1964 Mercury Marauder Performance and Racing Products
Find Your Specific 1964 Mercury Marauder Performance and Racing Products
Below you will find various in-demand Mercury Performance and Racing Products, components and accessories for your 1964 Marauder. Advance Auto Parts has popular Marauder parts like Performance Fuel Systems, Performance Distributors, Performance Engines and more. You’ll also find aftermarket and OEM Performance and Racing Products for other Marauder model years including
1963,
1965,
1966,
1969,
1970,
2003,
2004 and more. Select a category of 1964 Mercury Marauder Performance and Racing Products below and start saving instantly.
Popular 1964 Mercury Marauder Performance and Racing Products Categories
Essential Performance and Racing Products for 1964 Mercury Marauders
Edelbrock – Edelbrock Performer-Plus Camshaft Kit, 2106 (Part No.2106)
from
$392.99
“Edelbrock Performer-Plus Camshaft No: 2106 is designed for 352-428 Ford V8 engines and produce optimum torque from the low-end to the mid-range. Performer-Plus camshafts should be matched with Performer manifolds for vehicles operating from off-idle to 5500 rpm. The Performer-Plus No: 2106 is a smooth idling cam for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you’ll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions. This cam produced 410 Ft Lbs of Torque when paired with Performer 390 intake manifold No: 2105 and stock cylinder heads. Will not work in 427 side-oilers. Camshaft specifications: – Intake duration: 194 Degrees – Exhaust duration: 204 Degrees – Intake lift: .460″” – Exhaust lift: .480″” – Lobe separation: 110 Degree – Intake Center Line: 105 Degree – Vacuum: 16″””
See More
Powertrax – Powertrax Differential Lock Assembly, 9206902800 (Part No.9206902800)
from
$551.99
For vehicles that are driven daily, the Power Trax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Power Trax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Power Trax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Power Trax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds.
See More
Motive Gear – Motive Gear Differential Pinion Bearing Spacer, 4105 (Part No.4105)
from
$22.79
Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
See More
Sniper Motorsports – Sniper Motorsports Sniper 2 Efi – Black, 550-511-3XK (Part No.550-511-3XK)
from
$1899.99
New for Sniper 2 is the optional Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12-volt source is all that’s required from your vehicle to power the PDM and your Sniper EFI.
See More
Edelbrock – Edelbrock Exhaust Manifold Gasket Set for Ford, High heat resistance, 7228 (Part No.7228)
from
$29.99
“A high-density non-asbestos fiber/metal core composite material consisting of two graphite coated, heat resistant fiber blended sheets that are mechanically and chemically fused to an expanded steel core. The finished product provides high heat resistance, excellent load retention and unmatched sealing performance on exhaust manifold and header applications. A 50% recovery rate allows for gasket expansion in the event your header loses the proper header bolt torque. Gasket futures a 1.50″”x 2.10″” port size.”
See More
Lakewood – Lakewood Drag Shock-70/30:Ford/GM/Mopar, 40121 (Part No.40121)
from
$126.99
The best all-round choice for vehicles with leaf or coil springs. Properly loads rear wheels to prevent over-reaction and wheel hop.
See More
Holley – Holley 4150 ALUM DP 750 CFM ELECTRIC CHOKE, 0-4779SAE (Part No.0-4779SAE)
Competition Cams – Competition Cams Xfi Nsr Blower 222/239 Hydraulic Roller Cams For Ford 4.6/5.4L Modular 3 Valve, 127205 (Part No.127205)
from
$1277.00
Mid to upper range cam for bolt-on blowers running higher boost psi. Major power gains above 4900 RPM, compatible with stock springs. Best with 3.73+ gears & 2500 stall. Great idle. Works with stock tune.
See More
Mr. Gasket – Mr. Gasket Ultra Seal: Intake Gasket, 5838 (Part No.5838)
from
$53.29
Ultra-Seal intake manifold gaskets are manufactured from cellulose/nitrile composition gasket material. Provides excellent sealing and durability. Incorporates Silicone beading around each intake and water outlet port to provide additional sealing strength on both sides of each gasket. No gasket sealer required. For OE replacement, high performance street, drag race and oval track use. Includes manifold end seals.
See More
B & M – B & M Automatic Shifter – Megashifter – Light Truck, 80680 (Part No.80680)
from
$561.99
“A taller (14.85″”) MegaShifter tailored for trucks and bench seats, combining positive ratcheting shifts that prevent over-shifting with an NHRA/IHRA-compliant reverse lockout. The package includes a trim-to-fit console, T-handle with accordion boot, 5-ft cable, brackets, levers, and a lighted gear indicator-plus compatibility across popular Chrysler, Ford, and GM 3-/4-speed autos (install kits may be required; see applications). Overall: 14.9″” L x 6.4″” W x 14.8″” H.”
See More
Edelbrock – Edelbrock AVS2 1906 Carburetor: 650 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (Part No.1906)
from
$469.99
“The Edelbrock AVS2 Series #1906 is a satin-finished four-barrel carburetor with electric choke that is designed and calibrated for optimum street performance in engines that require an air-fuel flow of 650 CFM. The AVS2 is a perfect replacement or upgrade that features annular flow primary boosters with a new calibration for improved off-idle and cruising performance. The annular flow booster design delivers improved fuel atomization to eliminate flat spots that may be encountered as the carburetor transitions from idle to full throttle. Each annular flow booster features eight equally spaced orifices to improve fuel metering from idle to the main circuit. The improved flow metering makes this carburetor ideal for use with a wide variety of small- and big-block engines with either dual- or single-plane intake manifolds. The Edelbrock AVS2 #1906 includes both timed and full vacuum ports for ignition advance. It comes with: .101 primary and.098 secondary metering jets; .070 x .037 metering rods; orange (5″” Hg) step-up spring. Use our Carburetor Stud Kits #8008 or #8024 if needed. Match with a variety of manifolds that include Edelbrock Performer, Performer EPS, RPM Air-Gap, Performer RPM, Torker II or other brands of similar design. For a black-finished AVS2 with electric choke, order part #19063.”
