1965 Dodge Dart Performance and Racing Products

Below you will find various in-demand Dodge Performance and Racing Products, components and accessories for your 1965 Dart. Advance Auto Parts has popular Dart parts like Performance Exhaust Products, Performance Oil Filters, Performance Ignition Products and more. You’ll also find aftermarket and OEM Performance and Racing Products for other Dart model years including 1972, 1973, 1974, 1975, 1976, 2013, 2014, 2015, 2016 and more. Select a category of 1965 Dodge Dart Performance and Racing Products below and start saving instantly.

Popular 1965 Dodge Dart Performance and Racing Products Categories

Performance Carburetors

Performance Engine Coolant Thermostats

Performance Fuel Pumps

Performance Coils

Performance Exhaust Mufflers

Performance Exhaust Headers

Performance Shifters

Performance Distributors

Performance Valve Covers

Performance Engine and Transmission Mounts

Performance Engine Cylinder Head Gaskets

Performance Engine Camshaft and Lifter Kits

Performance Front Shock and Struts

Performance Distributor Components

Performance Engine Valve Springs

Performance Engine Valve Cover Gasket Sets

Performance Chassis Bushing Kits

Performance Flywheel and Flexplates

Performance Exhaust Manifold Gaskets

Performance Leaf Spring Bushings

Performance Ignition Kits

Performance Engine Rocker Arms

Performance Engine Camshafts

Performance Engine Oil Pan Gaskets

Performance Ignition Parts

Performance Intake Manifold Hardware

Performance Lower Control Arm Bushings

Performance Engine Valve Lifters

Performance Tie Rod End Boots

Performance Transmission Shift Kits

Performance Oil Filler Caps

Performance Ball Joint Boots

Performance Engine Push Rods

Performance Engine Valve Spring Retainer

Performance Torque Converters

Performance Engine Valve Stem Seal Sets

Performance Flywheels

Performance Torsion Bar Dust Boots

Essential Performance and Racing Products for 1965 Dodge Darts

from

$33.99

COMP Cams offers a complete line of valve stem seals, from the umbrella seals to the positive-stop Teflon seal. These seals are a must to keep unwanted oil from entering the combustion chamber through the clearance in the valve guides. The umbrella seal is normally used when a larger-than-stock diameter spring is used, in the case of a double spring, the positive-stop Teflon seal is used. The umbrella seals require no machining, but with the Teflon seal it is necessary to disassemble the heads and machine the top of the guide with a special .530 diameter cutter. Whenever you are planning an engine overhaul or a cam change, don’t forget the valve seals.

Product Features:

Work with .530″ guides and 3/8″ valve stem diameter
Valve stem oil seals keep unwanted oil from entering the combustion chamber
Several different types of valve seals are offered

from

$239.99

dBX series mufflers – this Laminar Flow internal configuration muffler features the revolutionary HP core design delivering excellent sound control for a wide variety of engine types where vehicle under-chassis space is limited. Utilizing cool shell technology to minimize radiant heat from the muffler body, they are perfect for sport compact imports as well as muscle cars and other performance applications. Constructed with 409S stainless steel internal components and wrapped with a proprietary insulation material and finally a polishable 304 stainless steel casing, these mufflers are as attractive as they are functional delivering a moderate to aggressive tone.

from

$327.99

Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts,

Product Features:

Excellent performance in street carbureted applications.
More vacuum allows an increase in duration for improved performance and assists power brakes.
Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

from

$64.99

Available in various sizes, heights, and finishes, Spectre offers a wide variety of high performance valve covers designed to easily replace your stock covers. Designed for 1965-1991 Chrysler 273-318-340-360 engines, this valve cover features chrome-plated steel construction and a smooth design. Sold in pairs, this stock profile cover is baffled to provide optimum function. With show quality construction and a sealing edge designed for an ideal fit, our valve covers are engineered to look great for applications ranging from custom builds to replacing stock equipment.

Product Features:

Designed for 1965-1991 Chrysler 273-318-340-360 engines
Baffled for breather system compatibility
Sold in pairs
Triple chrome-plated steel construction
Stock height
Features OEM style sealing edge

from

$23.99

A true performance application component for cars, trucks, hot rod, for racing and competition, yet popularly used for street vehicles when more horsepower is added. Soft running enough to absorb vibrations for street use yet rugged for racing use. Helps control torque on high performance vehicles. Maintains proper drive shaft angle to help prevent early wear and unexpected power train damage. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal transmission mounts. Resistant to under vehicle fluid oils, coolants and road contaminants. Made of Energy’s Hyper-Flex performance polyurethane and heavy duty hardware – for added durability.

