1964 Ford Falcon Differentials

Essential 1964 Ford Falcon Differentials

Yukon Gear – Standard Open Spider Gear Kit For And 9" Ford With 28 Spline Axles And 4-Pinion Design (Part No.16032)

Standard Open Spider Gear Kit For And 9" Ford With 28 Spline Axles And 4-Pinion Design

from

$315.99
Yukon standard open spider gear kit for and 9″ Ford with 28 spline axles and 4-pinion design. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.

Product Features:
  • Spider gear kit
  • Fits Ford 8″ and 9″ open differential with 28 spline axles
  • Includes two side gears, four pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
See More

Yukon Gear – High Performance Ring & Pinion Gear Set For Ford 9" In A 5.67 Ratio (Part No.24389)

High Performance Ring & Pinion Gear Set For Ford 9" In A 5.67 Ratio

from

$484.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.

Product Features:
  • Fits Ford 9″
  • 9.00″ ring gear diameter
  • 28 spline pinion
  • 10 ring gear bolts
  • 5.67 ratio
See More

FAG US – CUP (Part No.LM67010)

CUP

from

$6.69
CUP

Yukon Gear – Bearing Race Driver (Part No.56017)

Bearing Race Driver

from

$215.99
Bearing race driver. No return.

Product Features:
  • Bearing race driver
  • Fits HM89410 race
  • All steel construction
See More

USA Standard Gear – Spool For Ford 9", 31 Spline (Part No.59004)

Spool For Ford 9", 31 Spline

from

$175.99
Product Features:
  • Fits Ford 9″ with 31 spline axles
  • Provides 100% traction to both wheels at all times
  • Not recommended for street driven vehicles
See More

Yukon Gear – Pinion Support Bolt For 8" And 9" Ford (Part No.33242)

Pinion Support Bolt For 8" And 9" Ford

from

$6.99
Pinion support bolt for 8″ and 9″ Ford.

Product Features:
  • Pinion support bolt for Ford 8″ and 9″
  • 3/8″ x 24 thread
  • 1.0″ long
See More

Yukon Gear – 8" Dropout Housing Gasket (Part No.23010)

8" Dropout Housing Gasket

from

$11.99
8″ dropout housing gasket.

Product Features:
  • Dropout gasket
  • Fits Ford 8″
See More

Yukon Gear – Pinion Install Kit For Ford Daytona 9" Differential (Part No.13045)

Pinion Install Kit For Ford Daytona 9" Differential

from

$284.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits Ford 9″ with Daytona pinion support
  • Included are pinion bearings and races, pinion seal, pinion nut, crush sleeve, complete pinion shim kit, and marking compound with brush.
See More

Powertrax – No-Slip Traction System (Part No.9206902800)

No-Slip Traction System

from

$551.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    Yukon Gear – Trac Loc Clutch Hub For 9" Ford With 28 Splines (Part No.16159)

    Trac Loc Clutch Hub For 9" Ford With 28 Splines

    from

    $139.99
    Trac Loc clutch hub for 9″ Ford with 28 splines.

    Product Features:
    • Clutch hub
    • Fits Ford 8″ and 9″ 28 spline Trac Loc
    See More

    Yukon Gear – Ford 8" & 9" Standard Open, Ag, & Detroit Locker Ring Gear Bolt (Part No.33043)

    Ford 8" & 9" Standard Open, Ag, & Detroit Locker Ring Gear Bolt

    from

    $5.99
    Ford 8″ & 9″ standard Open, AG, & Detroit locker ring gear bolt, 1.0″ long, Ford.

    Product Features:
    • Ring gear bolt for Ford 8″ and 9″
    • For use with standard open carrier, Auburn Gear limited slip and Detroit Locker
    • 1.0″ long
    See More

    Yukon Gear – Outer Oil Slinger For Ford 7.5", 8.8", 9", 10.25" (Part No.33022)

    Outer Oil Slinger For Ford 7.5", 8.8", 9", 10.25"

    from

    $8.99
    Replacement outer oil slinger for Ford 7.5″, 8.8″, 9″, 10.25″, Nissan Titan rear, Dana 44 Rubicon & 44 JK non-Rubicon.