See More
Weiand – Weiand High-Rise Dual Plane Intake Manifold for Maximum Torque, 8012 (Part No.8012)
Competition Cams – Competition Cams Big Mutha’ Thumpr 242/257 Hydraulic Flat Cam, 33-602-5 (Part No.33-602-5)
from
$325.99
Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods.
See More
Mr. Gasket – Mr. Gasket Alternator: Remanufactured, 80 Amps, 5124 (Part No.5124)
from
$449.99
“Upgrade your vehicle’s charging system with this remanufactured 80-amp alternator, designed to exceed original equipment specifications for superior reliability. Featuring a Ford 1G small case design, this alternator is compatible with most 1961-’85 Ford vehicles and works seamlessly with OEM-style external regulators. Its chrome-plated finish not only enhances durability but also adds a sleek, polished look under the hood. With a 6.875″” bolt spacing and a 1-groove V-belt pulley included, installation is straightforward and hassle-free. Operating at 12 volts, this alternator delivers consistent performance, making it an ideal replacement for your original unit. Built for dependability and style, its the perfect choice for restoring or upgrading your classic Ford.”
See More
Mallory – Mallory Promaster Classic Series Ignition Coil, 29440 (Part No.29440)
from
$204.99
The Mallory Promaster Classic series ignition coil is designed to meet today’s specialized ignition requirements. This coil features a faster rise time and increased spark duration (compared to stock) to increase performance. It has a glass-filled polyester case and oil-filled construction to ensure a long life and no energy loss from arcing. This coil also offers excellent wire retention with a spark plug type secondary post, and brass contact terminals.
See More
Accel – Accel Contact And Condenser Kit, 8203 (Part No.8203)
from
$92.79
Regain horsepower and economy for your street machine with new contact and condenser kit. Large tungsten contacts provide crisp coil firing and perform solidly up to 5,000 RPM. Condenser’s special winding protects from pitting of point contacts. Heavy duty 23 ounce points.
See More
Accel – Accel Spark Plug Wire Set – 8mm – Yellow with Orange Straight Boots – 4040 8mm universal fit super stock spark plug wire sets feature a spiral core… (Part No.4040)
from
$69.99
ACCEL’s SuperStock 4000 series spark plug wire sets are designed to upgrade an OE ignition system for high-spark delivery levels for street driven applications. The 450 degree F rated silicone jacket is extruded over a tightly woven, rugged fiberglass braid. The braid is applied over high dielectric strength EPDM (Ethylene Propylene Diene Monomer) inner insulation for ignition wire performance that exceeds SAE specifications.
See More
Holley – Holley Mechanical Fuel Pump, 12-460-11 (Part No.12-460-11)
from
$207.99
Mechanical fuel pump made from heavy duty construction for continuous high RPM operation. Fuel body casting can be rotated to accommodate various plumbing situations. Fuel pressure regulator is not required.
See More
MSD Ignition – MSD Ignition Ignition Coils, Ford 4.6L / 5.4L 2-Valve, 1998-2014, 8-Pack, 82428 (Part No.82428)
from
$299.99
MSD offers Blaster Series Ignition coils for late model Ford engines. The housing and installation are the same as the factory, but that’s where the similarity ends. Inside the MSD red housing, engineers spec’d better material to assemble the primary and secondary windings. The Blaster Series Ignition Coil design puts the spark energy right out of the coil and across the plug gap to improve the combustion and output of the engine.
See More
Energy Suspension – Energy Suspension Control Arm Bushing Set, 4.3102G (Part No.4.3102G)
from
$19.49
For both front and rear of suspensions on cars, trucks and SUVs. Made of Energy’s Hyper-Flex performance polyurethane for optimum performance and durability. Maintains proper alignment under extreme conditions on the street, track or off-road. Improves vehicle handling, cornering and overall control. Full floating for smoother, efficient operation. Outlasts and outperforms rubber.
See More
Competition Cams – "Competition Cams SUPER VALVE LOCKS, 3/8"" 1 ST, 612-16" (Part No.612-16)
from
$43.99
Inside tang-to-taper relationship held tightly for repeatable valve spring installed heights
See More
Edelbrock – Edelbrock Engine Gasket Set, 7368 (Part No.7368)
from
$162.99
The Edelbrock No: 7368 head gaskets provide the best sealing solution and are matched to Edelbrock cylinder heads for optimal performance. Edelbrock relies on industry leading head gasket manufactures to ensure our head gasket sets will provide the best fit and sealing properties when used with Edelbrock aluminum cylinder heads. Edelbrock head gaskets are manufactured from high-density materials and feature a superior design that performs under pressure and provides a long-lasting seal, without re-torqueing.
See More
Edelbrock – Edelbrock Sure Seat Valve Springs, 5792 (Part No.5792)
from
$157.99
The Edelbrock No: 5792 Sure Seat Valve Spring for Chrysler 383-400-413-440 V8 1969-79 O.E Cast iron cylinder heads are made of highest quality spring wire and precision wound to close tolerances, our Sure Seat Valve Spring sets are for use on original equipment heads when installing Edelbrock Performer-Plus, Performer RPM and Torker-Plus camshafts. These are the same high-performance springs used on Edelbrock Performer and RPM cylinder heads. For camshaft warranty compliance, use only the springs recommended by Edelbrock for each camshaft application.
See More
Mr. Gasket – Mr. Gasket Performance Valve Cover Gaskets, 278 (Part No.278)
from
$49.99
Mr. Gasket Performance Valve Cover Gaskets are high-density cork/rubber blend gaskets that use evenly sized cork particles distributed evenly throughout the rubber binder. The result is a compressible valve cover gasket without leak paths. These gaskets create a positive seal by controlled swelling of the gasket material when exposed to hot engine oil. Provides excellent flange sealing and durability. For original equipment replacement, high performance street, drag race and oval track use.
See More
Accel – Accel Points Eliminator Kit for Ford Motorcraft Points Distributors, 2020 (Part No.2020)
from
$117.99
Put and end to high maintenance point ignition systes by utilizing a specialized electronic circuitry and infrared signal. Stabalizes ignition timing from 1 to 10,000 RPM. Improves performance and fuel efficiency, easy to install with hand tools, reduces maintenance. It is built with the latest thermal clad based surface mount construction for maximum dependability and long life.