Product Features:

Made from HYPER-Flex Polyurethane
Firm Enough for Huge Amounts of Horsepower/Torque
Soft Enough Not to Transmit Vibration

from

$970.99

Ideal for use with mainly stock components like rocker arms, intake manifolds, cylinder heads, compression ratio, torque converters and rear gear ratios, the High Energy camshaft grind family is a great choice for street performance applications.

Product Features:

Good blend of efficiency and performance.
Perfect choice for performance street rebuilds.
Work well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.

from

$1299.99

Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.

Product Features:

Long Tube Lengths
Long Transition Collectors
Monstrous Low-Mid Range Torque
Keep Top End Horsepower
Provides Finest Fit
Most Durable Design Available

from

$44.99

Ultra-Seal is Mr. Gasket premium valve cover gasket material. It’s manufactured from a high density cork and rubber blend with a black latex coat applied to the outside to help seal minor flange irregularites and eliminate oil leakage. It creates a positive seal by controlled swelling of the gasket material when exposed to hot oil. For original equipment replacement, high performance street, drag race and oval track use. Sold as a pair, these gaskets are .187 inch thick.

Product Features:

Manufactured from high-density cork /rubber blend gasket material
A black latex rubber coating is applied to outside of gasket to help seal minor flange irregularities and eliminate the possibility of oil leakage
Creates a positive seal by controlled swelling of the gasket material when exposed to hot engine oil
For OE replacement, high performance street, drag race and oval track
.187″ thick
Handles Ex Flange Pressure
Forms Leak Proof Seal
Black Latex Coating

from

$9.99

Product Features:

Easy to Install
Superior Material
Saves Your Torsion Bar
Lasts Longer
Looks Great

from

$527.99

The B&M Megashifter has it all, form, function and classic style. This all adds up to bring you a quality shifter that’s been one of the most popular automatic shifters of all time. The light truck Megashifter is better suited for truck and bench seat applications with its overall height of 14.85-inches tall (2.25-inches taller than #80690 Megashifter.) The positive ratcheting action won’t allow you to over-shift and miss a gear at that critical moment, along with the reverse lockout feature meets NHRA/IHRA safety rules for those weekend grudge races at the track, while the look and feel of the T-handle and accordion style shift boot really shows off its racing heritage. Other features include a black console that you can trim to match the contour of your vehicle’s floor, 5-foot long shifter cable, cable brackets, transmission shift levers, chrome plated top plate with lighted gear indicator and everything needed for an easy at home installation. An optional T-handle with a 12-volt button is available separately for actuating a trans-brake, nitrous oxide or other accessories for the hard-core performance enthusiast. This shifter fits most popular Chrysler, Ford and GM 3 and 4-speed automatic transmissions. Note: AOD transmissions require optional kit #40496, GM 4L60E through 4L85E transmissions with PRNDL switch will require optional kit #70499. Overall Dimensions – 14.9L x 6.4W x 14.8H

Product Features:

Universal Floor Mount Application
Cable Operated
Quick Installation
Accurate Shifting
NHRA/IHRA Reverse Lockout Meets Requirements
Use w/Reverse Pattern Valve Body
Includes Neutral Safety Switch
Includes Backup Light Switch

from

$177.99

As performance levels increase, an O.E. style flexplate just won’t cut it and a stronger option is a necessity to prevent transmission and/or converter failure. B&M has you covered with our high performance flexplate designed for 1971-92 Chrysler, Dodge and Plymouth (externally balanced) 360ci V8 engine (6-bolt crankshaft flange) and A727 transmission. Features include high tensile strength steel construction to resist elongation and cracking, 10.00 and 11.125 inch bolt patterns and comes with SFI 29.1 safety certification insuring the ultimate in safety and performance. The assembly is then Zinc plated and treated with a Chromate Conversion Coating for added corrosion resistance and durability. B&M SFI approved flexplates are ideal for extreme duty race applications as well as street cars, tow vehicles or other vehicles needing the added protection and toughness that B&M has been delivering since 1953.

Product Features:

NHRA/IHRA Legal For All Classes
Includes SFI Certification Sticker
Ideal For Street Applications
To Extreme Duty Racing
To High RPM Use

from

$9.99

Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

Product Features:

Easy to Install
Superior Material
Saves Your Tie Rods
Lasts Longer
Looks Great

from

$92.99

Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

Product Features:

Service Part
No Moving Parts To Wear Out
Self Contained Unit
Can Drive OEM
Can Drive High Performance Ignition Coils

from

$15.99

Competition design uses a stud, washer & nut to secure the clamp rather than a bolt. The clamp itself is also chromed.

