1964 Chevrolet Suburban Steering and Chassis Parts

Essential Steering and Chassis Parts for 1964 Chevrolet Suburbans

Carquest Premium – Control Arm with Ball Joint (Part No.810-610111B)

Control Arm with Ball Joint

from

$129.99
CARQUEST Premium Control Arms are engineered and benchmarked to Original Equipment (OE) performance standards. Consistent manufacturing and rigorous quality testing ensure a trouble-free installation and long service life. Each part number in the Carquest Premium Control Arm line is designed and built to deliver the quality that professionals demand.

Product Features:
  • Application specific, direct fitment for trouble-free installation. Engineered OE Form, Fit, and Function.
  • Pre-installed ball joints and bushings (when applicable) for easy installation
  • Hardware included for easier installation
See More

Yukon Gear – Ball Joint Kit For Dana 30, Dana 44 & GM 8.5", Not Dodge, One Side (Part No.33453)

Ball Joint Kit For Dana 30, Dana 44 & GM 8.5", Not Dodge, One Side

from

$157.99
Ball Joint kit for Dana 30, Dana 44 & GM 8.5″, not Dodge, one side. This replaces Spicer part number 706116X.

Product Features:
  • Ball joint kit for Dana Spicer 30 and 44
  • Complete kit for upper and lower
  • Services one side
  • Replaces Spicer part number 706116X
See More

Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)

Transmission Oil Cooler Reinstallation Kit

from

$20.79
Provides all necessary components for the proper reinstallation of an Imperial transmission oil cooler.

Product Features:
  • Transmission cooler reinstallation kit
  • Contains part numbers 248001, 226201, 240250 and 4 hose clamps
  • Provides all hardware for reinstallation of Imperial transmission coolers
  • Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
See More

Carquest Premium – Stabilizer Bar Link Kit (Part No.500-610141)

Stabilizer Bar Link Kit

from

$15.49
Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability.  Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications.  Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and  perform the way professional technicians demand.  

Product Features:
  • OE matched design for Form, Fit, and Function
  • Advanced corrosion-resistant electro-coating to reduce rust
  • Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
  • Hex formed studs &/or wrench flats for ease of installation
  • Hardware included for easier installation (where applicable)
See More

National – Bearings (Part No.11520)

Bearings

from

$10.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Imperial – Quick Connect Coupler (Part No.240250)

Quick Connect Coupler

from

$11.49
Imperial transmission line fitting kits allow for the installation of auxiliary cooler lines without cutting the vehicle’s original metal lines.

Product Features:
  • Quick Connect coupler
  • Fits most 5/16″ transmission lines with 1/2″ – 20″ threads
  • Simplifies transmission cooler installation
  • Allows for auxiliary transmission cooler installation without cutting OE lines
See More

National – Multi Purpose Seal (Part No.7013S)

Multi Purpose Seal

from

$18.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Carquest Premium – 3/8" ID Return Hose (sold by each) (Part No.34995)

3/8" ID Return Hose (sold by each)

from

$2.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
See More

Powercraft – Control Valve Seal Kit (Part No.7864)

Control Valve Seal Kit

from

$24.29
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Rare Parts – Track Bar Bushing (Part No.RP16992)

Track Bar Bushing

from

$43.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Reduces vibration
  • UV resistant
  • No Squeak
See More

Edelmann – Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles (Part No.70699)

Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles

from

$31.49
Product Features:
  • Interchangeable end sizes allow the filter to fit virtually any hose size and vehicle
  • Small size provides an easy fit, even in cramped systems
  • Dual filtration technology eliminates metal and non-metal debris, ensuring a cleaner system
  • Filter can be easily serviced, extending its functional lifespan considerably
See More

Monroe – Magnum Steering Damper (Part No.SC2915)

Magnum Steering Damper

from

$58.99
The Monro-Magnum® steering stabilizer stops vibration before it gets to the driver. Acting as a horizontal shock absorber, Monro-Magnum® steering stabilizers help reduce vibrations that travel through the steering system to the driver.

