1965 Chevrolet P30 Series Air Intakes
More 1965 Chevrolet P30 Series Air Intakes Categories
If you’re looking for an original Air Intakes replacement for a 1965 Chevrolet P30 Series, you can search through our selection below. You’ll also find aftermarket and OEM Air Intakes to meet your needs.
Essential 1965 Chevrolet P30 Series Air Intakes
Edelbrock – Standard Flow Carburetor Power Valve #12625 Single Stage 2.5in Hg (Part No.12625)
from
$16.99
The Edelbrock #12625 Single Stage 2.5 Hg Power Valve operates by using engine vacuum to control the opening and closing rate. During heavy load or under full power situations, they open to supply additional fuel to the main system to eliminate hesitation
Product Features:
See More
Product Features:
- Gasket Or Seal Included
- 2.5 in. Hg Opening Vacuum
- Single Stage
- Standard Flow Type
- Made In The USA
Edelbrock – Carb Power Valve Block-Off Plug #12624 For Demon, Holley, & Quick Fuel Carbs (Part No.12624)
from
$12.99
The Edelbrock 94 Carburetor power valve block off #12624 is a great way to fine tune your vintage series carburetor. These Edelbrock Power valve Block Off’s will fit Edelbrock Vintage Series 94 carburetors as well as original Holley 94’s and its later var
Product Features:
See More
Product Features:
- Fits Any Demon®, Holley®, And Quick Fuel® Carburetors
- Includes Gasket
- 1/2 in. x 28 Power Valve Thread
- For Applications That Prefer To Run Carbs Without The Power Valves
- Made In The USA
United Carb – Remanufactured Carburetor 1 Barrel (Part No.3-3191)
from
$247.99
Made in the USA, this remanufactured carburetor is completely disassembled and all internal parts, such as gaskets, gas filters, needle/seats and accelerator plunger cups, are discarded. All metal castings are thoroughly cleaned and restored to OEM (original equipment manufacturer) finish. Then the carburetor is reassembled to OEM-quality standards using all new component parts. Each carburetor is flow tested to simulate actual engine conditions, and all internal and external adjustments are set to OEM specifications.
See More
United Carb – Remanufactured Carburetor 2 Barrel (Part No.3-3101)
from
$277.99
Made in the USA, this remanufactured carburetor is completely disassembled and all internal parts, such as gaskets, gas filters, needle/seats and accelerator plunger cups, are discarded. All metal castings are thoroughly cleaned and restored to OEM (original equipment manufacturer) finish. Then the carburetor is reassembled to OEM-quality standards using all new component parts. Each carburetor is flow tested to simulate actual engine conditions, and all internal and external adjustments are set to OEM specifications.
See More
Edelbrock – Carburetor Accelerator Pump Cam Kit #12403 for 2300, 4150, And 4160 Carburetors (Part No.12403)
from
$40.99
The Edelbrock #12403 Accelerator Pump Cam Kit Assortment Package of 8. These accelerator pump cams will have different shapes and profiles, allowing you to fine tune the accelerator pump’s performance to the engine’s requirements. Cam “lift” will directly
Product Features:
See More
Product Features:
- Multi-Color
- Plastic Material
- Fits Holley® 2300, 4150, And 4160 Carburetors
- Set of 8
- Made In The USA
Wells Vehicle Electronics – Carburetor Tune-Up Kit (Part No.2G1781)
from
$35.99
WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to OE designs. Every component either matches or improves on the OE design to ensure fast, easy installation, superior performance and reliability.
See More
Edelbrock – Carburetor Repair Kit #12750 Fits Most Holley 4160 Carburetors (Part No.12750)
from
$43.99
Product Features:
See More
- The Edelbrock #12750 4160 Carburetor rebuild kit is for Holley, Demon and Quick Fuel Carburetors.
- The kit comes with the necessary components to rebuild a 4160 style Carburetor.
Felpro – Air Cleaner Mounting Gasket (Part No.11528)
from
$2.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific, providing unsurpassed quality for a seal you can trust
- Validated for fit, form, and function
- Engineered for the sealing repair environment
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Edelbrock – Carburetor Accelerator Pump Diaphragm #12400 30cc (Part No.12400)
from
$12.99
Product Features:
See More
- The Edelbrock Accelerator Pump Diaphragm 30cc Gasoline #12400 for 4150 Carburetors Proper installation is the responsibility of the installer.
- Improper installation will void your warranty and may result in poor performance and engine or vehicle damage
Edelbrock – Carburetor Accelerator Pump Diaphragm #12401 50cc (Part No.12401)
from
$31.99
Edelbrock #12401 50cc Accelerator Pump Diaphragm for 4150 Carburetors. Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage.
Product Features:
See More
Product Features:
- Rubber Material
- For Holley®, Barry Grant, And Demon Gasoline Carburetors
- No Hardware Included
- 50cc Volume
- Made iIn The USA
Mr. Gasket – Intake Manifold Bolts (Part No.955G)
from
$15.49
These grade 5 socket head bolts are zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 3/8-16 x 1 inch bolts & washers.
