1965 Chevrolet K10 Pickup Drive Shafts and Axles

More 1965 Chevrolet K10 Pickup Drive Shafts and Axles

Find your specific 1965 Chevrolet K10 Pickup original or aftermarket Drive Shafts and Axles below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.

Essential 1965 Chevrolet K10 Pickup Drive Shafts and Axles

Yukon Gear – Axle Bearing Retainer Plate For Ya D75786-1X & Ya D75786-2X (Part No.33470)

Axle Bearing Retainer Plate For Ya D75786-1X & Ya D75786-2X

from

$17.99
Product Features:
  • Bearing retainer
  • Fits Yukon axle part numbers YA D75786-1X and YA D75786-2X
See More
View Product

Yukon Gear – Axle Bearing Retainer For Dana 44 Rear (Part No.33542)

Axle Bearing Retainer For Dana 44 Rear

from

$30.99
Product Features:
  • Bearing retainer
  • Fits Dana Spicer 44 with Set 10 bearing
See More
View Product

Yukon Gear – Dana 44 / 60 And GM 8.5" Inner Front Disconnect Seal Replacement (Part No.30122)

Dana 44 / 60 And GM 8.5" Inner Front Disconnect Seal Replacement

from

$13.99
Inner front disco replacement seal for 4WD Dana 44, Dana 60, and 8.5″ straight axle.Yukon Mighty seal.

Product Features:
  • Inner front axle seal
  • Fits Dodge disconnect front with Dana Spicer 44 or 60, reverse rotation Dana Spicer 44 and GM 8.5″
See More
View Product

National – Multi Purpose Seal (Part No.8835S)

Multi Purpose Seal

from

$10.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

(19 reviews)
View Product

Yukon Gear – Yoke For GM 12 Bolt Car & Truck, 1310 U/Joint Size, U-Bolt Design (Part No.41085)

Yoke For GM 12 Bolt Car & Truck, 1310 U/Joint Size, U-Bolt Design

from

$198.99
Yukon yoke for GM 12 bolt car & truck, 1310 u/joint size, u-bolt design. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits GM 12 bolt passenger car and truck
  • 30 spline
  • 1310 u-joint size
  • 3.219″ snap ring span
  • 1.062″ cap diameter
  • Outside snap ring design
  • U-bolt style
See More
View Product

Yukon Gear – Replacement Yoke For Dana 44-HD, 60, And 70 With A 1310 U/Joint Size (Part No.41022)

Replacement Yoke For Dana 44-HD, 60, And 70 With A 1310 U/Joint Size

from

$233.99
Yukon replacement yoke for Dana 44-HD, 60, and 70 with a 1310 U/joint size. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring. This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Dana Spicer 60 and 70
  • 29 spline
  • 1310 u-joint size
  • Outside snap ring design
  • 3.219″ snap ring span
  • 1.062″ cap diameter
  • Strap style
See More
View Product

Yukon Gear – Replacement Redi-Sleeve Yoke Saver For Dana 25, Dana 27, Dana 30, Dana 44, Dana 50 (Part No.30222)

Replacement Redi-Sleeve Yoke Saver For Dana 25, Dana 27, Dana 30, Dana 44, Dana 50

from

$182.99
Replacement redi-sleeve yoke saver for Dana 25, Dana 27, Dana 30, Dana 44, Dana 50 .Yukon Mighty seal.

Product Features:
  • Pinion Redi-sleeve
  • Fits Dana Spicer 25, 27, 30, 4 and 50
See More
View Product

Spicer – Universal Joint (Part No.5-760X)

Universal Joint

from

$51.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More

(7 reviews)
View Product

Spicer – SPICER U-JOINT (Part No.5-1310-1X)

SPICER U-JOINT

from

$44.99
SPICER U-JOINT
View Product

Yukon Gear – C/Clip (Part No.33083)

C/Clip

from

$8.99
C/Clip for Chrysler 8.25″, Ford 7.5″, 8.8″, GM 12 bolt car & truck, 8.2″, 8.5″ & 8.6″.

