1965 Ford Mustang Exhaust System Kits

Essential 1965 Ford Mustang Exhaust System Kits

MagnaFlow – Competition Series Axle-Back Performance Exhaust System (Part No.15077)

Competition Series Axle-Back Performance Exhaust System

from

$892.99
The MagnaFlow 2011-2012 Ford Mustang Competition Series Axle-Back Performance Exhaust System 15077 brings an aggressive, attention-grabbing edge to the deep resonant exhaust note we’re so well known for. This exhaust kit is designed to enhance your 5.0L 2011-2012 Ford Mustang with dyno-proven performance made possible thanks to fast-flowing mandrel bent 3in. main piping and 2 Straight-Through mufflers ending in a Quad Split Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Folded Edge tips featuring a sporty finish. The exhaust system’s axle-back layout replaces your ride’s exhaust system from near the rear axle on back. Exhaust system 15077 is engineered to make your vehicle’s engine produce Aggressive exterior and Moderate interior sound levels, befitting its competition-oriented design. 15077’s direct-fit design makes installation a breeze thanks to the use of advanced 3D scanning techniques. This performance exhaust system is made of 100% durable and corrosion-resistant stainless steel and produced using CNC precision robotic manufacturing, all backed by MagnaFlow’s limited lifetime warranty. Please check to ensure compliance with local noise regulations.

Product Features:
  • Crafted from 409 stainless steel with all mandrel-bent tubing
  • Increased horsepower and torque
  • Aggressive exterior sound
See More

MagnaFlow – Street Series Cat-Back Performance Exhaust System (Part No.19370)

Street Series Cat-Back Performance Exhaust System

from

$2161.99
The MagnaFlow 2018-2023 Ford Mustang Street Series Cat-Back Performance Exhaust System brings out the personality of your 5.0L 2018-2023 Ford Mustang with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 3 Straight-Through mufflers ending in a Quad Split Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Folded Edge tips, this Ford Mustang exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Ford Mustang’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19370 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19370 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:
  • Dyno-proven performance
  • Durable corrosion-resistant stainless steel construction
  • CNC precision robotic manufacturing techniques
See More

Borla Performance Exhaust – T-304 Ss, 2.5"Pipe Dia, With Dual Exit, Single, 4" Round Rolled Angle Cut (Part No.11895)

T-304 Ss, 2.5"Pipe Dia, With Dual Exit, Single, 4" Round Rolled Angle Cut

from

$962.99
BORLA(R) ATAK(R) (Acoustically-Tuned Applied Kinetics) Technology Is Designed For High-Performance. ATAK(R) equipped exhaust systems deliver the highest available Decibel levels in the BORLA(R) street-legal lineup and unlike inferior brands that lose significant sound quality at higher volumes, ATAK(R) is tuned like a graphic equalizer to shape and focus sound waves for optimum high-volume output. ATAK(R) technology is based on specifically-tuned attributes of the internal muffler cores, which are calibrated on a vehicle-by-vehicle basis to deliver the most desirable sound. The power of BORLA(R) Multicore(R) technology, with the sound of vehicle-specific acoustic tuning.

Product Features:
  • Designed For High-Performance
  • Equipped Exhaust Systems Deliver The Highest Available Decibel Levels
  • Tuned Like A Graphic Equalizer To Shape And Focus Sound Waves For Optimum High-Volume Output
  • Perforation Patterns, Diameters And Other Characteristics Of The Internal Cores To Optimize Sound On A Vehicle-By-Vehicle Basis
  • Sound Waves Are Attenuated And Tuned While Passing And Deflecting Through Multiple Core Walls
  • Exhaust Gas Velocity Maintained Throughout Temperature Range
  • ATAK(R) Technology Is Based On Specifically-Tuned Attributes Of The Internal Muffler Cores, Which Are Calibrated On A Vehicle-By-Vehicle Basis To Deliver The Mostádesirableásound
See More

Borla Performance Exhaust – Axle-Back Exhaust System – S-Type (Part No.11887BC)

Axle-Back Exhaust System - S-Type

from

$1006.99
Borla Performance Industries is the pioneer and leader in the design and manufacture of stainless steel performance exhaust. We began two decades ago as a manufacturer of exhaust systems for such “concours classics” as Rolls-Royce and Ferrari cars and have evolved into the premier manufacturer of today’s performance vehicles for the street, off-road, and racing.Borla is proud to offer a true “Made in the USA” product sold around the world. We are a company of motorheads, and it shows in our products, customer service, and culture. On weekends, the same Borla employees who built your exhaust or helped you with technical support can be found competing at tracks, drag strips, off-road events and car shows. Constructed using T-304 stainless steel for long life and sharp appearance, and features all welded construction for maximum durability. Unlike any other exhaust brand, Borla’systems are designed from scratch on a vehicle-by-vehicle basis. Every car or truck has unique mechanical and acoustical properties, all taken into account as we spend countless hours optimizing muffler body shapes, internal core configurations, flow dynamics,soundand more.