Product Features:
See More
Product Features:
- Grade 5 socket head bolts are zinc plated for protection and appearance
- Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds
- Washers Included
ARP Auto Racing – For Use With Chevy 265/ 400 Cubic", Hex Style Head Type, Polished, Ss (Part No.434-2001)
from
$46.49
Prevent intake manifold leaks with ARP quality fasteners. They are rated at 170,000 PSI and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load distribution. Precision rolled threads prevent galling while promoting more consistent torque loading. Facilitates optimum sealing of gasket surfaces. Available in choice of black oxide finish chrome moly or corrosion resistant stainless steel, as well as hex or 12 point heads.
Product Features:
See More
Product Features:
- Nominally Rated At 170,000 PSI Tensile Strength
- Precision Machined Threads For Secure Engagement, And Would not Rust
- Wide Under Head Flange And Companion Washers Provide Even Load Distribution
- Precision Rolled Threads Prevent Galling While Promoting More Consistent Torque Loading
- Facilitates Optimum Sealing Of Gasket Surfaces
- 1″ Long
Felpro – Carburetor Mounting Gasket (Part No.9249)
from
$1.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Felpro – Carburetor Mounting Gasket (Part No.9033)
from
$3.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Edelbrock – Adjustable Carburetor Needle and Seat #12602 Size .097 With Viton Tip (Part No.12602)
from
$18.99
Product Features:
See More
- The Edelbrock #12602 Adjustable Inlet Needle and Seat assembly will fit Carburetors with center hung fuel bowls and can be used as replacements or performance upgrades.
- Kit includes one locking screw, two gaskets and one O-ring. For use with Holley 2300, 4150, 4160, 4165, 4175 and 4500 Series, Quick Fuel 4500, Professional Series and Q-Series, as well as various Demon Carburetors.
Edelbrock – Non-Adjustable Carburetor Needle and Seat #12605 Size .110 With Viton Tip (Part No.12605)
from
$20.99
The Edelbrock #12605 Non-Adjustable Inlet Needle and Seat assembly will fit carburetors with center hung fuel bowls and can be used as replacements or performance upgrades. Kit includes one locking screw, two gaskets and one O-ring. For use with Holley 23
Product Features:
See More
Product Features:
- Center Hung Floats
- 0.11 in. Needle Diameter
- Viton® Needle Material
- Sold Individually
- Non-Adjustable Type
Edelbrock – Standard Main Jet Carburetor Metering Jet #12457 Size .056 (Pair) (Part No.12457)
from
$13.99
The Edelbrock 94 #12457 Carburetor Jets .057″Intended for tuning the Edelbrock 94 carburetor, but will also fit original Holly 94’s and its later variations. Jets sold in pairs.
Product Features:
See More
Product Features:
- 57 Maximum Jet Size
- 0.056 in. Orifice Diameter
- 1/14-32 in. Thread Size
- Standard Main Jet Type
- Set of 2
Edelbrock – Standard Main Jet Carburetor Metering Jet #12459 Size .058 (Pair) (Part No.12459)
from
$13.99
The Edelbrock 94 #12459 Carburetor Jets .059″Intended for tuning the Edelbrock 94 carburetor, but will also fit original Holly 94’s and its later variations. Jets sold in pairs.
Product Features:
See More
Product Features:
- 59 Maximum Jet Size
- 0.058 in. Orifice Diameter
- 1/14-32 in. Thread Size
- Standard Main Jet Type
- Set of 2
Edelbrock – Standard Main Jet Carburetor Metering Jet #12456 Size .055 (Pair) (Part No.12456)
from
$13.99
The Edelbrock 94 #12456 Carburetor Jets .056″ Intended for tuning the Edelbrock 94 carburetor, but will also fit original Holly 94’s and its later variations. Jets sold in pairs.
Product Features:
See More
Product Features:
- 56 Maximum Jet Size
- 0.055 in. Orifice Diameter
- 1/14-32 in. Thread Size
- Standard Main Jet Type
- Set of 2
Edelbrock – RPM Dual-Quad manifold and carb Kit for 1957-86 Small-Block Chevy (Part No.2025)
from
$1776.99
Varying manifold and carburetor combinations. Suits engines air and fuel requirements. High quality Edelbrock intake gasket set. Includes gasgacinch gasket sealer. All necessary hardware included. Resists discoloration from heat. Available in cast, polished or endurashine finish.
Product Features:
See More
Product Features:
- Based on Performer RPM-Series with Unique Air Gap
- Convert From Single To Dual-Quad Intake
- Produces Incredible Top-End Horsepower
- Edelbrock Total Power Package Maximizes Gains
Holley – Intake Manifold (Part No.300-4)
from
$355.99
Holley Intake Manifolds feature a cast aluminum construction and have a long tradition of being one of the best products on the market. Review the information below for Holley intake specifications.
Product Features:
See More
Product Features:
- Single Plane/Open Plenum Design
- Deep Plenum Design With Isolated Runners
- 4150 Square Bore Carburetor Mounting Flange
- Power Band 4500-8500 rpm
- Height Front 4.75 in. Rear 6.25 in.
