1965 Chevrolet C20 Pickup Ignition Wires
More 1965 Chevrolet C20 Pickup Ignition Wires
Find your specific 1965 Chevrolet C20 Pickup original or aftermarket Ignition Wires below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1965 Chevrolet C20 Pickup Ignition Wires
Accel – Universal Fit Super Stock 8mm Spiral; Spark Plug Wire Set (Part No.5041B)
from
$84.99
The traditional ACCEL combination of yellow wire and red spark plug boots has been added to these Super Stock Spiral Core 5000 Series wire sets, which feature color-matched wire and spark plug boots in blue, black, and red. With only 500 ohms/ft. of resistance, more ignition energy can reach the spark plug, producing a longer-lasting, hotter spark flame kernel. The results is higher performance through improved efficiency, quicker throttle response, and reduced emissions. This 8mm wire’s double silicone construction is rated to 550 degrees F. The high-gloss wire jacket resists moisture, chemicals, and heat extremes for longer life and great looks. The fiberglass braid adds greater pull strength and terminal retention, while the stainless steel spark plug terminals provide excellent long life, electrical conductivity, and corrosion resistance. Both universal and custom-fit applications are available for early and late model cars and trucks.
Product Features:
See More
Product Features:
- Silicone Spark Plug Boots
- 90 Degree Spark Plug Boot Angle
- 450 Degree Wire Temperature Rating
- Meets Or Exceeds OE Boot Temperature Rating
- Meets or Exceeds OE Resistance
- Cooper Core
- 500 Ohms Resistance
MSD Ignition – Wire Set; Black Super Conductor; Small Block Chevy with L.P. Distributor (Part No.31243)
from
$122.99
The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.
Product Features:
See More
Product Features:
- Less than 50 ohms per foot for superior spark
- Ferro-magnetic impregnated core creates an effective EMI choke
- 40 ft. Of Conductor Wound Into A Single Foot Of Wire
- For high EMI suppression
- Conductor core features Dupont Kevlar material
- Proprietary compound sleeves for resistance to high heat/abrasion
MSD Ignition – Wire Set; Super Conductor; Chevy 454; HEI; 74-76; (Part No.31369)
from
$133.99
The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.
Product Features:
See More
Product Features:
- Custom Fit For Make And Model Listed
- Wires Are Pre-Cut To Exact Specifications
- Bolt-on Performance
- Conductor core features DuPont Kevlar material for increased tensile strength
- Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
- Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately
MSD Ignition – Wire Set; Super Conductor; Chevy 366-454 with HEI Cap (Part No.35379)
from
$143.99
The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.
Product Features:
See More
Product Features:
- Bolt-on Performance
- Custom Fit For Make And Model Listed
- Wires Are Pre-Cut To Exact Specifications
Accel – Universal Fit Super Stock 7mm Copper; Spark Plug Wire Set (Part No.3008)
from
$44.99
Upgrade for pre-HEI street applications, silicone jacket with fiberglass braid is rated at 450 degrees Fahrenheit, tinned copper core. Includes 8 blue extra-long wires, coil lead, silicone boots, zinc-plated steel terminals. Requires terminal and boot installation on distributor end of wires.
Product Features:
See More
Product Features:
- 7 mm Yellow Silicone Jacket
- Street-driven Applications
Accel – Universal Fit Super Stock 8mm Suppression; Spark Plug Wire Set (Part No.4040)
from
$61.99
These ACCEL wire sets are a true performance upgrade replacement for OE types. Efficient delivery of spark energy for a good price. Silicone boots with black wire contain zinc-plated steel terminals. Noise suppression core. Set contains 8 plug wires with coil lead.
Product Features:
See More
Product Features:
- 7mm And 8mm High Gloss Silicone Jacket
- 450° F Rated Silicone Jacket
- Stainless Steel Plug Terminals
- RFI Suppression For Street Driven Applications
- Custom-fit Universal And Import Coverage
- High-strength Fiberglass Braid Construction
Accel – Universal Fit Spiral 8.8mm Core Spark Plug Wire Set (Part No.8030)
from
$83.99
Universal Fit Spiral 8.8mm Core Spark Plug Wire Set; 90-Degree; with Points-Style Distributor Cap; Yellow.
