1964 Chevrolet Suburban Air Intakes
More 1964 Chevrolet Suburban Air Intakes Categories
If you’re looking for an original Air Intakes replacement for a 1964 Chevrolet Suburban, you can search through our selection below. You’ll also find aftermarket and OEM Air Intakes to meet your needs.
Essential 1964 Chevrolet Suburban Air Intakes
Edelbrock – Thunder AVS Carburetor #1826 650 CFM With Electric Choke, Satin Finish (Non-EGR) (Part No.1826)
from
$464.99
New or reconditioned 650cfm. Square-flange. Electric choke without EGR. Primary jet 0.095. Secondary jet 0.098. Metering Rod 0.065 x 0.047. Dual plane intake. Spring loaded needles and seat increase performance. New qwik-tune adjustable secondary air valve. Distinctive black accented hardware. Lightweight ball burnished aluminum. No gaskets below fuel level to prevent leakage. Metering rod and step up springs can be changed easily. GM and AMC style throttle linkage.
Product Features:
See More
Product Features:
- Spring Loaded Needles/Seat Increase Performance
- New Qwik-Tune Adjustable Secondary Air Valve
- Distinctive Black Accented Hardware
- Lightweight Ball-Burnished Aluminum
- No Gaskets Below Fuel Level to Prevent Leakage
- Metering Rod/Step Up Springs Can Be Changed Easily
- GM/AMC-Style Throttle Linkage
Edelbrock – CARBURETOR (Part No.14064)
from
$541.99
Product Features:
See More
- EnduraShine Finish
- GM/AMC-Style Throttle Linkage
- Electric Choke Installed from Factory
- Easy Tuning with 2-Piece Design
- Smooth Secondary Transition
- Both Timed and Full Vacuum Ports
- Includes PCV Outlet
United Carb – Remanufactured Carburetor 2 Barrel (Part No.3-3101)
from
$277.99
Made in the USA, this remanufactured carburetor is completely disassembled and all internal parts, such as gaskets, gas filters, needle/seats and accelerator plunger cups, are discarded. All metal castings are thoroughly cleaned and restored to OEM (original equipment manufacturer) finish. Then the carburetor is reassembled to OEM-quality standards using all new component parts. Each carburetor is flow tested to simulate actual engine conditions, and all internal and external adjustments are set to OEM specifications.
See More
Felpro – Carburetor Mounting Gasket (Part No.9288)
from
$1.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Felpro – Carburetor Mounting Gasket (Part No.9394)
from
$3.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Felpro – Carburetor Mounting Gasket (Part No.9249)
from
$1.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Edelbrock – Triple Carburetor Fuel Log Kit #1288 with 5-1/2 in. Outlet Spacing (Part No.1288)
from
$99.99
This Edelbrock Fuel Log kit #1284 is an exact replica of the original design used by Vic Sr. in the 1950’s. They are made from extruded aluminum tube with a 3/8″ threaded outlet at each end and a polished finish. Kit includes, black neoprene hose, Corbin
Product Features:
See More
Product Features:
- Polished Log
- Brass Fittings
- Black Neoprene Hose
- 5-1/2 in. Outlet Spacing
- Includes Hose Clamps
Felpro – Engine Intake Manifold Gasket Set (Part No.MS 9459 B)
from
$28.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Problem-solving gaskets featuring advanced technologies
- Application specific design to ensure a perfect fit
- Exceeds original equipment specifications
- Engineered and manufactured specifically for repair applications
- Unsurpassed quality you can trust
- Includes all parts needed to complete the repair
- Includes all parts needed to complete the repair
Edelbrock – Intake Manifold Gasket for 1958-1965 348/409 "W-Series" Chevys (Part No.7240)
from
$38.99
Edelbrock part #7240 Intake Gaskets for 1958-1965 348/409 “W-Series”, Large Port Chevys allow for optimum flow and performance. Any gasket can create a seal, but a good gasket can do it with less clamping force, and for a longer period of time. The new MP
Product Features:
See More
Product Features:
- 2.50″x1.31″
- Features Embossed Silicone Bead Around The Intake Ports & Water Openings
- .060″ Thick
- Multi Piece Configuration
- End Seals Not Included
Mr. Gasket – Ultra Seal: Intake Gasket (Part No.5820)
from
$34.99
Ultra-Seal intake manifold gaskets are manufactured from cellulose/nitrile composition gasket material. Provides excellent sealing and durability. Incorporates Silicone beading around each intake and water outlet port to provide additional sealing strength on both sides of each gasket. No gasket sealer required. For OE replacement, high performance street, drag race and oval track use. Includes manifold end seals and distributor gasket.
