1965 Ford Mustang Ignition Boots

DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.

Product Features:

• Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
• Identical OE end caps are designed to “click” into place for easy installation and a secure fit
• Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation

Designed to be an ideal replacement for your vehicle’s worn equipment, ACDelco Professional, premium aftermarket Auto Wire and Auto Cable products are built to meet nearly every application and budget. ACDelco meet or exceed most original manufacturers’ specifications. Built to exacting specifications, and extensively tested, ACDelco Auto Wires and Auto Cables includes our Original Equipment line for GM vehicles and a select offering of premium aftermarket Professional products for GM and non-GM vehicles. ACDelco Professional, premium aftermarket Direct Ignition Coil-on-Plug Boots seal snugly against the spark plug’s insulator, keeping moisture and contaminates out and promoting longer spark plug life. They are thoroughly engineered to meet or exceed your expectations for fit, form, and function. ACDelco Professional Direct Ignition Coil-on-Plug Boots provide the performance and dependability you expect from ACDelco.

Product Features:

• Weather tight boot seal for protection against moisture intrusion
• High temperature resistant silicone for protection against thermal overload
• Stainless steel internal spring with resistor to suppress RFI and deliver maximum voltage to the spark plug
• Premium, high-quality aftermarket spark plug boot Signs that you might need to replace your direct ignition coil-on-plug boot are:
• Engine will not start or run
• Reduced Power
• Excessive tailpipe emissions
• Check Engine Light is on
• Engine misfire
• Reduced fuel economy

Direct Ign. Coil Boo

JBA PowerCables ignition wires are less than half the resistance of most factory wires, which frees sparkenergy and increases performance! Get as much as 5+ hp gain with JBA PowerCables as tested by CarCraft Magazine.

Product Features:

• JBA Performance Exhaust W06509 Ignition Wires Ford 289/302/351 Blue
• Extra thick diameters for improved under hood appearance

The Motorcraft Ignition wire set is a direct fit OEM replacement that guarantees the same performance and quality provided by the vehicle manufacturer.

Product Features:

• OEM quality
• OEM connectors for easy Installation.
• Resistant to high temperatures, corrosion and vibration.
• Ignition noise suppressed.
• Reduces the chance of misfire
• Increases engine life
• Protects against wire set failure

Motorcraft Ignition Boots are engineered to provide original equipment performance and reliability. All Motorcraft parts undergo rigorous lab and real-world tests in order to meet strict Ford engineering standards. Terminal ends are designed to help ensure they do not separate from the cable under normal service conditions. High dialectic insulation helps maintain and control voltage delivery while reducing radio frequency interference. The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles

Product Features:

• Backed by Motorcraft’s Service Parts Warranty
• Designed for long life – key life durability testing (equivalent to 10 years/150,000 miles) is conducted in addition to on-vehicle durability testing.
• Boots must pass submerged and pressurized leak tests, as well as low temperature cycle tests.
• Durability tests subject boots to 225,000 performance cycles including temperature extremes from minus 40 degrees F to 275 degrees F.
• Motorcraft ignition components help prevent false check engine lights.

DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.

Product Features:

• Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
• Identical OE end caps are designed to “click” into place for easy installation and a secure fit
• Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation

DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.

Product Features:

• Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
• Identical OE end caps are designed to “click” into place for easy installation and a secure fit
• Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation

CARQUEST Premium coil on plug boots are engineered to restore ignition boot reliability and performance. We have OE design providing an exact direct fit for your application and the performance and durability meet or exceed OE requirements. It offers excellent heat resistance as well as maximum protection against spark loss. With durable silicone compound for resistance to high heat or abrasion.

Product Features:

• Provides excellent heat resistance as well as maximum protection against spark loss.
• Durable silicone compound for resistance to high heat or abrasion
• Spring included with the coil boot
• Design for direct compatibility
• OE design provides an exact fit for your application
• Multipack provides one time replace all COP for better deal

DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.