See More
Top Street Performance – Top Street Performance Ford FE Big Block Light Duty V8 (352-428) (330-391) HEI Distributor with Blue Cap, JM6508BL (Part No.JM6508BL)
from
$134.99
TSP HEI Distributor has everything you need, all under one cap. With a high-quality aluminum housing and hardened steel dual bushing construction, it is built to last. It features fully adjustable mechanical and vacuum advances, meaning precision is a breeze. It has a high-output module, high-spark 65,000 volt coil, solid brass terminals, and an easy one-wire hookup.
See More
Top Street Performance – Top Street Performance Ford FE Big Block Light Duty V8 (352-428) (330-391) Pro Series Ready to Run Distributor with Blue Cap, JM7708BL (Part No.JM7708BL)
from
$206.99
TSP Pro Series Ready to Run Distributor is perfect for a street performance upgrade. It features a CNC-machined billet aluminum body and hardened steel shaft, with a sealed ball bearing on top and a sintered steel bushing on the bottom. It also comes with a fully adjustable mechanical advance, vacuum advance, magnetic pickup trigger, and a high-output circuit board module with digital tach output. The dielectric cap comes with solid brass terminals and a color-matched wire retainer.
See More
Holley EFI – Holley EFI EFI Accessories, 565-323 (Part No.565-323)
from
$584.99
HyperSpark distributors are plug and play with all Holley Sniper EFI systems, featuring a high quality billet distributor housing, Hall Effect crank trigger sensor, and they come included with the fool proof patented clear installation cap. All of our HyperSpark distributors are also available in a stylish black housing. We are also expanding our engine support to now include: Tall Deck Chevrolet and 250ci Chevrolet Inline 6 applications.
See More
Upgrade your 1964 Mercury Marauder with Top-Quality Performance and Racing Products
When it comes to maintaining or upgrading your 1964 Mercury Marauder, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Mercury or enhancing its overall performance, Performance and Racing Products are key to keeping your Marauder functioning at its best. At Advance Auto Parts, we offer a wide selection of 131 Performance and Racing Products for the 1964 Mercury Marauder, designed to meet your needs without breaking the bank.
From
Performance Fuel System
replacements to
Performance Distributors
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1964 Mercury Marauder at great prices.
Our Performance and Racing Products inventory for this model
ranges from just $19.49 to $2,249.99, with
an average price of $663.19.
Our 131 Performance and Racing Products in stock come from 18 trusted brands, so you’re sure to find the right part for your 1964 Mercury Marauder without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1964 Mercury Marauder, we stock popular OEM and aftermarket Performance and Racing Products from top names
like Edelbrock, Holley, Accel, and more.
Edelbrock Performance and Racing Products
start at just $450.99 and boast an impressive 4.4 stars average rating from customers.
Holley and Accel also bring quality to the table, with Performance and Racing Products available starting at $49.99, and at an average 4.2 stars rating.
With 374 customer reviews and counting, our 1964 Mercury Marauder Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1964 Mercury Marauder is always ready to roll. We’re committed to providing you with everything you need to keep your Marauder in top shape, all in one place.
Start shopping confidently below for your 1964 Mercury Marauder!
Best-Selling Performance Fuel Systems for 1964 Mercury Marauders
Enhance the driving experience in your Mercury with 61 quality Performance Fuel System components, starting at $249.99.
Edelbrock – Edelbrock Performer 1411 Carburetor: 750 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (Part No.1411)
from
$519.99
“The Edelbrock 1411 Performer Series 750 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1411 Performer Series 750 CFM electric choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to “”hold a tune””, so once it is tuned, the carburetor stay’s tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that’s reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation.”
See More
Edelbrock – Edelbrock AVS2 1906 Carburetor: 650 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (Part No.1906)
from
$469.99
“The Edelbrock AVS2 Series #1906 is a satin-finished four-barrel carburetor with electric choke that is designed and calibrated for optimum street performance in engines that require an air-fuel flow of 650 CFM. The AVS2 is a perfect replacement or upgrade that features annular flow primary boosters with a new calibration for improved off-idle and cruising performance. The annular flow booster design delivers improved fuel atomization to eliminate flat spots that may be encountered as the carburetor transitions from idle to full throttle. Each annular flow booster features eight equally spaced orifices to improve fuel metering from idle to the main circuit. The improved flow metering makes this carburetor ideal for use with a wide variety of small- and big-block engines with either dual- or single-plane intake manifolds. The Edelbrock AVS2 #1906 includes both timed and full vacuum ports for ignition advance. It comes with: .101 primary and.098 secondary metering jets; .070 x .037 metering rods; orange (5″” Hg) step-up spring. Use our Carburetor Stud Kits #8008 or #8024 if needed. Match with a variety of manifolds that include Edelbrock Performer, Performer EPS, RPM Air-Gap, Performer RPM, Torker II or other brands of similar design. For a black-finished AVS2 with electric choke, order part #19063.”
See More
Edelbrock – Edelbrock Performer 1406 Carburetor: 600 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (Part No.1406)
from
$450.99
“The Edelbrock 1406 Performer Series 600 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1406 Performer Series 600 CFM electric choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to “”hold a tune””, so once it is tuned, the carburetor stay’s tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that’s reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation.”
See More
Holley – Holley Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny, 0-80457S (Part No.0-80457S)
from
$499.99
Holley’s new 0-80457SA is constructed from aluminum which compared to its zinc counterpart equates to a weight savings of 40%! Holley’s aluminum 0-80457SA will hold its shine longer and also can be hand polished for a custom look! Its 600 CFM of airflow, vacuum secondaries, and single fuel inlet makes it amazingly universal. Add to that an electric choke and this carb is super easy to use on almost anything. Don’t trust your performance to just anyone, Holley is the only modular carburetor company that has been in business for over 100 years and has powered every NASCAR champion since the 60’s.
See More
Edelbrock – Edelbrock Performer 1405 Carburetor: 600 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (Part No.1405)
from
$414.99
“The Edelbrock 1405 Performer Series 600 CFM manual choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1405 Performer Series 600 CFM manual choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to “”hold a tune””, so once it is tuned, the carburetor stay’s tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that’s reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation.”
