1965 Chevrolet C30 Pickup Ignition and Tune-Up Products

Essential 1965 Chevrolet C30 Pickup Ignition and Tune-Up Products

MSD Ignition – Distributor; Chevy V8 with Internal Module (Part No.8360)

Distributor; Chevy V8 with Internal Module

from

$469.99
The Pro-Billet Ready-to-Run distributor is the perfect upgrade for outdated points distributors or bulky HEI. Simply install the distributor in the engine, connect three wires, the coil and fire it up! A maintenance-free magnetic pick-up accurately triggers the module. The increased output of the amplifier easily outperforms stock ignitions and will smooth out the engine’s idle, improve starting and provide a much higher RPM range. The Ready-to-Run features MSD’s adjustable mechanical advance which allows you to custom tailor an ignition curve to match your engine’s needs. There is also a vacuum advance canister to help improve economy. For positive street performance, the Ready-to-Run is the best choice.

Product Features:
  • Simple and clean three wire installation
  • Supplied w/An HEI Style Distributor Cap And Rotor
  • Accepts Cap-A-Dapts
  • Does not require an MSD Ignition Control
  • CARB E.O. Approved
  • Now includes built-in Rev Limiter
  • O-ring seals can be installed for oil press. control (Mods only)
  • Special oil tract improves lubrication to the dist./cam gear
See More

Dorman – Help – Spark Plug Non-Foulers – 14mm Gasket Seat Long Reach (Part No.42004)

Spark Plug Non-Foulers - 14mm Gasket Seat Long Reach

from

$9.99
This spark plug non fouler is designed for easy installation on specified vehicles to protect spark plugs from fouling and damage. It is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this spark plug non fouler is designed for easy installation to protect spark plugs from fouling and damage on specified vehicles
  • Ideal solution – this non-fouler preserves spark plug life and is a reliable replacement for an original non-fouler that has failed due to corrosion
  • Durable construction – made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Mr. Gasket – Hei Advance Curve Kit (Part No.929G)

Hei Advance Curve Kit

from

$16.49
One of the best, and sometimes missed tuning tricks is not to just optimize your initial timing, but to bring in timing advance more quickly than the stock distributor can allow. Bringing timing more quickly than stock can provide substantial increases in both torque and horsepower depending on your combination.This is done by changing the springs under the cap. This kit includes three sets of springs which can be used in different combinations to provide full advance sooner than stock. Use lighter springs to bring the advance more quickly, and heavier springs to bring it in more slowly. Two new weights with nylon bushings are also included as are instructions to help with installation. Springs are color code as follows: Light Springs – Black Medium Springs – Silver Heavy Springs – Gold

Product Features:
  • Brings in timing more quickly than stock for more torque and horsepower
  • Includes three sets of springs to allow for a wider range of custom tuning
  • Instructions included to help with installation
See More

MSD Ignition – Wire Set; Super Conductor; Small Block Chevy with L.P. Distributor (Part No.31249)

Wire Set; Super Conductor; Small Block Chevy with L.P. Distributor

from

$126.99
The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.

Product Features:
  • Less than 50 ohms per foot for superior spark
  • Ferro-magnetic impregnated core creates an effective EMI choke
  • 40 ft. Of Conductor Wound Into A Single Foot Of Wire
  • For high EMI suppression
  • Conductor core features Dupont Kevlar material
  • Proprietary compound sleeves for resistance to high heat/abrasion
See More

MSD Ignition – Distributor Gear; MSD Chevy Distributor; .500 ID; Iron (Part No.8531)

Distributor Gear; MSD Chevy Distributor; .500 ID; Iron

from

$54.39
This gear test fixture features variable rpm and oil pressure control allowing MSD engineers the ability to maintain the exact conditions that they want for gear tests. Severe loads can be placed on the gear and the fixture can spin up to 10,000 rpm. Features increased outer hardened layer thickness (RC 55-60). Micro polished surface for smooth contact. Proprietary formulated ductile iron. Melonite QPQ coated reduces friction and initial wear. Interstitial carbide concentration improves wear resistance and running properties.

Product Features:
  • Increased outer hardened layer thickness (RC 55-60)
  • Micro Polished Surface For Smooth Contact
  • Proprietary formulated ductile iron.
  • Melonite QPQ coated reduces friction and initial wear
  • Interstitial carbide improves wear resistance/running properties
See More

Accel – 8Mm Super Stock Graphite Uni (Part No.4041K)

8Mm Super Stock Graphite Uni

from

$72.99
ACCEL’s SuperStock 4000 series spark plug wire sets are designed to upgrade an OE ignition system for high-spark delivery levels for street driven applications. The 450 degree F rated silicone jacket is extruded over a tightly woven, rugged fiberglass braid. The braid is applied over high dielectric strength EPDM (Ethylene Propylene Diene Monomer) inner insulation for ignition wire performance that exceeds SAE specifications.