Product Features:
  • Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive powerful sound
  • Each system is built from premium, high-quality austenitic T-304 stainless steel
  • Ultra-smooth mandrel bends ensure maximum flow & power, and precision computer-controlled CNC manufacturing ensures an accurate fit
See More

MagnaFlow – Competition Series Cat-Back Performance Exhaust System (Part No.19099)

Competition Series Cat-Back Performance Exhaust System

from

$1514.99
The MagnaFlow 2015-2017 Ford Mustang Competition Series Cat-Back Performance Exhaust System 19099 brings an aggressive, attention-grabbing edge to the deep resonant exhaust note we’re so well known for. This exhaust kit is designed to enhance your 3.7L 2015-2017 Ford Mustang with dyno-proven performance made possible thanks to fast-flowing mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 4.5in. Polished Welded-On Double Wall Angle Cut Folded Edge tips featuring a sporty finish. The exhaust system’s cat-back layout replaces your ride’s exhaust system from near the catalytic converter on back. Exhaust system 19099 is engineered to make your vehicle’s engine produce Aggressive exterior and Moderate interior sound levels, befitting its competition-oriented design. 19099’s direct-fit design makes installation a breeze thanks to the use of advanced 3D scanning techniques. This performance exhaust system is made of 100% durable and corrosion-resistant stainless steel and produced using CNC precision robotic manufacturing, all backed by MagnaFlow’s limited lifetime warranty. Please check to ensure compliance with local noise regulations.

Product Features:
  • Crafted from 409 stainless steel with all mandrel-bent tubing
  • Increased horsepower and torque
  • Aggressive exterior sound
See More

MagnaFlow – Race Series Axle-Back Performance Exhaust System (Part No.15152)

Race Series Axle-Back Performance Exhaust System

from

$613.99
The MagnaFlow 2013-2014 Ford Mustang Race Series Axle-Back Performance Exhaust System 15152 doesn’t leave any performance on the table with a race-ready, light weight, dyno-proven design ready to help your 5.0L 2013-2014 Ford Mustang take on any pretenders, whether on the track or the street. Exhaust kit 15152 is engineered to produce our powerful, resonant signature exhaust note at Very Aggressive exterior and Aggressive interior sound levels with an axle-back layout that replaces your vehicle’s exhaust components from near the rear axle on back. Please check to ensure compliance with local noise regulations. This Ford Mustang exhaust kit features fast-flowing mandrel bent 3in. diameter main piping that ends in a Dual Split Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Folded Edge tips. Extensive 3D scanning during development and the use of advanced CNC precision robotic manufacturing techniques ensures that 15152’s direct-fit design fits so perfectly that you can easily install the system yourself. The durable, corrosion resistant stainless steel construction of exhaust system 15152 is backed by MagnaFlow’s limited lifetime warranty.

Product Features:
  • High performance lightweight design
  • Straight pipe-like sound
  • Durable corrosion-resistant stainless steel construction
See More

aFe POWER – MACH Force-Xp Cat Back Exhaust System: Black Tip, 304 Stainless Steel, Gain up to 16 HP (Part No.49-33084-B)

MACH Force-Xp Cat Back Exhaust System: Black Tip, 304 Stainless Steel, Gain up to 16 HP

from

$1713.99
aFe is proud to introduce our Mach Force-Xp cat-back exhaust systems. In recent testing, this system produced +16 horsepower and +17 lbs. x ft. of torque on our in house dyno. This cat-back exhaust system utilizes 3in into 2-1/2in tubing with a clamp-on reduction tube to fit the stock connections. Remove them and combine with the aFe Power Twisted Steel down-pipes (P/N: 48-33017-HC or 48-33017-HN) for added flow and performance. This system incorporates dual, high-flow mufflers to improve performance across the power band while maintaining an aggressive sound. To finish off the exhaust, dual 4 diameter gloss black 304 stainless steel tips are included. This system includes hardware for a hassle-free installation.