- Port Size 1.85 in. Height 1.60 in. Width
Edelbrock – Single-Quad Manifold and carb Kit for 1957-86 Small-Block Chevy (Part No.2023)
from
$900.99
The Edelbrock #2023 Single-Quad Manifold and carb kit is designed for 1957-86 Small-Block Chevy applications. With a Manifold and Carb Kit, it’s easy to upgrade your induction system with the best combination of Edelbrock proven performance and looks in a
Product Features:
See More
Product Features:
- Satin Finish
- Single-Quad Manifold
- Thunder Series AVS2 800 cfm Carb
- Performer RPM Manifold
- Made In The USA
Felpro – Engine Intake Manifold Gasket Set (Part No.MS 9617)
from
$19.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
Edelbrock – Intake Manifold Gasket for 1958-1965 348/409 "W-Series" Chevys (Part No.7240)
from
$38.99
Edelbrock part #7240 Intake Gaskets for 1958-1965 348/409 “W-Series”, Large Port Chevys allow for optimum flow and performance. Any gasket can create a seal, but a good gasket can do it with less clamping force, and for a longer period of time. The new MP
Product Features:
See More
Product Features:
- 2.50″x1.31″
- Features Embossed Silicone Bead Around The Intake Ports & Water Openings
- .060″ Thick
- Multi Piece Configuration
- End Seals Not Included
Felpro – Engine Intake Manifold Gasket Set (Part No.MS 9459 B)
from
$28.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Problem-solving gaskets featuring advanced technologies
- Application specific design to ensure a perfect fit
- Exceeds original equipment specifications
- Engineered and manufactured specifically for repair applications
- Unsurpassed quality you can trust
- Includes all parts needed to complete the repair
- Includes all parts needed to complete the repair
Edelbrock – Carburetor Vacuum Secondary Spring Kit #12412 Includes 7 Springs (Part No.12412)
from
$24.99
The Edelbrock #12412 Vacuum Secondary Spring Kit includes 7 springs that will fit on Holley 4150, 4150HP, 4160 series and various Demon Carburetors.
Product Features:
See More
Product Features:
- Steel Material
- For Holley® 4150, 4150HP, 4160; Demon King, Mighty, Race, Road, Sea, Speed; Barry Grant Claw
- Includes Lightest To Heavy
- Set of 7
- Made in The USA
Popular 1965 Chevrolet P30 Series Air Intakes Categories
1965 Chevrolet P30 Series Air Intakes
You count on your 1965 Chevrolet P30 Series to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Air Intakes. With 36 Air Intakes ranging in price from $1.99 to $1,776.99, you’re sure to find everything you need for your 1965 Chevrolet P30 Series.
Brands matter. If you want to shop a specific Air Intakes brand, we stock 6 different brands like Edelbrock, Felpro, and United Carb. 1965 Chevrolet P30 Series Air Intakes start as low as $1.99!
One of the best ways to find top quality OEM or aftermarket Air Intakes is by asking professionals. Short of that, you can shop with confidence thanks to our 78 extensive product reviews on 1965 Chevrolet P30 Series Air Intakes.
Did we mention you can order your Air Intakes from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Air Intakes inventory for your 1965 Chevrolet P30 Series below to get started!
Top-Rated Air Intakes Brands For Your 1965 Chevrolet P30 Series
Trusted Air Intakes OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1965 Chevrolet P30 Series running right for years to come. In our inventory you’ll find brands like Edelbrock, Felpro, United Carb, and even more.
Popular Felpro Air Intakes
You’ll find popular Felpro brand products across Air Cleaner Parts. All are waiting to get your 1965 Chevrolet P30 Series back on the road. Some of the top-rated Felpro products in these categories are:
Top-Rated Edelbrock Air Intakes
If Edelbrock are what you’re looking for, our inventory holds plenty. We stock Edelbrock brand Air Intakes for your 1965 Chevrolet P30 Series, and some of our most reviewed Edelbrock parts include:
from
$16.99
(27)
Standard Flow Carburetor Power Valve #12625 Single Stage 2.5in Hg
Carburetor Power Valves
from
$24.99
(6)
Carburetor Vacuum Secondary Spring Kit #12412 Includes 7 Springs
Carburetor Secondary Diaphragms
from
$14.99
(4)
Carburetor Gasket Kit #12382 Fits 2300, 4150, 4160, 4175, And 4500 Carburetors
Carburetor and Injector Mount Gaskets
FAQs for 1965 Chevrolet P30 Series Air Intakes
What are the most purchased Air Intakes for the 1965 Chevrolet P30 Series?
Out of 36 Air Intakes for the 1965 Chevrolet P30 Series, the most popular in our inventory are:
from
$43.99
This product is not rated
Carburetor Repair Kit #12750 Fits Most Holley 4160 Carburetors
Carburetor and Injector Seal Kits
from
$12.99
(1)
Carburetor Accelerator Pump Diaphragm #12400 30cc
Carburetor Accelerator Pump Diaphragms
from
$57.99
This product is not rated
Carburetor Repair Kit #12760 Fits Most Holley 4150 Carburetors
Carburetor and Injector Seal Kits
