1965 Chevrolet K20 Pickup Drivetrains
More 1965 Chevrolet K20 Pickup Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1965 Chevrolet K20 Pickup, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1965 Chevrolet K20 Pickup Drivetrains
Yukon Gear – Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt (Part No.33286)
from
$9.99
5/16″-18 cover bolt, Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, Chrysler 9.25 rear, GM 7.5″, 7.625″, 8.2″, 8.5″, 12 bolt passenger car and truck.
Product Features:
See More
Product Features:
- Cover bolt for Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, GM 7.5″, 7.625″, 8.2″, 8.5″ and 12 bolt passenger car and truck.
- 1/2″ head
Yukon Gear – Mini Spool For GM 10.5" 14 Bolt Truck (Part No.32301)
from
$287.99
Yukon mini spool for GM 10.5″ 14 bolt truck.
Product Features:
See More
Product Features:
- Fits 10.5″ GM 14 bolt truck
- Provides 100% traction to both wheels at all times
- Installs into standard open carrier case
Yukon Gear – Positraction Internals For Dana 44 Dura Grip Posi, 30 Spline (Part No.16168)
from
$399.99
Yukon positraction internals for Dana 44 Dura Grip posi, 30 spline. Does not include clutches. Does NOT fit Trac Loc or Powr Lok. Fits Dura Grip ONLY.
Product Features:
See More
Product Features:
- Spider gear kit
- Fits Dana Spicer 44 with Dura Grip positraction
- Includes two side gears, four pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
Yukon Gear – Dana 44 / 60 And GM 8.5" Inner Front Disconnect Seal Replacement (Part No.30122)
from
$13.99
Inner front disco replacement seal for 4WD Dana 44, Dana 60, and 8.5″ straight axle.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Inner front axle seal
- Fits Dodge disconnect front with Dana Spicer 44 or 60, reverse rotation Dana Spicer 44 and GM 8.5″
Yukon Gear – Dana 44 Carrier Installation Kit Replacement (Part No.57003)
from
$128.99
Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for Dana 44 differential. This kit contains carrier bearings, races and shims.
Product Features:
See More
Product Features:
- Fits Dana Spicer 44
- Includes carrier bearings and races and carrier shim kit
Yukon Gear – Drive Flange Cap For Dana 44 (Part No.32134)
Yukon Gear – Pinion Install Kit For Dana 44 Differential (Part No.13020)
from
$264.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.
Product Features:
See More
Product Features:
- Fits standard rotation Dana Spicer 44 front
- Included are pinion bearings and races, pinion seal, complete pinion shim kit, and marking compound with brush.
Yukon Gear – Dana 44 Grizzly Locker Replacement (Part No.28001)
from
$998.99
The Yukon Grizzly Locker is the ultimate in locking differentials for street, off-road, & drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns. The Yukon Grizzly locker is a mechanical locking differential. It features a forged case and 8620 internals for maximum strength. It’s patented design reduces common locker failures. All units assembled in the USA! All Grizzly Lockers are backed by the best warranty in the business! Yukon covers the replacement unit and covers any collaterally damaged parts and associated labor, up to $2,000!
Product Features:
See More
Product Features:
- Fits Dana Spicer 44 with 30 spline axles
- 3.92 and up ratio only
- Patented internal design reduces common locker failures
- 8620 internals for added strength
- Assembled in the USA
National – Multi Purpose Seal (Part No.471424)
from
$7.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
National – Multi Purpose Seal (Part No.5778V)
from
$69.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; multi-lip
- Temperature range: -100°F to 450°F; -73°C to 232°C
- Resistant to hydrocarbon/oxygenate blends and provides superior performance
- Provides excellent dry running capabilities, low coefficient of friction and excellent resistance to chemicals
- Delivers quality and reliable performance for every type of repair
Yukon Gear – Chrysler 9.25" And Dana 44 / 60 Tracloc Clutch Guide Replacement (Part No.33249)
from
$8.99
Product Features:
See More
- Clutch guide for Chrysler 9.25″, Dana Spicer 44 and Dana Spicer 60
- For Trac Loc positraction applications only
MOOG Driveline Products – Universal Joint U-Bolt Kit (Part No.329-10)
from
$9.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- For U-Joints 353, 354, 361, 369 & 497
- Fits 1-1/16″ bearings
Yukon Gear – Pinion Depth Shims For Ford 9.75" (Part No.55007)
from
$32.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses t
Product Features:
See More
Product Features:
- Pinion depth shims for Ford 9.75″
National – Bearings (Part No.HM88649)
from
$21.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Bearings (Part No.LM501310)
from
$9.29
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Driveworks – Tapered Roller Bearing (Part No.S-362-A)
Yukon Gear – Master Overhaul Kit For Dana 44 Standard Rotation Front Differential With 30 Spline (Part No.14021)
from
$369.99
Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), Thread locking compound, marking compound with brush, and gasket. Yukon’s Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application.