Product Features:
  • Produces An Astonishing 16 HP And 17 ft./lbs. Of Torque
  • 3 in. To 2.5 in. Mandrel Bent Tubing
  • Includes Dual; High-Flow Mufflers
  • 2-To-1 Mitered Split To Eliminate Dead Zone For Improved Flow
See More

Borla Performance Exhaust – T-304 Ss, 2.5"Pipe Dia, Dual Exhaust With Dual Exit, 4"Dia X 12" L Round (Part No.140458)

T-304 Ss, 2.5"Pipe Dia, Dual Exhaust With Dual Exit, 4"Dia X 12" L Round

from

$1200.99
With over 400 internal muffler designs based on the technologies shown here, BORLA(R) offers exhaust systems to suit every vehicle, driving style and sound preference. Muffler body shapes, internal core characteristics, flow dynamics and more are tuned and harmonized to maximize performance and pure driving excitement. BORLA(R) ATAK(R) (Acoustically-Tuned Applied Kinetics) technology is designed for high-performance purists who prefer exhaust sound over their stereos. ATAK(R)-equipped exhaust systems deliver the highest available Decibel levels in the BORLA(R) street-legal lineup. And unlike inferior brands that lose significant sound quality at higher volumes, ATAK(R) is tuned like a graphic equalizer to shape and focus sound waves for optimum high-volume output. ATAK(R) technology is based on specifically-tuned attributes of the internal muffler cores, which are calibrated on a vehicle-by vehicle basis to deliver the most desirable sound.

Product Features:
  • ATAK(R) (Acoustically-Tuned Applied Kinetics) Technology Is Designed For High-Performance
  • ATAK(R) Equipped Exhaust Systems Deliver The Highest Available Decibel Levels
  • ATAK(R) Is Tuned Like A Graphic Equalizer To Shape And Focus Sound Waves For Optimum High-Volume Output
  • ATAK(R) Technology Is Based On Specifically-Tuned Attributes Of The Internal Muffler Cores
See More

Flowmaster Inc. – Axle-back System 409S – Dual Rear Exit – American Thunder – Aggressive (Part No.817460)

Axle-back System 409S - Dual Rear Exit - American Thunder - Aggressive

from

$553.99
This aggressive sounding system is designed to replace the original rear mounted mufflers located behind the rear axle. With easy fit in mind, the system is mandrel bent for maximum performance and includes specially selected mufflers to support the performance image of the car. As an America Thunder system, it delivers an aggressive exterior tone with moderate interior sound level that is suited to the enthusiast who wants their performance to be heard. Like all Flowmaster systems, the benefits include improved throttle response, power and mileage. Designed for an easy fit, the system includes all necessary parts and hardware for easy installation.
See More

MagnaFlow – Street Series Cat-Back Performance Exhaust System (Part No.15717)

Street Series Cat-Back Performance Exhaust System

from

$869.99
The MagnaFlow 1999-2004 Ford Mustang Street Series Cat-Back Performance Exhaust System brings out the personality of your 3.8L, 3.9L 1999-2004 Ford Mustang with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 3in. Polished Clamp-On Single Wall Angle Cut Cut Edge tips, this Ford Mustang exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Ford Mustang’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15717 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15717 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:
  • Dyno-proven performance
  • Durable corrosion-resistant stainless steel construction
  • CNC precision robotic manufacturing techniques
See More

Borla Performance Exhaust – Cat-Back Exhaust System – EC-Type (Part No.1014019)

Cat-Back Exhaust System - EC-Type

from

$1112.99
Borla Performance Industries is the pioneer and leader in the design and manufacture of stainless steel performance exhaust. We began two decades ago as a manufacturer of exhaust systems for such “concours classics” as Rolls-Royce and Ferrari cars and have evolved into the premier manufacturer of today’s performance vehicles for the street, off-road, and racing.Borla is proud to offer a true “Made in the USA” product sold around the world. We are a company of motorheads, and it shows in our products, customer service, and culture. On weekends, the same Borla employees who built your exhaust or helped you with technical support can be found competing at tracks, drag strips, off-road events and car shows. Constructed using T-304 stainless steel for long life and sharp appearance, and features all welded construction for maximum durability. Unlike any other exhaust brand, Borla’systems are designed from scratch on a vehicle-by-vehicle basis. Every car or truck has unique mechanical and acoustical properties, all taken into account as we spend countless hours optimizing muffler body shapes, internal core configurations, flow dynamics,soundand more.

Product Features:
  • Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive powerful sound
  • Each system is built from premium, high-quality austenitic T-304 stainless steel
  • Ultra-smooth mandrel bends ensure maximum flow & power, and precision computer-controlled CNC manufacturing ensures an accurate fit
See More

Borla Performance Exhaust – Axle-Back Exhaust System – ATAK (Part No.11831)

Axle-Back Exhaust System - ATAK

from

$1808.99
Borla Performance Industries is the pioneer and leader in the design and manufacture of stainless steel performance exhaust. We began two decades ago as a manufacturer of exhaust systems for such “concours classics” as Rolls-Royce and Ferrari cars and have evolved into the premier manufacturer of today’s performance vehicles for the street, off-road, and racing.Borla is proud to offer a true “Made in the USA” product sold around the world. We are a company of motorheads, and it shows in our products, customer service, and culture. On weekends, the same Borla employees who built your exhaust or helped you with technical support can be found competing at tracks, drag strips, off-road events and car shows. Constructed using T-304 stainless steel for long life and sharp appearance, and features all welded construction for maximum durability. Unlike any other exhaust brand, Borla’systems are designed from scratch on a vehicle-by-vehicle basis. Every car or truck has unique mechanical and acoustical properties, all taken into account as we spend countless hours optimizing muffler body shapes, internal core configurations, flow dynamics,soundand more.

