1965 Ford Mustang Exhaust System Kits

When it comes to performance exhaust systems, most people are looking for three things: Power, sound,and quality. JBA Exhaust Systems deliver the best of all three, giving it both great looks and performance.One of the first performance upgrades typical

Product Features:

• JBA Performance Exhaust 50-2652 2.5″ Stainless Exhaust System 65-70 Mustang Side Exit
• Large diameter stainless steel mandrel-bent tube

When it comes to performance exhaust systems, most people are looking for three things: Power, sound,and quality. JBA Exhaust Systems deliver the best of all three, giving it both great looks and performance.One of the first performance upgrades typical

Product Features:

• JBA Performance Exhaust 40-2650 2.5″ Stainless Steel Exhaust System 65-70 Mustang Exhaust
• Large diameter stainless steel mandrel-bent tube

The MagnaFlow 2015-2017 Ford Mustang Competition Series Cat-Back Performance Exhaust System 19099 brings an aggressive, attention-grabbing edge to the deep resonant exhaust note we’re so well known for. This exhaust kit is designed to enhance your 3.7L 2015-2017 Ford Mustang with dyno-proven performance made possible thanks to fast-flowing mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 4.5in. Polished Welded-On Double Wall Angle Cut Folded Edge tips featuring a sporty finish. The exhaust system’s cat-back layout replaces your ride’s exhaust system from near the catalytic converter on back. Exhaust system 19099 is engineered to make your vehicle’s engine produce Aggressive exterior and Moderate interior sound levels, befitting its competition-oriented design. 19099’s direct-fit design makes installation a breeze thanks to the use of advanced 3D scanning techniques. This performance exhaust system is made of 100% durable and corrosion-resistant stainless steel and produced using CNC precision robotic manufacturing, all backed by MagnaFlow’s limited lifetime warranty. Please check to ensure compliance with local noise regulations.

Product Features:

• Crafted from 409 stainless steel with all mandrel-bent tubing
• Increased horsepower and torque
• Aggressive exterior sound

The MagnaFlow 2015-2017 Ford Mustang Race Series Axle-Back Performance Exhaust System 19344 doesn’t leave any performance on the table with a race-ready, light weight, dyno-proven design ready to help your 5.0L 2015-2017 Ford Mustang take on any pretenders, whether on the track or the street. Exhaust kit 19344 is engineered to produce our powerful, resonant signature exhaust note at Very Aggressive exterior and Aggressive interior sound levels with an axle-back layout that replaces your vehicle’s exhaust components from near the rear axle on back. Please check to ensure compliance with local noise regulations. This Ford Mustang exhaust kit features fast-flowing mandrel bent 3in. diameter main piping that ends in a Dual Split Rear exit with 4.5in. Polished Welded-On Double Wall Angle Cut Folded Edge tips. Extensive 3D scanning during development and the use of advanced CNC precision robotic manufacturing techniques ensures that 19344’s direct-fit design fits so perfectly that you can easily install the system yourself. The durable, corrosion resistant stainless steel construction of exhaust system 19344 is backed by MagnaFlow’s limited lifetime warranty.

Product Features:

• High performance lightweight design
• Straight pipe-like sound
• Durable corrosion-resistant stainless steel construction

The MagnaFlow 2011-2012 Ford Mustang Street Series Cat-Back Performance Exhaust System brings out the personality of your 5.0L, 5.4L 2011-2012 Ford Mustang with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Folded Edge tips, this Ford Mustang exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Ford Mustang’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15589 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15589 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:

• Dyno-proven performance
• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques

The MagnaFlow 2018-2023 Ford Mustang Street Series Cat-Back Performance Exhaust System brings out the personality of your 5.0L 2018-2023 Ford Mustang with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 3 Straight-Through mufflers ending in a Quad Split Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Folded Edge tips, this Ford Mustang exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Ford Mustang’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19370 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19370 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:

• Dyno-proven performance
• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques

The MagnaFlow 1967-1970 Ford Mustang Street Series Crossmember-Back Performance Exhaust System brings enhanced engine sound and dyno-proven performance to your 3.3L, 4.1L, 4.7L, 5.0L, 5.8L, 6.4L, 7.0L 1967-1970 Ford Mustang with a healthy helping of our deep, resonant signature exhaust note at Aggressive exterior and Moderate interior sound levels. Thanks to its durable, corrosion resistant stainless steel design, this Ford Mustang exhaust system will handle whatever tarmac you decide to leave your mark on. This performance exhaust kit features a crossmember-back layout designed to replace your Ford Mustang’s exhaust system from the crossmember on back. With its fast-flowing, mandrel bent 3in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit that you can enhance with tips of your choosing, your muscle car will be sounding as awesome as it looks. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15819 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s limited lifetime construction warranty.

