1965 Ford Mustang Performance Exhaust Products

Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.

Product Features:

• Long Tube Lengths
• Long Transition Collectors
• Monstrous Low-Mid Range Torque
• Keep Top End Horsepower
• Provides Finest Fit
• Most Durable Design Available

Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.

Product Features:

• Long Tube Lengths
• Long Transition Collectors
• Monstrous Low-Mid Range Torque
• Keep Top End Horsepower
• Provides Finest Fit
• Most Durable Design Available

LS1 full length engine swap header fits 66-72 Chevelle, El Camino, Monte Carlo and Sprint applications. Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.

Product Features:

• High Performance
• Affordable
• Durable 16 Gauge Material
• Welds Easier
• Lasts Longer
• Heat Cured
• High Heat Resistant

Product Features:

• Fuel Economy From The Engine
• Leak Test For Max Performance
• Ceramic Headers
• Rust And Corrosion Resistance
• Mandrel-Formed Power Plenum
• Leakproof O-Ringed Port Seals
• Include All Mounting Hardware

Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.

Product Features:

• Long Tube Lengths
• Long Transition Collectors
• Monstrous Low-Mid Range Torque
• Keep Top End Horsepower
• Provides Finest Fit
• Most Durable Design Available

LS1 full length engine swap header fits 66-72 Chevelle, El Camino, Monte Carlo and Sprint applications. Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.

Product Features:

• High Performance
• Affordable
• Durable 16 Gauge Material
• Welds Easier
• Lasts Longer
• Heat Cured
• High Heat Resistant

Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.

Product Features:

• Long Tube Lengths
• Long Transition Collectors
• Monstrous Low-Mid Range Torque
• Keep Top End Horsepower
• Provides Finest Fit
• Most Durable Design Available

Graphite impregnated facing and a steel expanded metal core. Superior tensile strength. Resists cracking and withstands intense heat. Resists deteriorating. Anti-stick properties and easy removal for disassembly.

Product Features:

• Graphite-impregnated facing
• Steel expanded metal core
• Superior tensile strength
• Resists cracking
• Withstands intense heat
• Resists deteriorating
• Anti-stick properties
• Easy removal for disassembly

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

• Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
• Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
• Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
• Slotted bolt holes allow for easier header installation.
• Not intended for use in emission controlled vehicles.

Graphite impregnated facing and a steel expanded metal core. Superior tensile strength. Resists cracking and withstands intense heat. Resists deteriorating. Anti-stick properties and easy removal for disassembly.

Product Features:

• Graphite-impregnated facing
• Steel expanded metal core
• Superior tensile strength
• Resists cracking
• Withstands intense heat
• Resists deteriorating
• Anti-stick properties
• Easy removal for disassembly

Hooker’s precision-matched Super Competition header gaskets provide a sure fit and unmatched exhaust sealing. This OEM quality gasket is constructed of a thick ,.060 inch, high temperature, non-asbestos fiber laminate with a perforated steel core, which provides a superior grip and adhesion. This construction also contributes to exact fit compliance between the cylinder head and header flange, offering excellent sealing properties during extreme temperature and operating conditions.

Product Features:

• Tear Resistant
• Precisely Cut To Match Header

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

• Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
• Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
• Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
• Slotted bolt holes allow for easier header installation.
• Not intended for use in emission controlled vehicles.

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

• Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
• Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
• Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
• Slotted bolt holes allow for easier header installation.
• Not intended for use in emission controlled vehicles.

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

• Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
• Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
• Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
• Slotted bolt holes allow for easier header installation.
• Not intended for use in emission controlled vehicles.

The MagnaFlow 1999-2004 Ford Mustang Street Series Cat-Back Performance Exhaust System brings out the personality of your 4.6L 1999-2004 Ford Mustang with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 3.5in. Polished Clamp-On Single Wall Angle Cut Cut Edge tips, this Ford Mustang exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Ford Mustang’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15671 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15671 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:

• Dyno-proven performance
• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques

The Competition Series Stainless Exhaust System delivers maximum performance, reduced mass and an aggressive exhaust sound. (check local noise regs/laws)

Product Features:

• All Mandrel Bent Tubing
• 409 Stainless Steel Construction
• Increased Horsepower and Torque
• Made in USA
• Aggressive Exterior Sound with Moderate Interior Sound

For the person who is looking for a complete Header-back dual exhaust system with an aggressive tone. With easy fit in mind, these systems are mandrel bent for maximum performance and include specially selected mufflers. American Thunder systems deliver a moderate to aggressive interior and exterior tone and are suited to the enthusiast who wants their performance to be heard. Like all Flowmaster systems, the benefits include improved throttle response, power and mileage. Designed for an easy fit, these systems include all necessary parts and hardware for easy installation.

The MagnaFlow 1994-1998 Ford Mustang Street Series Cat-Back Performance Exhaust System brings out the personality of your 4.6L, 5.0L 1994-1998 Ford Mustang with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 3.5in. Polished Clamp-On Single Wall Angle Cut Cut Edge tips, this Ford Mustang exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Ford Mustang’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15638 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15638 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:

• Dyno-proven performance
• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques

The MagnaFlow 1999-2004 Ford Mustang Street Series Cat-Back Performance Exhaust System brings out the personality of your 4.6L 1999-2004 Ford Mustang with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 3.5in. Polished Clamp-On Single Wall Angle Cut Cut Edge tips, this Ford Mustang exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Ford Mustang’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15644 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15644 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:

• Dyno-proven performance
• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques

For the person who is looking for a complete Header-back dual exhaust system with an aggressive tone. With easy fit in mind, these systems are mandrel bent for maximum performance and include specially selected mufflers. American Thunder systems deliver a moderate to aggressive interior and exterior tone and are suited to the enthusiast who wants their performance to be heard. Like all Flowmaster systems, the benefits include improved throttle response, power and mileage. Designed for an easy fit, these systems include all necessary parts and hardware for easy installation.

The MagnaFlow 1999-2004 Ford Mustang Competition Series Cat-Back Performance Exhaust System 15673 brings an aggressive, attention-grabbing edge to the deep resonant exhaust note we’re so well known for. This exhaust kit is designed to enhance your 4.6L 1999-2004 Ford Mustang with dyno-proven performance made possible thanks to fast-flowing mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 3.5in. Polished Clamp-On Single Wall Angle Cut Cut Edge tips featuring a sporty finish. The exhaust system’s cat-back layout replaces your ride’s exhaust system from near the catalytic converter on back. Exhaust system 15673 is engineered to make your vehicle’s engine produce Aggressive exterior and Moderate interior sound levels, befitting its competition-oriented design. 15673’s direct-fit design makes installation a breeze thanks to the use of advanced 3D scanning techniques. This performance exhaust system is made of 100% durable and corrosion-resistant stainless steel and produced using CNC precision robotic manufacturing, all backed by MagnaFlow’s limited lifetime warranty. Please check to ensure compliance with local noise regulations.

Product Features:

• Crafted from 409 stainless steel with all mandrel-bent tubing
• Increased horsepower and torque
• Aggressive exterior sound

Product Features:

• Chrome Plated
• Show Quality
• For Custom Installations