1964 Mercury Park Lane Suspension Parts

Essential Suspension Parts for 1964 Mercury Park Lanes

Rare Parts – Control Arm Shaft Kit (Part No.RP15341)

Control Arm Shaft Kit

from

$187.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Heat Treated thread and bushing
  • Torsional rubber bushings
  • Precision thread tolerances
  • Greaseable
See More

Rare Parts – Control Arm Shaft Kit (Part No.RP16711)

Control Arm Shaft Kit

from

$389.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Improves steering response
  • Complete kit for 1 arm
  • Heat treated steel bushings OR torsional rubber bushings
  • Reduces vibration
See More

Monroe – OESpectrum Passenger Car Shock Absorber (Part No.5801)

OESpectrum Passenger Car Shock Absorber

from

$85.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® passenger car shock absorbers provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.

Product Features:
  • REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
  • EXCEPTIONAL HANDLING — Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
  • CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
  • CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
  • IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
  • Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
  • 1/2 inch Diameter Piston Rod: Nitrocarburized rod for long service life. On non-dust shield units only.
  • Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
See More

Monroe – Gas-Matic Passenger Car Shock Absorber (Part No.55801)

Gas-Matic Passenger Car Shock Absorber

from

$55.99
Monroe® Gas-Matic passenger car shock absorber are gas charged and provide improved control at an economical price.

Product Features:
  • Available for import and domestic passenger cars
  • Gas-charged unit
  • Improved handling and control
  • Economical OE replacement
  • Meets OE product specifications
See More

Lakewood – Drag Shock-70/30:Ford/GM/Mopar (Part No.40121)

Drag Shock-70/30:Ford/GM/Mopar

from

$104.99
The best all-round choice for vehicles with leaf or coil springs. Properly loads rear wheels to prevent over-reaction and wheel hop.

Product Features:
  • Excellent Weight Transfer
  • Lets Front End Down Quickly
  • Maximum Traction
  • Makes Vehicle Safer
  • Easier Control At End Of Track
  • Better Overall Stability
See More

Monroe – OESpectrum Passenger Car Shock Absorber (Part No.5826)

OESpectrum Passenger Car Shock Absorber

from

$47.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® passenger car shock absorbers provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.

Product Features:
  • REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
  • EXCEPTIONAL HANDLING — Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
  • CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
  • CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
  • IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
  • Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
  • 1/2 inch Diameter Piston Rod: Nitrocarburized rod for long service life. On non-dust shield units only.
  • Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
See More

Lakewood – Drag Shock-90/10:Ford/GM/Mopar (Part No.40101)

Drag Shock-90/10:Ford/GM/Mopar

from

$99.19
Drag Shock-90/10:Ford/GM/Mopar

Rare Parts – Spring Bolt Kit (Part No.RP35463)

Spring Bolt Kit

from

$34.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Grade 5 or higher bolt/pin
  • No Squeak
  • Reduces vibration
  • Reduces vibration
See More

Rare Parts – Spring Bolt Kit (Part No.RP35306)

Spring Bolt Kit

from

$90.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Grade 5 or higher bolt/pin
  • No Squeak
  • Reduces vibration
  • Reduces vibration
See More

Upgrade your 1964 Mercury Park Lane with Top-Quality Suspension Parts

When it comes to maintaining or upgrading your 1964 Mercury Park Lane, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Mercury or enhancing its overall performance, Suspension Parts are key to keeping your Park Lane functioning at its best. At Advance Auto Parts, we offer a wide selection of 6 Suspension Parts for the 1964 Mercury Park Lane, designed to meet your needs without breaking the bank. From Coil and Leaf Spring replacements to Control Arms upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Suspension Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Suspension Parts for your 1964 Mercury Park Lane at great prices. Our Suspension Parts inventory for this model ranges from just $55.99 to $187.99, with an average price of $104.79. Our 6 Suspension Parts in stock come from 3 trusted brands, so you’re sure to find the right part for your 1964 Mercury Park Lane without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1964 Mercury Park Lane, we stock popular OEM and aftermarket Suspension Parts from top names like Monroe, and more. Monroe Suspension Parts start at just $55.99 and boast an impressive 4 stars average rating from customers. With 81 customer reviews and counting, our 1964 Mercury Park Lane Suspension Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Suspension Part upgrades. Explore related part types like Batteries and Chargers, Fluids and Chemicals and more to make sure your 1964 Mercury Park Lane is always ready to roll. We’re committed to providing you with everything you need to keep your Park Lane in top shape, all in one place. Start shopping confidently below for your 1964 Mercury Park Lane!

Best-Selling Coil and Leaf Springs for 1964 Mercury Park Lanes

Enhance the driving experience in your Mercury with 1 quality Coil and Leaf Spring components, starting at $90.99.

Rare Parts – Spring Bolt Kit (Part No.RP35306)

Spring Bolt Kit

from

$90.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Grade 5 or higher bolt/pin
  • No Squeak
  • Reduces vibration
  • Reduces vibration
See More

Most Popular 1964 Mercury Park Lane Control Arms

Customize your Mercury with 1 Control Arms products like Control Arm Shaft Kits, all priced under $187.99.

