1964 Chevrolet G10 Van Distributors

Essential 1964 Chevrolet G10 Van Distributors

Carquest – Distributor Rotor (Part No.23A1019)

Distributor Rotor

from

$5.49
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • High-quality products that meet OE appearance and performance to
See More

Carquest Premium – Distributor Rotor (Part No.DAA1004)

Distributor Rotor

from

$6.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest – Distributor Rotor (Part No.D152)

Distributor Rotor

from

$8.99
BWD SELECT designs, specifies, and manufactures replacement parts with one goal in mind-make them the very best. To maximize performance and longevity, we use the finest materials and improve on OE specifications, whenever possible.

Product Features:
  • High-quality direct replacement electrical connector allows you to replace only the damaged connector instead of the entire harness for a cost-effective repair
  • The terminal is manufactured with high grade materials such as copper alloy, brass, and phosphor bronze.  The housing is fabricated using polyamide resins.  All of the materials together provide the connectors with prolonged life and superior performance.
  • All electrical connectors are 100% tested for proper mechanical and electrical fit, form and function
  • Offering thousands of high-quality pigtails & sockets for nearly every electrical job
See More

Carquest Premium – Distributor Rotor (Part No.DAA1011)

Distributor Rotor

from

$7.49
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

MSD Ignition – Distributor Gear; MSD Chevy Distributor; .500 ID; Iron (Part No.8531)

Distributor Gear; MSD Chevy Distributor; .500 ID; Iron

from

$54.39
This gear test fixture features variable rpm and oil pressure control allowing MSD engineers the ability to maintain the exact conditions that they want for gear tests. Severe loads can be placed on the gear and the fixture can spin up to 10,000 rpm. Features increased outer hardened layer thickness (RC 55-60). Micro polished surface for smooth contact. Proprietary formulated ductile iron. Melonite QPQ coated reduces friction and initial wear. Interstitial carbide concentration improves wear resistance and running properties.

Product Features:
  • Increased outer hardened layer thickness (RC 55-60)
  • Micro Polished Surface For Smooth Contact
  • Proprietary formulated ductile iron.
  • Melonite QPQ coated reduces friction and initial wear
  • Interstitial carbide improves wear resistance/running properties
See More

Accel – Dist:Chev V8 Hei Vac (Part No.59107)

Dist:Chev V8 Hei Vac

from

$190.99
ACCEL Performance Replacement Distributors are the perfect choice for your daily driver or street machine. Using all new components, these distributors feature High-performance ACCEL Electronics. All new components-housings are either new castings or turned from billet stock, centerless ground shaft with oil lite bushings. High dielectric strength cap, balanced rotor. Male tower distributor cap with brass cap and rotor contacts (Ford and AMC Models feature screw-mounted wire retainer for the ultimate plug wire retention). Iron or steel distributor gear. Direct plug-in replacement with factory-type connectors for plug and play installation.

Product Features:
  • Direct Plug In Factory Replacement Plug And Play
  • CNC Machined 6061 T6 Billet Aluminum Housing
  • High Dielectric Strenght Thermoplastic Cap With Br
  • 4 Topin Module With Dwell Control Triggers At 75 R
  • Easy Access Fully Adjustable Mechanical Advance
  • Adjustable Vacuum Advance
  • Fit non computerized vehicles
  • High performance 4 pin module
  • Steel alloy drive gear compatible with either flat tappet or hydraulic roller camshafts.
  • All new components
See More

Mallory – Unilite Dist. Oldsmobile 330-455 (Part No.3763401)

Unilite Dist. Oldsmobile 330-455

from

$538.99
The industry standard with adjustable mechanical advance curve. Triggered by photo-optic infrared LED system. Improved combustion efficiency and economy, increased spark plug life and cold weather starting, and maintenance free operation.

Product Features:
  • Improved Combustion And Economy
  • Increased Spark Plug Life
  • Improved Cold Weather Starting
  • Maintenance Free Operation
  • Accurate Spark Timing
  • Self-Lubricating Bushings
  • Years Of Trouble-Free Service
See More

Mallory – Unilite Electronic Ignition Distributor Series 37 (Part No.3748201)

Unilite Electronic Ignition Distributor Series 37

from

$437.99
The industry standard with adjustable mechanical advance curve. Triggered by photo-optic infrared LED system. Improved combustion efficiency and economy, increased spark plug life and cold weather starting, and maintenance free operation.