Product Features:

Rolled Edges For Strength
Ideal For Magnetos
Ideal For Ignition Distributor

from

$149.99

Product Features:

Non-Rotator Type
1.550 in. Outer Diameter
.190 Wire Size
Single Coil Spring Type
Set of 16

from

$29.99

Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

Product Features:

Opens At 180 Degrees
Designed to Resist Large Variations of Coolant Pressure at High RPM
Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
For High Performance Street, Drag Race, and Oval Track
Copper & Brass Construction – Resists Corrosion
High Flow

from

$9.99

Easy to Install
Superior Material
Lasts Longer
Looks Great

from

$20.99

These grade 5 hex head bolts are brite zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 3/8 inch-16 x 1 inch bolts & washers

Product Features:

Zinc plated to resist corrosion and provide a clean professional appearance
Made from Grade 5 steel for strength and durability
Flat washers provide uniform clamp load and prevent galling on aluminum intake manifolds
Allen (socket) Head
Zinc Plated For Protection

from

$114.99

Engineered for faster rise time, longer spark duration and increased performance. Unique design with premium grade wire, special low resistance, high turns ratio windings. Produces higher spark energy with breakerless electronic ignition systems. For points application the supplied 0.85 ohm ballast resistor must be used in conjunction with the vehicle original ballast resistor, if so equipped. Oversized molded case with integral cooling fins and high capacity oil filled construction provide high thermal conductivity ensuring cool operation and long life. Extra tall tan Alkyd tower and integral voltage dam eliminate “flashover” to primary terminals. Comes complete with mounting hardware and 0.85 ohm ballast resistor. Effective up to 6,500 RPM.

Product Features:

Oil Filled For Better Cooling
Optimized Low Resistance
Silicon Magnetic Steel E-Core
Higher Energy/Voltage Outputs
Quicker Starts
Improved Idle Quality
Resists Shock And Vibration
Resists Corrosion

from

$76.99

Product Features:

Cylinder Head Gasket
1958-1979 361-383-400-413-426
Not For Hemi

from

$119.99

The best all-round choice for vehicles with leaf or coil springs. Properly loads rear wheels to prevent over-reaction and wheel hop.

Product Features:

Excellent Weight Transfer
Lets Front End Down Quickly
Maximum Traction
Makes Vehicle Safer
Easier Control At End Of Track
Better Overall Stability

from

$62.99

For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

Product Features:

Maintains Better Alignment While Driving
Full Floating and Non Binding
Fits Into the Remaining Stock Control Arms

from

$549.99

The Holeshot Converter is a very good choice for the typical street machine that is looking for better launch capability and more strength. With a furnace brazed turbine, New turbine hub and dual pattern drive lugs on some Holeshots.

Product Features:

Furnace Brazed Impeller
Steel Alloy Pump Drive Tube
Heavy Duty Needle Bearing
Between Stator and Turbine
Furnace Brazed Turbine

from

$599.99

The industry standard with adjustable mechanical advance curve. Triggered by photo-optic infrared LED system. Improved combustion efficiency and economy, increased spark plug life and cold weather starting, and maintenance free operation.

Product Features:

Improved Combustion And Economy
Increased Spark Plug Life
Improved Cold Weather Starting
Maintenance Free Operation
Accurate Spark Timing
Self-Lubricating Bushings
Years Of Trouble-Free Service

from

$178.99

As performance levels increase, an O.E. style flexplate just won’t cut it and a stronger option is a necessity to prevent transmission and/or converter failure. B&M has you covered with our high performance flexplate designed for 1962-up A727, A904 transmissions and all internally balanced Chrysler, Dodge and Plymouth V8 engines with 8-bolt crankshaft flange. Features include high tensile strength steel construction to resist elongation and cracking, 10.00 inch bolt pattern and comes with SFI 29.1 safety certification insuring the ultimate in safety and performance. The assembly is then Zinc plated and treated with a Chromate Conversion Coating for added corrosion resistance and durability. B&M SFI approved flexplates are ideal for extreme duty race applications as well as street cars, tow vehicles or other vehicles needing the added protection and toughness that B&M has been delivering since 1953.

Product Features:

NHRA/IHRA Legal For All Classes
Includes SFI Certification Sticker
Ideal For Street Applications
To Extreme Duty Racing
To High RPM Use