Product Features:
See More
Product Features:
- Manufactured from cellulose/nitrile composition gasket material
- Provides excellent sealing and durability
- Silicone beading on both sides of each gasket
- Complete with manifold end seals and distributor gasket
- For OE replacement, high performance street, drag race and oval track use
Mr. Gasket – Intake Gasket (Part No.100)
from
$36.49
Mr. Gasket Performance Series intake gaskets are manufactured from cellulose/nitrile composition gasket material. They provide excellent sealing and durability. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track.
Product Features:
See More
Product Features:
- Manufactured from cellulose/nitrile composition gasket material
- Provides excellent sealing and durability
- Die-cut for an excellent fit
- Can be trimmed if necessary for modified port applications
- Complete with manifold end seals & distributor gaskets if applicable
- For OE replacement, high performance street, drag race and oval track use
Wells Vehicle Electronics – Carburetor Tune-Up Kit (Part No.2G1782)
from
$21.99
WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to OE designs. Every component either matches or improves on the OE design to ensure fast, easy installation, superior performance and reliability.
See More
Wells Vehicle Electronics – Carburetor Tune-Up Kit (Part No.2G1794)
from
$21.99
WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to OE designs. Every component either matches or improves on the OE design to ensure fast, easy installation, superior performance and reliability.
See More
Wells Vehicle Electronics – Carburetor Tune-Up Kit (Part No.2G1781)
from
$35.99
WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to OE designs. Every component either matches or improves on the OE design to ensure fast, easy installation, superior performance and reliability.
See More
Wells Vehicle Electronics – Carburetor Tune-Up Kit (Part No.2G1773)
from
$27.99
WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to OE designs. Every component either matches or improves on the OE design to ensure fast, easy installation, superior performance and reliability.
See More
Edelbrock – Carburetor Progressive Throttle Linkage Kit for Triple Carb Set-up (Part No.1033)
from
$186.99
The Edelbrock part #1033 Progressive Linkage Kit is designed to smooth throttle response, eliminate flat spots and improve fuel economy. It achieves this by only opening the center carburetor at less than 50% (or 33%) pedal travel thus sharpening the vent
Product Features:
See More
Product Features:
- Steel Material
- Zinc Plated
- Adjustable
- 3-Barrel Configuration
- Made In The USA
Edelbrock – Performer RPM Small Block Chevy AIR-Gap Intake Manifold (Part No.7501)
from
$356.99
Based on performer RPM-series with unique air gap. Air gap cooler and denser mixture for more power. Designed for 1500 to 6500 RPM. Dual-plane high-rise intake. For square bore carburetors only. For street and high performance use. Available in cast, polished or endurashine finish.
Product Features:
See More
Product Features:
- Based on Performer RPM-Series with Unique Air Gap
- Air Gap Cooler and Denser Mixture for More Power
- Designed for 1500 to 6500 RPM Street-Driven Power
- Dual-Plane High-Rise Intake
- For Square Bore Carburetors Only
Edelbrock – Torker II Intake Manifold Small-Block Chevy (Part No.5001)
from
$267.99
2500-6500 RPM high-performance street engines. Single-plane low-rise intake good for high RPM. Ideal for applications with limited hood clearance. For top-end HP and adequate throttle response. Not for mileage or emissions applications. For trucks or vans use PN(2701) instead. Not for LT1 or Chevy bowtie heads. Not for 1987 and later stock aluminum heads. Available in cast or polished.