Product Features:
See More
Product Features:
- 8.8mm Graphite Suppression
- Silicone Spark Plug Boots
- 550-Degree Double Silicone Construction
- Fiberglass Braid
- Spiral-Wound Stainless-Steel Alloy
- Magnetic Suppression
Accel – Universal Fit Super Stock 8mm Spiral; Spark Plug Wire Set (Part No.5041R)
from
$116.99
The traditional ACCEL combination of yellow wire and red spark plug boots has been added to these Super Stock Spiral Core 5000 Series wire sets, which feature color-matched wire and spark plug boots in blue, black, and red. With only 500 ohms/ft. of resistance, more ignition energy can reach the spark plug, producing a longer-lasting, hotter spark flame kernel. The results is higher performance through improved efficiency, quicker throttle response, and reduced emissions. This 8mm wire’s double silicone construction is rated to 550 degrees F. The high-gloss wire jacket resists moisture, chemicals, and heat extremes for longer life and great looks. The fiberglass braid adds greater pull strength and terminal retention, while the stainless steel spark plug terminals provide excellent long life, electrical conductivity, and corrosion resistance. Both universal and custom-fit applications are available for early and late model cars and trucks.
Product Features:
See More
Product Features:
- 500 Ohms Per Foot Of Resistance
- 550 Degree F Rated Silicone Jacket
- Stainless Steel Plug Terminals
- High RFI Suppression For Street/Strip Use
- Custom-fit Universal And Import Coverage
- High-strength Fiberglass Braid Construction
- Pre And Post HEI Vehicles
Accel – Universal Fit Super Stock 7mm Copper; Spark Plug Wire Set (Part No.3009)
from
$49.99
Upgrade for pre-HEI street applications, silicone jacket with fiberglass braid is rated at 450 degrees Fahrenheit, tinned copper core. Includes 8 blue extra-long wires, coil lead, silicone boots, zinc-plated steel terminals. Requires terminal and boot installation on distributor end of wires.
Product Features:
See More
Product Features:
- Suppression Core
- Universal Fit
Mallory – Pro Sidewinder Spark Plug Wire Kit (Part No.947)
from
$125.99
Features at a glance, low 300 Ohm resistance spiral core delivers high energy output for maximum spark at the plug. Great RFI suppression meets the demands of today’s on-board electronics, such as electronic ignition, sound systems, and computer controls. 8MM ozone-resistant red silicone jacket repels water, oil, grease, and fuel, and withstands temperatures up to 500 degrees. Fits V8, universal wire kit; includes 45 degree spark plug boots, female socket (standard) distributor boots and terminals.
Product Features:
See More
Product Features:
- Most Advanced Wire By Mallory
- RFI Suppression
- High Temperature Silicone Jacket
- Withstands Over 500+F
- Come In Ready To Use Kits
- Extra Long Kits
Accel – Universal Fit Graphite Suppression; Spark Plug Wire Set (Part No.8026)
from
$128.99
These ACCEL carbon and graphite core wire sets virtually eliminate RFI noise, while providing maximum conductivity for ultimate performance in any race or street application. Double silicon insulation eliminates leakage and misfire.
Product Features:
See More
Product Features:
- Heavy Duty 8.8mm Oversized Silicone Jacket
- 500 Ohms/ft. Of Resistance
- 550 Degree Double Silicone Construction
- Fiberglass Braid
- Carbon/Graphite Core
- Magnetic Suppression
- Fiberglass/Kevlar Core
- 500 Ohms Resistance
Accel – Universal Fit Super Stock 8mm Spiral; Spark Plug Wire Set (Part No.5040K)
from
$77.99
These ACCEL Super Stock wire sets are a true performance upgrade replacement for OE types. Efficient delivery of spark energy for a good price. Silicone boots with zinc-plated steel terminals.
Product Features:
See More
Product Features:
- 500 Ohms Per Foot Of Resistance
- 550 Degree F Rated Silicone Jacket
- Stainless Steel Plug Terminals
- High RFI Suppression For Street/Strip Use
- Custom Fit Universal and Import Coverage
- High-strength Fiberglass Braid Construction
- Pre And Post HEI Vehicles
MSD Ignition – Wire Set; Super Conductor; Multi-Angle Plug; Socket/HEI (Part No.31179)
from
$133.99
Set includes terminals for engines with early type (socket) and late type (HEI spark plug top) distributor caps. 90 degree boots and terminals factory installed on one end.
Product Features:
See More
Product Features:
- Extra Long 8.5mm Wires So You Can Cut To Your Designed Length
- Incl. both socket-style and spark plug-style boots and terminals
- Includes Mini-Stripper-Crimper For Factory Style Crimps
- Size Includes [6] 90 Deg. Boots/Terminals
- Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
- Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately
MSD Ignition – Wire Set; Street Fire; Chevy 366-454; Socket (Part No.5561)
from
$61.99
The street fire spark plug wires feature a low resistance conductor that’s wrapped in a sleek and durable black sleeve. The terminals are covered in black boots that protect the conductor from engine heat to ensure spark delivery.