Product Features:
  • Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive powerful sound
  • Each system is built from premium, high-quality austenitic T-304 stainless steel
  • Ultra-smooth mandrel bends ensure maximum flow & power, and precision computer-controlled CNC manufacturing ensures an accurate fit
See More

aFe POWER – MACH Force-Xp Cat Back Exhaust System: Polished Tip, 409 Stainless Steel, Unleashes All Avail. HP (Part No.49-43047)

MACH Force-Xp Cat Back Exhaust System: Polished Tip, 409 Stainless Steel, Unleashes All Avail. HP

from

$1277.99
Introducing the new aFe Power MACH Force XP dual exhaust system for the 05-09 Ford Mustang V6-4.0L. In recent testing, this system produced 12 horsepower and 16 lbs. x ft. of torque. This exhaust is constructed from 2.5in. mandrel bent, stainless steel and is MIG-welded. Dual high flow, stainless steel, single in, single out mufflers are used to maximize performance across the power band while maintaining a great tone. To finish off this exhaust aFe uses dual, laser etched, 3.5in. polished 304 stainless steel tips. Note: The V8 rear bumper cover is recommended (Ford OE Part Number 5R3Z17K835BAA). The use of the OE V6 bumper cover requires cutting and should be performed by a skilled technician.

Product Features:
  • 2.5 in. Mandrel Bent 409 Stainless Steel Tubing
  • 100% Hand MIG Welded
  • Dual 3.5 in. 304 Stainless Steel Rolled Edge Round Tips
  • Hassle Free Installation
See More

MagnaFlow – Street Series Crossmember-Back Performance Exhaust System (Part No.15816)

Street Series Crossmember-Back Performance Exhaust System

from

$926.99
The MagnaFlow 1967-1970 Ford Mustang Street Series Crossmember-Back Performance Exhaust System 15816 brings enhanced engine sound and dyno-proven performance to your 3.3L, 4.1L, 4.7L, 5.0L, 5.8L, 6.4L, 7.0L 1967-1970 Ford Mustang with a healthy helping of our deep, resonant signature exhaust note at Moderate exterior and Mild interior sound levels. Thanks to its durable, corrosion resistant stainless steel design, this Ford Mustang exhaust system will handle whatever tarmac you decide to leave your mark on. This performance exhaust kit features a crossmember-back layout designed to replace your Ford Mustang’s exhaust system from the crossmember on back. With its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 2.75in. Polished Welded-On Single Wall Turndown Cut Edge tips, your muscle car will be sounding as awesome as it looks. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15816 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s limited lifetime construction warranty.

Product Features:
  • Dyno-proven performance
  • Durable corrosion-resistant stainless steel construction
  • CNC precision robotic manufacturing techniques
See More

MagnaFlow – Race Series Axle-Back Performance Exhaust System (Part No.15596)

Race Series Axle-Back Performance Exhaust System

from

$613.99
The MagnaFlow 2011-2012 Ford Mustang Race Series Axle-Back Performance Exhaust System 15596 doesn’t leave any performance on the table with a race-ready, light weight, dyno-proven design ready to help your 3.7L 2011-2012 Ford Mustang take on any pretenders, whether on the track or the street. Exhaust kit 15596 is engineered to produce our powerful, resonant signature exhaust note at Very Aggressive exterior and Aggressive interior sound levels with an axle-back layout that replaces your vehicle’s exhaust components from near the rear axle on back. Please check to ensure compliance with local noise regulations. This Ford Mustang exhaust kit features fast-flowing mandrel bent 2.5in. diameter main piping that ends in a Dual Split Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips. Extensive 3D scanning during development and the use of advanced CNC precision robotic manufacturing techniques ensures that 15596’s direct-fit design fits so perfectly that you can easily install the system yourself. The durable, corrosion resistant stainless steel construction of exhaust system 15596 is backed by MagnaFlow’s limited lifetime warranty.