Product Features:
See More
Product Features:
- 2500 to 6500 RPM High Performance Street Engines
- Single-Plane Low-Rise Intake Good for High RPM
- Ideal for Applications with Limited Hood Clearance
- For Top-End HP and Adequate Throttle Response
- Not for Mileage or Emissions Applications
- For Trucks or Vans Use PN[2701] Instead
- Not for LT1 or Chevy Bowtie Heads
- Not for 1987 and Later Stock Aluminum Heads
Edelbrock – Performer RPM AIR-Gap Small Block Chevy Black Intake Manifold (Part No.75013)
from
$525.99
Edelbrock part #75013 RPM Air-Gap RPM intake manifold is designed for 1955-86 262-400 c.i.d. Chevrolet V8’s. The award-winning RPM Air-Gap intake manifold incorporates the same race-winning technology that’s used on our Victor Series competition intakes.
Product Features:
See More
Product Features:
- 1500-6500 RPM Range
- Dual Plane Type-4150 Style Flange
- 4.2 in. Front Height, 4.72 in. Center Height, 5.25 in. Rear Height
- Black Powder Coated Finish
- Non-EGR
Edelbrock – Performer Air-Gap Intake Manifold for 1955-86 Small-Block Chevy (Part No.2601)
from
$376.99Product Features:
- Based on Performer Series with Unique Air Gap
- Air Gap Cooler and Denser Mixture for More Power
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 deg .Firing Order
- Patented Runner Design Ensures Broad Torque Curve
- Excellent Throttle Response and Mid-Range Power
- Fits Both Spread and Square Bore Carburetors
- Also in Polished/PermaStar/EnduraShine Finish
Weiand – Stealth; Intake Manifold (Part No.8150P)
from
$371.99Product Features:
- High Rise/Dual Plane Design For Maximum Torque
- Fully CNC Machined For A Perfect Fit
- Square Bore Carburetor Flange
- Exhaust Crossover For Improved Street Drivability
- Permanent Mold Casting Process
- Lighter/Smoother/Better Looking
- More Consistent Castings
Edelbrock – Performer Intake Manifold for 1955-86 Small-Block Chevy, Satin Finish (Part No.2101)
from
$257.99Product Features:
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 Deg Firing Order
- Patented Runner Design Ensures Broad Torque Curve
- Excellent Throttle Response and Mid-Range Power
- 50-State Street Legal if Correct Carburetor Used
- Accepts Late-Model Choke; Waterneck; and HEI
- Accepts A/C And Alternator
- Accepts Exhaust Heated Chokes
ARP Auto Racing – For Use With Chevy 265/ 400 Cubic", 12 Point Head Type, Polished, With Washers (Part No.434-2101)
from
$46.49
Prevent intake manifold leaks with ARP quality fasteners. They are rated at 170,000 PSI and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load distribution. Precision rolled threads prevent galling while promoting more consistent torque loading. Facilitates optimum sealing of gasket surfaces. Available in choice of black oxide finish chrome moly or corrosion resistant stainless steel, as well as hex or 12 point heads.
Product Features:
See More
Product Features:
- Nominally Rated At 170,000 PSI Tensile Strength
- Precision Machined Threads For Secure Engagement, And Would not Rust
- Wide Under Head Flange And Companion Washers Provide Even Load Distribution
- Precision Rolled Threads Prevent Galling While Promoting More Consistent Torque Loading
- Facilitates Optimum Sealing Of Gasket Surfaces
ARP Auto Racing – For Use With Chevy 265/ 400 Cubic", Hex Style Head Type, Polished, Ss (Part No.434-2001)
from
$46.49
Prevent intake manifold leaks with ARP quality fasteners. They are rated at 170,000 PSI and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load distribution. Precision rolled threads prevent galling while promoting more consistent torque loading. Facilitates optimum sealing of gasket surfaces. Available in choice of black oxide finish chrome moly or corrosion resistant stainless steel, as well as hex or 12 point heads.