Product Features:
See More
Product Features:
- Fits standard rotation Dana Spicer 44 front
- Included are Timken bearings and races, pinion bearings and races, pinion seal, axle seals, complete shim kit, ring gear bolts, pinion nut, oil baffles and slingers , thread locker, marking compound with brush, and gasket.
Yukon Gear – 10.5" GM 14 Bolt Truck Ring Gear Bolt (Part No.33050)
from
$11.99
10.5″ GM 14 bolt truck ring gear bolt 4.56 & up. 9/16″ x 18. 2.522″ overall length.
Product Features:
See More
Product Features:
- Ring gear bolt for GM 10.5″ 14 bolt truck
- 4.56 and up ratio
- 1/2″ x 18 thread
- 2.522″ overall length
Motive Gear – Differential Gear Install Kit (Part No.D44IK)
National – Multi Purpose Seal (Part No.472394)
from
$9.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Motive Gear – Differential Pinion Nut (Part No.15994582)
National – Shaft Repair Sleeve (Part No.99199)
from
$37.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Yukon Gear – Spindle Nut Washer For GM 10.5" 14 Bolt Truck, 2.160" I.D., 1 Tab (Part No.33511)
National – Multi Purpose Seal (Part No.473204)
from
$10.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
National – Bearings (Part No.02420)
from
$16.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Dana 25 / 27 / 30 / 36 / 44 / 53 Pinion Nut Washer Replacement (Part No.33163)
from
$3.99
Replacement pinion nut washer for Dana 25, 27, 30, 36, 44 & 53.
Product Features:
See More
Product Features:
- Pinion nut washer for Dana Spicer 25, 27, 30, 44 and 50
Mr. Gasket – Differential Gasket (Part No.84B)
from
$18.09
Mr. Gasket Axle Housing/Differential Cover or Rear End Gaskets are manufactured from a .047 inch thick cellulose/nitrile composite gasket material for excellent sealing and durability. They are precision die-cut for an excellent fit. Fits 1964-1970 Chevrolet 8.2 inch 10 bolt & 1970-1981 GM 8.5 inch ring gear
Product Features:
See More
Product Features:
- .047″ thick cellulose/nitrile composite gasket material
- Precision die cut
- Reusable
Spicer – Universal Joint (Part No.5-760X)
from
$51.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More
Popular 1965 Chevrolet K20 Pickup Drivetrains Categories
1965 Chevrolet K20 Pickup Drivetrains
You count on your 1965 Chevrolet K20 Pickup to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 279 Drivetrains ranging in price from $3.99 to $1,302.99, you’re sure to find everything you need for your 1965 Chevrolet K20 Pickup.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 17 different brands like Valvoline, Moog, and Driveworks. 1965 Chevrolet K20 Pickup Drivetrains start as low as $3.99!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 2,643 extensive product reviews on 1965 Chevrolet K20 Pickup Drivetrains. Some of the top-rated Drivetrains products we carry are Greaseable Super Strength Universal Joint with 4.6 stars and Greaseable Premium Universal Joint with 4.0 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1965 Chevrolet K20 Pickup below to get started!
Top-Rated Drivetrains Brands For Your 1965 Chevrolet K20 Pickup
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1965 Chevrolet K20 Pickup running right for years to come. In our inventory you’ll find brands like Valvoline, Moog, Driveworks, and even more.
Popular Valvoline Drivetrains
You’ll find popular Valvoline brand products across Differentials. All are waiting to get your 1965 Chevrolet K20 Pickup back on the road. Some of the top-rated Valvoline products in these categories are:
from
$12.79
(446)
MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart
Differential Oil
FAQs for 1965 Chevrolet K20 Pickup Drivetrains
What are the most purchased Drivetrains for the 1965 Chevrolet K20 Pickup?
Out of 279 Drivetrains for the 1965 Chevrolet K20 Pickup, the most popular in our inventory are:
What are the top-rated 1965 Chevrolet K20 Pickup Drivetrains?
Top-rated Drivetrains for your 1965 Chevrolet K20 Pickup based on customer reviews/ratings are:
from
$32.99
(37)
Greaseable Super Strength Universal Joint
“grease fitting I like location dont like needle design to grease should be regular design fitting”