Product Features:
  • Improved Combustion And Economy
  • Increased Spark Plug Life
  • Improved Cold Weather Starting
  • Maintenance Free Operation
  • Accurate Spark Timing
  • Self-Lubricating Bushings
  • Years Of Trouble-Free Service
See More

Carquest Premium – Distributor T1835: 100% New, With Cap and Rotor (Part No.T1835)

Distributor T1835: 100% New, With Cap and Rotor

from

$129.99
Carquest Premium distributors are built to meet or exceed the original equipment (OE) specifications for each application. Our distributors are built by a manufacturer that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each distributor is supplied with the cap, rotor and any seals needed for installation. Carquest Premium distributors are 100% new and undergo extensive validation testing to ensure long-lasting ignition performance and reliability.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • 100% new unit with no core charges
  • Precision machined shafts result in high speed accuracy and help prevent bearing failures
  • Every distributor is tested to ensure reliable and long-lasting performance
  • O-rings or gaskets included where applicable
  • Precision Engineered ignition modules and plugs ensure proper performance plus precise connection.
  • Precision machined and ground shafts assure high speed accuracy and prevent bearing failures.
  • Original Equipment Equivalent high voltage ignition coils.
  • 100% New Components and fasteners eliminate premature failures.
See More

MSD Ignition – Distributor; Chevy In-line 6-cyl.; 250/292 (Part No.8515)

Distributor; Chevy In-line 6-cyl.; 250/292

from

$593.99
Chevy produced a number of inline-6 engines over the years, some dinky powerless wonders and others that can be made to put out some pretty impressive torque and power numbers. For those that dare to be different or want to stick with original power plants, MSD has a distributor for you. While you may not see many 194 Cu. In. engines being built, the 250 and 292 are showing up more and more. This distributor fits them all, including the 230. Like all MSD Pro-Billet distributor, this housing is crafted from billet aluminum and MSD bolts in a non-magnetic pickup to fire the mandatory ignition control. There’s a vacuum advance to assist with economy and the adjustable mechanical advance makes it easy to tune in a specific curve. Pro-Billet inline-6, 194, 230, 250, 292 – PN 8515 note: must be used with an MSD 6, 7 or 8-series ignition.

Product Features:
  • Designed For Street/Performance Use w/Mech or Vacuum Advance
  • Will not fit 235 and 261 engines
  • Must Be Used w/An MSD Ignition Control
  • Supplied w/Socket Style Distributor Cap And Rotor
  • O-ring seals can be installed for oil press. control (Mods only)
  • Special oil tract improves lubrication to the dist./cam gear
  • Nylon pads ensure smooth operation of the advance weights
  • Advance weight pins are staked and tig welded to the plate
  • Mech. advance assem. can be locked out for crank trigger systems
  • Advance plate and weights are fine blanked from chrome moly steel
  • QPQ coated for friction reduction
  • QPQ coated polished steel shaft; guided by sealed ball bearings
See More

PerTronix – D4051 Flame-Thrower HEI Distributor Cap Red (Part No.D4051)

D4051 Flame-Thrower HEI Distributor Cap Red

from

$37.99
Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provi

Product Features:
  • PerTronix D4051 Flame-Thrower HEI Distributor Cap Red
  • Made from hi-performance 60 KV rated alkyd molding compound.
See More

PerTronix – D600700 Cap Black and Rotor 8 cylinder Flame-Thrower Billet Distributor (Part No.D600700)

D600700 Cap Black and Rotor 8 cylinder Flame-Thrower Billet Distributor

from

$41.99
Replacement distributor cap and rotor for Flame-Thrower billet and cast distributors. High dielectric strength cap with male or female brass terminals with premium rotor with brass contact.