See More
Edelbrock – Edelbrock Performer 1407 Carburetor: 750 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (Part No.1407)
from
$474.99
“The Edelbrock 1407 Performer Series 750 CFM manual choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1407 Performer Series 750 CFM manual choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to “”hold a tune””, so once it is tuned, the carburetor stay’s tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that’s reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation.”
See More
Holley – Holley Prem Street Carbs (Avengers), 0-80770 (Part No.0-80770)
from
$699.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.
See More
Holley – Holley Street/Strip Carbs, 0-9776 (Part No.0-9776)
from
$659.99
Replace your old carburetor with original Holley performance 4160 carburetors. Budget-minded enthusiasts, like you, will be rewarded with maximum performance from your stock or mildly-modified engine. These Holley 4160 adjustable float carburetors are easier to tune than full race carburetors with temperamental secondary metering blocks and dual pumps. Plus, they’re available in your choice of universal or direct fit OE replacement versions with all emission provisions. Bolt-on installation and improved performance; no wonder when car guys think of carburetors, they think of Holley 4160 carburetors!
See More
Holley – Holley Street Carburetor: 670 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny, 0-80670 (Part No.0-80670)
from
$699.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.
See More
Holley – Holley Street Carbs, 0-80508S (Part No.0-80508S)
from
$539.99
One of the most widely used Holley carbs of all times -the 0-80508S! Its dual feed fuel inlets assure you get all the fuel you need and its 750 CFM of airflow makes it the perfect performance upgrade carb. Its vacuum secondaries and electric choke make it super easy to use on a wide range of vehicles. Don’t trust your performance to just anyone, Holley is the only modular carburetor company that has been in business for over 100 years and has powered every NASCAR champion since the 60’s.
See More
Edelbrock – Edelbrock Performer Remanufactured Carburetor, 600 CFM With Manual Choke, Satin Finish (Non-EGR), 9905 (Part No.9905)
from
$437.99
“The Edelbrock 9905 Remanufactured Performer Series 600 CFM manual choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 9905 Remanufactured Performer Series 600 CFM manual choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to “”hold a tune””, so once it is tuned, the carburetor stay’s tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that’s reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation.”
See More
Holley – Holley Street Carbs, 0-1850S (Part No.0-1850S)
from
$491.99
The Street HP uses the best features from Holley’s race Bred 4150 HP carbs, but tamed for street and light competition use. The contoured main body from the 4150 HP has a tumble polished shiny finish. The metering system includes a timed spark port for a vacuum advance distributor and is calibrated for a hot street and strip engine setup for outstanding throttle response and drivability. A street HP base plate is used so there are plenty of vacuum ports for power brakes, PCV, etc.
See More
Holley – Holley 2 BBL Carbs, 0-4412S (Part No.0-4412S)
from
$549.99
The 0-4412 is designed as a stock replacement for 2BBL street applications as well as being mandated for some oval track racing sanctioning bodies. Whether you are looking for a replacement carburetor to replace your tired and worn factory 2BBL or one to push you to the finish line on Saturday night, the Holley 0-4412 Performance 2BBL is the perfect choice.
See More
Edelbrock – Edelbrock Performer 1413 Carburetor: 800 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (Part No.1413)
from
$590.99
“The Edelbrock 1413 Performer Series 800 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1413 Performer Series 800 CFM electric choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to “”hold a tune””, so once it is tuned, the carburetor stay’s tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that’s reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation. Dyno tests proved that the EPS 800 carb outperformed a Holley #3310 carb out-of-the-box by 26 ft-lbs. of torque and 22 hp on a small-block Chevy engine equipped with an Edelbrock Performer RPM power package.”
See More
Holley – Holley Prem Street Carbs (Avengers), 0-81670 (Part No.0-81670)
from
$687.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.
See More
Holley – Holley Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny, 0-80458SA (Part No.0-80458SA)
from
$528.99
The Street HP uses the best features from Holley’s race Bred 4150 HP carbs, but tamed for street and light competition use. The contoured main body from the 4150 HP has a tumble polished shiny finish. The metering system includes a timed spark port for a vacuum advance distributor and is calibrated for a hot street and strip engine setup for outstanding throttle response and drivability. A street HP base plate is used so there are plenty of vacuum ports for power brakes, PCV, etc.
See More
Sniper Motorsports – Sniper Motorsports Sniper 2 Efi – Black, 550-511-5XR (Part No.550-511-5XR)
from
$2249.99
The 1 EFI conversion system just got better! Introducing Sniper 2 EFI – a self-tuning, easy-to-install, EFI conversion for common 4-barrel (4150 flange) style carburetors. We took everything that we learned from the original Sniper EFI system and added 14 new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more.
See More
Sniper Motorsports – Sniper Motorsports Sniper Efi Super Sniper Stealth 1250 – Black, 550-877 (Part No.550-877)
from
$2249.99
If you’re looking to make some big power, the Super Sniper Stealth is made for you! Holley’s Sniper EFI Super Sniper Stealth 1250 is the best way to convert your carbureted engine to fuel injection with just 4 simple connections required. Super Sniper can support up to 1250HP boosted with 8 100 LB/HR Injectors. With a Stealth 1250 system, you get that carburetor styling but the functionality of a Sniper! This 4-barrel system features a single pattern bolt on design built to fit 4150 flange manifolds. The Super Sniper Stealth ECU is capable of fuel map self-learning and ignition timing control, improving idle stability, drivability, and wide-open throttle horsepower. Additionally, this Sniper kit also includes transmission kick down provisions for GM TH350/400, 200R4/700R4, and Ford C4/C6 applications!.
See More
Sniper Motorsports – Sniper Motorsports Sniper 2 Efi – Shiny, 550-510-5XR (Part No.550-510-5XR)
from
$2249.99
If you’re looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI.
See More
Sniper Motorsports – Sniper Motorsports Sniper 2 Efi – Black, 550-511-3XR (Part No.550-511-3XR)
from
$2099.99
Make your classic drive like a modern fuel-injected vehicle, including easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley’s comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine and the system will begin self-tuning with no laptop or tuning experience required.
