V-Power spark plug increases ignitability providing quicker starts and smoother idle. NGK’s legendary high grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance. Trivalent metal plating ensures superior anti-corrosion and anti-seizing properties.
Product Features:
See More
Product Features:
- ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction nickel alloy center electrode with V-groove provides consistent performance
- RECOMMENDED USAGE: Best for vehicles with OE nickel alloy plugs, not recommended on vehicles with factory precious metal plugs
- NGK’s OE CERAMIC TECHNOLOGY: High grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance
- SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
- COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
- TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
- Enhanced Ignitability: The V-cut nickel alloy center electrode and concave ground electrode design of NGK V-Power spark plugs provide quicker starts and smoother idle.
- OE Application Specific: Engineered specifically for Original Equipment (OE) applications, ensuring compatibility and reliable performance.
- V-Groove Tip Design: The unique V-groove tip design of the center electrode enhances ignitability and overall engine performance.
NGK – G-Power Spark Plug: Single Platinum Tip Design, TR5GP (Part No.3186)
from
$6.29
NGK G-Power Platinum spark plugs are the best single platinum spark plugs at an economical price. G-Power plugs feature a fine wire platinum center electrode and a trapezoidal cut ground electrode that offers increased durability, improved fuel efficiency, lower emissions, faster starts and quicker acceleration over conventional nickel spark plugs. An excellent upgrade for vehicles which used nickel alloy spark plugs originally. For better performance consider upgrading to a NGK Iridium IX plug. For even greater performance consider upgrading to a NGK RUTHENIUM HX plug.
Product Features:
See More
Product Features:
- SINGLE PLATINUM TIP: Fine wire 0.6 millimeter platinum tip center electrode ensures improved durability and a consistently stable spark
- PLATINUM ALLOY: G-Power platinum provides exceptional value with increased performance and longer service intervals than factory nickel plugs
- TRAPEZOIDAL CUT GROUND ELECTRODE: Reduces quenching design produces improved ignitability and performance
- SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
- COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
- RECOMMENDED USAGE: Lower cost alternative to double precious metal spark plugs or as an upgrade to OE nickel alloy spark plugs
- Tapered Seat Type: The tapered seat type ensures a secure fit and optimal performance in compatible vehicles.
PerTronix – D9010 Flame-Thrower HEI Distributor Clockwise Vacuum Lockout Kit (Part No.D9010)
from
$10.99
Vacuum Advance & LockoutThese vacuum canisters help optimize ignition advance for maximum part throttle performance and cruise speed efficiency. Our vacuum lockout plates allow for precise pickup coil position and accurate rotor phasing.
Product Features:
See More
Product Features:
- PerTronix D9010 Flame-Thrower HEI Distributor Clockwise Vacuum Lockout Kit
- These vacuum canisters help optimize ignition advance for maximum part throttle performance and cruise speed efficiency.
Carquest Premium – Distributor Vacuum Advance (Part No.VBC1015)
from
$31.99
The distributor is just one piece of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.
Product Features:
See More
Product Features:
- All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
ACDelco – Ignition Capacitor (Part No.D204)
from
$16.99
ACDelco Professional Ignition Condenser is a high quality aftermarket replacement component for one or more of the following vehicle systems: cooling, hvac, ignition, starting and charging, body-electrical and lighting, wiper and washer, and/or engine fuel management. This premium aftermarket condenser is manufactured to meet or exceed your expectations for fit, form, and function.
Product Features:
See More
Product Features:
- Professional, premium aftermarket replacement
- Provides the performance and dependability you expect from ACDelco
- Manufactured to meet expectations for fit, form, and function
Carquest – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.26C1005)
from
$42.49
Carquest ignition coils meet original equipment (OE) fit, form and function and are built to ensure reliable starting and performance. Carquest ignition coils are tested to ensure proper spark and perfect fit for each application. These ignition coils are an affordable repair choice to restore the vehicle’s ignition system performance.