Product Features:
  • High performance lightweight design
  • Straight pipe-like sound
  • Durable corrosion-resistant stainless steel construction
See More

MagnaFlow – Competition Series Cat-Back Performance Exhaust System (Part No.19101)

Competition Series Cat-Back Performance Exhaust System

from

$1579.99
The MagnaFlow 2015-2017 Ford Mustang Competition Series Cat-Back Performance Exhaust System 19101 brings an aggressive, attention-grabbing edge to the deep resonant exhaust note we’re so well known for. This exhaust kit is designed to enhance your 5.0L 2015-2017 Ford Mustang with dyno-proven performance made possible thanks to fast-flowing mandrel bent 3in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 4.5in. Polished Welded-On Double Wall Angle Cut Folded Edge tips featuring a sporty finish. The exhaust system’s cat-back layout replaces your ride’s exhaust system from near the catalytic converter on back. Exhaust system 19101 is engineered to make your vehicle’s engine produce Aggressive exterior and Moderate interior sound levels, befitting its competition-oriented design. 19101’s direct-fit design makes installation a breeze thanks to the use of advanced 3D scanning techniques. This performance exhaust system is made of 100% durable and corrosion-resistant stainless steel and produced using CNC precision robotic manufacturing, all backed by MagnaFlow’s limited lifetime warranty. Please check to ensure compliance with local noise regulations.

Product Features:
  • Crafted from 409 stainless steel with all mandrel-bent tubing
  • Increased horsepower and torque
  • Aggressive exterior sound
See More

MagnaFlow – Street Series Crossmember-Back Performance Exhaust System (Part No.15817)

Street Series Crossmember-Back Performance Exhaust System

from

$1083.99
The MagnaFlow 1964-1966 Ford Mustang Street Series Crossmember-Back Performance Exhaust System brings enhanced engine sound and dyno-proven performance to your 2.8L, 3.3L, 4.3L, 4.7L 1964-1966 Ford Mustang with a healthy helping of our deep, resonant signature exhaust note at Aggressive exterior and Moderate interior sound levels. Thanks to its durable, corrosion resistant stainless steel design, this Ford Mustang exhaust system will handle whatever tarmac you decide to leave your mark on. This performance exhaust kit features a crossmember-back layout designed to replace your Ford Mustang’s exhaust system from the crossmember on back. With its fast-flowing, mandrel bent 3in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit that you can enhance with tips of your choosing, your muscle car will be sounding as awesome as it looks. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15817 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s limited lifetime construction warranty.

Product Features:
  • Dyno-proven performance
  • Durable corrosion-resistant stainless steel construction
  • CNC precision robotic manufacturing techniques
See More

MagnaFlow – xMOD Series Cat-Back Performance Exhaust System (Part No.19535)

xMOD Series Cat-Back Performance Exhaust System

from

$3525.99
Configure your 2018-2023 Mustang GT Coupe for the sound you want, when you want it! MagnaFlow’s premium performance exhaust offering, the xMOD Series, provides an unrivaled exhaust experience! The revolutionary MagnaFlow 2018-2023 Ford Mustang XMOD Series Cat-Back Performance Exhaust System 19535 offers a completely modular exhaust system with all the benefits a MagnaFlow premium exhaust is known for: lifetime warrantied stainless-steel construction, dyno-proven performance featuring straight-through mufflers and fast-flowing mandrel bent pipes. xMOD Muffler Modules for the Mustang offer MagnaFlow’s proven straight-through Tru-X core design with a 4″ x 9¿ oval by 14″ long muffler, and now feature race bred v-band clamps for quick installation and removal. Easily switch from the deep, aggressive signature MagnaFlow exhaust note to the wild straight-pipe race car sound offered by the xMOD xTreme Delete Tru-X. xMOD xTreme Delete Tru-X for the Mustang comes equipped with the same race bred v-bands which allow removal of the Tru-X core muffler modules for that unmatched xMOD xTreme sound experience. PLEASE NOTE: While xMOD systems are 100% emissions legal, the use of xTreme Deletes combined with xTreme Bypass is recommended for track use only. Check local noise regulations for street legality. In addition to the xMOD variable sound and flow modules, this system incorporates MagnaFlow¿s latest exhaust tuning advancement called No Drone Technology (NDT). MagnaFlow¿s NDT, along with careful muffler design and placement, utilizes 1/4 wave passive noise cancellation to remove unwanted drone that can occur when creating a maximum performance, high flow exhaust system. xMOD systems retain the original equipment exhaust valve functionality. The NDT resonators are also attached with v-bands to offer the ability to remove or tune them if you have made substantial modifications to your powertrain.