Product Features:

• Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
• Identical OE end caps are designed to “click” into place for easy installation and a secure fit
• Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation

These ACCEL wire sets are a true performance upgrade replacement for OE types. Efficient delivery of spark energy for a good price. Silicone boots with black wire contain zinc-plated steel terminals. Noise suppression core. Set contains 8 plug wires with coil lead.

Product Features:

• Silicone Spark Plug Boots
• 90 Degree Spark Plug Boot Angle
• 450 Degree Wire Temperature Rating
• Meets Or Exceeds OE Boot Temperature Rating
• Meets or Exceeds OE Resistance
• Cooper Core

NGK Coil on Plug Boots are built to stringent OEM tolerances, combining original equipment fit, design and outstanding durability. NGK Coil on Plug Boots are manufactured using only premium silicone and always include any required internal springs and ferrite resistors for superior performance and RFI noise suppression. Bridging the important link between ignition coil and spark plug, COP boots should always be replaced with NGK Coil on Plug Boots at the time as changing spark plugs to prevent ignition problems such as flashover.

Product Features:

• PREMIUM GRADE SILICONE: Designed to withstand harsh environments
• OEM MATCHED: Includes all required internal springs and ferrite resistors for superior performance and RFI noise suppression

Motorcraft Ignition Boots are engineered to provide original equipment performance and reliability. All Motorcraft parts undergo rigorous lab and real-world tests in order to meet strict Ford engineering standards. Terminal ends are designed to help ensure they do not separate from the cable under normal service conditions. High dialectic insulation helps maintain and control voltage delivery while reducing radio frequency interference. The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles

Product Features:

• Backed by Motorcraft’s Service Parts Warranty
• Designed for long life – key life durability testing (equivalent to 10 years/150,000 miles) is conducted in addition to on-vehicle durability testing.
• Optimized wire lengths help minimize part numbers while still providing proper fit.
• Wires are optimum lengths for easy installation.
• EPDM/Silicone wire jacket, spark plug AND coil / distributor insulators help protect against oil and high temperatures.
• Motorcraft ignition components help prevent false check engine lights.

CARQUEST Premium Spark Plug Wire Sets are engineered to restore ignition wire reliability and performance. They are designed to meet or exceed OE design requirements, performance, fit, form and function of the OE wire. Stainless steel magnetic winding del

Product Features:

• SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
• Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
• 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
• EPDM inner insulation stops power-robbing voltage leaks.
• With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
• Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
• Excellent interference suppression and consistent performance
• Easy lock terminals for more convenient installation.
• Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
• Broad coverage available for most vehicles on the road today
• Include grease pack to ensure easy installation and removal

DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.

Product Features:

• Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
• Identical OE end caps are designed to “click” into place for easy installation and a secure fit
• Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation

The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.

Product Features:

• Custom Fit For Make And Model Listed
• Wires Are Pre-Cut To Exact Specifications
• Bolt-on Performance
• Conductor core features DuPont Kevlar material for increased tensile strength
• Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
• Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately

DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.

Product Features:

• Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
• Identical OE end caps are designed to “click” into place for easy installation and a secure fit
• Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation

JBA PowerCables ignition wires are less than half the resistance of most factory wires, which frees sparkenergy and increases performance! Get as much as 5+ hp gain with JBA PowerCables as tested by CarCraft Magazine.

Product Features:

• JBA Performance Exhaust W0675 Ignition Wires 01-05 Ranger 05-10 Mustang 4.0L Red
• Extra thick diameters for improved under hood appearance

NGK Coil on Plug Boots are built to stringent OEM tolerances, combining original equipment fit, design and outstanding durability. NGK Coil on Plug Boots are manufactured using only premium silicone and always include any required internal springs and ferrite resistors for superior performance and RFI noise suppression. Bridging the important link between ignition coil and spark plug, COP boots should always be replaced with NGK Coil on Plug Boots at the time as changing spark plugs to prevent ignition problems such as flashover.

