1964 Ford GT40 Performance Engines

Name: Performer Small-Block Ford 1.90" Cylinder Head Hydraulic Flat Tappet
Brand: Edelbrock
SKU: 60329
Price: 1035.99 USD

Find your specific 1964 Ford GT40 original or aftermarket Performance Engines below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.

Essential 1964 Ford GT40 Performance Engines

from

$1035.99

50 state street legal aluminum cylinder head. Out-of-the-box bolt-on performance. Intake valves are used for stock pistons.

Product Features:

50-State Street Legal Aluminum Cylinder Head
Out-of-the-Box Bolt-On Performance
Intake Valves Are For Use w/Stock Pistons

from

$67.99

Product Features:

Solid Bushing Chain Resists Stretching
For Use with Stock or Edelbrock Camshafts
Stressproof Steel Crank Gears
3 Keyway Setting Points To Ensure Accurate Timing
True Bearing Surface Rolls with the Sprockets
For Engine with One-Piece Fuel Pump Eccentric

from

$25.49

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Die cut silicone rubber gaskets conform to out-of-flat covers
Great for on-again/off-again situations
Not intended for use in emission controlled vehicles.

from

$40.99

Product Features:

Valve Cover Gasket

from

$27.49

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Blue Stripe performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
Not intended for use in emission controlled vehicles.

from

$100.99

Product Features:

Use W/ Valve Springs Part #5822, 5882, 5896, 5872, 5867, 5812, 5857
Set of 16
1.50 in. Outside Diameter
Steel Material
Black Oxide Finish

from

$51.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$41.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
Raises combustion sealing force to roughly three times that of standard head gaskets.
Steel wire rings for the greatest combustion seal strength.
Not intended for use in emission controlled vehicles.

from

$208.99

Edelbrock part #9655 Pushrods are designed for small-block Ford 289-302 V-8 engine applications. These one-piece pushrods are manufactured from high quality 4130 Chromoly steel tubing that has been surface hardened for maximum durability. They have precis

Product Features:

6.4 in. Length
0.312 in. Diameter
4130 Chromoly Steel Material
Black Oxide Finish
Made In The USA

from

$75.99

High Energy Pushrods from COMP Cams are an affordable, high quality solution when building street rods, RVs and daily drivers. High Energy Pushrods have a durable one-piece construction that meets or exceeds all OE pushrod specifications and fit perfectly with High Energy and Magnum Rocker Arms.

Product Features:

5/16″ diameter, 6.881″ length for Small Block Ford 255 and 302, ’65-up with Flat Tappet Cam
Best choice when building street rods, RVs or daily drivers
Meet or exceed all OE pushrod specifications
Mate perfectly with High Energy and Magnum Rockers
Durable one-piece construction

from

$28.99

Product Features:

Clean Positive Seal
Embossed Silicone Bead Surrounding The Port
Matched To Manifolds And Cylinder Heads

from

$33.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

from

$39.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Fel-Pro performance intake manifold gaskets have been tested with virtually all aftermarket cylinder head and intake manifold combinations.
Performance intake manifold gaskets designed without a metal core, to allow engine builders to trim the gasket for exact fit on modified ports.
Standard and Low riser
Printoseal elastomeric sealing beads to provide extra sealing strength around the intake port.
Not intended for use in emission controlled vehicles.

from

$597.99

Product Features:

For Idle to 5500 RPM Street-Driven Performance
Dual-Plane Low-Rise Intake w/180 deg. Firing Order
Patented Runner Design Ensures Broad Torque Curve
Excellent Throttle Response and Mid-Range Power
50-State Street Legal if Correct Carburetor Used

from

$299.99

Product Features:

For Idle to 5500 RPM Street-Driven Performance
Dual-Plane Low-Rise Intake w/180 deg. Firing Order
Patented Runner Design Ensures Broad Torque Curve
Excellent Throttle Response and Mid-Range Power
50-State Street Legal
Available in Multiple Finishes

from

$27.49

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
With steel core to provide ultimate excellent blowout resistance.
Not intended for use in emission controlled vehicles.

from

$111.99

Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks black oxide coated. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

Product Features:

For Use With Cast Iron Heads
Springs Made of Highest Quality Spring Wire
Springs Precision Wound To Close Tolerances
Use with Original Equipment Heads Only

from

$54.99

Springs made of highest quality spring wire. Springs precision wound to close tolerances. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

Product Features:

For Use With Cast Iron Heads
Springs Made of Highest Quality Spring Wire
Springs Precision Wound To Close Tolerances
Use with Original Equipment Heads Only

from

$141.99

Product Features:

Non-Rotator Type
1.550 in. Outer Diameter
.190 Wire Size
Single Coil Spring Type
Set of 16

Popular 1964 Ford GT40 Performance Engines Categories

Performance Intake Manifolds

Performance Engine Cylinder Head Gaskets

Performance Engine Intake Manifold Gaskets

Performance Engine Timing Sets and Components

Performance Engine Valve Springs

Performance Engine Valve Cover Gasket Sets

Performance Engine Oil Pan Gaskets

Performance Engine Push Rods

Performance Engine Cylinder Heads

Performance Engine Valve Spring Retainer

Maybe you’re in the middle of a full rebuild of that 1964 Ford GT40. Maybe you just need a couple of Performance Engines. Either way, Advance Auto Parts has 20 different Performance Engines in our inventory ranging from $25.49 to $1,035.99. That means you can find the exact parts or products you need to keep that 1964 Ford GT40 running smoothly.

