1965 Jeep CJ5 Drivetrains
More 1965 Jeep CJ5 Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1965 Jeep CJ5, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1965 Jeep CJ5 Drivetrains
Yukon Gear – Replacement Oil Baffle For Model 35 IFS Front, Dana 25, 27, 30, 44 IFS & Disconnect And Dana 50 (Part No.33002)
from
$4.99
Product Features:
See More
- Oil baffle for Dana Spicer 30, Dana Spicer 44 IFS, Dana Spicer 50, AMC Model 35 IFS
Crown Auto Jeep Replacmnt – OE Replacement, Right Hand Thread, Single (Part No.J5353025)
from
$3.99
Crown Automotive offers the largest line of replacement parts for Jeep(R), as well as a growing line of parts for Chrysler and Dodge. Our applications Comes with Axle, Body, Brake, Clutch, Cooling, Electrical, Engine, Fuel, Lamps, Mirrors, Steering, Suspension, Transmission and Wiper.
Product Features:
See More
Product Features:
- Leading Manufacturer Of Quality Replacement Parts For Jeep
- Meets Standards For Quality
- Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
- Improve The Performance
- Easy Installation
Yukon Gear – Zip Locker Front Switch Cover (Part No.34009)
Yukon Gear – Replacement Chrome Cover For Dana 30 Standard Rotation (Part No.32003)
Yukon Gear – Dura Grip For Dana 44, 30 Spline, 3.73 & Down (Part No.26026)
from
$856.99
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects.
Product Features:
See More
Product Features:
- Fits Dana Spicer 44 with 30 spline axles
- 3.73 ratio and down only
- 4-spring, clutch style positraction
- Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
- Fully rebuildable
- Assembled in the USA
Omix – Manual Trans Input Shaft Bearing (Part No.18884.01)
from
$37.99
Is your T170 transmission not shifting right? Do you cringe from the grinding noises when you shift? Omix-ADA has the T170 internal parts you need to fix your Jeep’s transmission. Fix it and enjoy your ride.
Product Features:
See More
Product Features:
- Front
- OE Style
- Direct Fit
- Limited 5 Year Warranty
Felpro – Axle Housing Cover Gasket (Part No.RDS 6629)
from
$6.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Yukon Gear – Crush Sleeve (Part No.33085)
from
$9.99
Crush Sleeve for Model 20, Ford 10.25″, 10.5″, 7.5″, 8.8″, 9 3/8″, 9″ & 9.75″. .480″ long.
Product Features:
See More
Product Features:
- Crush sleeve for AMC Model 20, Ford 10.25″, 10.5″, 7.5″, 8.8″, 9″ and 9.75″
- 0.480″ tall
Omix – Differential Carrier (Part No.16503.20)
from
$122.99
Changing to new ring and pinion gear ratio? You may need a new differential carrier depending on the gear ratio break. Or maybe your diff blew up? Either way, Omix-ADA has you covered. We have dozens of differential carriers to meet your needs.
Product Features:
See More
Product Features:
- OE Style
- Direct Fit
- Limited 5 Year Warranty
National – Multi Purpose Seal (Part No.472635)
from
$15.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Yukon Gear – Replacement Yoke For Dana 44 With 10 Spline And A 1310 U/Joint Size (Part No.41016)
from
$149.99
Yukon replacement yoke for Dana 44 with 10 spline and a 1310 U/joint size. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring. This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects. This yoke does not come with straps.
Product Features:
See More
Product Features:
- Fits Dana Spicer 30 and 44
- 10 spline
- 1310 u-joint size
- Outside snap ring design
- 3.219″ snap ring span
- 1.062″ cap diameter
- Strap style
Idemitsu – Type HP Automatic Transmission Fluid – 1 qt (Part No.30040099-75000C)
from
$13.79
Formulated to meet the specific requirements of Subaru vehicles equipped with conventional (non-CVT) transmissions up to model year 2005. Recommended for service-fill in all Subaru automatic transmissions where SUBARU ATF HP is specified. Fuel economy demands and more sophisticated electronic controls have made automatic transmissions not only more complex, but also unique to each vehicle manufacturer. Long gone are the days of having just a couple choices of automatic transmission fluid type. IDEMITSU is the factory fill Automatic Transmission Fluid (ATF) supplier to most Asian imports. IDEMITSU application-specific ATF products match the exact friction materials and performance requirements of each different vehicle model for which they are made.