See More
Sniper Motorsports – Sniper Motorsports Sniper 2 Efi – Shiny, 550-510-3XR (Part No.550-510-3XR)
from
$2099.99
If you’re looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI.
See More
Sniper Motorsports – Sniper Motorsports Sniper 2 Efi – Shiny, 550-510-5XK (Part No.550-510-5XK)
from
$2049.99
If you’re looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI.
See More
Sniper Motorsports – Sniper Motorsports Sniper 2 Efi – Black, 550-511-BXR (Part No.550-511-BXR)
from
$1999.99
Make your classic drive like a modern fuel-injected vehicle, including easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley’s comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine and the system will begin self-tuning with no laptop or tuning experience required.
See More
Sniper Motorsports – Sniper Motorsports Sniper 2 Efi – Shiny, 550-510-BXR (Part No.550-510-BXR)
from
$1999.99
If you’re looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI.
See More
Most Popular 1964 Mercury Marauder Performance Distributors
Customize your Mercury with 4 Performance Distributors products
like Performance Distributors, all
priced under $584.99.
Holley EFI – Holley EFI EFI Accessories, 565-323 (Part No.565-323)
from
$584.99
HyperSpark distributors are plug and play with all Holley Sniper EFI systems, featuring a high quality billet distributor housing, Hall Effect crank trigger sensor, and they come included with the fool proof patented clear installation cap. All of our HyperSpark distributors are also available in a stylish black housing. We are also expanding our engine support to now include: Tall Deck Chevrolet and 250ci Chevrolet Inline 6 applications.
See More
Holley EFI – Holley EFI EFI Accessories, 565-323BK (Part No.565-323BK)
from
$584.99
HyperSpark distributors are plug and play with all Holley Sniper EFI systems, featuring a high quality billet distributor housing, Hall Effect crank trigger sensor, and they come included with the fool proof patented clear installation cap. All of our HyperSpark distributors are also available in a stylish black housing. We are also expanding our engine support to now include: Tall Deck Chevrolet and 250ci Chevrolet Inline 6 applications.
See More
Top Street Performance – Top Street Performance Ford FE Big Block Light Duty V8 (352-428) (330-391) Pro Series Ready to Run Distributor with Blue Cap, JM7708BL (Part No.JM7708BL)
from
$206.99
TSP Pro Series Ready to Run Distributor is perfect for a street performance upgrade. It features a CNC-machined billet aluminum body and hardened steel shaft, with a sealed ball bearing on top and a sintered steel bushing on the bottom. It also comes with a fully adjustable mechanical advance, vacuum advance, magnetic pickup trigger, and a high-output circuit board module with digital tach output. The dielectric cap comes with solid brass terminals and a color-matched wire retainer.
See More
Top Street Performance – Top Street Performance Ford FE Big Block Light Duty V8 (352-428) (330-391) HEI Distributor with Blue Cap, JM6508BL (Part No.JM6508BL)
from
$134.99
TSP HEI Distributor has everything you need, all under one cap. With a high-quality aluminum housing and hardened steel dual bushing construction, it is built to last. It features fully adjustable mechanical and vacuum advances, meaning precision is a breeze. It has a high-output module, high-spark 65,000 volt coil, solid brass terminals, and an easy one-wire hookup.
See More
Top Picks for 1964 Mercury Marauder Performance Engines
Upgrade Mercury Marauders with top-quality Performance Engines parts, including 22 OEM and aftermarket selections for your 1964 model.
Edelbrock – Edelbrock Performer 390 Intake Manifold for Ford FE, Satin Finish, 2105 (Part No.2105)
Edelbrock – Edelbrock Performer-Plus Camshaft Kit, 2106 (Part No.2106)
from
$392.99
“Edelbrock Performer-Plus Camshaft No: 2106 is designed for 352-428 Ford V8 engines and produce optimum torque from the low-end to the mid-range. Performer-Plus camshafts should be matched with Performer manifolds for vehicles operating from off-idle to 5500 rpm. The Performer-Plus No: 2106 is a smooth idling cam for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you’ll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions. This cam produced 410 Ft Lbs of Torque when paired with Performer 390 intake manifold No: 2105 and stock cylinder heads. Will not work in 427 side-oilers. Camshaft specifications: – Intake duration: 194 Degrees – Exhaust duration: 204 Degrees – Intake lift: .460″” – Exhaust lift: .480″” – Lobe separation: 110 Degree – Intake Center Line: 105 Degree – Vacuum: 16″””
See More
FEL-PRO Performance – FEL-PRO Performance Performance Cylinder Head Gasket, 1020 (Part No.1020)
from
$39.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions!
See More
Competition Cams – "Competition Cams SUPER VALVE LOCKS, 3/8"" 1 ST, 612-16" (Part No.612-16)
from
$43.99
Inside tang-to-taper relationship held tightly for repeatable valve spring installed heights
See More
FEL-PRO Performance – FEL-PRO Performance PERFORMANCE INTAKE MANIFOLD GASKET SET, 1246 (Part No.1246)
from
$39.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
See More
Competition Cams – Competition Cams High Energy 206/206 Hydraulic Flat Cam K-Kit, K33-221-3 (Part No.K33-221-3)
from
$592.99
Ideal for use with mainly stock components like rocker arms, intake manifolds, cylinder heads, compression ratio, torque converters and rear gear ratios, the High Energy camshaft grind family is a great choice for street performance applications.
See More
Competition Cams – Competition Cams Magnum 224/224 Hydraulic Flat Cam and Lifter Kit, CL33-226-4 (Part No.CL33-226-4)
from
$451.99
An older member of the COMP Cams grind family, the Magnum series of camshafts offers excellent performance gains over stock without the added wear and tear associated with more aggressive camshafts.
See More
Competition Cams – Competition Cams Xtreme Energy 212/218 Hydraulic Flat Cam and Lifter Kit, CL33-234-4 (Part No.CL33-234-4)
from
$397.99
Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts.
