1965 International M1100 Performance and Racing Products
More 1965 International M1100 Performance and Racing Products Categories
If you’re looking for an original Performance and Racing Products replacement for a 1965 International M1100, you can search through our selection below. You’ll also find aftermarket and OEM Performance and Racing Products to meet your needs.
Essential 1965 International M1100 Performance and Racing Products
Edelbrock – Intake Manifold replacement top gasket (Part No.6989)
from
$19.99
Replacement gasket for Edelbrock tunnel ram intake. Use with intake PN(7115). Base PN(7190). Top PN(7191). One gasket only.
Product Features:
See More
Product Features:
- Replacement Gasket for Edelbrock Tunnel Ram Intake
- Use w/Intake PN[7115]/Base PN[7190]/Top PN[7191]
- One Gasket Only
Edelbrock – Performer 2-O Intake Manifold for 1965-90 Big-Block Chevy w/Oval Port Heads (Part No.2161)
from
$368.99
Product Features:
See More
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 deg. Firing Order
- Patented Runner Design Ensures Broad Torque Curve
- Excellent Throttle Response and Mid-Range Power
- 50-State Street Legal if Correct Carburetor Used
- Will Not Fit Under Corvette Hoods
- Available in Multiple Finishes
- Use Choke Rod PN[9179] for Stock Carburetor
Edelbrock – Torker II 2-O Big Block Chevy Intake Manifold (Part No.5061)
from
$432.99
use Performer 2-O #2161.
Product Features:
See More
Product Features:
- 2500 to 6500 RPM High Performance Street Engines
- Single-Plane Low-Rise Intake Good for High RPM
- Ideal for Applications with Limited Hood Clearance
- For Top-End HP and Adequate Throttle Response
- Not for Mileage or Emissions Applications
- Use with Large Oval Port Heads (1975 and Earlier)
- Will fit Under Corvette Hood Without Modifications
- Not For Tall Block V8 Engines
Edelbrock – Side-Mount Throttle Linkage for B/B Chevy #7075 Victor 2-R Manifold (Part No.7077)
from
$224.99
Product Features:
See More
- Steel Material
- Sideways Orientation
- Adjustable
- 2-Barrel Configuration
- Made In The USA
K&N – Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration (Part No.E-1080)
from
$89.99
K&N performance High-Flow Air Filters are engineered to improve engine performance. Unlike disposable paper filters which must be frequently replaced, K&N Air Filters are washable, reusable, and engineered to last for the life of your vehicle or outdoor power small engine. Engineered to fit easily into your factory air box, installation can be completed in a matter of minutes! K&N develops and tests each product on the world┐s toughest race tracks, so we can bring the highest level of performance to your daily driving. Join the millions of customers who have saved money and improved vehicle performance by upgrading to K&N filtration.
Product Features:
See More
Product Features:
- ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as improve overall engine performance
- RUGGED CONSTRUCTION: K&N Air Filters are manufactured with durable, premium materials and state-of-the-art construction methods to last a lifetime
- 4 LAYERS OF PROTECTION: Multiple layers of premium cotton gauze treated with a specially-designed tacking agent work together to create an intricate mesh of engine filter media that is designed to block and trap harmful contaminants
- CLEAN ONCE EVERY 5 YEARS: Engine air filter only needs cleaning every 75,000 miles under normal highway driving conditions (based on the average miles driven per year of 15,000 miles)
- ULTIMATE LONGEVITY: No-hassle lifetime warranty on stock replacement K&N air filters- limitations apply
- EASY INSTALLATION: K&N Air Filters are pre-treated and ready to drop into your factory air box- they are one of the easiest and most cost-effective vehicle upgrades for quick performance gains
- ECO-FRIENDLY: Using a washable, reusable engine air filter helps reduce replacement air filter waste- a K&N air filter is designed to last longer than 10 or more disposable filters
- MADE IN USA: K&N Air Filters are proudly made in the USA for trusted quality & reliability
Fram – High Perf. Full-Flow Lube Spin-on (Part No.HP1)
from
$16.99
FRAM Racing® filters are designed with a heavy-gauge tapping plate and an extra-thick* steel can that is able to withstand the high pressure flexing caused by demanding driving conditions. A spiral-shaped center tube provides protection against collapse, and tough steel end caps add even more durability. A screen-over 22psi filter bypass valve provides additional protection against larger contaminants.**
Product Features:
See More
Product Features:
- Proven protection for up to 10,000 miles
- Engineered for use with synthetic or conventional motor oils
- Filter media is a blend of fiber and resin that captures 95% of the dirt particles
- The perfect balance of dirt-trapping efficiency and dirt-holding capacity
K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-2003)
from
$22.29
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.
Product Features:
See More
Product Features:
- HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
- VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
- PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
- EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
- EASY TO REMOVE: Fast and easy Wrench-Off removal
- HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
- HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
Mallory – Unilite Ignition Module (Part No.605)
from
$85.29
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.
Product Features:
See More
Product Features:
- Service Part
- No Moving Parts To Wear Out
- Self Contained Unit
- Can Drive OEM
- Can Drive High Performance Ignition Coils
Mallory – Distributor Wiring Harness (Part No.29349)
Popular 1965 International M1100 Performance and Racing Products Categories
1965 International M1100 Performance and Racing Products
You count on your 1965 International M1100 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Performance and Racing Products. With 8 Performance and Racing Products ranging in price from $16.99 to $432.99, you’re sure to find everything you need for your 1965 International M1100.
Brands matter. If you want to shop a specific Performance and Racing Products brand, we stock 4 different brands like Fram, Mallory, and K&N. 1965 International M1100 Performance and Racing Products start as low as $16.99!
One of the best ways to find top quality OEM or aftermarket Performance and Racing Products is by asking professionals. Short of that, you can shop with confidence thanks to our 57 extensive product reviews on 1965 International M1100 Performance and Racing Products.
Did we mention you can order your Performance and Racing Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Performance and Racing Products inventory for your 1965 International M1100 below to get started!
Top-Rated Performance and Racing Products Brands For Your 1965 International M1100
Trusted Performance and Racing Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1965 International M1100 running right for years to come. In our inventory you’ll find brands like Fram, Mallory, K&N, and even more.
Popular K&N Performance and Racing Products
You’ll find popular K&N brand products across Performance Air Filters. All are waiting to get your 1965 International M1100 back on the road. Some of the top-rated K&N products in these categories are:
from
$89.99
(1)
Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration
Performance Air Filters
Top-Rated Performance and Racing Products
If are what you’re looking for, our inventory holds plenty. We stock brand Performance and Racing Products for your 1965 International M1100, and some of our most reviewed parts include:
FAQs for 1965 International M1100 Performance and Racing Products
What are the most purchased Performance and Racing Products for the 1965 International M1100?
Out of 8 Performance and Racing Products for the 1965 International M1100, the most popular in our inventory are:
from
$224.99
This product is not rated
Side-Mount Throttle Linkage for B/B Chevy #7075 Victor 2-R Manifold
Performance Intake Manifolds