Product Features:
  • c-clip for Chrysler 8.25″, Ford 8.8″, GM 12 bolt car and truck and GM 8.2″, 8.5″ and 8.6″
  • .150″ thick
See More
View Product

National – Shaft Repair Sleeve (Part No.99125)

Shaft Repair Sleeve

from

$27.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More
View Product

National – Bearings (Part No.HM88610)

Bearings

from

$15.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More
View Product

National – Bearings (Part No.N-1211-L)

Bearings

from

$94.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More
View Product

Yukon Gear – Drive Flange Cap For Dana 44 (Part No.32134)

Drive Flange Cap For Dana 44

from

$109.99
Product Features:
  • Drive flange cap
  • Fits Dana 44
See More
View Product

Driveworks – Clutch Release Bearing (Part No.S-B-2610)

Clutch Release Bearing

from

$15.99
Product Features:
  • Brand may vary by location
See More
View Product

Yukon Gear – Wheel Lug Stud (Part No.33571)

Wheel Lug Stud

from

$7.99
Wheel Lug Stud

(1 reviews)
View Product

Yukon Gear – Replacement Axle Stud For Dana 44 & Model 35 (Part No.33171)

Replacement Axle Stud For Dana 44 & Model 35

from

$5.99
Product Features:
  • Rear axle stud for Dana Spicer 44 and AMC Model 35
  • 1/2″ x 20 thread
  • 0.618″ knurl diameter
  • 1 15/32″ long
  • 31/64″ shoulder length
See More
View Product

Yukon Gear – The Carrier Bearing Puller (Part No.56072)

The Carrier Bearing Puller

from

$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
See More
View Product

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6038)

Center Support Bearing Motor Mount: Center, 1 Piece

from

$34.49
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 84-88; CHEV 60-02; DODGE 57-02; FORD 55-07; GMC 63-02; INTL 57-02; KW 81-18; MACK 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.

Product Features:
  • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
  • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
  • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
  • For Years: 1955-2018
  • Weight approx: 4 Lbs
  • BEARING ID / BORE: 1.5750 INCH / 40 MM
  • CENTERLINE: 2.48 INCH / 63 MM
  • MOUNT WIDTH: 6.62 INCH / 168 MM
  • STYLE: ROUND FRAME
  • NOT PICTURED: TWO DUST SHIELDS
See More

(1 reviews)
View Product

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6035)

Center Support Bearing Motor Mount: Center, 1 Piece

from

$13.49
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to CHEV 58-02; GMC 55-02; INTL 57-02;. Please verify your application.

Product Features:
  • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
  • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
  • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
  • For Years: 1955-2002
  • Weight approx: 2 Lbs
  • BEARING ID / BORE: 1.1811 INCH / 30 MM
  • CENTERLINE: 3.50 INCH / 89 MM
  • MOUNT WIDTH: 1.50 INCH / 38 MM
  • COMPLETE MOUNT
See More
View Product

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6027)

Center Support Bearing Motor Mount: Center, 1 Piece

from

$5.29
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 84-88; CHECKER 55-82; CHEV 60-12; DODGE 87-97; GMC 67-05; MACK 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.

Product Features:
  • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
  • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
  • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
  • For Years: 1955-2012
  • Weight approx: 1 Lbs
  • CUSHION INSERT ONLY
  • FOR COMPLETE MOUNT SEE PART 6056
See More
View Product

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6056)

Center Support Bearing Motor Mount: Center, 1 Piece

from

$22.79
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 84-88; CHECKER 55-82; CHEV 60-12; DODGE 57-02; FORD 55-10; GMC 63-07; INTL 57-02; ISUZU 96-01; KW 81-18; MACK 80-90; MAZDA 87-94; MITS 87-09; OLDS 90-01; PLYM 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.