Product Features:

• PREMIUM GRADE SILICONE: Designed to withstand harsh environments
• OEM MATCHED: Includes all required internal springs and ferrite resistors for superior performance and RFI noise suppression

Product Features:

• SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
• Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
• 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
• EPDM inner insulation stops power-robbing voltage leaks.
• With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
• Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
• Excellent interference suppression and consistent performance
• Easy lock terminals for more convenient installation.
• Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
• Broad coverage available for most vehicles on the road today
• Include grease pack to ensure easy installation and removal

These ACCEL carbon and graphite core wire sets virtually eliminate RFI noise, while providing maximum conductivity for ultimate performance in any race or street application. Double silicon insulation eliminates leakage and misfire.

Product Features:

• 500 Ohms/ft. Of Resistance
• 550° F Rated Silicone Jacket
• Stainless Steel Plug Terminals
• Custom-fit Universal And Import Coverage
• Pre And Post HEI Vehicles
• Magnetic Suppression
• Fiberglass/Kevlar Core
• 500 Ohms Resistance

DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.

Product Features:

• Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
• Identical OE end caps are designed to “click” into place for easy installation and a secure fit
• Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation

The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.

Product Features:

• Bolt-on Performance
• Custom Fit For Make And Model Listed
• Wires Are Pre-Cut To Exact Specifications

CARQUEST Premium coil on plug boots are engineered to restore ignition boot reliability and performance. We have OE design providing an exact direct fit for your application and the performance and durability meet or exceed OE requirements. It offers excellent heat resistance as well as maximum protection against spark loss. With durable silicone compound for resistance to high heat or abrasion.

Product Features:

• Provides excellent heat resistance as well as maximum protection against spark loss.
• Durable silicone compound for resistance to high heat or abrasion
• Spring included with the coil boot
• Design for direct compatibility
• OE design provides an exact fit for your application
• Multipack provides one time replace all COP for better deal

The Motorcraft Direct Ignition Coil Boot is an OES replacement component that provides the same performance, durability, and service life as your factory original equipment.

Product Features:

• OES replacement part for your vehicle’s original factory component
• Offering the quality, reliability, and durability of OES
• Manufactured to OES specification for fit, form, and function

CARQUEST Premium coil on plug boots are engineered to restore ignition boot reliability and performance. We have OE design providing an exact direct fit for your application and the performance and durability meet or exceed OE requirements. It offers excellent heat resistance as well as maximum protection against spark loss. With durable silicone compound for resistance to high heat or abrasion.

Product Features:

• Provides excellent heat resistance as well as maximum protection against spark loss.
• Durable silicone compound for resistance to high heat or abrasion
• Spring included with the coil boot
• Design for direct compatibility
• OE design provides an exact fit for your application
• Multipack provides one time replace all COP for better deal

CARQUEST Premium Spark Plug Wire Sets are engineered to restore ignition wire reliability and performance. They are designed to meet or exceed OE design requirements, performance, fit, form and function of the OE wire. Stainless steel magnetic winding del

Product Features:

• SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
• Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
• 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
• EPDM inner insulation stops power-robbing voltage leaks.
• With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
• Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
• Excellent interference suppression and consistent performance
• Easy lock terminals for more convenient installation.
• Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
• Broad coverage available for most vehicles on the road today
• Include grease pack to ensure easy installation and removal

Motorcraft Plug Wires are Manufactured of premium-quality materials to strict Ford Engineering standards. High-Dielectric Insulation helps maintain and control voltage delivery while reducing Radio Frequency Interference. EPDM/Silicone wire jacket, spark plug & coil/ distributor insulators help protect against oil and high temperatures. Optimized wire lengths help minimize part numbers while still providing proper fit. Designed and Tested to Stringent Ford Standards.

Product Features:

• Backed by Motorcraft’s Service Parts Warranty
• Designed for long life – key life durability testing (equivalent to 10 years/150,000 miles) is conducted in addition to on-vehicle durability testing.
• Optimized wire lengths help minimize part numbers while still providing proper fit.
• Wires are optimum lengths for easy installation.
• EPDM/Silicone wire jacket, spark plug AND coil / distributor insulators help protect against oil and high temperatures.
• Motorcraft ignition components help prevent false check engine lights.