Upgrade your 1965 Dodge Dart with Top-Quality Performance and Racing Products

When it comes to maintaining or upgrading your 1965 Dodge Dart, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Dodge or enhancing its overall performance, Performance and Racing Products are key to keeping your Dart functioning at its best. At Advance Auto Parts, we offer a wide selection of 121 Performance and Racing Products for the 1965 Dodge Dart, designed to meet your needs without breaking the bank. From Performance Exhaust Product replacements to Performance Oil Filters upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1965 Dodge Dart at great prices. Our Performance and Racing Products inventory for this model ranges from just $8.99 to $1,575.99, with an average price of $261.89. Our 121 Performance and Racing Products in stock come from 16 trusted brands, so you’re sure to find the right part for your 1965 Dodge Dart without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1965 Dodge Dart, we stock popular OEM and aftermarket Performance and Racing Products from top names like Mallory, B & M, Accel, and more. Mallory Performance and Racing Products start at just $92.99 and boast an impressive 4.9 stars average rating from customers. B & M and Accel also bring quality to the table, with Performance and Racing Products available starting at $45.99, and at an average 4.1 stars rating. With 423 customer reviews and counting, our 1965 Dodge Dart Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1965 Dodge Dart is always ready to roll. We’re committed to providing you with everything you need to keep your Dart in top shape, all in one place. Start shopping confidently below for your 1965 Dodge Dart!

Best-Selling Performance Exhaust Products for 1965 Dodge Darts

Enhance the driving experience in your Dodge with 5 quality Performance Exhaust Product components, starting at $20.99.

show more show less

from

$169.99

The three chamber design utilizes Flowmaster’s patented Delta Flow technology along with an internal tuning chamber to reduce sound inside the vehicle. Provides the same performance and exterior tone characteristics as the two chamber, but with less interior resonance. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.

from

$20.99

Header Gasket Set

from

$33.99

Mr. Gasket Performance Exhaust Gaskets are manufactured from high-temperature composite material. They provides maximum torque retention to eliminate gasket failure. Precision die cut for an excellent fit, but can be trimmed if necessary for modified port applications. For OE replacement, high-performance street, drag race and oval track. Rectangular Ports, 1.30 inch x 1.80 inch

Product Features:

Manufactured from high-temperature acrylic blend exhaust material
Provides excellent sealing and durability
Can be trimmed if necessary for modified port applications
For OE replacement, high performance street, drag race and oval track use
Precision Die Cut For Excellent Fit

from

$29.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
Slotted bolt holes allow for easier header installation.
Not intended for use in emission controlled vehicles.

from

$1199.99

Long Tube Lengths
Long Transition Collectors
Monstrous Low-Mid Range Torque
Keep Top End Horsepower
Provides Finest Fit
Most Durable Design Available

Top Picks for 1965 Dodge Dart Performance Ignition Products

Upgrade Dodge Darts with top-quality Performance Ignition Products parts, including 7 OEM and aftermarket selections for your 1965 model.

show more show less

from

$92.99

Service Part
No Moving Parts To Wear Out
Self Contained Unit
Can Drive OEM
Can Drive High Performance Ignition Coils

from

$149.99

Put an end to high maintenance point ignition systems by installing a proven Mallory Unilite ignition conversion kit. Features at a glance, improves performance and fuel efficiency, easy to install with simple hand tools, reduced maintenance and is available for all popular 12-volt negative ground domestic cars and trucks.

Product Features:

Easy Installation
Improved Fuel Economy
Reduced Maintenance
Accurate Timing
Improved Performance
Provides A Simple Conversion
No Moving Parts To Wear Out

from

$45.99

Excellent high performance replacement for import and domestic vehicles with canister type oil filled coil. Re-engineered windings for even higher energy output resulting in quicker starting improved throttle response and more high RPM power. Designed to work with Points style and Breakerless electronic ignition systems. Heavy duty black Alkyd tower provides in flashover in protection to primary terminals. ACCEL Yellow can. 42000 volts effective up to 6500 RPM 1.4 ohms on the primary

Product Features:

42000 Volts
Effective To 6500 RPM
Quicker Starting
Improved Throttle Response
Higher RPM Power
Can Finished In Yellow

from

$51.99

Chrome Plated
42000 Volts
Effective To 6500 RPM
Improved Throttle Response
Higher RPM Power
Can Finished In Yellow

from

$114.99

Oil Filled For Better Cooling
Optimized Low Resistance
Silicon Magnetic Steel E-Core
Higher Energy/Voltage Outputs
Quicker Starts
Improved Idle Quality
Resists Shock And Vibration
Resists Corrosion

from

$33.99

Product Features:

Service Part
Makes Connections Quick And Easy

from

$199.99

Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).

Product Features:

Glass Filled Polyester Case
Longer Spark Duration
Increased Performance
No Energy Loss Due To Arcing
Includes Brass Contact Terminal

In-Demand Performance Fuel Systems for 1965 Dodge Darts

Select from 7 premium Performance Fuel Systems parts for your 1965 Dodge Dart, with prices ranging from $20.99 to $699.99.

show more show less

from

$518.99

The Edelbrock 1403 Performer Series 500 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characterist

Product Features:

Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
Electric Choke
4 Barrel Count
Square Bore
Smooth Secondary Transition
Both Timed and Full Vacuum Ports
Includes PCV Outlet

from

$499.99

Holley’s new 0-80457SA is constructed from aluminum which compared to its zinc counterpart equates to a weight savings of 40%! Holley’s aluminum 0-80457SA will hold its shine longer and also can be hand polished for a custom look! Its 600 CFM of airflow,

Product Features:

Vibratory Polished For Good Looks

from

$682.99

Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.