See More
Competition Cams – Competition Cams High Energy 218/218 Hydraulic Flat Cam and Lifter Kit, CL33-224-3 (Part No.CL33-224-3)
from
$386.99
FE FORD HYDRAULIC CAM AND LIFTER KIT – High Energy: Good upgrade for factory performance cams in 390-428. Noticeable idle.
See More
Competition Cams – Competition Cams Big Mutha’ Thumpr 242/257 Hydraulic Flat Cam, 33-602-5 (Part No.33-602-5)
from
$325.99
Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods.
See More
Competition Cams – Competition Cams Magnum 2230/230 Hydraulic Flat Cam, 33-230-4 (Part No.33-230-4)
from
$309.99
An older member of the COMP Cams grind family, the Magnum series of camshafts offers excellent performance gains over stock without the added wear and tear associated with more aggressive camshafts.
See More
Competition Cams – Competition Cams Xtreme Energy 230/236 Hydraulic Flat Cam, 33-248-4 (Part No.33-248-4)
from
$309.99
Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts,
See More
Competition Cams – Competition Cams Magnum 244/244 Hydraulic Flat Cam, 33-240-4 (Part No.33-240-4)
from
$309.99
An older member of the COMP Cams grind family, the Magnum series of camshafts offers excellent performance gains over stock without the added wear and tear associated with more aggressive camshafts.
See More
Competition Cams – Competition Cams Magnum 224/224 Hydraulic Flat Cam, 33-226-4 (Part No.33-226-4)
from
$309.99
An older member of the COMP Cams grind family, the Magnum series of camshafts offers excellent performance gains over stock without the added wear and tear associated with more aggressive camshafts.
See More
Competition Cams – Competition Cams Xtreme Energy 212/218 Hydraulic Flat Cam, 33-234-4 (Part No.33-234-4)
from
$309.99
Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts,
See More
Competition Cams – Competition Cams Magnum 253/253 Hydraulic Flat Cam, 33-241-4 (Part No.33-241-4)
from
$309.99
An older member of the COMP Cams grind family, the Magnum series of camshafts offers excellent performance gains over stock without the added wear and tear associated with more aggressive camshafts.
See More
Competition Cams – Competition Cams High Energy 218/218 Hydraulic Flat Cam, 33-224-3 (Part No.33-224-3)
from
$297.99
HYDRAULIC – High Energy: Good upgrade for factory performance cams in 390-428. Noticeable idle.
See More
Competition Cams – Competition Cams High Energy 212/212 Hydraulic Flat Cam, 33-222-3 (Part No.33-222-3)
from
$297.99
Ideal for use with mainly stock components like rocker arms, intake manifolds, cylinder heads, compression ratio, torque converters and rear gear ratios, the High Energy camshaft grind family is a great choice for street performance applications.
See More
Edelbrock – Edelbrock Engine Gasket Set, 7368 (Part No.7368)
from
$162.99
The Edelbrock No: 7368 head gaskets provide the best sealing solution and are matched to Edelbrock cylinder heads for optimal performance. Edelbrock relies on industry leading head gasket manufactures to ensure our head gasket sets will provide the best fit and sealing properties when used with Edelbrock aluminum cylinder heads. Edelbrock head gaskets are manufactured from high-density materials and feature a superior design that performs under pressure and provides a long-lasting seal, without re-torqueing.
See More
Edelbrock – Edelbrock Sure Seat Valve Springs, 5792 (Part No.5792)
from
$157.99
The Edelbrock No: 5792 Sure Seat Valve Spring for Chrysler 383-400-413-440 V8 1969-79 O.E Cast iron cylinder heads are made of highest quality spring wire and precision wound to close tolerances, our Sure Seat Valve Spring sets are for use on original equipment heads when installing Edelbrock Performer-Plus, Performer RPM and Torker-Plus camshafts. These are the same high-performance springs used on Edelbrock Performer and RPM cylinder heads. For camshaft warranty compliance, use only the springs recommended by Edelbrock for each camshaft application.
See More
Mr. Gasket – Mr. Gasket Performance Valve Cover Gaskets, 275 (Part No.275)
from
$51.99
Mr. Gasket Performance Valve Cover Gaskets are high-density cork/rubber blend gaskets that use evenly sized cork particles distributed evenly throughout the rubber binder. The result is a compressible valve cover gasket without leak paths. These gaskets create a positive seal by controlled swelling of the gasket material when exposed to hot engine oil. Provides excellent flange sealing and durability. For original equipment replacement, high performance street, drag race and oval track use.
See More
Edelbrock – Edelbrock Valve Cover Gasket Set for Ford, Excellent Sealing Inegrity & Easy Installation, 7568 (Part No.7568)
from
$43.99
The Edelbrock valve cover gaskets No: 7568 provide excellent sealing integrity and conformability for easy installation. The multi-layer construction has two highly compressible, high rubber content, fiber-reinforced outside layers which are chemically bonded to a high strength composite core. This unique core-reinforced construction has a radial strength to resist high-vacuum or blow-out conditions. Edelbrock valve cover gaskets are an Edelbrock product.
See More
In-Demand Performance Ignition Products for 1964 Mercury Marauders
Select from 13 premium Performance Ignition Products parts for your 1964 Mercury Marauder, with prices ranging from $35.49 to $204.99.
Mallory – Mallory Unilite Ignition Module, 605 (Part No.605)
from
$99.99
Requires a 1.4 ohms Ballast resistor, Loom resistor or internally resisted coil.
See More
Accel – Accel Contact And Condenser Kit, 8203 (Part No.8203)
from
$92.79
Regain horsepower and economy for your street machine with new contact and condenser kit. Large tungsten contacts provide crisp coil firing and perform solidly up to 5,000 RPM. Condenser’s special winding protects from pitting of point contacts. Heavy duty 23 ounce points.
See More
Accel – Accel Ignition Coil – Yellow – 42000v 1.4 ohm primary – Points – up to 6500 RPM – The 8140 super stock ignition coil is a canister style coil that … (Part No.8140)
from
$49.99
Excellent high performance replacement for import and domestic vehicles with canister type oil filled coil. Re-engineered windings for even higher energy output resulting in quicker starting improved throttle response and more high RPM power. Designed to work with Points style and Breakerless electronic ignition systems. Heavy duty black Alkyd tower provides in flashover in protection to primary terminals. ACCEL Yellow can. 42000 volts effective up to 6500 RPM 1.4 ohms on the primary.