Product Features:
  • 1/2 inch Piston Rod Heavy-duty nitrocarburized rod for long service life
  • All Weather Fluid Contains special modifiers to reduce friction and ensure smooth rod reaction.
  • Full Displaced Valving Better valving range on both the compression and extension cycles of the unit for a smooth comfortable ride.
  • Micro-Cellular Gas Design Allows unit to be mounted horizontally.
  • Sintered Iron Piston Stronger than traditional metals, enhances durability for longer service life.
  • Special Seal ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
See More

Powercraft – Pump Seal Kit (Part No.7918)

Pump Seal Kit

from

$36.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Powercraft – Pump Drive Shaft Seal Kit (Part No.8709)

Pump Drive Shaft Seal Kit

from

$13.29
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Lares – New Steering Coupling Assembly (Part No.202)

New Steering Coupling Assembly

from

$52.99
New Rag Joint steering couplers are carefully engineered to OE specifications. All units are complete with lower casting, rubber disk and mounting bolts already assembled for easy, trouble free installation. All units are carefully packaged to insure safe arrival at your door
See More

Carquest Premium – 3/8" I.D. Return Hose (J189) (sold by foot) (Part No.35001)

3/8" I.D. Return Hose (J189) (sold by foot)

from

$7.79
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
See More

MOOG – Alignment Shim Multi-Pack (Part No.K100264)

Alignment Shim Multi-Pack

from

$20.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Construction and design validated by MOOG engineers
  • Easy to install
  • Shims provide precise camber, caster and toe adjustments
  • Incorporates proven design and engineering features
  • MOOG alignment parts can solve excessive tire wear and steering issues
See More

MOOG – Ball Joint (Part No.K680)

Ball Joint

from

$112.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
  • STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
See More

Rare Parts – Tie Rod End (Part No.RP25324)

Tie Rod End

from

$55.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Restores vehicle handling
  • Restores OE alignment
  • Reduces tire wear
  • Improves steering response
See More

National – Multi Purpose Seal (Part No.480821)

Multi Purpose Seal

from

$7.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

MOOG – Alignment – Adjustment Kit (Part No.K100274)

Alignment - Adjustment Kit

from

$34.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Easy to install
  • Returns like-new steering
  • Long-lasting performance
  • Construction and design validated by MOOG engineers
  • Incorporates proven design and engineering features
See More

MOOG – Idler Arm (Part No.K14)

Idler Arm

from

$144.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Heavy-duty design
  • Loose or worn chassis parts can lead to premature tire wear
  • Engineered steel composition results in a stronger component
  • Powdered metal gusher bearing design enables grease to flow through bearing to
  • Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
See More

National – Multi Purpose Seal (Part No.PSK-1)

Multi Purpose Seal

from

$28.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Lares – Remanufactured Manual Steering Gear Box (Part No.8010)

Remanufactured Manual Steering Gear Box

from

$431.99
Manual Steering Gears are thoroughly cleaned and exterior surfaces reconditioned for like-new look. Each component is carefully inspected and replaced if not to OE tolerances. All seals and O-rings are replaced with OE equivalent parts. Each unit is filled with a high quality grease with a special polymer to reduce oil separation. Each unit is tested to insure OE performance. Painted with a high quality paint. All units are carefully packaged to insure safe arrival at your door. Remanufactured in the USA.
See More

Lares – Remanufactured Power Steering Control Valve (Part No.25)

Remanufactured Power Steering Control Valve

from

$298.99
Power Steering Control Valves are thoroughly cleaned and exterior surfaces reconditioned for like-new look. Each component is carefully inspected and replaced if not to OE tolerances. All seals and O-rings are replaced with OE equivalent parts. Each unit is tested and balanced to insure OE performance. Ball joints are properly lubricated. Painted with a high quality paint. All units are carefully packaged to insure safe arrival at your door. Remanufactured in the USA.
See More

Lares – Remanufactured Power Steering Cylinder (Part No.55)

Remanufactured Power Steering Cylinder

from

$204.99
Power Steering Cylinders are thoroughly cleaned and exterior surfaces reconditioned for like-new look. Each component is carefully inspected and replaced if not to OE tolerances. All units have new chrome shafts. All seals and O-rings are replaced with OE equivalent parts. Each unit is tested to insure OE performance. Painted with a high quality paint. All units are carefully packaged to insure safe arrival at your door. Remanufactured in the USA.
See More