Product Features:
  • Configurable sound from mild to wild
  • No-Drone-Technology (NDT) allows for a quiet cabin
  • xTreme Delete Modules for a straight-pipe setup
See More

Flowmaster Inc. – Axle-back System 409S – Dual Rear Exit – Force II – Moderate Sound (Part No.817497)

Axle-back System 409S - Dual Rear Exit - Force II - Moderate Sound

from

$713.99
Wake up the performance and sound hidden in your V6-powered 2011 to 2013 Mustang with a Flowmaster Force II exhaust system. These moderate sounding systems retain the dual exhaust system outlets and are designed to replace the original rear mounted mufflers using factory hangers and connections. With easy fit in mind, these systems are mandrel bent for maximum performance and include specially tuned mufflers. As a Force II system, it delivers a moderate exterior tone and a mild interior tone and is suited to the enthusiast who wants a subtle but distinctive exhaust note. Like all Flowmaster systems, the benefits include improved throttle response, power and mileage. The kit is a true bolt-on and includes everything you need to easily install at home with basic hand tools.
See More

Borla Performance Exhaust – T-304 Ss, 2.5"Pipe Dia, Dual Exhaust With Dual Exit, 4"Dia X 12" L Round (Part No.140067)

T-304 Ss, 2.5"Pipe Dia, Dual Exhaust With Dual Exit, 4"Dia X 12" L Round

from

$1072.99
BORLA(R) experience and advance engineering have produced a S- Type exhaust with outstanding flow numbers that generate great power enhancements. These attributes, coupled with an aggressive sound of power and awesome big tip, proclaim this Stang is all business.

Product Features:
  • BORLA(R) Cat-Back(TM) Exhausts Feature, Straight Through And Multi-Core Technology To Unleash Hidden Horsepower
  • Each System Is Built From Aircraft Grade High Quality T-304 Stainless Steel
  • Ultra Smooth Mandrel Bends Ensure Maximum Flow And Power
  • Precision Computer Controlled CNC Manufacturing Ensures An Accurate Fit
  • Free-Flow Exhaust Utilizes Patented Award And Race Winning Technology To Deliver Quality, Sound, Performance Gains And Enhanced Fuel Economy
  • Easy Bolt-On Installation
  • Aggressive S-Type Sound Under Acceleration, No Drone At Highway Speeds
See More

MagnaFlow – Street Series Axle-Back Performance Exhaust System (Part No.15593)

Street Series Axle-Back Performance Exhaust System

from

$922.99
The MagnaFlow 2011-2012 Ford Mustang Street Series Axle-Back Performance Exhaust System 15593 brings enhanced engine sound and dyno-proven performance to your 5.0L, 5.4L 2011-2012 Ford Mustang with a healthy helping of our deep, resonant signature exhaust note at Moderate exterior and Mild interior sound levels. Thanks to its durable, corrosion resistant stainless steel design, this Ford Mustang exhaust system will handle whatever tarmac you decide to leave your mark on. This performance exhaust kit features an axle-back layout designed to replace your Ford Mustang’s exhaust system from near the rear axle on back. With its fast-flowing, mandrel bent 3in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Folded Edge tips, your ride will be sounding as awesome as it looks. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15593 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:
  • Dyno-proven performance
  • Durable corrosion-resistant stainless steel construction
  • CNC precision robotic manufacturing techniques
See More

MagnaFlow – Competition Series Cat-Back Performance Exhaust System (Part No.19368)

Competition Series Cat-Back Performance Exhaust System

from

$2112.99
The MagnaFlow 2018-2023 Ford Mustang Competition Series Cat-Back Performance Exhaust System 19368 brings an aggressive, attention-grabbing edge to the deep resonant exhaust note we’re so well known for. This exhaust kit is designed to enhance your 5.0L 2018-2023 Ford Mustang with dyno-proven performance made possible thanks to fast-flowing mandrel bent 3in. main piping and 2 Straight-Through mufflers ending in a Quad Split Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Folded Edge tips featuring a sporty finish. The exhaust system’s cat-back layout replaces your ride’s exhaust system from near the catalytic converter on back. Exhaust system 19368 is engineered to make your vehicle’s engine produce Aggressive exterior and Moderate interior sound levels, befitting its competition-oriented design. 19368’s direct-fit design makes installation a breeze thanks to the use of advanced 3D scanning techniques. This performance exhaust system is made of 100% durable and corrosion-resistant stainless steel and produced using CNC precision robotic manufacturing, all backed by MagnaFlow’s limited lifetime warranty. Please check to ensure compliance with local noise regulations.