Product Features:

• Dyno-proven performance
• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques

The MagnaFlow 2013-2014 Ford Mustang Street Series Cat-Back Performance Exhaust System brings out the personality of your 5.0L 2013-2014 Ford Mustang with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Folded Edge tips, this Ford Mustang exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Ford Mustang’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15149 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15149 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:

• Dyno-proven performance
• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques

When it comes to performance exhaust systems, most people are looking for three things: Power, sound,and quality. JBA Exhaust Systems deliver the best of all three, giving it both great looks and performance.One of the first performance upgrades typical

Product Features:

• JBA Performance Exhaust 50-2651 2.5″ Exhaust System 65-70 Mustang Coupe/Fastback Eleanor Side Exhaust Kit 2.5″
• Large diameter stainless steel mandrel-bent tube

The MagnaFlow 1999-2004 Ford Mustang Street Series Cat-Back Performance Exhaust System brings out the personality of your 4.6L 1999-2004 Ford Mustang with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 3.5in. Polished Clamp-On Single Wall Angle Cut Cut Edge tips, this Ford Mustang exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Ford Mustang’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15671 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15671 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:

• Dyno-proven performance
• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques

When it comes to performance exhaust systems, most people are looking for three things: Power, sound,and quality. JBA Exhaust Systems deliver the best of all three, giving it both great looks and performance.One of the first performance upgrades typical

Product Features:

• JBA Performance Exhaust 40-2654 2.5″ Stainless Steel Exhaust System 67-70 Mustang Exhaust with Tips
• Large diameter stainless steel mandrel-bent tube

Flowmaster’s Outlaw Axle-back systems are race-oriented systems designed to replace original rear mounted mufflers located behind the rear axle using factory style connections. Outlaw systems deliver an ultra aggressive interior and exterior tone and are suited to the enthusiast who wants the most aggressive components they can purchase. Like all Flowmaster systems, the benefits include improved throttle response, power and mileage. Designed for an easy fit, these systems include all necessary parts and hardware for easy installation.

Product Features:

• Mandrel bent 16 gauge 409 stainless tubing
• Aggressive and powerful exterior exhaust tone
• Includes hangers and hardware for easy installation
• Axle back system
• Dyno tuned for maximum performance

For the serious performance enthusiast who demands the best of the best. For your vehicle, there is no better stainless steel than T304 and no better system than the MBRP Pro Series. With the highest chromium and nickel content of any exhaust, this is simply the best system money can buy. A performance exhaust system is much like a musical instrument. Quality engineering is important, hundreds of test Miles and hundreds of Hours are invested into every system to guarantee you the greatest sound. Durability and performance available from any exhaust system anywhere.

Product Features:

• The Lowest Bend Degree Angles And Smooth Mandrel Bends Mean That Exhaust Gases Have An Easier Path To The Tip, Move Faster And Reduce Exhaust Gas Temperatures
• Vehicle Maintains Optimal Operating Temperatures
• Fits Right The First Time. Rigorous Testing Procedures Ensure That Every Component Will Fit As Expected
• Each Kit Is Designed To Fit As Many Configurations Of The Same Vehicle As Possible
• Contains Chromium And Nickel Content Of Any Diesel Exhaust
• Easy, Bolt-On Design, Makes Easy To Install

The MagnaFlow 1999-2004 Ford Mustang Competition Series Cat-Back Performance Exhaust System 15673 brings an aggressive, attention-grabbing edge to the deep resonant exhaust note we’re so well known for. This exhaust kit is designed to enhance your 4.6L 1999-2004 Ford Mustang with dyno-proven performance made possible thanks to fast-flowing mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 3.5in. Polished Clamp-On Single Wall Angle Cut Cut Edge tips featuring a sporty finish. The exhaust system’s cat-back layout replaces your ride’s exhaust system from near the catalytic converter on back. Exhaust system 15673 is engineered to make your vehicle’s engine produce Aggressive exterior and Moderate interior sound levels, befitting its competition-oriented design. 15673’s direct-fit design makes installation a breeze thanks to the use of advanced 3D scanning techniques. This performance exhaust system is made of 100% durable and corrosion-resistant stainless steel and produced using CNC precision robotic manufacturing, all backed by MagnaFlow’s limited lifetime warranty. Please check to ensure compliance with local noise regulations.