See More
Accel – Accel Spark Plug Wire Set – 8mm – Universal – Red Wire with Red Straight Boots – 5040R 8mm super stock universal fit spark plug wires feature a spi… (Part No.5040R)
from
$116.99
The traditional ACCEL combination of yellow wire and red spark plug boots has been added to these SuperStock Spiral Core 5000 Series wire sets, which feature color-matched wire and spark plug boots in blue, black, and red. With only 500 ohms/ft. of resistance, more ignition energy can reach the spark plug, producing a longer-lasting, hotter spark flame kernel. The results is higher performance through improved efficiency, quicker throttle response, and reduced emissions. This 8mm wire’s double silicone construction is rated to 550 degrees F. The high-gloss wire jacket resists moisture, chemicals, and heat extremes for longer life and great looks. The fiberglass braid adds greater pull strength and terminal retention, while the stainless steel spark plug terminals provide excellent long life, electrical conductivity, and corrosion resistance. Both universal and custom-fit applications are available for early and late model cars and trucks.
See More
Accel – Accel Ignition Coil – Chrome – 42000v 1.4 ohm primary – Points – up to 6500 RPM – 8140C superstock ignition coil is a chrome canister style high pe… (Part No.8140C)
from
$55.19
Excellent high performance replacement for import and domestic vehicles with canister type oil filled coil. Re-engineered windings for even higher energy output resulting in quicker starting improved throttle response and more high RPM power. Designed to work with Points style and Breakerless electronic ignition systems. Heavy duty black Alkyd tower provides in flashover in protection to primary terminals. ACCEL Yellow can. 42000 volts effective up to 6500 RPM 1.4 ohms on the primary.
See More
Accel – Accel Spark Plug Wire Set – 8mm – Universal – Black Wire with Black Straight Boots – 5040K, Spark Plug Wires, Super Stock, Spiral Core, 8mm, Black,… (Part No.5040K)
from
$103.99
The traditional ACCEL combination of yellow wire and red spark plug boots has been added to these SuperStock Spiral Core 5000 Series wire sets, which feature color-matched wire and spark plug boots in blue, black, and red. With only 500 ohms/ft. of resistance, more ignition energy can reach the spark plug, producing a longer-lasting, hotter spark flame kernel. The results is higher performance through improved efficiency, quicker throttle response, and reduced emissions. This 8mm wire’s double silicone construction is rated to 550 degrees F. The high-gloss wire jacket resists moisture, chemicals, and heat extremes for longer life and great looks. The fiberglass braid adds greater pull strength and terminal retention, while the stainless steel spark plug terminals provide excellent long life, electrical conductivity, and corrosion resistance. Both universal and custom-fit applications are available for early and late model cars and trucks.
See More
Accel – Accel Spark Plug Wire Set – 8mm – Yellow with Orange Straight Boots – 4040 8mm universal fit super stock spark plug wire sets feature a spiral core… (Part No.4040)
from
$69.99
ACCEL’s SuperStock 4000 series spark plug wire sets are designed to upgrade an OE ignition system for high-spark delivery levels for street driven applications. The 450 degree F rated silicone jacket is extruded over a tightly woven, rugged fiberglass braid. The braid is applied over high dielectric strength EPDM (Ethylene Propylene Diene Monomer) inner insulation for ignition wire performance that exceeds SAE specifications.
See More
PerTronix – PerTronix 808415 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 115 Degree Red (Part No.808415)
from
$91.99
Most modern electronic ignition systems require suppression style wires to preserve sensitive components. Flame-Thrower 8mm Custom fit MAGx2 wires provide enhanced RFI suppression and dual current paths for more power delivered to the spark plug. Our custom wire sets have factory terminated ends for a superior connection and perfect fit, without cutting, crimping and splicing.
See More
Accel – Accel Points Eliminator Kit for Ford Motorcraft Points Distributors, 2020 (Part No.2020)
from
$117.99
Put and end to high maintenance point ignition systes by utilizing a specialized electronic circuitry and infrared signal. Stabalizes ignition timing from 1 to 10,000 RPM. Improves performance and fuel efficiency, easy to install with hand tools, reduces maintenance. It is built with the latest thermal clad based surface mount construction for maximum dependability and long life.
See More
Accel – Accel Ignition Coil – SuperStock – Breakerless Electronic Coil – Chrome – This chrome Super Coil is effective up to 6500 RPM, maximum voltage 45,00… (Part No.8145C)
from
$84.29
“Excellent high performance coil for vehicles that have been converted from points to a breakerless electronic distributor or electronic ignition system, where a canister type oil filled can coil is preferred. Designed with optimized low resistance, high turns ratio windings to work specifically with ACCEL 41, 51, 52, 61 & 71000 Series breakerless electronic replacement distributors. Engineered for higher energy output resulting in quicker starting, improved throttle response and more high RPM power. Special crimped and soldered internal connections ensure positive contacts. High performance tan Alkyd tower provides “”flashover”” protection to primary terminals. Available in “”ACCEL Yellow”” or Chrome Plated can.”
See More
Accel – Accel Spark Plug Wire Set – 8.8mm-300+ Ferro-Spiral Race – Universal- Vari-Angle Boots – 7040 300+ race wire universal spark plug wire sets have a … (Part No.7040)
from
$187.99
The oversized 8.8mm wire features a double silicone construction rated at over 600 F and 60kV. High gloss black silicone wire jacket not only looks great, but resists heat extremes, petrochemicals, ozone and moisture better than so-called blended materials for greater durability and longer life. High-density, high-temperature silicone insulation provides greater dielectric strength and eliminates arcing and the effects of corona better than typical OE style rubber materials. All-Kevlar stranded inner core and fiberglass braiding add greater pull strength and terminal retention. Stainless steel and brass terminals provide unsurpassed electrical conductivity and excellent corrosion resistance compared to terminals made of common or plated metals.