Product Features:
  • 7mm And 8mm High Gloss Silicone Jacket
  • 450 F Rated Silicone Jacket
  • Stainless Steel Plug Terminals
  • RFI Suppression For Street Driven Applications
  • Custom-fit Universal And Import Coverage
  • High-strength Fiberglass Braid Construction
  • Pre And Post HEI Vehicles
See More

ACDelco – Ignition Switch (Part No.D1405B)

Ignition Switch

from

$31.49
An ACDelco GM Original Equipment Ignition Starter Switch is a GM-recommended replacement for your vehicle’s original component. It is a multi-position switch that activates the ignition, accessory, and cranking circuits in your vehicle. This original equipment ignition starter switch has been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Work with vehicle electronics to help optimize vehicle capabilities
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

ACDelco – Ignition Capacitor (Part No.D204)

Ignition Capacitor

from

$16.99
ACDelco Professional Ignition Condenser is a high quality aftermarket replacement component for one or more of the following vehicle systems: cooling, hvac, ignition, starting and charging, body-electrical and lighting, wiper and washer, and/or engine fuel management. This premium aftermarket condenser is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

Carquest – Ignition Coil: Meets OE Specifications, 1 Count (Part No.26C1041)

Ignition Coil: Meets OE Specifications, 1 Count

from

$35.49
Carquest ignition coils meet original equipment (OE) fit, form and function and are built to ensure reliable starting and performance. Carquest ignition coils are tested to ensure proper spark and perfect fit for each application. These ignition coils are an affordable repair choice to restore the vehicle’s ignition system performance. Carquest ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Long service life and durable performance
  • High dielectric strength for reliability
  • Corrosion-resistant connections
  • Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
  • High reliability
  • Long service life
See More

ACDelco – Ignition Distributor Cap (Part No.D308R)

Ignition Distributor Cap

from

$24.29
ACDelco Professional Distributor Cap is a high quality aftermarket replacement component for one or more of the following vehicle systems: cooling, hvac, ignition, starting and charging, body-electrical and lighting, wiper and washer, and/or engine fuel management. This premium aftermarket cap is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

Autolite – Copper Spark Plug: Delivers Quick Starts, Good Fuel Economy, Smooth Acceleration (Part No.64)

Copper Spark Plug: Delivers Quick Starts, Good Fuel Economy, Smooth Acceleration

from

$3.49
With over 100 years of engineering expertise and more than 11 billion plugs sold, Autolite continues to set the standard in spark plug technology. Designed and engineered in the USA, these spark plugs feature a copper-glass seal that bonds the insulator, terminal post, and center electrode together, ensuring full voltage at the spark gap with a 100% leak-proof, gas-tight seal. The multi-rib insulator minimizes the risk of flash-over, while the one-piece terminal post adds strength and durability. Additionally, the built-in resistor reduces radio frequency interference (RFI) and electrode erosion, making these plugs a reliable choice for enhancing your vehicle’s performance.

Product Features:
  • Copper-glass seal bonds insulator, terminal post center electrode together; assures full required voltage at spark gap; gas-tight seal (100% leak proof)
  • Multi-rib insulator reduces danger of “flash-over”
  • One-piece terminal post adds strength
  • Resistor reduces radio frequency interference (RFI) and electrode erosion
  • Quick Starts and Smooth Acceleration: The Autolite Copper Spark Plug is engineered to deliver quick starts and smooth acceleration, enhancing your vehicle’s overall performance.
  • Good Fuel Economy: Designed to optimize fuel efficiency, these spark plugs help you achieve better fuel economy, saving you money at the pump.
See More

Carquest – Distributor Rotor (Part No.23A1019)

Distributor Rotor

from

$5.49
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • High-quality products that meet OE appearance and performance to
See More

KAI – Ignition Switch Retainer (Part No.GMK4142527641)

Ignition Switch Retainer

from

$20.49
New Goodmark Ignition Switch Nut

Product Features:
  • Made Of Die Cast
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Carquest Premium – Ignition Conversion Kit (Part No.CBA1798)

Ignition Conversion Kit

from

$411.99
Ignition Conversion Kit

Carquest Premium – Ignition Conversion Kit (Part No.CBA1799)

Ignition Conversion Kit

from

$415.99
Ignition Conversion Kit

Carquest Premium – Ignition Coil Mounting Bracket (Part No.MBA1001)

Ignition Coil Mounting Bracket

from

$11.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Designed to meet or exceed OE specifications in form, fit and function
See More

MSD Ignition – Wire Set; Black Super Conductor; Small Block Chevy; Socket Cap (Part No.31653)

Wire Set; Black Super Conductor; Small Block Chevy; Socket Cap

from

$181.99
The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.