Product Features:
  • Crafted from 409 stainless steel with all mandrel-bent tubing
  • Increased horsepower and torque
  • Aggressive exterior sound
See More

MagnaFlow – Race Series Axle-Back Performance Exhaust System (Part No.15177)

Race Series Axle-Back Performance Exhaust System

from

$948.99
The MagnaFlow 2013-2014 Ford Mustang Race Series Axle-Back Performance Exhaust System 15177 doesn’t leave any performance on the table with a race-ready, light weight, dyno-proven design ready to help your 5.8L 2013-2014 Ford Mustang take on any pretenders, whether on the track or the street. Exhaust kit 15177 is engineered to produce our powerful, resonant signature exhaust note at Very Aggressive exterior and Aggressive interior sound levels with an axle-back layout that replaces your vehicle’s exhaust components from near the rear axle on back. Please check to ensure compliance with local noise regulations. This Ford Mustang exhaust kit features fast-flowing mandrel bent 3in. diameter main piping that ends in a Quad Split Rear exit with 4in. Black Coated Welded-On Double Wall Angle Cut Folded Edge tips. Extensive 3D scanning during development and the use of advanced CNC precision robotic manufacturing techniques ensures that 15177’s direct-fit design fits so perfectly that you can easily install the system yourself. The durable, corrosion resistant stainless-steel construction of exhaust system 15177 is backed by MagnaFlow’s 1-year finish warranty and limited lifetime warranty.

Product Features:
  • High performance lightweight design
  • Straight pipe-like sound
  • Durable corrosion-resistant stainless steel construction
See More

MagnaFlow – Street Series Cat-Back Performance Exhaust System (Part No.15881)

Street Series Cat-Back Performance Exhaust System

from

$934.99
The MagnaFlow 2005-2009 Ford Mustang Street Series Cat-Back Performance Exhaust System brings out the personality of your 4.6L, 5.4L 2005-2009 Ford Mustang with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this Ford Mustang exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Ford Mustang’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15881 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15881 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:
  • Dyno-proven performance
  • Durable corrosion-resistant stainless steel construction
  • CNC precision robotic manufacturing techniques
See More

aFe POWER – MACH Force-Xp Cat Back Exhaust System: Polished Tip, 304 Stainless Steel, Unleashes All Avail. HP (Part No.49-33087-P)

MACH Force-Xp Cat Back Exhaust System: Polished Tip, 304 Stainless Steel, Unleashes All Avail. HP

from

$1997.99
aFe is proud to introduce an all new MACH Force-Xp cat-back exhaust system for the 2015-2017 Ford Mustang with the V6-3.7L or V8-5.0L engine. In testing, this system resulted in gains up to +12 horsepower and +10 lbs. x Ft. of torque verified by our in house dyno. This cat-back exhaust system utilizes full 3″ tubing with reduction tubes to fit the OE connections. Remove them and combine with the aFe power Twisted Steel Long tube headers and connect ion pipes (48-33012-YC) for added flow and performance. This system incorporates dual, high-flow mufflers to improve performance across the power band while maintaining an aggressive sound. aFe also added an X-pipe with resonators to balance and evenly distribute exhaust pulses traveling through the exhaust system, creating more efficient flow and better performance while minimizing exhaust drone resulting in an awesome sound. To finish off the exhaust, dual 4″ high-luster polished 304 stainless steel tips are included. This is a direct bolt-on system no modifications necessary and includes necessary hardware for a hassle-free installation. Aggressive Sound: Dual free-flowing mufflers are used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. X-Pipe with Resonators Balance Tube: The equalizer balance tube evenly distributes exhaust pulses traveling through the exhaust system. This creates a more efficient flow for better performance while minimizing exhaust drone. Simple Installation: This is a direct bolt-on system which retains your factory exhaust tips and includes necessary hardware for a hassle-free installation. No modifications necessary. Leak-Free Seal: High quality band clamps are used for a complete 360 degree sealing surface. Dual 304 SS Tips: Finishing off this unique exhaust system are dual, aFe laser etched, 4″ polished 304 stainless steel tips for an aggressive style.

Product Features:
  • Mandrel Bent Stainless Steel Tubing
  • Dual High Flow Mufflers
  • Incorporates X-Pipe w/Resonators TO Balance Exhaust Pulses
  • Polished 304 Stainless Steel Tips
See More

Borla Performance Exhaust – Axle-Back Exhaust System – S-Type (Part No.11889)

Axle-Back Exhaust System - S-Type

from

$921.99
Borla Performance Industries is the pioneer and leader in the design and manufacture of stainless steel performance exhaust. We began two decades ago as a manufacturer of exhaust systems for such “concours classics” as Rolls-Royce and Ferrari cars and have evolved into the premier manufacturer of today’s performance vehicles for the street, off-road, and racing.Borla is proud to offer a true “Made in the USA” product sold around the world. We are a company of motorheads, and it shows in our products, customer service, and culture. On weekends, the same Borla employees who built your exhaust or helped you with technical support can be found competing at tracks, drag strips, off-road events and car shows. Constructed using T-304 stainless steel for long life and sharp appearance, and features all welded construction for maximum durability. Unlike any other exhaust brand, Borla’systems are designed from scratch on a vehicle-by-vehicle basis. Every car or truck has unique mechanical and acoustical properties, all taken into account as we spend countless hours optimizing muffler body shapes, internal core configurations, flow dynamics,soundand more.