Product Features:

• Crafted from 409 stainless steel with all mandrel-bent tubing
• Increased horsepower and torque
• Aggressive exterior sound

aFe POWER MACH Force-Xp series exhaust system is designed to get you there with speed and style. Constructed from mandrel-bent, 304 stainless steel, this exhaust system offers greater flow to deliver more torque and horsepower than the factory exhaust. This system utilizes a less-restricting, high-flow muffler to improves performance while maintaining a deep, smooth tone. 100% hand MIG-welded by certified craftsmen for proven quality and durability.

Product Features:

• Aggressive Sound, Incredible Value
• Utilizes High-Flow Stainless Steel Muffler
• Mandrel-Bent Tubing for Improved Flow
• Stainless Steel Clamps for Improved Sealing Surface

The MagnaFlow 1967-1970 Ford Mustang Street Series Crossmember-Back Performance Exhaust System 15816 brings enhanced engine sound and dyno-proven performance to your 3.3L, 4.1L, 4.7L, 5.0L, 5.8L, 6.4L, 7.0L 1967-1970 Ford Mustang with a healthy helping of our deep, resonant signature exhaust note at Moderate exterior and Mild interior sound levels. Thanks to its durable, corrosion resistant stainless steel design, this Ford Mustang exhaust system will handle whatever tarmac you decide to leave your mark on. This performance exhaust kit features a crossmember-back layout designed to replace your Ford Mustang’s exhaust system from the crossmember on back. With its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 2.75in. Polished Welded-On Single Wall Turndown Cut Edge tips, your muscle car will be sounding as awesome as it looks. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15816 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s limited lifetime construction warranty.

Product Features:

• Dyno-proven performance
• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques

When it comes to performance exhaust systems, most people are looking for three things: Power, sound,and quality. JBA Exhaust Systems deliver the best of all three, giving it both great looks and performance.One of the first performance upgrades typical

Product Features:

• JBA Performance Exhaust 40-2653 2.5″ Stainless Steel Exhaust System 65-66 2-1/2″ Mustang GT
• Large diameter stainless steel mandrel-bent tube

The MagnaFlow 2005-2009 Ford Mustang Competition Series Cat-Back Performance Exhaust System 16674 brings an aggressive, attention-grabbing edge to the deep resonant exhaust note we’re so well known for. This exhaust kit is designed to enhance your 4.6L, 5.4L 2005-2009 Ford Mustang with dyno-proven performance made possible thanks to fast-flowing mandrel bent 3in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Folded Edge tips featuring a sporty finish. The exhaust system’s cat-back layout replaces your ride’s exhaust system from near the catalytic converter on back. Exhaust system 16674 is engineered to make your vehicle’s engine produce Aggressive exterior and Moderate interior sound levels, befitting its competition-oriented design. 16674’s direct-fit design makes installation a breeze thanks to the use of advanced 3D scanning techniques. This performance exhaust system is made of 100% durable and corrosion-resistant stainless steel and produced using CNC precision robotic manufacturing, all backed by MagnaFlow’s limited lifetime warranty. Please check to ensure compliance with local noise regulations.

Product Features:

• Crafted from 409 stainless steel with all mandrel-bent tubing
• Increased horsepower and torque
• Aggressive exterior sound

The MagnaFlow 2011-2012 Ford Mustang Street Series Axle-Back Performance Exhaust System 15593 brings enhanced engine sound and dyno-proven performance to your 5.0L, 5.4L 2011-2012 Ford Mustang with a healthy helping of our deep, resonant signature exhaust note at Moderate exterior and Mild interior sound levels. Thanks to its durable, corrosion resistant stainless steel design, this Ford Mustang exhaust system will handle whatever tarmac you decide to leave your mark on. This performance exhaust kit features an axle-back layout designed to replace your Ford Mustang’s exhaust system from near the rear axle on back. With its fast-flowing, mandrel bent 3in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Folded Edge tips, your ride will be sounding as awesome as it looks. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15593 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:

• Dyno-proven performance
• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques

The MagnaFlow 2018-2023 Ford Mustang Competition Series Axle-Back Performance Exhaust System 19419 brings an aggressive, attention-grabbing edge to the deep resonant exhaust note we’re so well known for. This Ford Mustang axle-back exhaust kit is designed to enhance your 5.0L 2018-2023 Ford Mustang with dyno-proven performance made possible thanks to fast-flowing mandrel bent 3in. diameter piping that passes 2 Straight-Through mufflers ending in a Quad Split Rear exit with 4in. Black Coated Welded-On Double Wall Angle Cut Folded Edge tips featuring a sporty black powder-coated finish. The direct-fit design allows for an easy, do-it-yourself installation process. Exhaust system 19419 is engineered to make your car’s engine produce Moderate interior and Aggressive exterior sound levels, befitting its competition-oriented design. 19419 is made of 100% durable and corrosion-resistant stainless steel and produced using CNC precision robotic manufacturing, all backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty. Please check to ensure compliance with local noise regulations.