Product Features:
  • Custom Fit For Make And Model Listed
  • Wires Are Pre-Cut To Exact Specifications
  • Bolt-on Performance
  • Conductor core features DuPont Kevlar material for increased tensile strength
  • Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
  • Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately
See More

Accel – Universal Fit Super Stock 8mm Suppression; Spark Plug Wire Set (Part No.4040R)

Universal Fit Super Stock 8mm Suppression; Spark Plug Wire Set

from

$65.99
These ACCEL wire sets are a true performance upgrade replacement for OE types. Efficient delivery of spark energy for a good price. Silicone boots with black wire contain zinc-plated steel terminals. Noise suppression core. Set contains 8 plug wires with coil lead.

Product Features:
  • 7mm And 8mm High Gloss Silicone Jacket
  • 450° F Rated Silicone Jacket
  • Stainless Steel Plug Terminals
  • RFI Suppression For Street Driven Applications
  • Custom-fit Universal And Import Coverage
  • High-strength Fiberglass Braid Construction
  • Pre And Post HEI Vehicles
See More

MSD Ignition – Trigger Wheel; Flying Magnet; Big Block Chevy (Part No.8621)

Trigger Wheel; Flying Magnet; Big Block Chevy

from

$338.99
Replacement crank trigger wheel for big block Chevy 8 In. balancer. For a long time racers have known that one of the best things to do to an engine to improve its performance is to stabilize ignition timing. The MSD flying magnetic crank trigger system does exactly that by using four magnets embedded in an aluminum wheel. This is the replacement part for the aluminum crank trigger wheel.

Product Features:
  • Accurate Trigger Signals
  • Non-Magnetic Pickup Cannot Be False Triggered
  • Parts CNC Machined Aluminum In Red Anodized Finish
  • Wide Range Of Timing Adjustment
See More

MSD Ignition – Trigger Wheel; Flying Magnet; Small Block Chevy (Part No.8611)

Trigger Wheel; Flying Magnet; Small Block Chevy

from

$290.99
For a long time, racers have known that one of the best things to do to an engine to improve its performance is to stabilize the ignition timing. The MSD flying magnet crank trigger system does exactly that by using magnets embedded in an aluminum wheel. The MSD flying magnet crank trigger uses four magnets secured in the aluminum trigger wheel that pass by a stationary non-magnetic pick-up to trigger the ignition. This flying magnet design produces accurate trigger signals and the non-magnetic pick-up cannot be false triggered. Each flying magnet crank trigger includes a two-piece mounting bracket for the non-magnetic pick-up that in most cases will work on either the passenger side or driver’s side of the engine (the SB Chrysler and SB Ford brackets mount on only one side). The adjustable bracket provides a wide range of timing adjustment and spacers are included. These systems will trigger MSD 6, 7, 8 and 10 series ignitions and all MSD timing accessories.

Product Features:
  • Replacement crank trigger wheel for small block Chevy
  • Absolutely the most accurate way to trigger the ignition
  • The non-magnetic pickup cannot be false triggered
  • Powerful magnets are embedded in a billet aluminum trigger wheel
See More

Carquest Premium – Ignition Contact Set and Condenser Kit (Part No.ALA1001)

Ignition Contact Set and Condenser Kit

from

$38.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Ignition Contact Set (Part No.AMA1057)

Ignition Contact Set

from

$22.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

PerTronix – D9011 Flame-Thrower HEI Distributor Counter Clockwise Vacuum Lockout Kit (Part No.D9011)

D9011 Flame-Thrower HEI Distributor Counter Clockwise Vacuum Lockout Kit

from

$10.99
Vacuum Advance & LockoutThese vacuum canisters help optimize ignition advance for maximum part throttle performance and cruise speed efficiency. Our vacuum lockout plates allow for precise pickup coil position and accurate rotor phasing.

Product Features:
  • PerTronix D9011 Flame-Thrower HEI Distributor Counter Clockwise Vacuum Lockout Kit
  • These vacuum canisters help optimize ignition advance for maximum part throttle performance and cruise speed efficiency.
See More

MSD Ignition – Vacuum Advance Lockout; PN 8360; PN 8361; PN 8572 (Part No.8468)

Vacuum Advance Lockout; PN 8360; PN 8361; PN 8572

from

$14.49
This bracket allows you to easily remove the vacuum advance from MSD distributors that are CW rotation (except PN 8365 and PN 8362).