Product Features:
See More
Product Features:
- Helically wound conductor suppresses electro and radio noise
- Kevlar core combination for great strength and durability
- Heavy Duty Terminals For Secure Connection
- 8mm silicone and synthetic jacket resists heat and abrasion
- 500 Ohms/ft. Resistance For Improved Spark Delivery And Power
- Silicone Boots Protect Against High Exhaust Temps
Carquest Premium – Spark Plug Wire Set: 7 Wires, Increased performance, Designed for direct fit (Part No.35-6188)
from
$35.99
Product Features:
See More
- SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
- Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
- 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
- EPDM inner insulation stops power-robbing voltage leaks.
- With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
- Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
- Excellent interference suppression and consistent performance
- Easy lock terminals for more convenient installation.
- Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
- Broad coverage available for most vehicles on the road today
- Include grease pack to ensure easy installation and removal
MSD Ignition – Wire Set; Street Fire; SBC; Socket Distributor Cap over VC (Part No.5565)
from
$61.99
The street fire spark plug wires feature a low resistance conductor that’s wrapped in a sleek and durable black sleeve. The terminals are covered in black boots that protect the conductor from engine heat to ensure spark delivery.
Product Features:
See More
Product Features:
- Helically wound conductor suppresses electro and radio noise
- Kevlar core combination for great strength and durability
- Heavy Duty Terminals For Secure Connection
- 8mm silicone and synthetic jacket resists heat and abrasion
- 500 Ohms/ft. Resistance For Improved Spark Delivery And Power
- Silicone Boots Protect Against High Exhaust Temps
NGK – NGK Wire Set (Part No.51428)
from
$39.49
NGK ultra-low resistance mag core wire sets provide outstanding performance and durability. High-temp premium silicone outer jacket and inner EPDM/silicone insulation contain high voltage currents for excellent dielectric strength. Stainless steel winding
Product Features:
See More
Product Features:
- PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
- BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
- STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
- CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
MSD Ignition – Wire Set; Black Super Conductor; Small Block Chevy; Socket (Part No.31593)
from
$153.99
The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.
Product Features:
See More
Product Features:
- Less than 50 ohms per foot for superior spark
- Ferro-magnetic impregnated core creates an effective EMI choke
- 40 ft. Of Conductor Wound Into A Single Foot Of Wire
- For high EMI suppression
- Conductor core features Dupont Kevlar material
- Proprietary compound sleeves for resistance to high heat/abrasion
Accel – Universal Fit 300+ Race Spark Plug Wire Set (Part No.7030)
from
$149.99
For mounting on non-stock applications, for remote location. Choice of 4 core types. Female and male distributor towers. Terminal crimper and anvil tools. Includes silicone lube, boots and terminals. 20 piece kit.
Product Features:
See More
Product Features:
- 150 Ohms Per Foot
- 8.8mm Oversize Silicone Jacket
- Stainless-Steel Spark Plug Terminals
- Suppression of EMI/RFI
- 600-Degree Double Silicone Construction
- Spiral-Wound Copper/Nickel Alloy
MSD Ignition – Wire Set; Super Conductor; Small Block Chevy; Socket Distributor Cap (Part No.31599)
from
$153.99
The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.
Product Features:
See More
Product Features:
- Less than 50 ohms per foot for superior spark
- Ferro-magnetic impregnated core creates an effective EMI choke
- 40 ft. Of Conductor Wound Into A Single Foot Of Wire
- For high EMI suppression
- Conductor core features Dupont Kevlar material
- Proprietary compound sleeves for resistance to high heat/abrasion
MSD Ignition – Wire Set; Super Conductor; Small Block Chevy with L.P. Distributor (Part No.31249)
from
$122.99
The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.
Product Features:
See More
Product Features:
- Less than 50 ohms per foot for superior spark
- Ferro-magnetic impregnated core creates an effective EMI choke
- 40 ft. Of Conductor Wound Into A Single Foot Of Wire
- For high EMI suppression
- Conductor core features Dupont Kevlar material
- Proprietary compound sleeves for resistance to high heat/abrasion
Accel – Universal Fit 300+ Race Spark Plug Wire Set (Part No.7040)
from
$149.99
For mounting on non-stock applications, for remote location. Choice of 4 core types. Female and male distributor towers. Terminal crimper and anvil tools. Includes silicone lube, boots and terminals. 20 piece kit.