Performance Engines are only as good as their brand. We stock 3 different brands to make sure you have plenty of trusted parts to choose from for your 1964 Ford GT40. FEL-PRO Performance, Edelbrock, and Competition Cams are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Performance Engines for your 1964 Ford GT40, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 11 reviews in this category, some of the top rated parts include Performer 390 Intake Manifold for Ford FE, Satin Finish with 4.0 stars and Sure Seat Valve Springs for Ford 429/460 V8 1969-1987 with 1.0 stars.

So if you’re in the market for aftermarket Performance Engines to keep your 1964 Ford GT40 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Performance Engines Brands To Make Your 1964 Ford GT40 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1964 Ford GT40 demands trusted brand parts and products to keep it running. Many trusted brands of Performance Engines make up Advance Auto Parts’ inventory, and all are ready to help make your GT40 the best it can be. Be sure to browse some of our top Performance Engines brands and parts.

Popular FEL-PRO Performance Performance Engines

We carry FEL-PRO Performance parts in our stock across Performance Engine Intake Manifold Gaskets and Performance Engine Valve Cover Gasket Sets categories, plus more. For a 1964 Ford GT40, our most popular FEL-PRO Performance Performance Engines include:

from $33.99

(4)

Lower Intake Manifold Gasket Set: 11 Piece Set

Performance Engine Intake Manifold Gaskets

from $46.99

(1)

Engine Valve Cover Gasket Set

Performance Engine Valve Cover Gasket Sets

from $51.99

(2)

Cylinder Head Gasket: Steel Core Composite, Without Head Bolts

Performance Engine Cylinder Head Gaskets

Top 1964 Ford GT40 Performance Engines from FEL-PRO Performance

FEL-PRO Performance products are another trusted brand when it comes to Performance Engines for your 1964 Ford GT40. Popular FEL-PRO Performance parts include:

from $41.99

(1)

Cylinder Head Gasket: Steel Core Composite, Without Head Bolts

Performance Engine Cylinder Head Gaskets

FAQs for 1964 Ford GT40 Performance Engines

What are the most purchased Performance Engines for the 1964 Ford GT40?

Out of 20 Performance Engines for the 1964 Ford GT40, the most popular in our inventory are:

from $28.99

(1)

Intake Manifold Gasket for 1963-1996 Small-Block Fords

Performance Engine Intake Manifold Gaskets

from $67.99

This product is not rated

Performer-Link Adjustable True-Roller Timing Chain Set

Performance Engine Timing Sets and Components

from $27.49

This product is not rated

PERFORMANCE OIL PAN GASKET SET

Performance Engine Oil Pan Gaskets

What are the top-rated 1964 Ford GT40 Performance Engines?

Top-rated Performance Engines for your 1964 Ford GT40 based on customer reviews/ratings are:

from $597.99

(1)

Performer 390 Intake Manifold for Ford FE, Satin Finish

“lightweight-runs great…took 80lbs off my engine”

from $111.99

(1)

Sure Seat Valve Springs for Ford 429/460 V8 1969-1987

“THIS WAS NOT A COMPLETE KIT!ONLY GOT VALVE SPRINGS!!!”

1964 Ford GT40 Performance Engines

More 1964 Ford GT40 Performance Engines

Essential 1964 Ford GT40 Performance Engines

Edelbrock – Performer Small-Block Ford 1.90" Cylinder Head Hydraulic Flat Tappet (Part No.60329)

Edelbrock – Performer-Link Adjustable True-Roller Timing Chain Set (Part No.7820)

FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1614)

Edelbrock – Valve Cover Gasket Set for Ford (Part No.7568)

FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1613)

Edelbrock – Performer Series Retainer (Qty 16) (Part No.9724)

FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1011-1)

FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1020)

Edelbrock – Pushrod Set for Ford 289-302 (Part No.9655)

Competition Cams – PUSHROD SET, SBF HIGH ENERGY 1 ST (Part No.7831-16)

Edelbrock – Intake Manifold Gasket for 1963-1996 Small-Block Fords (Part No.7220)

FEL-PRO Performance – Lower Intake Manifold Gasket Set: 11 Piece Set (Part No.1250)

FEL-PRO Performance – Lower Intake Manifold Gasket Set: 5 Piece Set (Part No.1246)

Edelbrock – Performer 390 Intake Manifold for Ford FE, Satin Finish (Part No.2105)

Edelbrock – Performer 289 Intake Manifold for Small-Block Ford (Part No.2121)

FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1817)

Edelbrock – Sure Seat Valve Springs for Ford 429/460 V8 1969-1987 (Part No.5767)

Edelbrock – Sure Seat Valve Springs for Ford 289-302 (Part No.5822)

Edelbrock – Sure Seat Valve Springs for Chrysler 383-400-413-440 V8 1969-79 (Part No.5792)

Popular 1964 Ford GT40 Performance Engines Categories