See More
Mallory – Mallory Distributor Wiring Harness, 29349 (Part No.29349)
from
$35.49
3-wire for ignition box. PERFORMANCE PARTS>PERFORMANCE IGNITION/STARTING/CHARGING>IGNITION>IGNITION ACCESSORIES & OTHER from Mallory
See More
Mallory – Mallory Promaster Classic Series Ignition Coil, 29440 (Part No.29440)
from
$204.99
The Mallory Promaster Classic series ignition coil is designed to meet today’s specialized ignition requirements. This coil features a faster rise time and increased spark duration (compared to stock) to increase performance. It has a glass-filled polyester case and oil-filled construction to ensure a long life and no energy loss from arcing. This coil also offers excellent wire retention with a spark plug type secondary post, and brass contact terminals.
See More
Most Sold 1964 Mercury Marauder Performance Exhaust Products
Explore our best-selling Mercury parts for the 1964 Marauder among 1 OEM and aftermarket options starting from $33.99.
FEL-PRO Performance – FEL-PRO Performance PERFORMANCE EXHAUST MANIFOLD GASKET SET, 1442 (Part No.1442)
from
$33.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
See More
Top-Rated Performance and Racing Products Brands For Your 1964 Mercury Marauder
Shop for the best-rated brands offering Performance and Racing Products and other products for your 1964 Mercury Marauders. Below you’ll find some of our best rated Performance and Racing Products from Edelbrock, Holley, and Accel, and more. Performance and Racing Products from these brands that fit a 1964 Marauder start at just $49.99 and are rated as high as 4.4 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.
Popular Edelbrock 1964 Mercury Marauder Performance and Racing Products
When it comes to maintaining or upgrading your 1964 Mercury Marauder, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. Edelbrock ticks all of those boxes. We offer a wide selection of Edelbrock Performance and Racing Products, specifically designed for the 1964 Mercury Marauder. With over 3 Edelbrock brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $450.99, with an average price of just $480.32. Plus, with over 68 customer reviews and an average rating of 4.4 stars, you can trust that our Edelbrock Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$519.99
(3)
Edelbrock Performer 1411 Carburetor: 750 CFM, 4 Barrel, Square Bore, Electric Choke Inlet
“i put this carb on my dump truck and i couldn’t be more pleased. my truck runs great and has better mpg and increased power”
from
$469.99
(10)
Edelbrock AVS2 1906 Carburetor: 650 CFM, 4 Barrel, Square Bore, Electric Choke Inlet
“Dropped on an 84 Chevy k20. Runs like a top.”
from
$450.99
(55)
Edelbrock Performer 1406 Carburetor: 600 CFM, 4 Barrel, Square Bore, Electric Choke Inlet
“I love the product, great performance and a awesome chrome look!”
Popular Holley 1964 Mercury Marauder Performance and Racing Products
Holley auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1964 Mercury Marauder owner should feel confident when installing genuine Holley parts in their vehicle. To ensure the best fit and performance for your 1964 Marauder, Advance Auto Parts carries a full inventory of 3 Holley Performance and Racing Products. Plus you will be keeping your Mercury in peak condition while saving money because prices on these Holley Performance and Racing Products range from $499.99 to $699.99, plus, with more than 49 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.
from
$499.99
(45)
Holley Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny, 0-80457S
“Very satisfied”
from
$659.99
(2)
Holley Street/Strip Carbs, 0-9776
“REPLACED EXHISTING HOLLEY CARB,LIKE THE PRODUCT LOOKS GOOD ON ENGINE, POLISHED ,EXCELLENT CARBS USED ON OTHER PROJECTS”
from
$699.99
(2)
Holley Prem Street Carbs (Avengers), 0-80770
“This was the carb that my engine builder suggested.”
FAQs for 1964 Mercury Marauder Performance and Racing Products
Which Performance and Racing Products are best-sellers for 1964 Mercury Marauders?
Out of 131 Performance and Racing Products that fit 1964 Mercury Marauders, the following parts are the top sellers:
- Edelbrock AVS2 1906 Carburetor: 650 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (11920262) – $469.99
- Edelbrock Performer 1406 Carburetor: 600 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (5020646) – $450.99
- Holley Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny, 0-80457S (6340008) – $499.99
What’s the price range for 1964 Mercury Marauder Performance and Racing Products?
Performance and Racing Product prices for the 1964 Mercury Marauder start at $19.49 and go up to $2,249.99 for the most premium parts.
What’s the average price of a Performance and Racing Product for a 1964 Mercury Marauder?
The average price for Performance and Racing Products for the 1964 Mercury Marauder is $663.19. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Performance and Racing Products for other Mercury Marauder model years?
What are the cheapest Performance and Racing Products for my 1964 Mercury Marauder?
The cheapest 1964 Mercury Marauder Performance and Racing Products we carry in stock are:
- Energy Suspension Control Arm Bushing Set, 4.3102G (22908024) – $19.49
- Motive Gear Differential Pinion Bearing Spacer, 4105 (19640050) – $22.79
- FEL-PRO Performance PERFORMANCE EXHAUST MANIFOLD GASKET SET, 1442 (19781781) – $33.99
- Mallory Distributor Wiring Harness, 29349 (17350080) – $35.49
- FEL-PRO Performance PERFORMANCE INTAKE MANIFOLD GASKET SET, 1246 (19781813) – $39.99
What are the top-rated Performance and Racing Products that fit the 1964 Mercury Marauder?
Out of 374 reviews by customers, our 1964 Mercury Marauder Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1964 Mercury Marauder and their top-rated products:
- Performance Shifters
- B & M Automatic Shifter – Megashifter – Universal, 80690 (6900895) – $549.99
- B & M Automatic Shifter – Unimatic – Universal, 80775 (6121233) – $299.99
What types of Performance and Racing Products do you sell for my 1964 Mercury Marauder?
As of 8/2/26, these are some of the most in-demand types of Performance and Racing Products for a 1964 Mercury Marauder:
Can I get help with 1964 Mercury Marauder Performance and Racing Product orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Mercury Performance and Racing Products and more.
What is your return policy for Mercury Marauder Performance and Racing Products?
Advance Auto Parts keeps returns simple. For new Mercury Marauder Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