Product Features:
  • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
  • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
  • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
  • For Years: 1955-2018
  • Weight approx: 3 Lbs
  • BEARING ID / BORE: 1.3780 INCH / 35 MM
  • CENTERLINE: 2.28 INCH / 58 MM
  • MOUNT WIDTH: 6.62 INCH / 168 MM
  • STYLE: ROUND FRAME
  • COMPLETE MOUNT
See More

(13 reviews)
View Product

Yukon Gear – R1559Tv Rear Axle Bearing And Seal Kit (Part No.10001)

R1559Tv Rear Axle Bearing And Seal Kit

from

$52.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. R1559TV axle bearing and seal kit, TorringtonBrand, 2.530″ OD, 1.620″ ID This axle bearing & seal kit services one side only.

Product Features:
  • Includes axle bearing and seal
  • Services one side
  • Torrington Brand
  • 2.530″ O.D.
  • 1.620″ I.D.
See More
View Product

1965 Chevrolet K10 Pickup Drive Shafts and Axles

Maybe you’re in the middle of a full rebuild of that 1965 Chevrolet K10 Pickup. Maybe you just need a couple of Drive Shafts and Axles. Either way, Advance Auto Parts has 28 different Drive Shafts and Axles in our inventory ranging from $5.29 to $883.99. That means you can find the exact parts or products you need to keep that 1965 Chevrolet K10 Pickup running smoothly.

Drive Shafts and Axles are only as good as their brand. We stock 5 different brands to make sure you have plenty of trusted parts to choose from for your 1965 Chevrolet K10 Pickup. Spicer, National, and Anchor are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Drive Shafts and Axles for your 1965 Chevrolet K10 Pickup, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 153 reviews in this category, some of the top rated parts include Center Support Bearing Motor Mount: Center, 1 Piece with 5.0 stars and Wheel Lug Stud with 3.0 stars.

So if you’re in the market for aftermarket Drive Shafts and Axles to keep your 1965 Chevrolet K10 Pickup rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Drive Shafts and Axles Brands To Make Your 1965 Chevrolet K10 Pickup Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1965 Chevrolet K10 Pickup demands trusted brand parts and products to keep it running. Many trusted brands of Drive Shafts and Axles make up Advance Auto Parts’ inventory, and all are ready to help make your K10 Pickup the best it can be. Be sure to browse some of our top Drive Shafts and Axles brands and parts.

Popular National Drive Shafts and Axles

We carry National parts in our stock across Axle Shaft Seals categories, plus more. For a 1965 Chevrolet K10 Pickup, our most popular National Drive Shafts and Axles include:
Multi Purpose Seal
from $10.99
(19)
Multi Purpose Seal
Axle Shaft Seals

FAQs for 1965 Chevrolet K10 Pickup Drive Shafts and Axles

What are the most purchased Drive Shafts and Axles for the 1965 Chevrolet K10 Pickup?

Out of 28 Drive Shafts and Axles for the 1965 Chevrolet K10 Pickup, the most popular in our inventory are:
Universal Joint
from $28.99
(12)
Universal Joint
Axle Shaft Universal Joints
Universal Joint
from $42.99
(5)
Universal Joint
Axle Shaft Universal Joints
Center Support Bearing Motor Mount: Center, 1 Piece
from $22.79
(13)
Center Support Bearing Motor Mount: Center, 1 Piece
Center Support Bearings

What are the top-rated 1965 Chevrolet K10 Pickup Drive Shafts and Axles?

Top-rated Drive Shafts and Axles for your 1965 Chevrolet K10 Pickup based on customer reviews/ratings are:
Center Support Bearing Motor Mount: Center, 1 Piece
from $34.49
(1)
Center Support Bearing Motor Mount: Center, 1 Piece
“to high”
Wheel Lug Stud
from $7.99
(1)
Wheel Lug Stud
“These are SCREW in design (even though the image shows press) not entirely sure how they “fit” my 2016 JKU Rubicon since my factory and Yukon after ma”

More Popular Parts for All Makes