Product Features:
  • Vacuum Advance Lockout
  • Distributor Accessories
  • For Use On PN[8360/8361/8572]
  • Size Can Be Used w/Distributor PN[8360/8361/8572]
See More

Carquest Premium – Distributor Vacuum Advance (Part No.VBC1088)

Distributor Vacuum Advance

from

$14.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Spark Plug Wire Set: 7 Wires, Increased performance, Designed for direct fit (Part No.35-6188)

Spark Plug Wire Set: 7 Wires, Increased performance, Designed for direct fit

from

$35.99
Product Features:
  • SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
  • Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
  • 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
  • EPDM inner insulation stops power-robbing voltage leaks.
  • With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
  • Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
  • Excellent interference suppression and consistent performance
  • Easy lock terminals for more convenient installation.
  • Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
  • Broad coverage available for most vehicles on the road today
  • Include grease pack to ensure easy installation and removal
See More

Carquest Premium – Spark Plug Wire Set: 7 Wires, Increased performance, Designed for direct fit (Part No.35-6326)

Spark Plug Wire Set: 7 Wires, Increased performance, Designed for direct fit

from

$46.99
Product Features:
  • SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
  • Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
  • 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
  • EPDM inner insulation stops power-robbing voltage leaks.
  • With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
  • Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
  • Excellent interference suppression and consistent performance
  • Easy lock terminals for more convenient installation.
  • Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
  • Broad coverage available for most vehicles on the road today
  • Include grease pack to ensure easy installation and removal
See More

MSD Ignition – Wire Set; Super Conductor; Chevy 366-454 with HEI Cap (Part No.35379)

Wire Set; Super Conductor; Chevy 366-454 with HEI Cap

from

$109.99
The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.

Product Features:
  • Bolt-on Performance
  • Custom Fit For Make And Model Listed
  • Wires Are Pre-Cut To Exact Specifications
See More

1965 Chevrolet C30 Pickup Ignition and Tune-Up Products

You count on your 1965 Chevrolet C30 Pickup to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Ignition and Tune-Up Products. With 149 Ignition and Tune-Up Products ranging in price from $1.49 to $593.99, you’re sure to find everything you need for your 1965 Chevrolet C30 Pickup.

Brands matter. If you want to shop a specific Ignition and Tune-Up Products brand, we stock 16 different brands like NGK, Champion, and ACDelco. 1965 Chevrolet C30 Pickup Ignition and Tune-Up Products start as low as $1.49!

One of the best ways to find top quality OEM or aftermarket Ignition and Tune-Up Products is by asking professionals. Short of that, you can shop with confidence thanks to our 448 extensive product reviews on 1965 Chevrolet C30 Pickup Ignition and Tune-Up Products. Some of the top-rated Ignition and Tune-Up Products products we carry are Blaster 2 Coil: High Performance Ignition Upgrade with 4.3 stars and Ignition Coil with 4.5 stars.

Did we mention you can order your Ignition and Tune-Up Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Ignition and Tune-Up Products inventory for your 1965 Chevrolet C30 Pickup below to get started!

Top-Rated Ignition and Tune-Up Products Brands For Your 1965 Chevrolet C30 Pickup

Trusted Ignition and Tune-Up Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1965 Chevrolet C30 Pickup running right for years to come. In our inventory you’ll find brands like NGK, Champion, ACDelco, and even more.

Popular Champion Ignition and Tune-Up Products

You’ll find popular Champion brand products across Spark Plugs. All are waiting to get your 1965 Chevrolet C30 Pickup back on the road. Some of the top-rated Champion products in these categories are:

Top-Rated Accel Ignition and Tune-Up Products


If Accel are what you’re looking for, our inventory holds plenty. We stock Accel brand Ignition and Tune-Up Products for your 1965 Chevrolet C30 Pickup, and some of our most reviewed Accel parts include:
8Mm Super Stock Graphite Uni
from $63.29
(25)
8Mm Super Stock Graphite Uni
Optional Spark Plug Wires
7Mm Super Stock Copper Uni
from $53.09
(12)
7Mm Super Stock Copper Uni
Optional Spark Plug Wires
8Mm Super Stock Spiral Uni Rd
from $101.99
(11)
8Mm Super Stock Spiral Uni Rd
Optional Spark Plug Wires

FAQs for 1965 Chevrolet C30 Pickup Ignition and Tune-Up Products

What are the most purchased Ignition and Tune-Up Products for the 1965 Chevrolet C30 Pickup?

Out of 149 Ignition and Tune-Up Products for the 1965 Chevrolet C30 Pickup, the most popular in our inventory are:

What are the top-rated 1965 Chevrolet C30 Pickup Ignition and Tune-Up Products?

Top-rated Ignition and Tune-Up Products for your 1965 Chevrolet C30 Pickup based on customer reviews/ratings are:
Blaster 2 Coil: High Performance Ignition Upgrade
from $49.99
(20)
Blaster 2 Coil: High Performance Ignition Upgrade
“Had one before and blew it up, good easy replacement. MSD makes a good product.”
Ignition Coil
from $35.05
(17)
Ignition Coil
“I used this on my 1950 ford tractor.”