Product Features:

Vibratory Polished For Good Looks
Optimized Street Calibration That Works Out Of The Box
Factory Preset Electric Choke For Easy Startups
Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
No Unnecessary Trips Back To The Parts Store
Limited Lifetime Warranty
100% Wet Flow Tested By Holley Technicians
Arrives Ready To Run

from

$20.99

Fuel pump mounting pad cover is used to cover the hole in the block when the mechanical fuel pump is removed to use an electric pump.

Product Features:

Mechanical Fuel Pump Mounting Pad Cover For Chrysler V-8ft.S

from

$220.99

Edelbrock part #1720 Performer RPM Series fuel pump is for Small-Block Chrysler designed for use with all Edelbrock carburetors used in Performer or Performer RPM applications. These high-performance’s street Fuel Pumps feature a high quality three stage

from

$699.99

Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.

Product Features:

Vibratory Polished For Good Looks
Optimized Street Calibration That Works Out Of The Box
Factory Preset Electric Choke For Easy Startups
Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
No Unnecessary Trips Back To The Parts Store
Limited Lifetime Warranty
100% Wet Flow Tested By Holley Technicians
Arrives Ready To Run

from

$699.99

Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.

Product Features:

Vibratory Polished For Good Looks
Optimized Street Calibration That Works Out Of The Box
Factory Preset Electric Choke For Easy Startups
Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
No Unnecessary Trips Back To The Parts Store
Limited Lifetime Warranty
100% Wet-Flow Tested To Assure It Arrives Ready To Run
Street Ready; Out Of The Box

Most Sold 1965 Dodge Dart Performance Engines

Explore our best-selling Dodge parts for the 1965 Dart among 79 OEM and aftermarket options starting from $8.99.

show more show less

from

$41.99

Mr. Gasket Performance Valve Cover Gaskets are high-density cork/rubber blend gaskets that use evenly sized cork particles distributed evenly throughout the rubber binder. The result is a compressible valve cover gasket without leak paths. These gaskets create a positive seal by controlled swelling of the gasket material when exposed to hot engine oil. Provides excellent flange sealing and durability. For original equipment replacement, high performance street, drag race and oval track use.

Product Features:

Manufactured from high-density cork/rubber blend gasket material
Provides excellent sealing and durability
For OE replacement, high performance street, drag race and oval track use

from

$33.99

Work with .530″ guides and 3/8″ valve stem diameter
Valve stem oil seals keep unwanted oil from entering the combustion chamber
Several different types of valve seals are offered

from

$29.99

Opens At 180 Degrees
Designed to Resist Large Variations of Coolant Pressure at High RPM
Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
For High Performance Street, Drag Race, and Oval Track
Copper & Brass Construction – Resists Corrosion
High Flow

from

$29.49

Opens at 160 Degrees
Designed to Resist Large Variations of Coolant Pressure at High RPM
Fully opens at Correct Temperature Consistently Regardless of engine RPM
For High Performance Street, Drag Race, and Oval Track
Copper & Brass Construction – Resists Corrosion
High Flow

from

$344.99

Excellent performance in street carbureted applications.
More vacuum allows an increase in duration for improved performance and assists power brakes.
Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

from

$18.99

Fel-Pro® Performance Gaskets deliver reliable sealing under grueling racing conditions.

Product Features:

Blue Stripe® performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
Not intended for use in emission controlled vehicles.

from

$31.99

Opens At 195 Degrees
Designed to Resist Large Variations of Coolant Pressure at High RPM
Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
For High Performance Street, Drag Race, and Oval Track
Copper & Brass Construction – Resists Corrosion
High Flow

from

$44.99

Manufactured from high-density cork /rubber blend gasket material
A black latex rubber coating is applied to outside of gasket to help seal minor flange irregularities and eliminate the possibility of oil leakage
Creates a positive seal by controlled swelling of the gasket material when exposed to hot engine oil
For OE replacement, high performance street, drag race and oval track
.187″ thick
Handles Ex Flange Pressure
Forms Leak Proof Seal
Black Latex Coating

from

$20.99

Zinc plated to resist corrosion and provide a clean professional appearance
Made from Grade 5 steel for strength and durability
Flat washers provide uniform clamp load and prevent galling on aluminum intake manifolds
Allen (socket) Head
Zinc Plated For Protection

from

$44.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions.

