1965 Chevrolet Malibu Bodies and Fender Parts
More 1965 Chevrolet Malibu Bodies and Fender Parts
Find your specific 1965 Chevrolet Malibu original or aftermarket Bodies and Fender Parts below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1965 Chevrolet Malibu Bodies and Fender Parts
KAI – Quarter Panel (Part No.GMK403169066R)
from
$84.99
New Goodmark Passenger Side Rear Quarter Panel, Lower, 11 1/4 Inch High X 33 1/4 Inch Long
Product Features:
See More
Product Features:
- Lower 11 1/4 Inch High X 33 1/4 Inch Long
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Quarter Panel (Part No.GMK403069064L)
from
$84.99
New Goodmark Driver Side Rear Lower Quarter Panel, 7 3/4 Inches High X 29 1/2 Inches Long
Product Features:
See More
Product Features:
- 7 3/4 Inches High X 29 1/2 Inches Long
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Dash Panel Patch (Part No.GMK403052164)
from
$79.99
New Goodmark Dash Panel Patch Upper, 57 Inch X 2 Inch, Between Dash And Windshield
Product Features:
See More
Product Features:
- 57 Inch X 2 Inch Between Dash And Windshield
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Floor Pan (Part No.GMK403051164R)
from
$121.99
New Goodmark Cab Floor Rear Passenger Side, Under Rear Seat, 30 Inch X 26 Inch, EDP Coated
Product Features:
See More
Product Features:
- Under Rear Seat 30 Inch X 26 Inch EDP Coated
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Floor Pan Toe Board (Part No.GMK403037064R)
from
$99.99
New Goodmark Passenger Side T Board Patch
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Liftgate Seal (Part No.GMK403071464S)
from
$79.99
New Goodmark Trunk Lid Weatherstrip Gutter, 2 Piece, Except Wagon/El Camino
Product Features:
See More
Product Features:
- 2 Piece Except Wagon/El Camino
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Deck Lid Seal (Part No.GMK403570378)
from
$84.99
New Goodmark Trunk Weatherstrip
Product Features:
See More
Product Features:
- Made Of Rubber
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Metro Mould – Body Seal Kit (Part No.RKB 2003-101)
from
$90.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro Basic Weatherstrip Kits are designed with parts matched to meet and exceed the specifications of the original part. Basic Kit, for 2-Door Sedan. Door (LM 12-D) Trunk (TK 46-16), Seals. This basic kit from Metro includes the door seals and trunk seal to keep the elements out of your car. Additional important weather seals and detail rubber parts are also available from Metro for many classic and late model vehicles.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- There’s no need to slam when you use Metro SUPERsoft weatherstripping products
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Hardtop Moulding (Part No.RR 5001)
from
$94.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro makes a huge line of Roof Rail Seals that all have that show winning look and fit. Our Roof Rail Seals have a perfect fit. Molded Roof Rail Seals for 2-Door Hardtop Only. Pair. R&L.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- There’s no need to slam when you use Metro SUPERsoft weatherstripping products
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Hardtop Moulding (Part No.RR 5019-T)
from
$131.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro makes a huge line of Roof Rail Seals that all have that show winning look and fit. Our Roof Rail Seals have a perfect fit. Rear Roof Rail Seals. Fits 4-door station wagon. Pair.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- There’s no need to slam when you use Metro SUPERsoft weatherstripping products
- Exact fit
- High quality original equipment replacement part
- Made in the USA
KAI – Body Patch Panel (Part No.GMK4030710640)
from
$144.99
New Goodmark Outer Deck Filler Panel For 2 Door Hardtop Models
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Metro Mould – Hardtop Moulding (Part No.RR 5000)
from
$94.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro makes a huge line of Roof Rail Seals that all have that show winning look and fit. Our Roof Rail Seals have a perfect fit. Molded Roof Rail Seals for 2-Door Hardtop Only. Pair. R&L.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- There’s no need to slam when you use Metro SUPERsoft weatherstripping products
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Windshield Seal (Part No.BT 1)
from
$27.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Butyl Glass Setting Tape. Used to install windshields and backlights. Superior sealing properties. 5/16 In. wide X 15 Ft. long. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense rubber to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Convertible Top Seal (Part No.RR 1609)
from
$356.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s Convertible Top Seals all have that show winning look and fit. Our Convertible Top Seals all incorporate steel cores and studs for a perfect fit. Convertible Top Rail Kit. 7-Piece set includes all right and left side top rail seals and windshield top header seal (HD 729).