Product Features:

• Crafted from 409 stainless steel with all mandrel-bent tubing
• Increased horsepower and torque
• Aggressive exterior sound

BORLA(R) ATAK(R) (Acoustically-Tuned Applied Kinetics) Technology Is Designed For High-Performance. ATAK(R) equipped exhaust systems deliver the highest available Decibel levels in the BORLA(R) street-legal lineup and unlike inferior brands that lose significant sound quality at higher volumes, ATAK(R) is tuned like a graphic equalizer to shape and focus sound waves for optimum high-volume output. ATAK(R) technology is based on specifically-tuned attributes of the internal muffler cores, which are calibrated on a vehicle-by-vehicle basis to deliver the most desirable sound. The power of BORLA(R) Multicore(R) technology, with the sound of vehicle-specific acoustic tuning.

Product Features:

• Designed For High-Performance
• Equipped Exhaust Systems Deliver The Highest Available Decibel Levels
• Tuned Like A Graphic Equalizer To Shape And Focus Sound Waves For Optimum High-Volume Output
• Perforation Patterns, Diameters And Other Characteristics Of The Internal Cores To Optimize Sound On A Vehicle-By-Vehicle Basis
• Sound Waves Are Attenuated And Tuned While Passing And Deflecting Through Multiple Core Walls
• Exhaust Gas Velocity Maintained Throughout Temperature Range
• ATAK(R) Technology Is Based On Specifically-Tuned Attributes Of The Internal Muffler Cores, Which Are Calibrated On A Vehicle-By-Vehicle Basis To Deliver The Mostádesirableásound

aFe introduces the MACH Force XP dual axle-back exhaust system for the 11-14 Mustang GT V8-5.0L. In recent testing this system produced 18 horsepower and 15 lbs. x ft. of torque. This exhaust is constructed from 3 in. mandrel-bent, stainless steel and is MIG-welded. The system uses high-flow, stainless steel mufflers which improves performance across the power band while maintaining a great tone. To finish off this exhaust are dual 4 in. double wall, 304 stainless steel aFe laser-etched tips. This exhaust uses all factory hanger locations for a hassle-free installation. No modifications necessary. All aFe exhaust systems are engineered and manufactured in our Corona, California manufacturing facility.

Product Features:

• 3 in. Dia. 304 Stainless Steel
• 100% Hand TIG Welded
• 4 in. Double Wall Polished 304 Stainless Steel Tip
• AFE Laser Etched Tips

aFe is proud to introduce our Mach Force-Xp cat-back exhaust systems. In recent testing, this system produced +16 horsepower and +17 lbs. x ft. of torque on our in house dyno. This cat-back exhaust system utilizes 3in into 2-1/2in tubing with a clamp-on reduction tube to fit the stock connections. Remove them and combine with the aFe Power Twisted Steel down-pipes (P/N: 48-33017-HC or 48-33017-HN) for added flow and performance. This system incorporates dual, high-flow mufflers to improve performance across the power band while maintaining an aggressive sound. To finish off the exhaust, dual 4 diameter gloss black 304 stainless steel tips are included. This system includes hardware for a hassle-free installation.

Product Features:

• Produces An Astonishing 16 HP And 17 ft./lbs. Of Torque
• 3 in. To 2.5 in. Mandrel Bent Tubing
• Includes Dual; High-Flow Mufflers
• 2-To-1 Mitered Split To Eliminate Dead Zone For Improved Flow

The power of BORLA(R) Multicore technology, with the sound of vehicle-specific acoustic tuning. ATAK(R) technology is designed for high-performance purists who prefer exhaust sound over their stereos. ATAK(R) equipped exhaust systems deliver the highest available Decibel levels in the BORLA(R) street-legal lineup. ATAK(R) is tuned like a graphic equalizer to shape and focus sound waves for optimum high-volume output. ATAK(R) technology is based on specifically tuned attributes of the internal muffler cores, which are calibrated on a vehicle-by-vehicle basis to deliver the most desirable sound.

