1965 International D1200 Cooling and Climate Controls
More 1965 International D1200 Cooling and Climate Controls Categories
If you’re looking for an original Cooling and Climate Controls replacement for a 1965 International D1200, you can search through our selection below. You’ll also find aftermarket and OEM Cooling and Climate Controls to meet your needs.
Essential 1965 International D1200 Cooling and Climate Controls
National – Bearings (Part No.203)
from
$19.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Imperial – Thermostatic Fan Control – Preset (Part No.226206)
from
$38.49
Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.
Product Features:
See More
Product Features:
- Preset thermostatic fan control
- 185°F preset
- For use with Imperial electric fans
- Probe installs into radiator fins
Carquest Premium – Engine Cooling Fan Module (Part No.ACC1313)
from
$94.99
All modern vehicles consist of several independent operating systems controlled by a main system processor with independent sub-processors. The sub-processors provide class 2 serial information data to the main processor while handling the operation of the system and carry the circuit load to protect the main operating system. When replacing any level processor programming may be needed to enter the unit into the vehicles main operating system.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Imperial – Electric Fan 16" Diameter (Part No.226116)
from
$92.99
Electric fan with 16″ diameter. Imperial electric fans are reversible for push or pull operation and are designed with a thin, aerodynamic profile for applications with limited space.
Product Features:
See More
Product Features:
- Rapid-Cool® Thin-Line electric fans
- 16″ diameter
- 1,400 CFM
- Use as a pusher or puller fan
Imperial – Electric Fan – 14" Diameter (Part No.226114)
from
$99.99
Product Features:
See More
- Motors built and tested to quality specifications
- 14 in. universal fit reversible fan
- 1250 CFM
- UNIVERSAL fan, NOT a direct OE replacement. Measure core and verify space.
Factory Air – Cap & Valve A/C System Seal Kit (Part No.26777)
from
$16.99
High quality OE replacement part with all components needed to complete the job
Product Features:
See More
Product Features:
- All the seals needed to complete the job
- Compatible with both R12 and R134a refrigerants
- SUV and rear air applications
- Application specific
Felpro – Engine Water Pump Gasket (Part No.12880)
from
$3.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design
- Manufactured for the sealing repair environment
- Validated for fit, form, and function
- Quality that you can trust
Felpro – Engine Coolant Outlet Gasket (Part No.12485)
from
$1.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design
- Manufactured for the sealing repair environment
- Validated for fit, form, and function
- Quality that you can trust
Carquest Premium – Standard Thermostat: 180 Degrees (Part No.13478)
from
$10.99
Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.
Product Features:
See More
Product Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
Carquest Premium – Standard Thermostat: 195 Degrees (Part No.13479)
from
$10.49
Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.
Product Features:
See More
Product Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
Carquest Premium – Standard Thermostat: 160 Degrees (Part No.13476)
from
$10.99
Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.
Product Features:
See More
Product Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
Carquest Premium – Radiator Cap: 7 PSI (Part No.10228)
from
$6.29
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.
Product Features:
See More
Product Features:
- Maintains proper cooling system pressure
- Easy installation and removal
- 100% tested to ensure proper pressure and longevity
- Meets all OEM specifications
Carquest Premium – Radiator Cap Tester Adapter (Part No.12552)
from
$14.29
Tester adapter for the MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.
Product Features:
See More
Product Features:
- Machined metal construction
- Works with MT-300 pressure tester
- Tests coolant caps
- Professional quality
Carquest Premium – Universal Fan Clutch – 7" Thermal Regular Duty (Part No.215049)
from
$49.99
Product Features:
See More
- Designed, tested, and built by application
- OE performance, fit, and appearance
- Precision machined
- Out of box installation
Carquest Premium – Universal Fan Clutch – Non-Thermal (Part No.211049)
from
$47.49
Product Features:
See More
- Designed, tested, and built by application
- OE performance, fit, and appearance
- Precision machined
- Out of box installation
Carquest Premium – Temperature Sender With Gauge (Part No.WTC1097)
from
$16.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
- Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
- Brass sensor housing precision machined to meet or exceed OE thermal conductivity
- OE precision matched thermistor position for correct output parameters
- Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
Driveworks Water Pumps – Water Pump (Part No.59-8564)
from
$136.99
Using advanced re-engineering materials and processes, our remanufactured water pumps match O.E. fit and performance. Each unit is supplied with new, unitized seals and the proper O.E.-specified bearing design to meet the specific radial and axial load re
Product Features:
See More
Product Features:
- 100% leak testing and hub-pull testing ensures reliable performance.
- O.E.-supplied NEW unitized seals ensure long-lasting, trouble-free performance.
- The proper O.E. specified bearing design is installed to meet the specific radial and axial load requirements of each application. This ensures longer bearing life and reliable performance.
- Thermostat seal and mounting gasket are supplied for ease of installation (where applicable).