Product Features:

Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
Raises combustion sealing force to roughly three times that of standard head gaskets.
Steel wire rings for the greatest combustion seal strength.
Not intended for use in emission controlled vehicles.

from

$37.49

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL-WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$297.99

An older member of the COMP Cams grind family, the Magnum series of camshafts offers excellent performance gains over stock without the added wear and tear associated with more aggressive camshafts.

Product Features:

Best with aftermarket torque converters and 9.5:1 compression.
Great high RPM power.
Easy on valve train parts.
Can be used with mild ratio rocker arms and traditional performance valve springs.

from

$257.99

Good blend of efficiency and performance.
Perfect choice for performance street rebuilds.
Work well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.

from

$1575.99

ENG ROCKER ARM KIT

from

$1398.99

Good blend of efficiency and performance.
Perfect choice for performance street rebuilds.
Work well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.

from

$1398.99

Good blend of efficiency and performance.
Perfect choice for performance street rebuilds.
Work well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.

Nostalgia Plus 233/240 Hydraulic Flat Cam K-Kit for Chrysler 273-360

from

$1042.00

Nostalgia Plus 233/240 Hydraulic Flat Cam K-Kit for Chrysler 273-360

from

$999.99

Furnace Brazed Impeller
Steel Alloy Pump Drive Tube
Heavy Duty Needle Bearing
Between Stator and Turbine
Furnace Brazed Turbine

from

$970.99

Good blend of efficiency and performance.
Perfect choice for performance street rebuilds.
Work well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.

High Energy 220/220 Solid Flat Cam K-Kit for Chrysler 170-225 6 Cylinder

from

$831.99

High Energy 220/220 Solid Flat Cam K-Kit for Chrysler 170-225 6 Cylinder

Magnum 260/260 Solid Flat Cam and Lifter Kit for Chrysler 273-360

from

$671.99

Magnum 260/260 Solid Flat Cam and Lifter Kit for Chrysler 273-360

10 Degree Steel Retainer Set of 100 for 26120 Beehive Spring

from

$635.99

10 Degree Steel Retainer Set of 100 for 26120 Beehive Spring

High Energy 220/220 Solid Flat Cam and Lifter Kit Chrysler 170-225 6 Cylinder

from

$635.99

High Energy 220/220 Solid Flat Cam and Lifter Kit Chrysler 170-225 6 Cylinder

Nostalgia Plus 239/246 Hydraulic Flat Cam and Lifter Kit for Chrysler 273-360

from

$618.99

Nostalgia Plus 239/246 Hydraulic Flat Cam and Lifter Kit for Chrysler 273-360

Top-Rated Performance and Racing Products Brands For Your 1965 Dodge Dart

Shop for the best-rated brands offering Performance and Racing Products and other products for your 1965 Dodge Darts. Below you’ll find some of our best rated Performance and Racing Products from Mallory, B & M, and Accel, and more. Performance and Racing Products from these brands that fit a 1965 Dart start at just $45.99 and are rated as high as 4.9 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.

Popular Mallory 1965 Dodge Dart Performance and Racing Products

When it comes to maintaining or upgrading your 1965 Dodge Dart, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. Mallory ticks all of those boxes. We offer a wide selection of Mallory Performance and Racing Products, specifically designed for the 1965 Dodge Dart. With over 2 Mallory brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $92.99, with an average price of just $121.49. Plus, with over 4 customer reviews and an average rating of 4.9 stars, you can trust that our Mallory Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $149.99

(1)

Mallory Kit: Unil Conv: Delco: V8

“I had my 66 LeMans 326 engine rebuilt. After the install, which was easy to do, and following the instructions the engine fired right up. Now I won’t ”

from $92.99

(3)

Unilite Ignition Module

“I like the Unilite product because it is so small and compact compared to the HEI stuff I normally use. If you are restricted on space Its a great pro”

Popular B & M 1965 Dodge Dart Performance and Racing Products

B & M auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1965 Dodge Dart owner should feel confident when installing genuine B & M parts in their vehicle. To ensure the best fit and performance for your 1965 Dart, Advance Auto Parts carries a full inventory of 2 B & M Performance and Racing Products. Plus you will be keeping your Dodge in peak condition while saving money because prices on these B & M Performance and Racing Products range from $299.99 to $340.99, plus, with more than 12 customer reviews and an impressive 4.1 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.

from $340.99

(1)

Automatic Shifter, StarShifter

“while I was looking this shifter over and found it wouldn’t work for my application, I found it to be as beautiful as the B&M shifter I had in my othe”

from $299.99

(11)

Automatic Shifter, Z-Gate

“Great shifter”

FAQs for 1965 Dodge Dart Performance and Racing Products

Which Performance and Racing Products are best-sellers for 1965 Dodge Darts?