National – Multi Purpose Seal (Part No.204005)

Multi Purpose Seal

from

$6.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Rare Parts – Tie Rod Sleeve (Part No.RP25395)

Tie Rod Sleeve

from

$31.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Complete with clamps
  • Used to set Toe in or out
  • replaces rusted or corroded sleeves
  • Used to connect inner and outer tie rod ends
See More

Upgrade your 1964 Chevrolet Suburban with Top-Quality Steering and Chassis Parts

When it comes to maintaining or upgrading your 1964 Chevrolet Suburban, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Steering and Chassis Parts are key to keeping your Suburban functioning at its best. At Advance Auto Parts, we offer a wide selection of 53 Steering and Chassis Parts for the 1964 Chevrolet Suburban, designed to meet your needs without breaking the bank. From Gear Box replacements to Sway Bars upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Steering and Chassis Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Steering and Chassis Parts for your 1964 Chevrolet Suburban at great prices. Our Steering and Chassis Parts inventory for this model ranges from just $2.99 to $431.99, with an average price of $68.01. Our 53 Steering and Chassis Parts in stock come from 12 trusted brands, so you’re sure to find the right part for your 1964 Chevrolet Suburban without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1964 Chevrolet Suburban, we stock popular OEM and aftermarket Steering and Chassis Parts from top names like Imperial Driveworks, and more. Imperial Steering and Chassis Parts start at just $11.49 and boast an impressive 4 stars average rating from customers. With 930 customer reviews and counting, our 1964 Chevrolet Suburban Steering and Chassis Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Steering and Chassis Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1964 Chevrolet Suburban is always ready to roll. We’re committed to providing you with everything you need to keep your Suburban in top shape, all in one place. Start shopping confidently below for your 1964 Chevrolet Suburban!

Best-Selling Gear Boxes for 1964 Chevrolet Suburbans

Enhance the driving experience in your Chevrolet with 3 quality Gear Box components, starting at $54.99.

Monroe – Magnum Steering Damper (Part No.SC2915)

Magnum Steering Damper

from

$58.99
The Monro-Magnum® steering stabilizer stops vibration before it gets to the driver. Acting as a horizontal shock absorber, Monro-Magnum® steering stabilizers help reduce vibrations that travel through the steering system to the driver.

Product Features:
  • 1/2 inch Piston Rod Heavy-duty nitrocarburized rod for long service life
  • All Weather Fluid Contains special modifiers to reduce friction and ensure smooth rod reaction.
  • Full Displaced Valving Better valving range on both the compression and extension cycles of the unit for a smooth comfortable ride.
  • Micro-Cellular Gas Design Allows unit to be mounted horizontally.
  • Sintered Iron Piston Stronger than traditional metals, enhances durability for longer service life.
  • Special Seal ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
See More

Lares – Remanufactured Manual Steering Gear Box (Part No.8010)

Remanufactured Manual Steering Gear Box

from

$431.99
Manual Steering Gears are thoroughly cleaned and exterior surfaces reconditioned for like-new look. Each component is carefully inspected and replaced if not to OE tolerances. All seals and O-rings are replaced with OE equivalent parts. Each unit is filled with a high quality grease with a special polymer to reduce oil separation. Each unit is tested to insure OE performance. Painted with a high quality paint. All units are carefully packaged to insure safe arrival at your door. Remanufactured in the USA.
See More

Monroe – Magnum Steering Damper (Part No.SC2917)

Magnum Steering Damper

from

$54.99
The Monro-Magnum® steering stabilizer stops vibration before it gets to the driver. Acting as a horizontal shock absorber, Monro-Magnum® steering stabilizers help reduce vibrations that travel through the steering system to the driver.