Product Features:
See More
Product Features:
- Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
- 100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
- Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure confidence and product reliability, every time.
Accel – GM Hei Supercoil Red/White (Part No.140005)
from
$113.99
Engineered for higher energy output resulting in quicker starting, improved idle quality, crisper throttle response and more high RPM power. Compatible with both original HEI ignition systems and later model computer controlled HEI systems. No need to remove or re-time distributor. Complete with simplified ground strap, mounting screws, silicone coil gasket and carbon contact brush / spring.
Product Features:
See More
Product Features:
- 10-15% More Energy
- Direct Plug In Replacement Direct OE Fit
- Advanced Bobbin Technology
- Highly Specialized Silicone Magnetic Steel Cores
- Similar to Standard Motor Products SMP Dr-32
- Long Life And Great Looks
Mallory – Universal Street Performance Ignition Coil (Part No.29219)
from
$76.99
Universal, 12-volt coil features an oil-filled design and arc resistant alkyd top for superior performance, insulation and cooling. The internal design of this coil eliminates the need for a separate ballast resistor. This coil is specifically designed to deliver optimum performance when used with: Mallory UNILITE or magnetic breaker less ignitions Mallory HYFIRE IV electronic ignition controls, and Mallory electronic ignition conversion kits.
Product Features:
See More
Product Features:
- 12 Volt Coil
- Oil-Filled Design
- Arch Resistant Alkyd Top
- Designed To Deliver Optimum Performance
MSD Ignition – Wire Set; Black Super Conductor; 8-cyl. Multi-Angle; Universal (Part No.31193)
from
$129.99
Set includes terminals for engines with early type (socket) and late type (HEI spark plug top) distributor caps. Multi-angle boots and terminals factory installed on one end.
Product Features:
See More
Product Features:
- Extra Long 8.5mm Wires So You Can Cut To Your Designed Length
- Incl. both socket-style and spark plug-style boots and terminals
- Includes Mini-Stripper-Crimper For Factory Style Crimps
- Size Includes: [2]48/50/56 in./[3] 32 in. Wires/Boots/Terminals
- Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
- Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately
Accel – 8Mm Super Stock Graphite Uni (Part No.4040B)
from
$65.99
ACCEL’s SuperStock 4000 series spark plug wire sets are designed to upgrade an OE ignition system for high-spark delivery levels for street driven applications. The 450 degree F rated silicone jacket is extruded over a tightly woven, rugged fiberglass braid. The braid is applied over high dielectric strength EPDM (Ethylene Propylene Diene Monomer) inner insulation for ignition wire performance that exceeds SAE specifications.
Product Features:
See More
Product Features:
- 7mm And 8mm High Gloss Silicone Jacket
- 450 F Rated Silicone Jacket
- Stainless Steel Plug Terminals
- RFI Suppression For Street Driven Applications
- Custom-fit Universal And Import Coverage
- High-strength Fiberglass Braid Construction
- Pre And Post HEI Vehicles
Accel – 7Mm Super Stock Copper Uni (Part No.3008)
from
$53.09
ACCEL’s SuperStock 4000 series spark plug wire sets are designed to upgrade an OE ignition system for high-spark delivery levels for street driven applications. The 450 degree F rated silicone jacket is extruded over a tightly woven, rugged fiberglass braid. The braid is applied over high dielectric strength EPDM (Ethylene Propylene Diene Monomer) inner insulation for ignition wire performance that exceeds SAE specifications.
Product Features:
See More
Product Features:
- 7mm Yellow Silicone Jacket
- Street-driven Applications
- Copper Core
- Orange Spark Plug Boots
- Pre HEI Vehicles
- Universal Wire Set
MSD Ignition – Wire Set; Super Conductor; Multi-Angle Plug; Socket/HEI (Part No.31179)
from
$143.99
Set includes terminals for engines with early type (socket) and late type (HEI spark plug top) distributor caps. 90 degree boots and terminals factory installed on one end.