Out of 121 Performance and Racing Products that fit 1965 Dodge Darts, the following parts are the top sellers:

High Performance 180 Degree Thermostat for Increased Flow (17360033) – $29.99
High Performance Thermostat – 160 Degree Brass & Copper (17360031) – $29.49
Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny (6340008) – $499.99

What’s the price range for 1965 Dodge Dart Performance and Racing Products?

Performance and Racing Product prices for the 1965 Dodge Dart start at $8.99 and go up to $1,575.99 for the most premium parts.

What’s the average price of a Performance and Racing Product for a 1965 Dodge Dart?

The average price for Performance and Racing Products for the 1965 Dodge Dart is $261.89. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Performance and Racing Products for other Dodge Dart model years?

Yes, we currently carry Performance and Racing Products for 19 model years of Dodge Darts between 1960 and 2016. Performance and Racing Products are bought most frequently for the following model years: 2016, 2015, 2014, 2013, 1976, 1975, 1974, 1973, and 1972.

What are the cheapest Performance and Racing Products for my 1965 Dodge Dart?

The cheapest 1965 Dodge Dart Performance and Racing Products we carry in stock are:

Hardened Lash Cap with 3/8" Valve Stem, .190" Head Height (50289460) – $8.99
High Energy 7.500" Long, 5/16" Diameter Pushrod (50289286) – $8.99
Tie Rod Dust Boot (17360821) – $9.99
Torsion Bar Dust Boot Set (22908458) – $9.99
Tie Rod Dust Boot (22906874) – $9.99

What are the top-rated Performance and Racing Products that fit the 1965 Dodge Dart?

Out of 423 reviews by customers, our 1965 Dodge Dart Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1965 Dodge Dart and their top-rated products:

Performance Ignition Products
- Mallory Kit: Unil Conv: Delco: V8 (17350020) – $149.99
- Unilite Ignition Module (17350025) – $92.99
- Super Stock Replacement Coil for Improved Performance, Starting, and Power (5024269) – $45.99
Performance Steering Products
- Mallory Kit: Unil Conv: Delco: V8 (17350020) – $149.99
- Unilite Ignition Module (17350025) – $92.99
- Super Stock Replacement Coil for Improved Performance, Starting, and Power (5024269) – $45.99

What types of Performance and Racing Products do you sell for my 1965 Dodge Dart?

As of 11/2/25, these are some of the most in-demand types of Performance and Racing Products for a 1965 Dodge Dart:

Can I get help with 1965 Dodge Dart Performance and Racing Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Dodge Performance and Racing Products and more.

What is your return policy for Dodge Dart Performance and Racing Products?

Advance Auto Parts keeps returns simple. For new Dodge Dart Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1965 Dodge Dart Performance and Racing Products

Competition Cams – VALVE SEALS, TEFLON 3/8" 1 ST (Part No.505-16)

Flowmaster Inc. – DBX Muffler, 2.25in Center Inlet 2.25in Center Outlet, 14in long, Non-Reversible, Moderate Sound (Part No.12414310)

Competition Cams – Xtreme Energy 218/224 Hydraulic Flat Cam (Part No.20-222-3)

Spectre – Valve Cover (Part No.5274)

Energy Suspension – Performance Transmission Mount (Part No.5.1101G)

Competition Cams – High Energy 206/206 Hydraulic Flat Cam and Lifter Kit (Part No.CL20-208-2)

Hooker Headers – Super Comp. Header (Part No.5215-1HKR)

Mr. Gasket – Ultra Seal: Valve Cover Gasket Set (Part No.5876)

Energy Suspension – Torsion Bar Dust Boot Set (Part No.5.13101G)

B & M – Automatic Shifter, Light Truck Megashifter (Part No.80680)

B & M – Flexplate, TF 727 360 CID (Part No.10236)

Energy Suspension – Tie Rod Dust Boot (Part No.9.13102G)

Mallory – Unilite Ignition Module (Part No.605)

Mr. Gasket – Chrome Distributor Hold-Down Clamp (Part No.2503)

Edelbrock – Sure Seat Valve Springs for Chrysler 383-400-413-440 V8 1969-79 (Part No.5792)

Mr. Gasket – High Performance 180 Degree Thermostat for Increased Flow (Part No.4364)

Energy Suspension – Ball Joint Dust Boot Set (Part No.5.13102G)

Mr. Gasket – Intake Manifold Bolt Set – Chevrolet Small Block – Socket Head 3/8"-16 X 1" Bolts & Washers (Part No.956G)