Product Features:
  • 1/2 inch Piston Rod Heavy-duty nitrocarburized rod for long service life
  • All Weather Fluid Contains special modifiers to reduce friction and ensure smooth rod reaction.
  • Full Displaced Valving Better valving range on both the compression and extension cycles of the unit for a smooth comfortable ride.
  • Micro-Cellular Gas Design Allows unit to be mounted horizontally.
  • Sintered Iron Piston Stronger than traditional metals, enhances durability for longer service life.
  • Special Seal ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
See More

Most Popular 1964 Chevrolet Suburban Sway Bars

Customize your Chevrolet with 1 Sway Bars products like Sway Bar Link Bushing Kits, all priced under $10.29.

MOOG – Stabilizer Bar Bushing Kit (Part No.K5227)

Stabilizer Bar Bushing Kit

from

$10.29
Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • PREMIUM MATERIALS — Made from high-quality natural rubber material for durability and ride performance
  • EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
  • HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • Inner sleeve is phosphate coated for corrosion protection
See More

Top Picks for 1964 Chevrolet Suburban Power Steering Parts

Upgrade Chevrolet Suburbans with top-quality Power Steering Parts parts, including 24 OEM and aftermarket selections for your 1964 model.

Powercraft – Pump Drive Shaft Seal Kit (Part No.8709)

Pump Drive Shaft Seal Kit

from

$13.29
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Cardone – Power Steering Filter (Part No.20-0058F)

Power Steering Filter

from

$48.49
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element
  • Patented built-in bypass that filters up to 190 micron particles
  • Designed to extend the life of the steering system
  • Sure-grip barb connections are included to ensure proper hose fitment
See More

Cardone – Power Steering Filter (Part No.20-0012F)

Power Steering Filter

from

$46.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element
  • Patented built-in bypass that filters up to 190 micron particles
  • Designed to extend the life of the steering system
  • Sure-grip barb connections are included to ensure proper hose fitment
See More

Lares – Remanufactured Power Steering Control Valve (Part No.25)

Remanufactured Power Steering Control Valve

from

$298.99
Power Steering Control Valves are thoroughly cleaned and exterior surfaces reconditioned for like-new look. Each component is carefully inspected and replaced if not to OE tolerances. All seals and O-rings are replaced with OE equivalent parts. Each unit is tested and balanced to insure OE performance. Ball joints are properly lubricated. Painted with a high quality paint. All units are carefully packaged to insure safe arrival at your door. Remanufactured in the USA.
See More

Imperial – Mounting Kit System (Part No.226201)

Mounting Kit System

from

$11.49
Product Features:
  • Imperial mounting kit system
  • For installation of transmission coolers and electric fans
  • Provides quick, effective installation of Imperial products
  • Contains nylon mounting rods, foam pads and locking buttons
  • Atermarket electric fan and cooler mounting rods
  • Made with the highest quality materials
  • Quality machined for durability
  • Removable buttons for relocation
See More

Powercraft – Pump Seal Kit (Part No.7918)

Pump Seal Kit

from

$36.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Imperial – Transmission Oil Cooler Hose (Part No.248001)

Transmission Oil Cooler Hose

from

$32.49
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:
  • Transmission oil cooler hose
  • 11/32″ x 4-1/2′
  • Designed for transmission fluid applications
  • Made for tight-radius applications found in transmission cooler installations
  • Compatible with 11/32 in. OEM cooler systems
  • Tube made of black chemigum (nitrile)
  • Reinforced with 2-spiral synthetic
  • Covered in black Hypalon
  • Compatible with 11/32 in. OEM cooler systems
  • Tube made of black chemigum (nitrile)
  • Reinforced with 2-spiral synthetic
  • Covered in black Hypalon
See More

Cardone – New Power Steering Filter (Part No.20-0038F)

New Power Steering Filter

from

$31.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element.
  • Patented built-in bypass that filters up to 190 micron particles.
  • Designed to extend the life of the steering system.
  • Sure-grip barb connections are included to ensure proper hose fitment.
See More

Powercraft – Pump Complete Rebuild Kit (Part No.7910)

Pump Complete Rebuild Kit

from

$62.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Imperial – Power Steering Oil Cooler (Part No.241009)

Power Steering Oil Cooler

from

$28.49
Product Features:
  • Power steering oil cooler
  • 3/4″ x 2-1/2″ x 9″
  • For vehicles with 3/8″ I.D. power steering return hose
  • Removes destructive heat and prolongs power steering system life
  • Compatible with OEM cooler systems
  • Ultrasonically soldered for reliability
  • 100% pressure testing to 150 PSI for quality assurance
  • High efficiency turbulators
See More

Imperial – Quick Connect Coupler (Part No.240250)

Quick Connect Coupler

from

$11.49
Imperial transmission line fitting kits allow for the installation of auxiliary cooler lines without cutting the vehicle’s original metal lines.