Product Features:
See More
Product Features:
- Excellent resistance to oxidation and thermal breakdown provide long fluid life and extended protection
- Precisely engineered frictional characteristics guarantee smooth shifting and outstanding anti-shudder performance
- Provides superior cleanliness, maintaining the transmission free of sludge and varnish deposits
- Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
- Advanced anti-wear technology provides maximum protection to gears and bearings
Yukon Gear – Replacement Carrier Shim Kit For Dana 30 & 44 With 19 Spline Axles (Part No.55018)
from
$26.99
Product Features:
See More
- Carrier shim kit for Dana Spicer 30 and Dana Spicer 44 with 19 spline axles
Yukon Gear – 8.75" Chrysler & 55P Chevy Power Lok Clutches, Model 20 Also, Posi (Part No.16148)
from
$275.99
8.75″ Chrysler & 55P Chevy Power Lok clutches, Model 20 also, POSI.
Product Features:
See More
Product Features:
- Clutch kit
- Fits Chrysler 8.75″, 1955-1964 GM passenger car and AMC Model 20 Powr Lok positraction
Crown Auto Jeep Replacmnt – OE Replacement, With Retaining Plates/ Felt Seal/ Rubber Seal (Part No.J0915664)
from
$15.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Leading Manufacturer Of Quality Replacement Parts For Jeep
- Meets Standards For Quality
- Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
- Improve The Performance
- Easy Installation
Yukon Gear – Dana 30/44 Spindle Nut Kit Replacement (Part No.10053)
from
$52.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. Replacement spindle nut and washer kit for Dana 30 & Dana 44, CJ and Scout.
Product Features:
See More
Product Features:
- Spindle nut and washer kit for Jeep CJ and Scout front
- Includes spindle nut and washers
- Services one side
MOOG Driveline Products – Double Cardan CV Centering Yoke (Part No.607)
from
$109.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Machined bodies to meet the tight tolerances
- Forged and cast material to meet the performance requirement
- Minimize the flash lines for less interference
- Cleaning process induces compressive strength for increased performance
- Machined and threaded holes for mounting ease
- Rust preventative added for longer shelf life
Yukon Gear – 1541H Alloy 2 Pieces Left Hand Short Axle For Model 20 ( ’76-’83 CJ5, And ’76-’81 CJ7) (Part No.21646)
from
$204.99
Yukon 1541H alloy 2 pieces left hand short axle for Model 20 ( ’76-’83 CJ5, and ’76-’81 CJ7) with a length of 26-1/4″ inches long and 29 splines. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H alloy axles come with a five year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- 29 spline
- 26.25″ long
- Fits AMC Model 20 in 1976-1983 CJ5 and 1976-1981 CJ7
- Two piece axle
- Left hand side
- Does not include hub
Crown Auto Jeep Replacmnt – Model 20 Rear Axle, Rubber (Part No.J3208474)
from
$8.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Leading Manufacturer Of Quality Replacement Parts For Jeep
- Meets Standards For Quality
- Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
- Improve The Performance
- Easy Installation
USA Standard Gear – Spartan Locker for Dana 30 Differential with 27 Spline Axles, Includes Heavy-duty Cross Pin Shaft (Part No.17000)
from
$602.99
The Spartan Locker, by USA Standard Gear, provides reliable traction at a low cost. Give your vehicle great traction and save some cash. Choose a Spartan Locker for better traction. The Spartan locker by USA standard gear is a mechanical locker that replaces the spiders in a standard case. The Spartan locker’s design does not use the thrust washers and has a revolutionary spring and pin design that makes installation a snap! The couplers and drivers are made from 9310 steel, for added strength. Each Spartan locker carries a one year warranty against defect. Does not fit Std. JK Carrier. Use YC D706008
Product Features:
See More
Product Features:
- Fits Dana Spicer 30 with 27 spline axles
- Made from 9310 steel for added strength
- Replaces the spiders in a standard carrier case
National – Shaft Repair Sleeve (Part No.99112)
from
$36.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
USA Standard Gear – Master Overhaul Kit for the Dana 44 Differential with 19 Spline (Part No.37084)
from
$378.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.