Accel – Supercoil (Part No.140001)

Edelbrock – Cylinder Head Gasket Set for Chrysler (Part No.7325)

Lakewood – Drag Shock-70/30:Ford/GM/Mopar (Part No.40121)

Energy Suspension – Control Arm Bushing Set (Part No.5.3132G)

B & M – Torque Converter, Holeshot 2400 (Part No.10415)

Mallory – Unilite Electronic Ignition Distributor Series 37 (Part No.3757901)

B & M – Chrysler SFI Flexplate – 62 & Later Internally Balanced 8-Bolt Crank – A727 A904 (Part No.10231)

Flowmaster Inc. – 50 Series Muffler, 2in Offset Inlet 2in Center Outlet, Non-Reversible, Moderate Sound (Part No.942051)

Flowtech – Header Gasket Set (Part No.99361FLT)

Mr. Gasket – Exhaust Gasket Set (Part No.358)

FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1432)

Hooker Headers – Super Comp. Header (Part No.5208HKR)

Mr. Gasket – Breather/Oil Filler Cap (Part No.2059)

Mallory – Unilite Ignition Module (Part No.605)

Mallory – Mallory Kit: Unil Conv: Delco: V8 (Part No.501)

Accel – Super Stock Replacement Coil for Improved Performance, Starting, and Power (Part No.8140)

Accel – Super Stock Coil Chrome (Part No.8140C)

Accel – Supercoil (Part No.140001)

Mallory – Distributor Wiring Harness (Part No.29349)

Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)

Edelbrock – Performer 1403 Carburetor: 500 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (Part No.1403)

Holley – Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny (Part No.0-80457S)

Holley – Street Carburetor: 670 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny (Part No.0-80670)

Holley – Mechanical Fuel Pump Mounting Pad Cover (Part No.12-813)

Edelbrock – Performer RPM Series fuel pump is for Small-Block Chrysler (Part No.1720)

Holley – Prem Street Carbs (Avengers) (Part No.0-80870)

Holley – Prem Street Carbs (Avengers) (Part No.0-80570)

Mr. Gasket – Valve Cover Gasket Set (Part No.379)

Competition Cams – VALVE SEALS, TEFLON 3/8" 1 ST (Part No.505-16)

Mr. Gasket – High Performance 180 Degree Thermostat for Increased Flow (Part No.4364)

Mr. Gasket – High Performance Thermostat – 160 Degree Brass & Copper (Part No.4363)

Competition Cams – Xtreme Energy 212/218 Hydraulic Flat Cam and Lifter Kit (Part No.CL20-221-3)

FEL-PRO Performance – Performance Valve Cover Gasket Set (Part No.1607)

Mr. Gasket – High Performance Thermostat (Part No.4365)

Mr. Gasket – Ultra Seal: Valve Cover Gasket Set (Part No.5876)

Mr. Gasket – Intake Manifold Bolt Set – Chevrolet Small Block – Socket Head 3/8"-16 X 1" Bolts & Washers (Part No.956G)

FEL-PRO Performance – Performance Cylinder Head Gasket (Part No.1008)

FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1608)

Competition Cams – Magnum 230/230 Hydraulic Flat Cam (Part No.20-232-4)

Competition Cams – High Energy 218/218 Hydraulic Flat Cam (Part No.20-212-2)

Competition Cams – ENG ROCKER ARM KIT (Part No.1076-KIT)

Competition Cams – High Energy 206/206 Hydraulic Flat Cam K-Kit (Part No.K20-208-2)

Competition Cams – High Energy 218/218 Hydraulic Flat Cam K-Kit (Part No.K20-212-2)

Competition Cams – Nostalgia Plus 233/240 Hydraulic Flat Cam K-Kit for Chrysler 273-360 (Part No.K20-670-4)

B & M – Torque Converter, Holeshot 3000 (Part No.10425)

Competition Cams – High Energy 206/206 Hydraulic Flat Cam and Lifter Kit (Part No.CL20-208-2)

Competition Cams – High Energy 220/220 Solid Flat Cam K-Kit for Chrysler 170-225 6 Cylinder (Part No.K64-241-4)

Competition Cams – Magnum 260/260 Solid Flat Cam and Lifter Kit for Chrysler 273-360 (Part No.CL20-249-4)

Competition Cams – 10 Degree Steel Retainer Set of 100 for 26120 Beehive Spring (Part No.795-100)

Competition Cams – High Energy 220/220 Solid Flat Cam and Lifter Kit Chrysler 170-225 6 Cylinder (Part No.CL64-241-4)

Competition Cams – Nostalgia Plus 239/246 Hydraulic Flat Cam and Lifter Kit for Chrysler 273-360 (Part No.CL20-671-4)