Product Features:
  • Quick Connect coupler
  • Fits most 5/16″ transmission lines with 1/2″ – 20″ threads
  • Simplifies transmission cooler installation
  • Allows for auxiliary transmission cooler installation without cutting OE lines
See More

Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)

Transmission Oil Cooler Reinstallation Kit

from

$20.79
Provides all necessary components for the proper reinstallation of an Imperial transmission oil cooler.

Product Features:
  • Transmission cooler reinstallation kit
  • Contains part numbers 248001, 226201, 240250 and 4 hose clamps
  • Provides all hardware for reinstallation of Imperial transmission coolers
  • Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
See More

Imperial – Power Steering Oil Cooler Heavy Duty (Part No.241011)

Power Steering Oil Cooler Heavy Duty

from

$36.99
3/4″ x 5″ x 9-1/4″ power steering oil cooler heavy duty. Imperial power steering coolers provide additional protection to help prolong the life of the system’s pump, hoses and seals.

Product Features:
  • Heavy-duty power steering oil cooler
  • Size: 3/4″ x 5″ x 9-1/4″
  • For vehicle with 3/8″ ID power steering return hose
  • Removes destructive heat and helps prolong power steering system life
See More

Carquest Premium – 3/8" I.D. Return Hose (J189) (sold by foot) (Part No.35001)

3/8" I.D. Return Hose (J189) (sold by foot)

from

$7.79
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
See More

Carquest Premium – 3/8" ID Return Hose (sold by each) (Part No.34995)

3/8" ID Return Hose (sold by each)

from

$2.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
See More

Cardone – Power Steering Filter (Part No.20-P038F)

Power Steering Filter

from

$31.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element
  • Patented built-in bypass that filters up to 190 micron particles
  • Designed to extend the life of the steering system
  • Sure-grip barb connections are included to ensure proper hose fitment
See More

Powercraft – Pump Drive Shaft Seal Kit (Part No.8711)

Pump Drive Shaft Seal Kit

from

$7.79
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Powercraft – Power Cylinder Complete Rebuild Kit (Part No.8537)

Power Cylinder Complete Rebuild Kit

from

$27.49
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Edelmann – Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles (Part No.70699)

Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles

from

$31.49
Product Features:
  • Interchangeable end sizes allow the filter to fit virtually any hose size and vehicle
  • Small size provides an easy fit, even in cramped systems
  • Dual filtration technology eliminates metal and non-metal debris, ensuring a cleaner system
  • Filter can be easily serviced, extending its functional lifespan considerably
See More

Powercraft – Control Valve Seal Kit (Part No.7864)

Control Valve Seal Kit

from

$24.29
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Lares – Remanufactured Power Steering Cylinder (Part No.55)

Remanufactured Power Steering Cylinder

from

$204.99
Power Steering Cylinders are thoroughly cleaned and exterior surfaces reconditioned for like-new look. Each component is carefully inspected and replaced if not to OE tolerances. All units have new chrome shafts. All seals and O-rings are replaced with OE equivalent parts. Each unit is tested to insure OE performance. Painted with a high quality paint. All units are carefully packaged to insure safe arrival at your door. Remanufactured in the USA.
See More

Lares – PS CYLINDER-NEW (Part No.10055)

PS CYLINDER-NEW

from

$231.99
PS CYLINDER-NEW

Powercraft – Pump Seal Kit (Part No.8755)

Pump Seal Kit

from

$34.49
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Powercraft – Power Cylinder Piston Rod Seal Kit (Part No.7906)

Power Cylinder Piston Rod Seal Kit

from

$22.79
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More

In-Demand Tie Rods for 1964 Chevrolet Suburbans

Select from 6 premium Tie Rods parts for your 1964 Chevrolet Suburban, with prices ranging from $21.99 to $113.99.