Product Features:
See More
Product Features:
- Nominally Rated At 170,000 PSI Tensile Strength
- Precision Machined Threads For Secure Engagement, And Would not Rust
- Wide Under Head Flange And Companion Washers Provide Even Load Distribution
- Precision Rolled Threads Prevent Galling While Promoting More Consistent Torque Loading
- Facilitates Optimum Sealing Of Gasket Surfaces
- 1″ Long
Mr. Gasket – Intake Manifold Bolt Set – Chevrolet Small Block – Socket Head 3/8"-16 X 1" Bolts & Washers (Part No.956G)
from
$17.49
These grade 5 hex head bolts are brite zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 3/8 inch-16 x 1 inch bolts & washers
Product Features:
See More
Product Features:
- Zinc plated to resist corrosion and provide a clean professional appearance
- Made from Grade 5 steel for strength and durability
- Flat washers provide uniform clamp load and prevent galling on aluminum intake manifolds
- Allen (socket) Head
- Zinc Plated For Protection
Spectre – Bolt Kit Intake Hex Head (Part No.4652)
from
$9.99
Spectre’s Intake Bolt and Washer Set is engineered to provide premium quality hardware for Chevrolet 265-400 and Chrysler 273-440 small block engines. Measuring 3/8 inch-16 by 1 inch, these grade 5 bolts feature a corrosion resistant zinc-plated finish and hex heads to ensure easy installation. This kit includes 12 bolts and washers.
Product Features:
See More
Product Features:
- Designed for Chevrolet 265-400 and Chrysler 273-440 small block engines
- 3/8 inch-16 by 1 inch bolts
- Kit includes 12 bolts and washers
- Manufactured from high quality steel
- Bolts feature hex heads
Mr. Gasket – Intake Manifold Bolts (Part No.955G)
from
$15.49
These grade 5 socket head bolts are zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 3/8-16 x 1 inch bolts & washers.
Product Features:
See More
Product Features:
- Grade 5 socket head bolts are zinc plated for protection and appearance
- Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds
- Washers Included
Popular 1964 Chevrolet Suburban Air Intakes Categories
1964 Chevrolet Suburban Air Intakes
You count on your 1964 Chevrolet Suburban to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Air Intakes. With 43 Air Intakes ranging in price from $1.99 to $1,776.99, you’re sure to find everything you need for your 1964 Chevrolet Suburban.
Brands matter. If you want to shop a specific Air Intakes brand, we stock 9 different brands like Mr. Gasket, Felpro, and Spectre. 1964 Chevrolet Suburban Air Intakes start as low as $1.99!
One of the best ways to find top quality OEM or aftermarket Air Intakes is by asking professionals. Short of that, you can shop with confidence thanks to our 20 extensive product reviews on 1964 Chevrolet Suburban Air Intakes. Some of the top-rated Air Intakes products we carry are Remanufactured Carburetor 1 Barrel with 4.5 stars and Keith Dorton Series; Intake Manifold with 5.0 stars.
Did we mention you can order your Air Intakes from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Air Intakes inventory for your 1964 Chevrolet Suburban below to get started!
Top-Rated Air Intakes Brands For Your 1964 Chevrolet Suburban
Trusted Air Intakes OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1964 Chevrolet Suburban running right for years to come. In our inventory you’ll find brands like Mr. Gasket, Felpro, Spectre, and even more.
Popular Edelbrock Air Intakes
You’ll find popular Edelbrock brand products across Intake Manifold Parts. All are waiting to get your 1964 Chevrolet Suburban back on the road. Some of the top-rated Edelbrock products in these categories are:
from
$257.99
(3)
Performer Intake Manifold for 1955-86 Small-Block Chevy, Satin Finish
Intake Manifolds
Top-Rated Air Intakes
If are what you’re looking for, our inventory holds plenty. We stock brand Air Intakes for your 1964 Chevrolet Suburban, and some of our most reviewed parts include:
FAQs for 1964 Chevrolet Suburban Air Intakes
What are the most purchased Air Intakes for the 1964 Chevrolet Suburban?
Out of 43 Air Intakes for the 1964 Chevrolet Suburban, the most popular in our inventory are:
from
$1.99
This product is not rated
Carburetor Mounting Gasket
Carburetor and Injector Mount Gaskets
What are the top-rated 1964 Chevrolet Suburban Air Intakes?
Top-rated Air Intakes for your 1964 Chevrolet Suburban based on customer reviews/ratings are:
from
$491.99
(1)
Keith Dorton Series; Intake Manifold
“This is a excellent choice for dirt circle track racing for sbc in the 350-377 range.”