Product Features:
  • Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive powerful sound
  • Each system is built from premium, high-quality austenitic T-304 stainless steel
  • Ultra-smooth mandrel bends ensure maximum flow & power, and precision computer-controlled CNC manufacturing ensures an accurate fit
See More

Flowmaster Inc. – Cat-back System 409S – Dual Dump Exit – American Thunder – Aggressive Sound (Part No.817574)

Cat-back System 409S - Dual Dump Exit - American Thunder - Aggressive Sound

from

$499.99
Flowmaster’s race-oriented American Thunder Cat-back system is designed to mount behind the factory catalytic converters, or most OEM style aftermarket H-pipes. These systems are mandrel bent for maximum performance and include Super 44 series mufflers. This American Thunder system delivers a super aggressive interior and exterior tone and is suited to the enthusiast who wants the most aggressive components they can purchase. Like all Flowmaster systems, the benefits include improved throttle response and power. Designed for an easy fit, these systems include all necessary parts and hardware for easy installation.

Product Features:
  • Fits with most modified suspensions
  • Stainless steel construction
  • Patented Delta Flow technology
  • Lifetime limited warranty
  • Made in the USA
See More

MagnaFlow – Competition Series Cat-Back Performance Exhaust System (Part No.19191)

Competition Series Cat-Back Performance Exhaust System

from

$1449.99
The MagnaFlow 2015-2023 Ford Mustang Competition Series Cat-Back Performance Exhaust System 19191 brings an aggressive, attention-grabbing edge to the deep resonant exhaust note we’re so well known for. This exhaust kit is designed to enhance your 2.3L 2015-2023 Ford Mustang with dyno-proven performance made possible thanks to fast-flowing mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 4.5in. Polished Welded-On Double Wall Angle Cut Folded Edge tips featuring a sporty finish. The exhaust system’s cat-back layout replaces your ride’s exhaust system from near the catalytic converter on back. Exhaust system 19191 is engineered to make your vehicle’s engine produce Aggressive exterior and Moderate interior sound levels, befitting its competition-oriented design. 19191’s direct-fit design makes installation a breeze thanks to the use of advanced 3D scanning techniques. This performance exhaust system is made of 100% durable and corrosion-resistant stainless steel and produced using CNC precision robotic manufacturing, all backed by MagnaFlow’s limited lifetime warranty. Please check to ensure compliance with local noise regulations.

Product Features:
  • Crafted from 409 stainless steel with all mandrel-bent tubing
  • Increased horsepower and torque
  • Aggressive exterior sound
See More

1965 Ford Mustang Exhaust System Kits

Maybe you’re in the middle of a full rebuild of that 1965 Ford Mustang. Maybe you just need a couple of Exhaust System Kits. Either way, Advance Auto Parts has 3 different Exhaust System Kits in our inventory ranging from $721.99 to $1,083.99. That means you can find the exact parts or products you need to keep that 1965 Ford Mustang running smoothly.

Exhaust System Kits are only as good as their brand. We stock 2 different brands to make sure you have plenty of trusted parts to choose from for your 1965 Ford Mustang. JBA Performance and MAGNAFLOW are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Exhaust System Kits for your 1965 Ford Mustang, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Exhaust System Kits to keep your 1965 Ford Mustang rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Exhaust System Kits Brands To Make Your 1965 Ford Mustang Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1965 Ford Mustang demands trusted brand parts and products to keep it running. Many trusted brands of Exhaust System Kits make up Advance Auto Parts’ inventory, and all are ready to help make your Mustang the best it can be. Be sure to browse some of our top Exhaust System Kits brands and parts.

FAQs for 1965 Ford Mustang Exhaust System Kits

What are the most purchased Exhaust System Kits for the 1965 Ford Mustang?

Out of 3 Exhaust System Kits for the 1965 Ford Mustang, the most popular in our inventory are:
Street Series Crossmember-Back Performance Exhaust System
from $1083.99
This product is not rated
Street Series Crossmember-Back Performance Exhaust System
Exhaust System Kits
Street Series Crossmember-Back Performance Exhaust System
from $923.99
This product is not rated
Street Series Crossmember-Back Performance Exhaust System
Exhaust System Kits
40-2654 2.5" Stainless Steel Exhaust System 67-70 Mustang Exhaust with Tips
from $721.99
This product is not rated
40-2654 2.5" Stainless Steel Exhaust System 67-70 Mustang Exhaust with Tips
Exhaust System Kits