MOOG – Tie Rod End (Part No.ES323L)

Tie Rod End

from

$57.99
Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • ABSORBS IMPACT — Belleville preload washer helps eliminate spring bind and shattering during shock load
  • PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
  • STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
  • GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
See More

Driveworks – Tie Rod End (Part No.DW-ES323L)

Tie Rod End

from

$21.99
When replaced, Driveworks Brand tie rod ends help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks Brand chassis parts help ensure improved steering response and durability.

Product Features:
  • Meets or exceeds OE performance specifications
  • Performance tested to ensure durability
  • Forged micro-alloy steel construction for strength and durability
  • A slotted nut and cotter pin for a more secure installation
See More

MOOG – Tie Rod End (Part No.ES150L)

Tie Rod End

from

$42.49
Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction and enhanced strength
See More

Rare Parts – Tie Rod End (Part No.RP25735)

Tie Rod End

from

$113.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Restores vehicle handling
  • Restores OE alignment
  • Reduces tire wear
  • Improves steering response
See More

MOOG – Tie Rod End (Part No.ES150R)

Tie Rod End

from

$51.99
Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction and enhanced strength
See More

Rare Parts – Tie Rod Sleeve (Part No.RP25395)

Tie Rod Sleeve

from

$31.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Complete with clamps
  • Used to set Toe in or out
  • replaces rusted or corroded sleeves
  • Used to connect inner and outer tie rod ends
See More

Most Sold 1964 Chevrolet Suburban Ball Joints

Explore our best-selling Chevrolet parts for the 1964 Suburban among 7 OEM and aftermarket options starting from $11.99.

MOOG – Ball Joint (Part No.K6024)

Ball Joint

from

$44.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
  • STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
See More

MOOG – Ball Joint (Part No.K6023)

Ball Joint

from

$46.49
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
  • STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
See More

Driveworks – BALL JOINT 1 EA DRIVE (Part No.DW-K6023)

BALL JOINT 1 EA DRIVE

from

$11.99
Driveworks chassis parts help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts meet OE specifications, help ensure improved steering response and reduce tire wear.

Product Features:
  • Forged housing provides exceptional strength and durability
  • Oxidation film on the surface of the metal protects against corrosion
  • Phosphated ball stud provides a smooth, durable and wear-resistant surface to extend service life
  • Premium Polychloroprene rubber boots are fitted with grease relief valves to prevent contamination
See More

Yukon Gear – Ball Joint Kit For Dana 30, Dana 44 & GM 8.5", Not Dodge, One Side (Part No.33453)

Ball Joint Kit For Dana 30, Dana 44 & GM 8.5", Not Dodge, One Side

from

$157.99
Ball Joint kit for Dana 30, Dana 44 & GM 8.5″, not Dodge, one side. This replaces Spicer part number 706116X.

Product Features:
  • Ball joint kit for Dana Spicer 30 and 44
  • Complete kit for upper and lower
  • Services one side
  • Replaces Spicer part number 706116X
See More

Rare Parts – Conrol Arm W/Bj (Part No.RP12579)

Conrol Arm W/Bj

from

$304.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Restores vehicle handling
  • With ball joint
  • Reduces vibration
  • With bushing
See More

Rare Parts – Conrol Arm W/Bj (Part No.RP12578)

Conrol Arm W/Bj

from

$383.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Restores vehicle handling
  • With ball joint
  • Reduces vibration
  • With bushing
See More

Rare Parts – Ball Joint (Part No.RP10147)

Ball Joint

from

$26.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Heat treated components
  • Dust seal to prevent contamination
  • Restores vehicle handling
  • Restores OE alignment
See More