Product Features:
See More
Product Features:
- 150 Ohms Per Foot
- 600° F Rated Silicone Jacket
- Stainless Steel Plug Terminals
- Custom-fit Universal And Import Coverage
- Pre And Post HEI Vehicles
- Spiral-Wound Copper/Nickel Alloy
MSD Ignition – Wire Set; Black Super Conductor; 8-cyl. Multi-Angle; Universal (Part No.31193)
from
$153.99
Set includes terminals for engines with early type (socket) and late type (HEI spark plug top) distributor caps. Multi-angle boots and terminals factory installed on one end.
Product Features:
See More
Product Features:
- Extra Long 8.5mm Wires So You Can Cut To Your Designed Length
- Incl. both socket-style and spark plug-style boots and terminals
- Includes Mini-Stripper-Crimper For Factory Style Crimps
- Size Includes: [2]48/50/56 in./[3] 32 in. Wires/Boots/Terminals
- Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
- Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately
Popular 1965 Chevrolet C20 Pickup Ignition Wires Categories
1965 Chevrolet C20 Pickup Ignition Wires
Maybe you’re in the middle of a full rebuild of that 1965 Chevrolet C20 Pickup. Maybe you just need a couple of Ignition Wires. Either way, Advance Auto Parts has 15 different Ignition Wires in our inventory ranging from $44.99 to $153.99. That means you can find the exact parts or products you need to keep that 1965 Chevrolet C20 Pickup running smoothly.
Ignition Wires are only as good as their brand. We stock 3 different brands to make sure you have plenty of trusted parts to choose from for your 1965 Chevrolet C20 Pickup. Accel, MSD Ignition, and Mallory are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Ignition Wires for your 1965 Chevrolet C20 Pickup, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 61 reviews in this category, some of the top rated parts include Wire Set; Super Conductor; Small Block Chevy with L.P. Distributor with 5.0 stars and Wire Set; Street Fire; SBC; Socket Distributor Cap over VC with 2.5 stars.
So if you’re in the market for aftermarket Ignition Wires to keep your 1965 Chevrolet C20 Pickup rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Ignition Wires Brands To Make Your 1965 Chevrolet C20 Pickup Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1965 Chevrolet C20 Pickup demands trusted brand parts and products to keep it running. Many trusted brands of Ignition Wires make up Advance Auto Parts’ inventory, and all are ready to help make your C20 Pickup the best it can be. Be sure to browse some of our top Ignition Wires brands and parts.
Popular Mallory Ignition Wires
We carry Mallory parts in our stock across Optional Spark Plug Wires categories, plus more. For a 1965 Chevrolet C20 Pickup, our most popular Mallory Ignition Wires include:
Top 1965 Chevrolet C20 Pickup Ignition Wires from Accel
Accel products are another trusted brand when it comes to Ignition Wires for your 1965 Chevrolet C20 Pickup. Popular Accel parts include:
from
$44.99
(12)
Universal Fit Super Stock 7mm Copper; Spark Plug Wire Set
Optional Spark Plug Wires
from
$116.99
(9)
Universal Fit Super Stock 8mm Spiral; Spark Plug Wire Set
Optional Spark Plug Wires
FAQs for 1965 Chevrolet C20 Pickup Ignition Wires
What are the most purchased Ignition Wires for the 1965 Chevrolet C20 Pickup?
Out of 15 Ignition Wires for the 1965 Chevrolet C20 Pickup, the most popular in our inventory are:
from
$128.99
This product is not rated
Universal Fit Graphite Suppression; Spark Plug Wire Set
Optional Spark Plug Wires
What are the top-rated 1965 Chevrolet C20 Pickup Ignition Wires?
Top-rated Ignition Wires for your 1965 Chevrolet C20 Pickup based on customer reviews/ratings are:
from
$122.99
(2)
Wire Set; Super Conductor; Small Block Chevy with L.P. Distributor
“1972 c10 -383 stroker picked these up with a huge discount (by my own research) – no brainer for that price. connect from hei to accel plugs.come on m”
from
$61.99
(2)
Wire Set; Street Fire; SBC; Socket Distributor Cap over VC
“I exchanged the set for the correct set at local store.”
from
$122.99
(1)
Wire Set; Black Super Conductor; Small Block Chevy with L.P. Distributor
“Very good product and a great price!”