Rare Parts – Control Arm Shaft Kit (Part No.RP15341)

Control Arm Shaft Kit

from

$187.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Heat Treated thread and bushing
  • Torsional rubber bushings
  • Precision thread tolerances
  • Greaseable
See More

Top Picks for 1964 Mercury Park Lane Shocks and Struts

Upgrade Mercury Park Lanes with top-quality Shocks and Struts parts, including 4 OEM and aftermarket selections for your 1964 model.

Monroe – OESpectrum Passenger Car Shock Absorber (Part No.5801)

OESpectrum Passenger Car Shock Absorber

from

$85.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® passenger car shock absorbers provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.

Product Features:
  • REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
  • EXCEPTIONAL HANDLING — Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
  • CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
  • CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
  • IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
  • Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
  • 1/2 inch Diameter Piston Rod: Nitrocarburized rod for long service life. On non-dust shield units only.
  • Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
See More

Monroe – Gas-Matic Passenger Car Shock Absorber (Part No.55801)

Gas-Matic Passenger Car Shock Absorber

from

$55.99
Monroe® Gas-Matic passenger car shock absorber are gas charged and provide improved control at an economical price.

Product Features:
  • Available for import and domestic passenger cars
  • Gas-charged unit
  • Improved handling and control
  • Economical OE replacement
  • Meets OE product specifications
See More

Lakewood – Drag Shock-70/30:Ford/GM/Mopar (Part No.40121)

Drag Shock-70/30:Ford/GM/Mopar

from

$104.99
The best all-round choice for vehicles with leaf or coil springs. Properly loads rear wheels to prevent over-reaction and wheel hop.

Product Features:
  • Excellent Weight Transfer
  • Lets Front End Down Quickly
  • Maximum Traction
  • Makes Vehicle Safer
  • Easier Control At End Of Track
  • Better Overall Stability
See More

Lakewood – Drag Shock-90/10:Ford/GM/Mopar (Part No.40101)

Drag Shock-90/10:Ford/GM/Mopar

from

$99.19
Drag Shock-90/10:Ford/GM/Mopar

Top-Rated Suspension Parts Brands For Your 1964 Mercury Park Lane

Shop for the best-rated brands offering Suspension Parts and other products for your 1964 Mercury Park Lanes. Below you’ll find some of our best rated Suspension Parts from Monroe, and more. Suspension Parts from these brands that fit a 1964 Park Lane start at just $55.99 and are rated as high as 4 stars. OEM and aftermarket Suspension Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Monroe 1964 Mercury Park Lane Suspension Parts

When it comes to maintaining or upgrading your 1964 Mercury Park Lane, using quality Suspension Parts is essential to ensure durability and a perfect fit. Monroe ticks all of those boxes. We offer a wide selection of Monroe Suspension Parts, specifically designed for the 1964 Mercury Park Lane. With over 2 Monroe brand Suspension Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $55.99, with an average price of just $70.99. Plus, with over 27 customer reviews and an average rating of 4 stars, you can trust that our Monroe Suspension Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Gas-Matic Passenger Car Shock Absorber
from
$55.99

(16)

Gas-Matic Passenger Car Shock Absorber

“parts got here supper fast !!!!!”

OESpectrum Passenger Car Shock Absorber
from
$85.99

(11)

OESpectrum Passenger Car Shock Absorber

“Lo recomiendo porque es de buena calidad”

FAQs for 1964 Mercury Park Lane Suspension Parts

Which Suspension Parts are best-sellers for 1964 Mercury Park Lanes?

Out of 6 Suspension Parts that fit 1964 Mercury Park Lanes, the following parts are the top sellers:

What’s the price range for 1964 Mercury Park Lane Suspension Parts?

Suspension Part prices for the 1964 Mercury Park Lane start at $55.99 and go up to $187.99 for the most premium parts.

What’s the average price of a Suspension Part for a 1964 Mercury Park Lane?

The average price for Suspension Parts for the 1964 Mercury Park Lane is $104.79. Keep in mind the variety of part types within our Suspension Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Suspension Parts for other Mercury Park Lane model years?

Yes, we currently carry Suspension Parts for 7 model years of Mercury Park Lanes between 1958 and 1968. Suspension Parts are bought most frequently for the following model years: 1968, 1967, 1966, 1965, 1960, 1959, and 1958.

What are the cheapest Suspension Parts for my 1964 Mercury Park Lane?

The cheapest 1964 Mercury Park Lane Suspension Parts we carry in stock are:

What are the top-rated Suspension Parts that fit the 1964 Mercury Park Lane?

Out of 81 reviews by customers, our 1964 Mercury Park Lane Suspension Parts have an average customer rating of . These are some of the highest-rated Suspension Part types for the 1964 Mercury Park Lane and their top-rated products:

What types of Suspension Parts do you sell for my 1964 Mercury Park Lane?

As of 2/5/25, these are some of the most in-demand types of Suspension Parts for a 1964 Mercury Park Lane:

Can I get help with 1964 Mercury Park Lane Suspension Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Mercury Suspension Parts and more.

What is your return policy for Mercury Park Lane Suspension Parts?

Advance Auto Parts keeps returns simple. For new Mercury Park Lane Suspension Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.