    Product Features:
    • Outer oil slinger for Ford 10.25″, 7.5″, 8.8″ and 9″ also Jeep JK and Nissan Titan rear
    See More

    Yukon Gear – Extra HD 3.062" Nodular Iron Dropout For Ford 9" (Part No.32099)

    Extra HD 3.062" Nodular Iron Dropout For Ford 9"

    from

    $615.99
    Yukon Extra HD 3.062″ nodular Iron dropout for Ford 9″. Yukon nodular iron dropouts feature a 5/8″ cap bolt and forged caps for maximum strength. Rated up to 1200HP!

    Product Features:
    • Fits Ford 9″
    • 3.062″ carrier race diameter
    • Nodular iron for added strength
    See More

    Yukon Gear – 3.062" Side Adjuster For Ford 9" (Part No.32139)

    3.062" Side Adjuster For Ford 9"

    from

    $94.99
    3.062″ side adjuster, Only Fits Yukon Ford 9″ Drop Out, new design ONLY.

    Product Features:
    • Side adjuster
    • Fits Ford 9″
    • 3.062″ designs only
    See More

    Yukon Gear – Yoke For Ford 9" With 28 Spline Pinion And A 1330 U/Joint Size (Part No.41143)

    Yoke For Ford 9" With 28 Spline Pinion And A 1330 U/Joint Size

    from

    $242.99
    Yukon yoke for Ford 9″ with 28 spline pinion and a 1330 U/joint size. 5″ length. 3.625″ snap ring span, 1.125″ cap diameter. Outside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.

    Product Features:
    • Fits Ford 9″
    • 28 spline
    • 1330 u-joint size
    • Outside snap ring design
    • 3.625″ snap ring span
    • 1.125″ cap diameter
    • U-bolt style
    See More

    Yukon Gear – DiffrlPinSupport (Part No.32358)

    DiffrlPinSupport

    from

    $819.99
    DiffrlPinSupport

    Yukon Gear – Trac-Loc For Ford 8" Wtih 31 Spline Axles – Street Design (Part No.26004)

    Trac-Loc For Ford 8" Wtih 31 Spline Axles - Street Design

    from

    $819.99
    The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon-Trac Loc uses a nodular case, billet side hat, and forged internals for higher strength than stock Trac-Locs. The units use composite clutches for high performance and long life. All units are Rebuildable. Yukon offers a one year warranty against manufacturing defects.

    Product Features:
    • Fits Ford 8″ with 31 spline axles
    • Trac Loc positraction
    • Clutch style positraction
    • Smooth design
    • Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
    • Fully rebuildable
    • Assembled in the USA
    See More

    Yukon Gear – One (1) Specialty Bearing Race To Adapt Small Bearing Journal Into A 3.250" Dropout (Part No.32157)

    One (1) Specialty Bearing Race To Adapt Small Bearing Journal Into A 3.250" Dropout

    from

    $51.99
    One (1) specialty bearing race to adapt small bearing journal into a 3.250″ dropout. This adapter allows the use of a 28 or 31 spline carrier, positraction or locker in a 3.250″ dropout. This is a perfect solution if you are currently running 28 or 31 spline axles but are looking to upgrade to 35 spline later, or are stepping down from 35 spline but don’t want to buy a new dropout.

    Product Features:
    • Carrier race
    • Fits Ford 9″
    • Conversion race to install small bearing carrier into 3.250″ dropout
    See More

    National – Multi Purpose Seal (Part No.7044NA)

    Multi Purpose Seal

    from

    $15.79
    National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Low swell in hydrocarbon fluids
    • Design type: spring loaded; multi-lip
    • Provides good low temperature capability
    • Temperature range: -40°F to 225°F; -40°C to 107°C
    • Delivers quality and reliable performance for every type of repair
    See More

    Yukon Gear – Pinion Gear And Thrust Washer For 8" And 9" Ford, Model 20, And 7.25" Chrysler (Part No.33301)

    Pinion Gear And Thrust Washer For 8" And 9" Ford, Model 20, And 7.25" Chrysler

    from

    $4.99
    Pinion gear thrust washer for 8″ and 9″ Ford, Model 20, and 7.25″ Chrysler.