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense material to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
KAI – Wheel Arch Trim (Part No.GMK403595578R)
from
$64.99
New Goodmark Passenger Side Rear Wheel Open Molding, Sedan, Made Of Aluminum
Product Features:
See More
Product Features:
- Sedan Made Of Aluminum
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Wheel Arch Trim (Part No.GMK403595578L)
from
$64.99
New Goodmark Driver Side Rear Wheel Open Molding, Sedan, Made Of Aluminum
Product Features:
See More
Product Features:
- Sedan Made Of Aluminum
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Wheel Arch Trim (Part No.GMK403095565L)
from
$54.99
New Goodmark Driver Side Rear Wheel Opening Molding, For Malibu And SS Models, Made Of Aluminum
Product Features:
See More
Product Features:
- For Malibu And SS Models Made Of Aluminum
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Floor Reinforcement (Part No.GMK4030517642)
from
$129.99
New Goodmark Floor Reinforcement Cntr Brace Floor Pan Brace
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Energy Suspension – Body Mount Set (Part No.3.4141G)
from
$232.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.
Product Features:
See More
Product Features:
- Replace to Restore Ride Height
- Gain Durability
- Stronger Than Original Rubber Mounts
Energy Suspension – Body Mount Set (Part No.3.4111R)
from
$148.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.
Product Features:
See More
Product Features:
- Replace to Restore Ride Height
- Gain Durability
- Stronger Than Original Rubber Mounts
KAI – Body Mount Set (Part No.GMK4030990641S)
from
$119.99
New Goodmark Body Mount Set, 10 Bushings, Except Convertible/Wagon/El Camino/SS
Product Features:
See More
Product Features:
- 10 Bushings Except Convertible/Wagon/EL Camino/SS
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Energy Suspension – Body Mount Set (Part No.3.4128R)
from
$149.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.
Product Features:
See More
Product Features:
- Replace to Restore Ride Height
- Gain Durability
- Stronger Than Original Rubber Mounts
KAI – Rear Body Panel (Part No.GMK403185067)
from
$289.99
New Goodmark Tail Panel, Excludes Wagon/El Camino
Product Features:
See More
Product Features:
- Excludes Wagon/El Camino
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Rear Body Panel (Part No.GMK4030850641)
from
$199.99
New Goodmark Rear Body Panel, Center Section, Excludes Wagon
Product Features:
See More
Product Features:
- Center Section Excludes Wagon
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Popular 1965 Chevrolet Malibu Bodies and Fender Parts Categories
1965 Chevrolet Malibu Bodies and Fender Parts
Maybe you’re in the middle of a full rebuild of that 1965 Chevrolet Malibu. Maybe you just need a couple of Bodies and Fender Parts. Either way, Advance Auto Parts has 15 different Bodies and Fender Parts in our inventory ranging from $27.99 to $199.99. That means you can find the exact parts or products you need to keep that 1965 Chevrolet Malibu running smoothly.
Bodies and Fender Parts are only as good as their brand. We stock 3 different brands to make sure you have plenty of trusted parts to choose from for your 1965 Chevrolet Malibu. Energy Suspension, Metro Mould, and KAI are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Bodies and Fender Parts for your 1965 Chevrolet Malibu, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Bodies and Fender Parts to keep your 1965 Chevrolet Malibu rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Bodies and Fender Parts Brands To Make Your 1965 Chevrolet Malibu Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1965 Chevrolet Malibu demands trusted brand parts and products to keep it running. Many trusted brands of Bodies and Fender Parts make up Advance Auto Parts’ inventory, and all are ready to help make your Malibu the best it can be. Be sure to browse some of our top Bodies and Fender Parts brands and parts.
Popular Metro Mould Bodies and Fender Parts
We carry Metro Mould parts in our stock across Weatherstripping categories, plus more. For a 1965 Chevrolet Malibu, our most popular Metro Mould Bodies and Fender Parts include:
FAQs for 1965 Chevrolet Malibu Bodies and Fender Parts
What are the most purchased Bodies and Fender Parts for the 1965 Chevrolet Malibu?
Out of 15 Bodies and Fender Parts for the 1965 Chevrolet Malibu, the most popular in our inventory are:
