1964 Ford Falcon Flywheels

The ring gear has teeth which engage with the starter motor allowing the engine to crank over and start. Repeated engagement with the starter results in worn or broken ring gear teeth. Once this is diagnosed, the ring gear must be replaced. Pioneer ring gears are designed to fit and function just like the original part to ensure durability and long life.

The ring gear has teeth which engage with the starter motor allowing the engine to crank over and start. Repeated engagement with the starter results in worn or broken ring gear teeth. Once this is diagnosed, the ring gear must be replaced. Pioneer ring gears are designed to fit and function just like the original part to ensure durability and long life.

ATP Flywheel Shims install easily restoring machined manual transmission flywheels back to the proper height. On automatic transmissions the shim takes up excessive clearance caused by engine crankshaft endplay or by installing a rebuilt torque converter or rebuilt front pump.

ATP Flywheel Shims install easily restoring machined manual transmission flywheels back to the proper height. On automatic transmissions the shim takes up excessive clearance caused by engine crankshaft endplay or by installing a rebuilt torque converter or rebuilt front pump.

ATP Flywheel Shims install easily restoring machined manual transmission flywheels back to the proper height. On automatic transmissions the shim takes up excessive clearance caused by engine crankshaft endplay or by installing a rebuilt torque converter or rebuilt front pump.

Vehicles with automatic transmissions have a flex plate. The flex plates connect the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious and expensive damage. Broken flex plates cannot be repaired, they must be replaced. Pioneer Flex Plates are made of high-quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability.

Hays heavy-duty flexplates for high-performance and competition engines are constructed of a thicker than stock steel plate, enabling them to withstand the stress of high-stall torque converters and high-RPM engines. While factory stock plates tend to crack around the crankshaft hub when punished under high torque and RPM conditions, the thicker Hays flexplate handles the force. These H.D. flexplates are supplied with a ring gear that is securely welded in place and feature dual bolt patterns for flexibility in adapting to multiple transmission style torque converters. All Hays heavy-duty flexplates are zinc-dichromate plated to resist corrosion and are SFI certified under specification 29.1.

Hays billet steel flywheels are manufactured from certified billet material that will not break up under the stress of high RPM and severe punishment of racing. Available in weights up to 50 pounds for specialized applications, most Hays flywheels are drilled with both the Borg and Beck and long-style clutch patterns. Hays flywheels are certified under SFI spec 1.1.

Vehicles with automatic transmissions have a flex plate. Flex plates connect the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability

As performance levels increase, an O.E. style flex plate just won’t cut it and a stronger option is a necessity to prevent transmission and/or converter failure. B&M has you covered with our high-performance flex plate designed for 1963-1982 Ford, Lincoln, and Mercury (internally balanced) 289-351ci small block V8 engines with a C4 transmission. Features include high tensile strength steel construction to resist elongation and cracking, a 10.50-inch bolt pattern, and 157 tooth ring gear. B&M flexplates are ideal for hot rods, street cars, tow vehicles, or other vehicles needing the added protection and toughness that B&M has been delivering since 1953.

ATP M/T FLYWHEEL, Z-401. DRIVELINE – CLUTCHES>CLUTCH KITS, HYDRAULICS & PARTS>CLUTCH PARTS>FLYWHEELS from ATP

Vehicles with automatic transmissions have a flex plate. The flex plates connects the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability

LuK rigid flywheels, a smart alternative to resurfacing,�offer a smooth, flat surface crucial for proper clutch operation, are engineered and manufactured to OE specifications, and are dynamically balanced to eliminate vibration and increase clutch performance

Hays heavy-duty flexplates for high performance and competition engines are constructed of a thicker than stock steel plate, enabling them to withstand the stress of high-stall torque converters and today’s high-RPM engines. While factory stock plates tend to crack around the crankshaft hub when punished under high torque and RPM conditions, the thicker Hays Flexplate handles the force. These H.D. flexplates are supplied with a ring gear that is securely welded in place and feature dual bolt patterns for flexibility in adapting to multiple transmission style torque converters. All Hays heavy-duty flexplates are zinc-dichromate plated to resist corrosion and are SFI certified under specification 29.1.