    Product Features:
    • Pinion gear thrust washer for Ford 8″, Ford 9″ and Chrysler 7.25″
    See More

    National – Shaft Repair Sleeve (Part No.99193)

    Shaft Repair Sleeve

    from

    $43.99
    National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Designed to repair damaged, grooved or worn shafts
    • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
    • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
    • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
    • Easy to install with removable flange and installation tool
    • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
    See More

    Yukon Gear – 3 Qt – 80W90 Conventional Gear Oil With Posi Additive (Part No.15003)

    3 Qt - 80W90 Conventional Gear Oil With Posi Additive

    from

    $57.99
    3 Qt. Penzoil 80W90 conventional gear Oil. W/ bottle of Posi additive.

    Product Features:
    • Includes three quarts of conventional oil and one 4oz bottle of Yukon positraction additive
    See More

    Yukon Gear – Crush Sleeve Eliminator Kit For Ford 9" (Part No.55041)

    Crush Sleeve Eliminator Kit For Ford 9"

    from

    $68.99
    9″ Ford 2 piece solid preload pinion spacer, Daytona or standard.

    Product Features:
    • Crush sleeve eliminator kit for Ford 9″ with 28 spline pinion
    See More

    National – Bearings (Part No.M86610)

    Bearings

    from

    $9.49
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Crowned raceways and rollers to ensure even load distribution for maximum life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    Yukon Gear – The Carrier Bearing Puller (Part No.56034)

    The Carrier Bearing Puller

    from

    $689.99
    The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

    Product Features:
    • Carrier bearing puller
    • Works with an impact gun to safely and easliy remove carrrier bearings
    • Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
    See More

    Yukon Gear – 8" Ford O-Ring (Part No.30027)

    8" Ford O-Ring

    from

    $9.99
    8″ Ford O-ring.

    Product Features:
    • Pinion support o-ring
    • Fits Ford 8″
    See More

    Powertrax – Grip PRO Traction System (Part No.GT109028)

    Grip PRO Traction System

    from

    $496.99
    For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!
    See More

    Yukon Gear – Adjuster Lock Bolt 3.062" & 3.250" Ford 9" Drop Out (Part No.32149)

    Adjuster Lock Bolt 3.062" & 3.250" Ford 9" Drop Out

    from

    $3.99
    Adjuster lock bolt 3.062″ & 3.250″ Yukon Ford 9″ Drop Out.

    Product Features:
    • Side adjuster lock bolt
    See More

    1964 Ford Falcon Differentials

    Maybe you’re in the middle of a full rebuild of that 1964 Ford Falcon. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 250 different Differentials in our inventory ranging from $2.89 to $1,566.99. That means you can find the exact parts or products you need to keep that 1964 Ford Falcon running smoothly.

    Differentials are only as good as their brand. We stock 12 different brands to make sure you have plenty of trusted parts to choose from for your 1964 Ford Falcon. Yukon Gear, National, and FELPRO are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

    We know you’ll find the perfect Differentials for your 1964 Ford Falcon, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 15 reviews in this category, some of the top rated parts include No-Slip Traction System with 5.0 stars.

    So if you’re in the market for aftermarket Differentials to keep your 1964 Ford Falcon rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

    Differentials Brands To Make Your 1964 Ford Falcon Last

    Simple repair, complete replacement, or a full rebuild. No matter the job, your 1964 Ford Falcon demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your Falcon the best it can be. Be sure to browse some of our top Differentials brands and parts.

    Popular National Differentials

    We carry National parts in our stock across Differential Pinion Pilot Bearings categories, plus more. For a 1964 Ford Falcon, our most popular National Differentials include:
    Shaft Repair Sleeve
    from $43.99
    (2)
    Shaft Repair Sleeve
    Differential Pinion Pilot Bearings

    FAQs for 1964 Ford Falcon Differentials

    What are the most purchased Differentials for the 1964 Ford Falcon?

    Out of 250 Differentials for the 1964 Ford Falcon, the most popular in our inventory are:
    3 Qt - 80W90 Conventional Gear Oil With Posi Additive
    from $57.99
    This product is not rated
    3 Qt – 80W90 Conventional Gear Oil With Posi Additive
    Differential Oil
    Bearings
    from $9.49
    This product is not rated
    Bearings
    Rear Differential Pinion Bearings
    Bearings
    from $15.49
    This product is not rated
    Bearings
    Front Differential Pinion Bearings

    What are the top-rated 1964 Ford Falcon Differentials?

    Top-rated Differentials for your 1964 Ford Falcon based on customer reviews/ratings are:
    No-Slip Traction System
    from $551.99
    (1)
    No-Slip Traction System
    “Installed, no issues, works great.”