Top-Rated Steering and Chassis Parts Brands For Your 1964 Chevrolet Suburban

Shop for the best-rated brands offering Steering and Chassis Parts and other products for your 1964 Chevrolet Suburbans. Below you’ll find some of our best rated Steering and Chassis Parts from Imperial and Driveworks, and more. Steering and Chassis Parts from these brands that fit a 1964 Suburban start at just $8.99 and are rated as high as 4 stars. OEM and aftermarket Steering and Chassis Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Imperial 1964 Chevrolet Suburban Steering and Chassis Parts

When it comes to maintaining or upgrading your 1964 Chevrolet Suburban, using quality Steering and Chassis Parts is essential to ensure durability and a perfect fit. Imperial ticks all of those boxes. We offer a wide selection of Imperial Steering and Chassis Parts, specifically designed for the 1964 Chevrolet Suburban. With over 6 Imperial brand Steering and Chassis Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $11.49, with an average price of just $23.62. Plus, with over 213 customer reviews and an average rating of 4 stars, you can trust that our Imperial Steering and Chassis Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Mounting Kit System
from
$11.49

(27)

Mounting Kit System

“Perfect for my transmission cooler holds it very good in place”

Power Steering Oil Cooler
from
$28.49

(83)

Power Steering Oil Cooler

“Installed and properly working”

Transmission Oil Cooler Hose
from
$32.49

(94)

Transmission Oil Cooler Hose

“its a hose what cam I say”

Popular Driveworks 1964 Chevrolet Suburban Steering and Chassis Parts

Driveworks auto parts is one of the highest quality Steering and Chassis Part brands in the market. Any 1964 Chevrolet Suburban owner should feel confident when installing genuine Driveworks parts in their vehicle. To ensure the best fit and performance for your 1964 Suburban, Advance Auto Parts carries a full inventory of 3 Driveworks Steering and Chassis Parts. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these Driveworks Steering and Chassis Parts range from $8.99 to $21.99, plus, with more than 47 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Steering and Chassis Parts below will deliver on both quality and value.

Tie Rod End
from
$21.99
This product is not rated

Tie Rod End

“”

Taper Bearing Set
from
$8.99

(47)

Taper Bearing Set

“Good fit”

BALL JOINT 1 EA DRIVE
from
$11.99
This product is not rated

BALL JOINT 1 EA DRIVE

“”

FAQs for 1964 Chevrolet Suburban Steering and Chassis Parts

Which Steering and Chassis Parts are best-sellers for 1964 Chevrolet Suburbans?

Out of 53 Steering and Chassis Parts that fit 1964 Chevrolet Suburbans, the following parts are the top sellers:

What’s the price range for 1964 Chevrolet Suburban Steering and Chassis Parts?

Steering and Chassis Part prices for the 1964 Chevrolet Suburban start at $2.99 and go up to $431.99 for the most premium parts.

What’s the average price of a Steering and Chassis Part for a 1964 Chevrolet Suburban?

The average price for Steering and Chassis Parts for the 1964 Chevrolet Suburban is $68.01. Keep in mind the variety of part types within our Steering and Chassis Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Steering and Chassis Parts for other Chevrolet Suburban model years?

Yes, we currently carry Steering and Chassis Parts for 29 model years of Chevrolet Suburbans between 1947 and 2024. Steering and Chassis Parts are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, and 2015.

What are the cheapest Steering and Chassis Parts for my 1964 Chevrolet Suburban?

The cheapest 1964 Chevrolet Suburban Steering and Chassis Parts we carry in stock are:

What are the top-rated Steering and Chassis Parts that fit the 1964 Chevrolet Suburban?

Out of 930 reviews by customers, our 1964 Chevrolet Suburban Steering and Chassis Parts have an average customer rating of . These are some of the highest-rated Steering and Chassis Part types for the 1964 Chevrolet Suburban and their top-rated products:

What types of Steering and Chassis Parts do you sell for my 1964 Chevrolet Suburban?

As of 2/5/25, these are some of the most in-demand types of Steering and Chassis Parts for a 1964 Chevrolet Suburban:

Can I get help with 1964 Chevrolet Suburban Steering and Chassis Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Steering and Chassis Parts and more.

What is your return policy for Chevrolet Suburban Steering and Chassis Parts?

Advance Auto Parts keeps returns simple. For new Chevrolet Suburban Steering and Chassis Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.