Product Features:
  • PerTronix D600700 Cap Black and Rotor 8 cylinder Flame-Thrower Billet Distributor
  • Replacement distributor cap and rotor for Flame-Thrower billet and cast distributors
See More

ACDelco – Ignition Distributor Cap (Part No.D308R)

Ignition Distributor Cap

from

$24.29
ACDelco Professional Distributor Cap is a high quality aftermarket replacement component for one or more of the following vehicle systems: cooling, hvac, ignition, starting and charging, body-electrical and lighting, wiper and washer, and/or engine fuel management. This premium aftermarket cap is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

PerTronix – D600701 Cap Red and Rotor 8 cylinder Flame-Thrower Billet Distributor (Part No.D600701)

D600701 Cap Red and Rotor 8 cylinder Flame-Thrower Billet Distributor

from

$44.99
Replacement distributor cap and rotor for Flame-Thrower billet and cast distributors. High dielectric strength cap with male or female brass terminals with premium rotor with brass contact.

Product Features:
  • PerTronix D600701 Cap Red and Rotor 8 cylinder Flame-Thrower Billet Distributor
  • Replacement distributor cap and rotor for Flame-Thrower billet and cast distributors
See More

Carquest Premium – Distributor Cap (Part No.CAC1082)

Distributor Cap

from

$21.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Distributor Cap (Part No.CAE1058)

Distributor Cap

from

$16.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Mr. Gasket – Hei Advance Curve Kit (Part No.929G)

Hei Advance Curve Kit

from

$16.49
One of the best, and sometimes missed tuning tricks is not to just optimize your initial timing, but to bring in timing advance more quickly than the stock distributor can allow. Bringing timing more quickly than stock can provide substantial increases in both torque and horsepower depending on your combination.This is done by changing the springs under the cap. This kit includes three sets of springs which can be used in different combinations to provide full advance sooner than stock. Use lighter springs to bring the advance more quickly, and heavier springs to bring it in more slowly. Two new weights with nylon bushings are also included as are instructions to help with installation. Springs are color code as follows: Light Springs – Black Medium Springs – Silver Heavy Springs – Gold

Product Features:
  • Brings in timing more quickly than stock for more torque and horsepower
  • Includes three sets of springs to allow for a wider range of custom tuning
  • Instructions included to help with installation
See More

Felpro – Distributor Mounting Gasket (Part No.12665)

Distributor Mounting Gasket

from

$1.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Validated for fit, form and function
  • Unsurpassed quality you can trust
See More

Felpro – DISTRIBUTOR MOUNTING GASKET (Part No.70194)

DISTRIBUTOR MOUNTING GASKET

from

$2.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Validated for fit, form and function
  • Unsurpassed quality you can trust
See More

Carquest Premium – Distributor Vacuum Advance (Part No.VBC1016)

Distributor Vacuum Advance

from

$32.49
The distributor is just one piece of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.

Product Features:
  • All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
See More

PerTronix – D702700 Vacuum Lockout Kit for Flame-Thrower Clockwise Billet Distributor (Part No.D702700)

D702700 Vacuum Lockout Kit for Flame-Thrower Clockwise Billet Distributor

from

$18.99


Product Features:
  • PerTronix D702700 Vacuum Lockout Kit for PerTronix Flame-Thrower Clockwise Billet Distributor
  • Replacement Part (only) for PerTronix Flame Thrower Distributors
See More

PerTronix – D701700 Vacuum Canister for Flame-Thrower Billet Distributor (Part No.D701700)

D701700 Vacuum Canister for Flame-Thrower Billet Distributor

from

$36.99


Product Features:
  • PerTronix D701700 Vacuum Canister for PerTronix Flame-Thrower Billet Distributor
  • Replacement Part (only) for PerTronix Flame Thrower Distributors
See More

PerTronix – D9010 Flame-Thrower HEI Distributor Clockwise Vacuum Lockout Kit (Part No.D9010)

D9010 Flame-Thrower HEI Distributor Clockwise Vacuum Lockout Kit

from

$10.99
Vacuum Advance & LockoutThese vacuum canisters help optimize ignition advance for maximum part throttle performance and cruise speed efficiency. Our vacuum lockout plates allow for precise pickup coil position and accurate rotor phasing.