Gates – Heavy-Duty Engine Water Pump (Part No.42111HD)
from
$109.99
Product Features:
See More
- Our heavy-duty water pump o+ering is designed to handle severe and rigorous conditions
- 100 percent fully tested unitized bearings and seals
- Computerized machined surfaces for proper fit and sealing
- Gates heavy-duty water pumps are represented as a part number with an HD suffix
- Warranty: 18 months or 150,000 miles/5,400 hours, whichever comes first
- New pumps manufactured to ISO/TS 16949 standards
Driveworks Water Pumps – Water Pump (Part No.59-8512)
from
$84.99
Using advanced re-engineering materials and processes, our remanufactured water pumps match O.E. fit and performance. Each unit is supplied with new, unitized seals and the proper O.E.-specified bearing design to meet the specific radial and axial load re
Product Features:
See More
Product Features:
- 100% leak testing and hub-pull testing ensures reliable performance.
- O.E.-supplied NEW unitized seals ensure long-lasting, trouble-free performance.
- The proper O.E. specified bearing design is installed to meet the specific radial and axial load requirements of each application. This ensures longer bearing life and reliable performance.
- Thermostat seal and mounting gasket are supplied for ease of installation (where applicable).
Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T2094)
from
$104.99
Carquest Premium water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, hub, bearings, gaskets and seals are designed for long-lasting service life. These water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.
Product Features:
See More
Product Features:
- 100% tested for reliable performance
- Durable housing features precisely machined mounting surface for proper sealing and fitment
- Equipped with weep chamber or similar feature to help prevent unnecessary replacement
- Included heavy-duty unitized bearings, pressed-on hubs and optimal impeller clearance for a long-lasting water pump
- All gaskets or seals necessary for water pump are included
- This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
- This pump is driven by the timing chain; see vehicle manufacturer recommendation for replacement of timing components
- This pump is driven by the timing belt; see vehicle manufacturer recommendation for replacement of timing components
Driveworks Water Pumps – Water Pump (Part No.59-8147)
from
$153.99
Using advanced re-engineering materials and processes, our remanufactured water pumps match O.E. fit and performance. Each unit is supplied with new, unitized seals and the proper O.E.-specified bearing design to meet the specific radial and axial load re
Product Features:
See More
Product Features:
- 100% leak testing and hub-pull testing ensures reliable performance.
- O.E.-supplied NEW unitized seals ensure long-lasting, trouble-free performance.
- The proper O.E. specified bearing design is installed to meet the specific radial and axial load requirements of each application. This ensures longer bearing life and reliable performance.
- Thermostat seal and mounting gasket are supplied for ease of installation (where applicable).
Popular 1965 International D1200 Cooling and Climate Controls Categories
1965 International D1200 Cooling and Climate Controls
You count on your 1965 International D1200 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Cooling and Climate Controls. With 28 Cooling and Climate Controls ranging in price from $1.49 to $153.99, you’re sure to find everything you need for your 1965 International D1200.
Brands matter. If you want to shop a specific Cooling and Climate Controls brand, we stock 7 different brands like Imperial, Carquest Premium, and Factory Air. 1965 International D1200 Cooling and Climate Controls start as low as $1.49!
One of the best ways to find top quality OEM or aftermarket Cooling and Climate Controls is by asking professionals. Short of that, you can shop with confidence thanks to our 964 extensive product reviews on 1965 International D1200 Cooling and Climate Controls. Some of the top-rated Cooling and Climate Controls products we carry are Electric Fan – 14" Diameter with 3.5 stars and Radiator Cap: 7 PSI with 4.8 stars.
Did we mention you can order your Cooling and Climate Controls from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Cooling and Climate Controls inventory for your 1965 International D1200 below to get started!
Top-Rated Cooling and Climate Controls Brands For Your 1965 International D1200
Trusted Cooling and Climate Controls OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1965 International D1200 running right for years to come. In our inventory you’ll find brands like Imperial, Carquest Premium, Factory Air, and even more.
Popular Carquest Premium Cooling and Climate Controls
You’ll find popular Carquest Premium brand products across Engine Cooling Parts. All are waiting to get your 1965 International D1200 back on the road. Some of the top-rated Carquest Premium products in these categories are:
Top-Rated Imperial Cooling and Climate Controls
If Imperial are what you’re looking for, our inventory holds plenty. We stock Imperial brand Cooling and Climate Controls for your 1965 International D1200, and some of our most reviewed Imperial parts include:
FAQs for 1965 International D1200 Cooling and Climate Controls
What are the most purchased Cooling and Climate Controls for the 1965 International D1200?
Out of 28 Cooling and Climate Controls for the 1965 International D1200, the most popular in our inventory are:
What are the top-rated 1965 International D1200 Cooling and Climate Controls?
Top-rated Cooling and Climate Controls for your 1965 International D1200 based on customer reviews/ratings are:
from
$6.29
(8)
Radiator Cap: 7 PSI
“This is a lower PSI cap for a V10 – fits just like the factory 16psi cap.”