Product Features:
See More
Product Features:
- Extra Long 8.5mm Wires So You Can Cut To Your Designed Length
- Incl. both socket-style and spark plug-style boots and terminals
- Includes Mini-Stripper-Crimper For Factory Style Crimps
- Size Includes [6] 90 Deg. Boots/Terminals
- Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
- Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately
Popular 1965 Oldsmobile Cutlass Ignition and Tune-Up Products Categories
1965 Oldsmobile Cutlass Ignition and Tune-Up Products
You count on your 1965 Oldsmobile Cutlass to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Ignition and Tune-Up Products. With 83 Ignition and Tune-Up Products ranging in price from $3.49 to $647.99, you’re sure to find everything you need for your 1965 Oldsmobile Cutlass.
Brands matter. If you want to shop a specific Ignition and Tune-Up Products brand, we stock 13 different brands like ACDelco, Autolite, and E3. 1965 Oldsmobile Cutlass Ignition and Tune-Up Products start as low as $3.49!
One of the best ways to find top quality OEM or aftermarket Ignition and Tune-Up Products is by asking professionals. Short of that, you can shop with confidence thanks to our 836 extensive product reviews on 1965 Oldsmobile Cutlass Ignition and Tune-Up Products. Some of the top-rated Ignition and Tune-Up Products products we carry are Blaster 2 Coil: High Performance Ignition Upgrade with 4.3 stars and Ignition Coil with 4.5 stars.
Did we mention you can order your Ignition and Tune-Up Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Ignition and Tune-Up Products inventory for your 1965 Oldsmobile Cutlass below to get started!
Top-Rated Ignition and Tune-Up Products Brands For Your 1965 Oldsmobile Cutlass
Trusted Ignition and Tune-Up Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1965 Oldsmobile Cutlass running right for years to come. In our inventory you’ll find brands like ACDelco, Autolite, E3, and even more.
Popular Dorman – Help Ignition and Tune-Up Products
You’ll find popular Dorman – Help brand products across Spark Plugs. All are waiting to get your 1965 Oldsmobile Cutlass back on the road. Some of the top-rated Dorman – Help products in these categories are:
Top-Rated Accel Ignition and Tune-Up Products
If Accel are what you’re looking for, our inventory holds plenty. We stock Accel brand Ignition and Tune-Up Products for your 1965 Oldsmobile Cutlass, and some of our most reviewed Accel parts include:
from
$63.99
(25)
Universal Fit Super Stock 8mm Suppression; Spark Plug Wire Set
Optional Spark Plug Wires
FAQs for 1965 Oldsmobile Cutlass Ignition and Tune-Up Products
What are the most purchased Ignition and Tune-Up Products for the 1965 Oldsmobile Cutlass?
Out of 83 Ignition and Tune-Up Products for the 1965 Oldsmobile Cutlass, the most popular in our inventory are:
from
$4.99
(33)
Conventional Nickel Tip Copper Core Spark Plug: Reduces Corrosion & Maximizes Durability
Spark Plugs
from
$3.49
(17)
Copper Spark Plug: Delivers Quick Starts, Good Fuel Economy, Smooth Acceleration
Spark Plugs
What are the top-rated 1965 Oldsmobile Cutlass Ignition and Tune-Up Products?
Top-rated Ignition and Tune-Up Products for your 1965 Oldsmobile Cutlass based on customer reviews/ratings are:
from
$49.99
(20)
Blaster 2 Coil: High Performance Ignition Upgrade
“Had one before and blew it up, good easy replacement. MSD makes a good product.”
from
$4.29
(10)
Platinum Spark Plug: Fires Cleaner, Easier Starts, Quicker Acceleration
“I used these plugs on a 400 bb mopar with 64/426 wedge heads .made tho engine run so much better the your standard copper plugs.yes I will buys these ”