Product Features:

• Delivers The Highest Available DB (Decibel) Levels In The Street-Legal Line Up
• Tuned Like A Graphic Equalizer To Shape And Focus Sound Waves For Optimum High-Volume Output
• Based On Specifically-Tuned Attributes Of The Internal Muffler Cores, Calibrated On A Vehicle-By-Vehicle Basis To Deliver The Most Desirable Sound
• Fine-Tuned ATAK(R) Sound Differently For Each Vehicle By Combining Varying Degrees Of Solid Walls, Perforation Patterns, Diameters And Other Characteristics Of The Internal Cores
• Sound Waves Are Attenuated And Tuned While Passing And Deflecting Through Multiple Core Walls

The MagnaFlow 2015-2017 Ford Mustang Competition Series Cat-Back Performance Exhaust System 19101 brings an aggressive, attention-grabbing edge to the deep resonant exhaust note we’re so well known for. This exhaust kit is designed to enhance your 5.0L 2015-2017 Ford Mustang with dyno-proven performance made possible thanks to fast-flowing mandrel bent 3in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 4.5in. Polished Welded-On Double Wall Angle Cut Folded Edge tips featuring a sporty finish. The exhaust system’s cat-back layout replaces your ride’s exhaust system from near the catalytic converter on back. Exhaust system 19101 is engineered to make your vehicle’s engine produce Aggressive exterior and Moderate interior sound levels, befitting its competition-oriented design. 19101’s direct-fit design makes installation a breeze thanks to the use of advanced 3D scanning techniques. This performance exhaust system is made of 100% durable and corrosion-resistant stainless steel and produced using CNC precision robotic manufacturing, all backed by MagnaFlow’s limited lifetime warranty. Please check to ensure compliance with local noise regulations.

Product Features:

• Crafted from 409 stainless steel with all mandrel-bent tubing
• Increased horsepower and torque
• Aggressive exterior sound

Introducing the new aFe Power MACH Force XP dual exhaust system for the 05-09 Ford Mustang V6-4.0L. In recent testing, this system produced 12 horsepower and 16 lbs. x ft. of torque. This exhaust is constructed from 2.5in. mandrel bent, stainless steel and is MIG-welded. Dual high flow, stainless steel, single in, single out mufflers are used to maximize performance across the power band while maintaining a great tone. To finish off this exhaust aFe uses dual, laser etched, 3.5in. polished 304 stainless steel tips. Note: The V8 rear bumper cover is recommended (Ford OE Part Number 5R3Z17K835BAA). The use of the OE V6 bumper cover requires cutting and should be performed by a skilled technician.

Product Features:

• 2.5 in. Mandrel Bent 409 Stainless Steel Tubing
• 100% Hand MIG Welded
• Dual 3.5 in. 304 Stainless Steel Rolled Edge Round Tips
• Hassle Free Installation

The MagnaFlow 2011-2012 Ford Mustang Street Series Axle-Back Performance Exhaust System 15595 brings enhanced engine sound and dyno-proven performance to your 3.7L 2011-2012 Ford Mustang with a healthy helping of our deep, resonant signature exhaust note at Moderate exterior and Mild interior sound levels. Thanks to its durable, corrosion resistant stainless steel design, this Ford Mustang exhaust system will handle whatever tarmac you decide to leave your mark on. This performance exhaust kit features an axle-back layout designed to replace your Ford Mustang’s exhaust system from near the rear axle on back. With its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, your ride will be sounding as awesome as it looks. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15595 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:

• Dyno-proven performance
• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques

aFe is proud to introduce our Mach Force-Xp cat-back exhaust systems. In recent testing, this system produced +16 horsepower and +17 lbs. x ft. of torque on our in house dyno. This cat-back exhaust system utilizes 3in into 2-1/2in tubing with a clamp-on reduction tube to fit the stock connections. Remove them and combine with the aFe Power Twisted Steel down-pipes (P/N: 48-33017-HC or 48-33017-HN) for added flow and performance. This system incorporates dual, high-flow mufflers to improve performance across the power band while maintaining an aggressive sound. To finish off the exhaust, dual 4 diameter polished 304 stainless steel tips are included. This system includes hardware for a hassle-free installation.

Product Features:

• Produces An Astonishing 16 HP And 17 ft./lbs. Of Torque
• 3 in. To 2.5 in. Mandrel Bent Tubing
• Includes Dual; High-Flow Mufflers
• 2-To-1 Mitered Split To Eliminate Dead Zone For Improved Flow