Product Features:
See More
Product Features:
- Fits Dana Spicer 44 with 19 spline axles
- Uses Koyo bearings and races
- Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush and gasket.
Spicer – Universal Joint (Part No.5-1310X)
from
$35.99
You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you’re getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
See More
Yukon Gear – Pinion Install Kit For Dana 27 Differential (Part No.13013)
from
$253.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.
Product Features:
See More
Product Features:
- Fits Dana Spicer 27
- Included are pinion bearings and races, pinion seal, pinion nut, complete pinion shim kit, and marking compound with brush.
Omix – Drive Shaft Slip Yoke (Part No.16580.54)
from
$115.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.
Product Features:
See More
Product Features:
- Steel
- Front
- OE Style
- Direct Fit
- Limited 5 Year Warranty
Yukon Gear – Dana 30 & Dana 44 Power Lok Bolt, Left Hand, & 8.75" Chrysler & 55P (Part No.33234)
from
$21.99
Dana 30 & Dana 44 Power Lok bolt, left hand, & 8.75″ Chrysler & 55P.
Product Features:
See More
Product Features:
- Power Lok case bolt for Dana Spicer 30, Dana Spicer 44, Chrysler 8.75″ and 1955-1964 GM passenger car
- Left hand thread
Yukon Gear – Set Up Bearing (Part No.56036)
from
$172.99
Set-up carrier bearing kit (2 bearings, no races) LM501349. No return.
Product Features:
See More
Product Features:
- Set up bearing kit
- Fits Dana Spicer 30
- Easily slips on and off carrier journals to allow for easier carrier shim adjustment
Yukon Gear – The Carrier Bearing Puller (Part No.56034)
from
$689.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.
Product Features:
See More
Product Features:
- Carrier bearing puller
- Works with an impact gun to safely and easliy remove carrrier bearings
- Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
Popular 1965 Jeep CJ5 Drivetrains Categories
1965 Jeep CJ5 Drivetrains
You count on your 1965 Jeep CJ5 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 251 Drivetrains ranging in price from $1.99 to $1,302.99, you’re sure to find everything you need for your 1965 Jeep CJ5.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 17 different brands like Moog, DriveWorks, and Spicer. 1965 Jeep CJ5 Drivetrains start as low as $1.99!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 442 extensive product reviews on 1965 Jeep CJ5 Drivetrains. Some of the top-rated Drivetrains products we carry are Universal Joint with 3.7 stars and Universal Joint with 3.0 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1965 Jeep CJ5 below to get started!
Top-Rated Drivetrains Brands For Your 1965 Jeep CJ5
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1965 Jeep CJ5 running right for years to come. In our inventory you’ll find brands like Moog, DriveWorks, Spicer, and even more.
Popular MOOG Driveline Products Drivetrains
You’ll find popular MOOG Driveline Products brand products across Universal Joints. All are waiting to get your 1965 Jeep CJ5 back on the road. Some of the top-rated MOOG Driveline Products products in these categories are:
Top-Rated MOOG Driveline Products Drivetrains
If MOOG Driveline Products are what you’re looking for, our inventory holds plenty. We stock MOOG Driveline Products brand Drivetrains for your 1965 Jeep CJ5, and some of our most reviewed MOOG Driveline Products parts include:
FAQs for 1965 Jeep CJ5 Drivetrains
What are the most purchased Drivetrains for the 1965 Jeep CJ5?
Out of 251 Drivetrains for the 1965 Jeep CJ5, the most popular in our inventory are:
What are the top-rated 1965 Jeep CJ5 Drivetrains?
Top-rated Drivetrains for your 1965 Jeep CJ5 based on customer reviews/ratings are:
from
$45.49
(1)
Shaft Repair Sleeve
“To use this sleeve on a torque converter, the supplied tool isn’t long enough. However a piece of PVC pipe can work. (normally this is used on a harmo”