Product Features:
  • PerTronix D9010 Flame-Thrower HEI Distributor Clockwise Vacuum Lockout Kit
  • These vacuum canisters help optimize ignition advance for maximum part throttle performance and cruise speed efficiency.
See More

Carquest Premium – Distributor Vacuum Advance (Part No.VBC1015)

Distributor Vacuum Advance

from

$31.99
The distributor is just one piece of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.

Product Features:
  • All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
See More

PerTronix – D9006 Flame-Thrower HEI Distributor Adjustable Vacuum Advance Canister (Part No.D9006)

D9006 Flame-Thrower HEI Distributor Adjustable Vacuum Advance Canister

from

$30.99
Vacuum Advance & LockoutThese vacuum canisters help optimize ignition advance for maximum part throttle performance and cruise speed efficiency. Our vacuum lockout plates allow for precise pickup coil position and accurate rotor phasing.

Product Features:
  • PerTronix D9006 Flame-Thrower HEI Distributor Adjustable Vacuum Advance Canister
  • These vacuum canisters help optimize ignition advance for maximum part throttle performance and cruise speed efficiency.
See More

MSD Ignition – Vacuum Advance Mechanism (PN 8460/PN 8461) (Part No.8463)

Vacuum Advance Mechanism (PN 8460/PN 8461)

from

$36.49
This is the replacement canister for MSD distributors equipped with vacuum advance (except the PN 8365 and PN 8362 HEI distributors.)

Product Features:
  • Replacement Canister
  • Vacuum Advance Mechanism
  • For Replacement On PN[8460/8461]
  • Size Replacement Canister For Distributor PN[8360/8361]
See More

MSD Ignition – Vacuum Advance Lockout; PN 8360; PN 8361; PN 8572 (Part No.8468)

Vacuum Advance Lockout; PN 8360; PN 8361; PN 8572

from

$14.49
This bracket allows you to easily remove the vacuum advance from MSD distributors that are CW rotation (except PN 8365 and PN 8362).

Product Features:
  • Vacuum Advance Lockout
  • Distributor Accessories
  • For Use On PN[8360/8361/8572]
  • Size Can Be Used w/Distributor PN[8360/8361/8572]
See More

Carquest Premium – Distributor Vacuum Advance (Part No.VBC1088)

Distributor Vacuum Advance

from

$14.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

1964 Chevrolet G10 Van Distributors

Maybe you’re in the middle of a full rebuild of that 1964 Chevrolet G10 Van. Maybe you just need a couple of Distributors. Either way, Advance Auto Parts has 11 different Distributors in our inventory ranging from $1.49 to $593.99. That means you can find the exact parts or products you need to keep that 1964 Chevrolet G10 Van running smoothly.

Distributors are only as good as their brand. We stock 4 different brands to make sure you have plenty of trusted parts to choose from for your 1964 Chevrolet G10 Van. Carquest, Carquest Premium, and Felpro are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Distributors for your 1964 Chevrolet G10 Van, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Distributors to keep your 1964 Chevrolet G10 Van rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Distributors Brands To Make Your 1964 Chevrolet G10 Van Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1964 Chevrolet G10 Van demands trusted brand parts and products to keep it running. Many trusted brands of Distributors make up Advance Auto Parts’ inventory, and all are ready to help make your G10 Van the best it can be. Be sure to browse some of our top Distributors brands and parts.

Popular Carquest Distributors

We carry Carquest parts in our stock across Distributor Cap Kits and Distributor Rotor Buttons categories, plus more. For a 1964 Chevrolet G10 Van, our most popular Carquest Distributors include:
Distributor Cap
from $14.99
(2)
Distributor Cap
Distributor Cap Kits
Distributor Rotor
from $8.99
(2)
Distributor Rotor
Distributor Rotor Buttons

FAQs for 1964 Chevrolet G10 Van Distributors

What are the most purchased Distributors for the 1964 Chevrolet G10 Van?

Out of 11 Distributors for the 1964 Chevrolet G10 Van, the most popular in our inventory are:
Distributor Rotor
from $7.49
This product is not rated
Distributor Rotor
Distributor Rotor Buttons
Distributor Cap
from $9.99
This product is not rated
Distributor Cap
Distributor Cap Kits
Distributor Mounting Gasket
from $1.49
This product is not rated
Distributor Mounting Gasket
Distributor Small Parts